Test Report

FCC ID: VG8XM134AYY

Test Report

Download: PDF
FCCID_1289811

FCC PART 18 EMI MEASUREMENT AND TEST REPORT For Foshan Shunde Midea Microwave and Electrical Appliances Manufacturing Co., Ltd. NO.18 Huanzhen West Road, Beijiao, Shunde, Foshan, Guangdong, China 528311 FCC ID: VG8XM134AYY Report Type: Product Type: Original Report Microwave Oven Test Engineer: Jessica He Report No.: RSZ10031551 Report Date: 2010-05-28 Lisa Zhu Reviewed By: EMC Engineer Prepared By: Bay Area Compliance Laboratories Corp. (Shenzhen) 6/F, the 3rd Phase of WanLi Industrial Building, ShiHua Road, FuTian Free Trade Zone Shenzhen, Guangdong, China Tel: +86-755-33320018 Fax: +86-755-33320008 Note: This test report is prepared for the customer shown above and for the device described herein. It may not be duplicated or used in part without prior written consent from Bay Area Compliance Laboratories Corp. This report must not be used by the customer to claim product certification, approval, or endorsement by NVLAP*, NIST, or any agency of the Federal Government. * This report may contain data that are not covered by the NVLAP accreditation and are marked with an asterisk “*” (Rev.2)

Foshan Shunde Midea Microwave and Electrical Appliances Manufacturing Co., Ltd. FCC ID: VG8XM134AYY TABLE OF CONTENTS GENERAL INFORMATION.......................................................................................................................................3 PRODUCT DESCRIPTION FOR EQUIPMENT UNDER TEST (EUT) ....................................................................................3 OBJECTIVE ...................................................................................................................................................................3 RELATED SUBMITTAL(S)/GRANT(S).............................................................................................................................3 TEST METHODOLOGY ..................................................................................................................................................3 TEST FACILITY .............................................................................................................................................................3 OPERATING CONDITION/TEST CONFIGURATION..........................................................................................5 JUSTIFICATION .............................................................................................................................................................5 EQUIPMENT MODIFICATIONS .......................................................................................................................................5 EXTERNAL CABLE LIST AND DETAILS .........................................................................................................................5 CONFIGURATION OF TEST SETUP .................................................................................................................................5 BLOCK DIAGRAM OF TEST SETUP ................................................................................................................................5 CONDUCTED EMISSIONS ........................................................................................................................................6 MEASUREMENT UNCERTAINTY ....................................................................................................................................6 EUT SETUP ..................................................................................................................................................................6 EMI TEST RECEIVER SETUP .........................................................................................................................................7 TEST EQUIPMENT LIST AND DETAILS ...........................................................................................................................7 TEST PROCEDURE ........................................................................................................................................................7 TEST RESULTS SUMMARY ............................................................................................................................................7 TEST DATA ..................................................................................................................................................................7 RADIATION HAZARD MEASUREMENT.............................................................................................................10 ENVIRONMENTAL CONDITIONS ..................................................................................................................................10 TEST EQUIPMENT LIST AND DETAILS .........................................................................................................................10 RADIATION HAZARD MEASUREMENT ........................................................................................................................10 INPUT POWER .............................................................................................................................................................11 LOAD FOR MICROWAVE OVENS .................................................................................................................................11 RF OUTPUT POWER MEASUREMENT ..........................................................................................................................12 OPERATING FREQUENCY MEASUREMENT ..................................................................................................................13 RADIATED EMISSIONS...........................................................................................................................................16 MEASUREMENT UNCERTAINTY ..................................................................................................................................16 EUT SETUP ................................................................................................................................................................16 EMI TEST RECEIVER SETUP AND SPECTRUM ANALYZER SETUP................................................................................16 TEST EQUIPMENT LIST AND DETAILS .........................................................................................................................17 TEST PROCEDURE ......................................................................................................................................................17 CORRECTED AMPLITUDE & MARGIN CALCULATION .................................................................................................17 TEST RESULTS SUMMARY ..........................................................................................................................................17 TEST DATA AND PLOTS ..............................................................................................................................................18 Report #: RSZ10031551 Page 2 of 19 FCC Part 18 Test Report

