SAR Plots hotspot

FCC ID: V65C5170

RF Exposure Info

Download: PDF
FCCID_1701039

Applicant:Kyocera FCC ID: OVF-C5170 IC#:3572A- C5170 Report #: CT- C5170-9B3-0312-R0 EXHIBIT 9 APPENDIX B3: SAR DISTRIBUTION PLOTS (HOTSPOT) PCS © 2012 Comptest Services LLC Page 1 of 17 SAR Plots Head This report shall not be reproduced except in full, without the written consent of CompTest Services LLC.

Applicant:Kyocera FCC ID: OVF-C5170 IC#:3572A- C5170 Report #: CT- C5170-9B3-0312-R0 Test Laboratory: Comptest/Kyocera Date: 03/26/2012 FCC C5170 PCS Flat with 1cm Air Space, Front Ch. 600 Communication System: CDMA-1900, Frequency: 1880 MHz, Duty Cycle: 1:1 3 Medium: M1800,Medium parameters used: f = 1880 MHz; σ = 1.54 mho/m; εr = 51.9; ρ = 1000 kg/m Phantom: SAM 12,Phantom section: Flat Section DASY4 Configuration: Probe: ES3DV3 - SN3036, ConvF(4.57, 4.57, 4.57), Calibrated: 5/11/2011 Sensor-Surface: 4mm (Mechanical Surface Detection), Electronics: DAE4 Sn675,Calibrated: 5/5/2011 Measurement SW: DASY4, V4.7 Build 80 Postprocessing SW: SEMCAD, V1.8 Build 186 Temperature: Room T = 21.8 +/- 1 deg C, Liquid T = 22.0 +/- 1 deg C CDMA-1900 Ch600 FLAT - Closed FRONT/Area Scan (61x101x1): Measurement grid: dx=15mm, dy=15mm Maximum value of SAR (interpolated) = 0.688 mW/g CDMA-1900 Ch600 FLAT - Closed FRONT/Zoom Scan (7x7x7)/Cube 0: Measurement grid: dx=5mm, dy=5mm, dz=5mm Reference Value = 11.9 V/m; Power Drift = -0.005 dB Peak SAR (extrapolated) = 0.994 W/kg SAR(1 g) = 0.607 mW/g; SAR(10 g) = 0.361 mW/g Maximum value of SAR (measured) = 0.662 mW/g 0 dB = 0.688mW/g © 2012 Comptest Services LLC Page 2 of 17 SAR Plots Head This report shall not be reproduced except in full, without the written consent of CompTest Services LLC.

Applicant:Kyocera FCC ID: OVF-C5170 IC#:3572A- C5170 Report #: CT- C5170-9B3-0312-R0 Test Laboratory: Comptest/Kyocera Date: 03/26/2012 FCC C5170 PCS Flat with 1cm Air Space, Back Ch. 25 Communication System: CDMA-1900, Frequency: 1851.25 MHz, Duty Cycle: 1:1 Medium: M1800,Medium parameters used (interpolated): f = 1851.25 MHz; σ = 1.54 mho/m; εr = 51.9; ρ = 1000 3 kg/m Phantom: SAM 12,Phantom section: Flat Section DASY4 Configuration: Probe: ES3DV3 - SN3036, ConvF(4.57, 4.57, 4.57), Calibrated: 5/11/2011 Sensor-Surface: 4mm (Mechanical Surface Detection), Electronics: DAE4 Sn675,Calibrated: 5/5/2011 Measurement SW: DASY4, V4.7 Build 80 Postprocessing SW: SEMCAD, V1.8 Build 186 Temperature: Room T = 21.8 +/- 1 deg C, Liquid T = 22.0 +/- 1 deg C CDMA-1900 Ch25 FLAT - Closed BACK/Area Scan (61x101x1): Measurement grid: dx=15mm, dy=15mm Maximum value of SAR (interpolated) = 1.04 mW/g CDMA-1900 Ch25 FLAT - Closed BACK/Zoom Scan (7x7x7)/Cube 0: Measurement grid: dx=5mm, dy=5mm, dz=5mm Reference Value = 10.8 V/m; Power Drift = 0.025 dB Peak SAR (extrapolated) = 1.58 W/kg SAR(1 g) = 0.955 mW/g; SAR(10 g) = 0.564 mW/g Maximum value of SAR (measured) = 1.03 mW/g 0 dB = 1.04mW/g © 2012 Comptest Services LLC Page 3 of 17 SAR Plots Head This report shall not be reproduced except in full, without the written consent of CompTest Services LLC.