Foshan Shunde Midea Microwave and Electrical Appliances Manufacturing Co., Ltd. FCC ID: VG8XM134AYY GENERAL INFORMATION Product Description for Equipment Under Test (EUT) The Foshan Shunde Midea Microwave and Electrical Appliances Manufacturing Co., Ltd.’s model: EM134AMV (FCC ID: VG8XM134AYY) or the “EUT” as referred to in this report is a Microwave Oven which measures approximately 51.5cm L x 40.0cm W x 29.5cm H, rated input voltage: AC 120 V/60 Hz. *Note: The series products, model XM134AYY, more detail description as follows: 1. where YY is alphabetic characters. YY: Suffix could be from 0 to 9 or from A to Z (Cosmetic Design). 2. X=E, E: Touch Pad type. * All measurement and test data in this report was gathered from production sample serial number: 1003516 (Assigned by BACL, Shenzhen). The EUT was received on 2010-03-15. Objective The following test report is prepared on behalf of Foshan Shunde Midea Microwave and Electrical Appliances Manufacturing Co., Ltd. in accordance with Part 2, Subpart J, and Part 18, Subparts A, B and C of the Federal Communication Commissions rules and regulations. The objective of the manufacturer is to determine compliance with FCC Part 18 limits. Related Submittal(s)/Grant(s) No related submittal(s). Test Methodology All measurements contained in this report were conducted with MP-5, FCC Methods of Measurements of Radio Noise Emissions from ISM Equipment, February 1986. All measurements were performed at Bay Area Compliance Laboratory Corporation. The radiated testing was performed at an antenna-to-EUT distance of 3 meters. Test Facility The Test site used by Bay Area Compliance Laboratories Corp. (Shenzhen) to collect test data is located in the 6/F, the 3rd Phase of WanLi Industrial Building, ShiHua Road, FuTian Free Trade Zone Shenzhen, Guangdong, China. Test site at Bay Area Compliance Laboratories Corp. (Shenzhen) has been fully described in reports submitted to the Federal Communication Commission (FCC). The details of these reports have been found to be in compliance with the requirements of Section 2.948 of the FCC Rules on November 21, 2007. The facility also complies with the radiated and AC line conducted test site criteria set forth in ANSI C63.4-2003. Report #: RSZ10031551 Page 3 of 19 FCC Part 18 Test Report

Foshan Shunde Midea Microwave and Electrical Appliances Manufacturing Co., Ltd. FCC ID: VG8XM134AYY The Federal Communications Commission has the reports on file and is listed under FCC Registration No.: 382179. The test site has been approved by the FCC for public use and is listed in the FCC Public Access Link (PAL) database. Additionally, Bay Area Compliance Laboratories Corp. (Shenzhen) is a National Institute of Standards and Technology (NIST) accredited laboratory, under the National Voluntary Laboratory Accredited Program (Lab Code 200707-0). The current scope of accreditations can be found at http://ts.nist.gov/Standards/scopes/2007070.htm Report #: RSZ10031551 Page 4 of 19 FCC Part 18 Test Report

Foshan Shunde Midea Microwave and Electrical Appliances Manufacturing Co., Ltd. FCC ID: VG8XM134AYY OPERATING CONDITION/TEST CONFIGURATION Justification The EUT was provided for tests as a stand-alone device. It was prepared for testing in accordance with the manufacturer’s instructions. The EUT was operated at maximum (continuous) RF output power. The loads consisted of water in a glass beaker in the amounts specified in the test procedure. Equipment Modifications No modifications were made to the unit tested. External Cable List and Details Cable Description Length (m) From/Port To Unshield Undetachable AC Power Cable 1.3 EUT LISN Configuration of Test Setup Block Diagram of Test Setup LISN EUT 1.0 Meter Non-Conducting Table 80 cm above Ground Plane 1.5 Meters Report #: RSZ10031551 Page 5 of 19 FCC Part 18 Test Report

Foshan Shunde Midea Microwave and Electrical Appliances Manufacturing Co., Ltd. FCC ID: VG8XM134AYY CONDUCTED EMISSIONS Measurement Uncertainty All measurements involve certain levels of uncertainties, especially in field of EMC. The factors contributing to uncertainties are spectrum analyzer, cable loss, and LISN. Based on NIS 81, The Treatment of Uncertainty in EMC Measurements, the best estimate of the uncertainty of any conducted emissions measurement at Bay Area Compliance Laboratories Corp. (Shenzhen) is +2.4 dB. EUT Setup The setup of EUT is according with per MP-5: 1986 measurement procedure. Specification used was with the FCC Part 18. The EUT was connected to a 120 VAC/ 60Hz power source. Report #: RSZ10031551 Page 6 of 19 FCC Part 18 Test Report

Foshan Shunde Midea Microwave and Electrical Appliances Manufacturing Co., Ltd. FCC ID: VG8XM134AYY EMI Test Receiver Setup The EMI test receiver was set to investigate the spectrum from 150 kHz to 30 MHz. During the conducted emission test, the EMI test receiver was set with the following configurations: Frequency Range IF B/W 150 kHz – 30 MHz 9 kHz Test Equipment List and Details Serial Calibration Calibration Manufacturer Description Model Number Date Due Date Rohde & Schwarz EMI Test Receiver ESCS30 830245/006 2009-04-28 2010-04-27 Rohde & Schwarz L.I.S.N. ESH2-Z5 892107/021 2009-04-28 2010-04-27 * Com-Power’s LISN were used as the supporting equipment. * Statement of Traceability: Bay Area Compliance Laboratories Corp. (Shenzhen) attests that all calibrations have been performed in accordance to NVLAP requirements, traceable to the NIST. Test Procedure During the conducted emission test, the EUT power cord was connected to the outlet of the LISN. Maximizing procedure was performed on the six (6) highest emissions of the EUT. All data was recorded in the Quasi-peak and average detection mode. Test Results Summary According to the recorded data in following table, the EUT complied with the FCC Part 18, with the worst margin reading of: 21.36 dB at 0.150 MHz in the Line conductor mode 19.11 dB at 0.160 MHz in the Neutral conductor mode Test Data Environmental Conditions Temperature: 25° C Relative Humidity: 48% ATM Pressure: 100.2kPa The testing was performed by Jessica He on 2010-03-18. Test Mode: Running (Max Power) Report #: RSZ10031551 Page 7 of 19 FCC Part 18 Test Report

Foshan Shunde Midea Microwave and Electrical Appliances Manufacturing Co., Ltd. FCC ID: VG8XM134AYY 120V/60Hz, Line: Correction Cord. Frequency Limit Margin Factor Result Remark (MHz) (dBµV) (dB) (dB) (dBµV) 0.150 10.10 44.64 66.00 21.36 QP 0.350 10.10 29.23 59.07 29.84 QP 0.440 10.10 26.44 57.09 30.65 QP 29.930 10.30 15.70 48.00 32.30 QP 0.350 10.10 12.12 49.07 36.95 AV 0.150 10.10 18.04 56.00 37.96 AV 0.440 10.10 8.13 47.09 38.96 AV 24.790 10.30 11.01 50.00 38.99 AV 24.790 10.30 19.92 60.00 40.08 QP 29.770 10.30 9.62 50.00 40.38 AV 26.000 10.30 8.29 50.00 41.71 AV 26.230 10.30 14.82 60.00 45.18 QP Report #: RSZ10031551 Page 8 of 19 FCC Part 18 Test Report

Foshan Shunde Midea Microwave and Electrical Appliances Manufacturing Co., Ltd. FCC ID: VG8XM134AYY 120V/60Hz, Neutral: Correction Cord. Frequency Limit Margin Factor Result Remark (MHz) (dBµV) (dB) (dB) (dBµV) 0.160 10.10 46.45 65.56 19.11 QP 24.210 10.30 26.36 50.00 23.64 AV 0.560 10.10 21.67 56.00 34.33 QP 1.230 10.10 11.65 46.00 34.35 AV 0.160 10.10 20.21 55.56 35.35 AV 0.560 10.10 9.93 46.00 36.07 AV 24.240 10.30 19.18 60.00 40.82 QP 27.640 10.30 19.18 60.00 40.82 QP 28.640 10.30 8.60 50.00 41.40 AV 27.640 10.30 8.13 50.00 41.87 AV 1.220 10.10 12.19 56.00 43.81 QP 28.680 10.30 11.89 60.00 48.11 QP Report #: RSZ10031551 Page 9 of 19 FCC Part 18 Test Report