Applicant:Kyocera FCC ID: OVF-C5170 IC#:3572A- C5170 Report #: CT- C5170-9B3-0312-R0 Test Laboratory: Comptest/Kyocera Date: 03/26/2012 FCC C5170 PCS Flat with 1cm Air Space, Back Ch. 600 Communication System: CDMA-1900, Frequency: 1880 MHz, Duty Cycle: 1:1 3 Medium: M1800,Medium parameters used: f = 1880 MHz; σ = 1.54 mho/m; εr = 51.9; ρ = 1000 kg/m Phantom: SAM 12,Phantom section: Flat Section DASY4 Configuration: Probe: ES3DV3 - SN3036, ConvF(4.57, 4.57, 4.57), Calibrated: 5/11/2011 Sensor-Surface: 4mm (Mechanical Surface Detection), Electronics: DAE4 Sn675,Calibrated: 5/5/2011 Measurement SW: DASY4, V4.7 Build 80 Postprocessing SW: SEMCAD, V1.8 Build 186 Temperature: Room T = 21.8 +/- 1 deg C, Liquid T = 22.0 +/- 1 deg C CDMA-1900 Ch600 FLAT - Closed BACK/Area Scan (61x101x1): Measurement grid: dx=15mm, dy=15mm Maximum value of SAR (interpolated) = 0.999 mW/g CDMA-1900 Ch600 FLAT - Closed BACK/Zoom Scan (7x7x7)/Cube 0: Measurement grid: dx=5mm, dy=5mm, dz=5mm Reference Value = 10.8 V/m; Power Drift = 0.182 dB Peak SAR (extrapolated) = 1.52 W/kg SAR(1 g) = 0.917 mW/g; SAR(10 g) = 0.543 mW/g Maximum value of SAR (measured) = 0.999 mW/g 0 dB = 0.999mW/g © 2012 Comptest Services LLC Page 4 of 17 SAR Plots Head This report shall not be reproduced except in full, without the written consent of CompTest Services LLC.

COMPTEST Services LLC Interpolated SAR(x.y.z.f0) SAR: Z Scan: Value Along Z, X=0, Y=0 rerfmmmrmmmr mm mm mendrnne brmeerme mondrmne on rmne mc 1.2 14 1.0 0.9 0.8 0.7 L+— €o.6 0.5 0.4 0.3 0.2 0.1 0.0

Applicant:Kyocera FCC ID: OVF-C5170 IC#:3572A- C5170 Report #: CT- C5170-9B3-0312-R0 Test Laboratory: Comptest/Kyocera Date: 03/26/2012 FCC C5170 PCS Flat with 1cm Air Space, Back Ch. 1175 Communication System: CDMA-1900, Frequency: 1908.75 MHz, Duty Cycle: 1:1 Medium: M1800,Medium parameters used (interpolated): f = 1908.75 MHz; σ = 1.54 mho/m; εr = 51.9; ρ = 1000 3 kg/m Phantom: SAM 12,Phantom section: Flat Section DASY4 Configuration: Probe: ES3DV3 - SN3036, ConvF(4.57, 4.57, 4.57), Calibrated: 5/11/2011 Sensor-Surface: 4mm (Mechanical Surface Detection), Electronics: DAE4 Sn675,Calibrated: 5/5/2011 Measurement SW: DASY4, V4.7 Build 80 Postprocessing SW: SEMCAD, V1.8 Build 186 Temperature: Room T = 21.8 +/- 1 deg C, Liquid T = 22.0 +/- 1 deg C CDMA-1900 Ch1175 FLAT - Closed BACK/Area Scan (61x101x1): Measurement grid: dx=15mm, dy=15mm Maximum value of SAR (interpolated) = 1.16 mW/g CDMA-1900 Ch1175 FLAT - Closed BACK/Zoom Scan (7x7x7)/Cube 0: Measurement grid: dx=5mm, dy=5mm, dz=5mm Reference Value = 13.2 V/m; Power Drift = -0.134 dB Peak SAR (extrapolated) = 1.79 W/kg SAR(1 g) = 1.06 mW/g; SAR(10 g) = 0.638 mW/g Maximum value of SAR (measured) = 1.16 mW/g 0 dB = 1.16mW/g © 2012 Comptest Services LLC Page 6 of 17 SAR Plots Head This report shall not be reproduced except in full, without the written consent of CompTest Services LLC.

Applicant:Kyocera FCC ID: OVF-C5170 IC#:3572A- C5170 Report #: CT- C5170-9B3-0312-R0 Test Laboratory: Comptest/Kyocera Date: 03/26/2012 FCC C5170 PCS Flat with 1cm Air Space, Left Ch. 600 Communication System: CDMA-1900, Frequency: 1880 MHz, Duty Cycle: 1:1 3 Medium: M1800,Medium parameters used: f = 1880 MHz; σ = 1.54 mho/m; εr = 51.9; ρ = 1000 kg/m Phantom: SAM 12,Phantom section: Flat Section DASY4 Configuration: Probe: ES3DV3 - SN3036, ConvF(4.57, 4.57, 4.57), Calibrated: 5/11/2011 Sensor-Surface: 4mm (Mechanical Surface Detection), Electronics: DAE4 Sn675,Calibrated: 5/5/2011 Measurement SW: DASY4, V4.7 Build 80 Postprocessing SW: SEMCAD, V1.8 Build 186 Temperature: Room T = 21.8 +/- 1 deg C, Liquid T = 22.0 +/- 1 deg C CDMA-1900 Ch600 FLAT - Left /Area Scan (91x51x1): Measurement grid: dx=15mm, dy=15mm Maximum value of SAR (interpolated) = 0.252 mW/g CDMA-1900 Ch600 FLAT - Left /Zoom Scan (7x7x7)/Cube 0: Measurement grid: dx=5mm, dy=5mm, dz=5mm Reference Value = 12.8 V/m; Power Drift = 0.068 dB Peak SAR (extrapolated) = 0.374 W/kg SAR(1 g) = 0.235 mW/g; SAR(10 g) = 0.144 mW/g Maximum value of SAR (measured) = 0.256 mW/g 0 dB = 0.252mW/g © 2012 Comptest Services LLC Page 7 of 17 SAR Plots Head This report shall not be reproduced except in full, without the written consent of CompTest Services LLC.

COMPTEST n Services LLC Interpolated SAR(x.y.z.f0) SAR: Z Scan: Value Along Z, X=0, Y=0 0.25 — % 0.20 0.15 mW 0.10 \ 0.05 \ 0.00 [~toeemotleby cgcctlorca.