Foshan Shunde Midea Microwave and Electrical Appliances Manufacturing Co., Ltd. FCC ID: VG8XM134AYY RADIATION HAZARD MEASUREMENT Environmental Conditions Temperature: 25° C Relative Humidity: 56% ATM Pressure: 100.2kPa Test Equipment List and Details Serial Calibration Calibration Manufacturer Description Model Number Date Due Date Rohde & Schwarz EMI Test Receiver ESCI 100035 2009-11-24 2010-11-24 Sunol Sciences Horn Antenna DRH-118 A052604 2009-05-05 2010-05-04 HP Preamplifier 8449B 3008A00277 2009-09-12 2010-09-11 Digital Power Ainuo 8732B 028706117 2009-12-23 2010-12-23 Analyzer HY AC Power Source 9020117 GY053(1) 2009-08-21 2010-08-21 Holday Leakage Meter HI-1710 05/2731 2009-06-02 2010-06-02 * Statement of Traceability: Bay Area Compliance Laboratories Corp. (Shenzhen) attests that all calibrations have been performed in accordance to NVLAP requirements, traceable to the NIST. Radiation Hazard Measurement Radiation leakage was measured in the as-received condition with the oven door closed using a microwave leakage meter. A 1000ml water load was placed in the center of the oven and the oven was operated at maximum output power. There was no microwave leakage exceeding a power level of 0.71mW/cm2 observed at any point 5cm or more from the external surface of the oven. A maximum of 1.0mW/cm2 is allowed in accordance with the applicable Federal Standards. Hence, microwave leakage in the as-received condition with the oven door closed was below the maximum allowed. Report #: RSZ10031551 Page 10 of 19 FCC Part 18 Test Report

Foshan Shunde Midea Microwave and Electrical Appliances Manufacturing Co., Ltd. FCC ID: VG8XM134AYY Input Power Input power and current was measured using a power analyzer. A 1000ml water load was placed in the center of the oven and the oven was operated at maximum output power. A 1000ml water load was chosen for its compatibility with the procedure commonly used by manufacturers to determine their input ratings. Input Voltage Input Current Measured Input Power Rated Input Power (Vac/Hz) (Amps) (Watts) (Watts) 120/60 13.05 1567 1500 Based on the measured input power, the EUT was found to be operating within the intended specifications. Load for Microwave Ovens For all measurements, the energy developed by the oven was absorbed by a dummy load consisting of a quantity of tap water in a beaker. If the oven was provided with a shelf or other utensil support, this support was in its initial normal position. For ovens rated at 1000 watts or less power output, the beaker contained quantities of water as listed in the following subparagraphs. For ovens rated at more than 1000watts output, each quantity was increased by 50% for each 500watts or fraction thereof in excess of 1000watts. Additional beakers were used if necessary. ● Load for power output measurement: 1000 milliliters of water in the beaker located in the center of the oven. ● Load for frequency measurement: 1000 milliliters of water in the beaker located in the center of the oven. ● Load for measurement of radiation on second and third harmonic: Two loads, one of 700 and the other of 300 milliliters, of water are used. Each load is tested both with the beaker located in the center of the oven and with it in the right front corner. The RF output power is rated at 1000 watts Load used for power output measurement = 1000 milliliters of water Load used for frequency measurement = 1000 milliliters of water Load used for harmonic measurement = 700 & 300 milliliters of water Load used for other measurement = 700 milliliters of water Report #: RSZ10031551 Page 11 of 19 FCC Part 18 Test Report

Foshan Shunde Midea Microwave and Electrical Appliances Manufacturing Co., Ltd. FCC ID: VG8XM134AYY RF Output Power Measurement The Caloric Method was used to determine maximum RF output power. The initial temperature of the water load was measured. The water load was placed in the center of the oven. The oven was operated at maximum output power for 200 seconds, the temperature of the water was re-measured. Quality of Water Starting Temperature Final Temperature Elapsed Time (ml) (ºC) (ºC) (s) 1000 20 59.9 200 Power = (4.2 joules/calorie) (volume in milliliters) (temperature rise)/ (time is seconds) Power = 4.2 joules/calorie x 1000 x (59.9-20) / 200 Power = 837.9 watts The measurement output power was found to be less than 500watts. Therefore, in accordance with Section 18.305 of Subpart-C, the measured out-of-band emissions were compared to the limit of 25μV/meter at a 300-meter measurement distance. The measured output power was found to exceed 500watts. Therefore, in accordance with Section 18.305 of Subpart-C, the measured out-of-band emissions were compared with the limit calculated as following: LFS = 25*SQRT (Power Output/500) LFS = 25*SQRT (837.9/500) LFS ≈ 32.4 Where: LFS is the maximum allowable field strength for out-of-band emissions in μV/meter at a 300- meter measurement distance. Power Output is the measured output power in watts. Manufacturer Model LFS dBμV/m@300m dBμV/m@3m Foshan Shunde Midea Microwave and Electrical EM134AMV 32.4 30.2 70.2 Appliances Manufacturing Co., Ltd. Report #: RSZ10031551 Page 12 of 19 FCC Part 18 Test Report

Foshan Shunde Midea Microwave and Electrical Appliances Manufacturing Co., Ltd. FCC ID: VG8XM134AYY Operating Frequency Measurement Variation in Operating Frequency with Time The operating frequency was measured using a spectrum analyzer. Starting with the EUT at room temperature, a 1000ml water load was placed in the center of the oven and the oven was operated at maximum output power. The fundamental operating frequency was monitored until the water load was reduced to 20 percent of the original load. The results of this test are as follows: Minimum Frequency Maximum Frequency Manufacturer Model (MHz) (MHz) Foshan Shunde Midea Microwave and Electrical EM134AMV 2471.9 2477.8 Appliances Manufacturing Co., Ltd. Refer to data pages for details of the variation in operating frequency with time measurement. Report #: RSZ10031551 Page 13 of 19 FCC Part 18 Test Report

Foshan Shunde Midea Microwave and Electrical Appliances Manufacturing Co., Ltd. FCC ID: VG8XM134AYY Variation in Operating Frequency with Line Voltage The EUT was operated / warmed by at least 10 minutes of use with a 1000ml water load at room temperature at the beginning of the test. Then the operating frequency was monitored as the input voltage was varied between 80 and 125 percent of the nominal rating. The results of this test are as follows: Line voltage varied from 96Vac to 150Vac. Minimum Frequency Maximum Frequency Manufacturer Model (MHz) (MHz) Foshan Shunde Midea Microwave and Electrical EM134AMV 2467.9 2482.0 Appliances Manufacturing Co., Ltd. Please refer to following pages for details of the variation in operating frequency with line voltage measurement. Report #: RSZ10031551 Page 14 of 19 FCC Part 18 Test Report

Foshan Shunde Midea Microwave and Electrical Appliances Manufacturing Co., Ltd. FCC ID: VG8XM134AYY Report #: RSZ10031551 Page 15 of 19 FCC Part 18 Test Report

Foshan Shunde Midea Microwave and Electrical Appliances Manufacturing Co., Ltd. FCC ID: VG8XM134AYY RADIATED EMISSIONS Measurement Uncertainty All measurements involve certain levels of uncertainties, especially in field of EMC. The factors contributing to uncertainties are spectrum analyzer, cable loss, antenna factor calibration, antenna directivity, antenna factor variation with height, antenna phase center variation, antenna factor frequency interpolation, measurement distance variation, site imperfections, mismatch (average), and system repeatability. Based on NIS 81, The Treatment of Uncertainty in EMC Measurements, the best estimate of the uncertainty of a radiation emissions measurement at Bay Area Compliance Laboratories Corp. (Shenzhen) is +4.0 dB. EUT Setup The radiated emission tests were performed in the 3 meters chamber A test site, using the setup accordance with the FCC MP - 5. The specification used was the FCC part 18 limits. The EUT was connected to 120 VAC/60 Hz power source. EMI Test Receiver Setup and Spectrum Analyzer Setup The system was investigated from 30 MHz to 25 GHz. During the radiated emission test, the EMI test receiver and Spectrum Analyzer were set with the following configurations: Frequency Range R B/W Video B/W IF B/W 30 – 1000 MHz 100 kHz 300 kHz 120 kHz Above 1GHz 1MHz 10Hz Report #: RSZ10031551 Page 16 of 19 FCC Part 18 Test Report