Applicant:Kyocera FCC ID: OVF-C5170 IC#:3572A- C5170 Report #: CT- C5170-9B3-0312-R0 Test Laboratory: Comptest/Kyocera Date: 03/26/2012 FCC C5170 PCS Flat with 1cm Air Space, Right Ch. 600 Communication System: CDMA-1900, Frequency: 1880 MHz, Duty Cycle: 1:1 3 Medium: M1800,Medium parameters used: f = 1880 MHz; σ = 1.54 mho/m; εr = 51.9; ρ = 1000 kg/m Phantom: SAM 12,Phantom section: Flat Section DASY4 Configuration: Probe: ES3DV3 - SN3036, ConvF(4.57, 4.57, 4.57), Calibrated: 5/11/2011 Sensor-Surface: 4mm (Mechanical Surface Detection), Electronics: DAE4 Sn675,Calibrated: 5/5/2011 Measurement SW: DASY4, V4.7 Build 80 Postprocessing SW: SEMCAD, V1.8 Build 186 Temperature: Room T = 21.8 +/- 1 deg C, Liquid T = 22.0 +/- 1 deg C CDMA-1900 Ch600 FLAT - Right /Area Scan (101x51x1): Measurement grid: dx=15mm, dy=15mm Maximum value of SAR (interpolated) = 0.248 mW/g CDMA-1900 Ch600 FLAT - Right /Zoom Scan (7x7x7)/Cube 0: Measurement grid: dx=5mm, dy=5mm, dz=5mm Reference Value = 10.6 V/m; Power Drift = -0.053 dB Peak SAR (extrapolated) = 0.350 W/kg SAR(1 g) = 0.216 mW/g; SAR(10 g) = 0.129 mW/g Maximum value of SAR (measured) = 0.235 mW/g 0 dB = 0.248mW/g © 2012 Comptest Services LLC Page 9 of 17 SAR Plots Head This report shall not be reproduced except in full, without the written consent of CompTest Services LLC.

Applicant:Kyocera FCC ID: OVF-C5170 IC#:3572A- C5170 Report #: CT- C5170-9B3-0312-R0 Test Laboratory: Comptest/Kyocera Date: 03/26/2012 FCC C5170 PCS Flat with 1cm Air Space, Bottom Ch. 600 Communication System: CDMA-1900, Frequency: 1880 MHz, Duty Cycle: 1:1 3 Medium: M1800,Medium parameters used: f = 1880 MHz; σ = 1.54 mho/m; εr = 51.9; ρ = 1000 kg/m Phantom: SAM 12,Phantom section: Flat Section DASY4 Configuration: Probe: ES3DV3 - SN3036, ConvF(4.57, 4.57, 4.57), Calibrated: 5/11/2011 Sensor-Surface: 4mm (Mechanical Surface Detection), Electronics: DAE4 Sn675,Calibrated: 5/5/2011 Measurement SW: DASY4, V4.7 Build 80 Postprocessing SW: SEMCAD, V1.8 Build 186 Temperature: Room T = 21.8 +/- 1 deg C, Liquid T = 22.0 +/- 1 deg C CDMA-1900 Ch600 FLAT - Bottom /Area Scan (61x101x1): Measurement grid: dx=15mm, dy=15mm Maximum value of SAR (interpolated) = 0.413 mW/g CDMA-1900 Ch600 FLAT - Bottom /Zoom Scan (7x7x7)/Cube 0: Measurement grid: dx=5mm, dy=5mm, dz=5mm Reference Value = 16.7 V/m; Power Drift = -0.091 dB Peak SAR (extrapolated) = 0.592 W/kg SAR(1 g) = 0.372 mW/g; SAR(10 g) = 0.220 mW/g Maximum value of SAR (measured) = 0.407 mW/g 0 dB = 0.413mW/g © 2012 Comptest Services LLC Page 10 of 17 SAR Plots Head This report shall not be reproduced except in full, without the written consent of CompTest Services LLC.

Applicant:Kyocera FCC ID: OVF-C5170 IC#:3572A- C5170 Report #: CT- C5170-9B3-0312-R0 WIFI © 2012 Comptest Services LLC Page 11 of 17 SAR Plots Head This report shall not be reproduced except in full, without the written consent of CompTest Services LLC.