Foshan Shunde Midea Microwave and Electrical Appliances Manufacturing Co., Ltd. FCC ID: VG8XM134AYY Test Equipment List and Details Calibration Calibration Manufacturer Description Model Serial Number Date Due Date HP Amplifier HP8447D 2944A09795 2009-08-02 2010-08-02 Rohde & Schwarz EMI Test Receiver ESCI 100035 2009-11-07 2010-11-06 Sunol Sciences Broadband Antenna JB1 A040904-1 2010-03-11 2011-03-11 Sunol Sciences System Controller SC99V 041304-1 N/A N/A A.H. System Horn Antenna SAS-200/571 135 2009-05-17 2010-05-17 Rohde & Schwarz Spectrum Analyzer FSEM30 849720/019 2009-07-08 2010-07-08 * Statement of Traceability: Bay Area Compliance Laboratories Corp. (Shenzhen) attests that all calibrations have been performed per the NVLAP requirements, traceable to NIST. Test Procedure For the radiated emissions test, the EUT power cord was connected to the AC floor outlet. Maximizing procedure was performed on the six (6) highest emissions to ensure that the EUT complied with all installation combinations. The EUT was in the normal (naïve) operating mode during the final qualification test to represent the worst results. All data was recorded in the Quasi-peak detection mode from 30 MHz to 1 GHz and average detection mode above 1GHz. Corrected Amplitude & Margin Calculation The Corrected Amplitude is calculated by adding the Antenna Factor and Cable Loss, and subtracting the Amplifier Gain from the Meter Reading. The basic equation is as follows: Corrected Amplitude = Meter Reading + Antenna Factor + Cable Loss - Amplifier Gain The “Margin” column of the following data tables indicates the degree of compliance with the applicable limit. For example, a margin of 7dB means the emission is 7dB below the limit. The equation for margin calculation is as follows: Margin = Limit – Corrected Amplitude Test Results Summary According to the data in the following table, the EUT complied with the FCC Part 18, with the worst margin reading of: 27.3 dB at 45.762500 MHz in the Vertical polarization, below 1GHz 8.61 dB at 9917.0 MHz in the Horizontal polarization, above 1GHz Report #: RSZ10031551 Page 17 of 19 FCC Part 18 Test Report

Foshan Shunde Midea Microwave and Electrical Appliances Manufacturing Co., Ltd. FCC ID: VG8XM134AYY Test Data and Plots Environmental Conditions Temperature: 25° C Relative Humidity: 56% ATM Pressure: 100.2kPa The testing was performed by Jessica He on 2010-03-24. Test Mode: Running (Max Power) Below 1 GHz: Corrected Antenna Antenna Turntable Correction Frequency Limit Margin Amplitude Height Polarity Position Factor (MHz) (dBµV/m) (dB) (dBµV/m) (cm) (H/V) (deg) (dB) 45.762500 42.9 135.0 V 3.0 -10.5 70.2 27.30 948.872000 42.3 130.0 H 172.0 -0.5 70.2 27.90 96.664500 36.5 101.0 V 82.0 -18.2 70.2 33.70 35.793250 35.3 179.0 V 165.0 -10.4 70.2 34.90 31.947750 33.2 317.0 H 141.0 -7.5 70.2 37.00 254.312500 31.2 100.0 V 0.0 -14.3 70.2 39.00 Report #: RSZ10031551 Page 18 of 19 FCC Part 18 Test Report

Foshan Shunde Midea Microwave and Electrical Appliances Manufacturing Co., Ltd. FCC ID: VG8XM134AYY Above 1 GHz: S.A. Turntable Test Antenna Cable Pre- Cord. FCC Part 18 Frequency Detector Reading Direction Loss Amp. Amp. MHz (PK/QP/AV) Height Polar Factor Limit Margin (dBµV/m) (Degree) (dB) (dB) (dBμV/m) (m) (H/V) (dB) (dBµV/m) (dB) 9917.0 39.35 AV 54 1.10 H 41.50 6.22 25.48 61.59 70.2 8.61 4934.3 47.14 AV 0 1.34 H 36.60 4.37 26.58 61.53 70.2 8.67 4934.3 48.02 AV 360 1.06 V 35.40 4.37 26.58 61.21 70.2 8.99 9917.0 37.84 AV 66 1.06 V 40.40 6.22 25.48 58.98 70.2 11.22 8390.8 38.58 AV 307 1.31 H 40.40 5.61 27.66 56.93 70.2 13.27 7358.3 37.88 AV 202 1.10 V 38.10 5.20 27.49 53.69 70.2 16.51 8390.8 35.68 AV 63 1.08 V 39.30 5.61 27.66 52.93 70.2 17.27 7403.2 35.37 AV 18 1.11 H 39.40 5.20 27.49 52.48 70.2 17.72 ***** END OF REPORT ***** Report #: RSZ10031551 Page 19 of 19 FCC Part 18 Test Report


Document Created: 2010-06-02 16:02:43
Document Modified: 2010-06-02 16:02:43
© 2024 FCC.report
This site is not affiliated with or endorsed by the FCC