Applicant:Kyocera FCC ID: OVF-C5170 IC#:3572A- C5170 Report #: CT- C5170-9B3-0312-R0 Test Laboratory: Comptest/Kyocera Date: 03/22/2012 FCC C5170 WIFI Flat with 1cm Air Space, Front Ch. 11 Communication System: WLAN-2450, Frequency: 2462 MHz, Duty Cycle: 1:1 3 Medium: M2450,Medium parameters used: f = 2500 MHz; σ = 1.98 mho/m; εr = 50.4; ρ = 1000 kg/m Phantom: SAM 12,Phantom section: Flat Section DASY4 Configuration: Probe: ES3DV3 - SN3078, ConvF(4.16, 4.16, 4.16), Calibrated: 9/19/2011 Sensor-Surface: 4mm (Mechanical Surface Detection), Electronics: DAE4 Sn530,Calibrated: 5/5/2011 Measurement SW: DASY4, V4.7 Build 80 Postprocessing SW: SEMCAD, V1.8 Build 186 Temperature: Room T = 21.8 +/- 1 deg C, Liquid T = 22.0 +/- 1 deg C WLAN Ch11 FLAT - Face Up/Area Scan (61x91x1): Measurement grid: dx=15mm, dy=15mm Maximum value of SAR (interpolated) = 0.300 mW/g WLAN Ch11 FLAT - Face Up/Zoom Scan (7x7x7)/Cube 0: Measurement grid: dx=5mm, dy=5mm, dz=5mm Reference Value = 0.761 V/m; Power Drift = -0.121 dB Peak SAR (extrapolated) = 0.470 W/kg SAR(1 g) = 0.087 mW/g; SAR(10 g) = 0.022 mW/g Maximum value of SAR (measured) = 0.246 mW/g 0 dB = 0.300mW/g © 2012 Comptest Services LLC Page 12 of 17 SAR Plots Head This report shall not be reproduced except in full, without the written consent of CompTest Services LLC.

Applicant:Kyocera FCC ID: OVF-C5170 IC#:3572A- C5170 Report #: CT- C5170-9B3-0312-R0 Test Laboratory: Comptest/Kyocera Date: 03/22/2012 FCC C5170 WIFI Flat with 1cm Air Space, Back Ch. 11 Communication System: WLAN-2450, Frequency: 2462 MHz, Duty Cycle: 1:1 3 Medium: M2450,Medium parameters used: f = 2500 MHz; σ = 1.98 mho/m; εr = 50.4; ρ = 1000 kg/m Phantom: SAM 12,Phantom section: Flat Section DASY4 Configuration: Probe: ES3DV3 - SN3078, ConvF(4.16, 4.16, 4.16), Calibrated: 9/19/2011 Sensor-Surface: 4mm (Mechanical Surface Detection), Electronics: DAE4 Sn530,Calibrated: 5/5/2011 Measurement SW: DASY4, V4.7 Build 80 Postprocessing SW: SEMCAD, V1.8 Build 186 Temperature: Room T = 21.8 +/- 1 deg C, Liquid T = 22.0 +/- 1 deg C WLAN Ch11 FLAT - Face Down/Area Scan (61x91x1): Measurement grid: dx=15mm, dy=15mm Maximum value of SAR (interpolated) = 0.086 mW/g WLAN Ch11 FLAT - Face Down/Zoom Scan (7x7x7)/Cube 0: Measurement grid: dx=5mm, dy=5mm, dz=5mm Reference Value = 2.49 V/m; Power Drift = 0.167 dB Peak SAR (extrapolated) = 0.223 W/kg SAR(1 g) = 0.062 mW/g; SAR(10 g) = 0.026 mW/g Maximum value of SAR (measured) = 0.212 mW/g WLAN Ch11 FLAT - Face Down/Zoom Scan (7x7x7)/Cube 1: Measurement grid: dx=5mm, dy=5mm, dz=5mm Reference Value = 2.49 V/m; Power Drift = 0.167 dB Peak SAR (extrapolated) = 0.275 W/kg SAR(1 g) = 0.105 mW/g; SAR(10 g) = 0.052 mW/g Maximum value of SAR (measured) = 0.141 mW/g 0 dB = 0.141mW/g © 2012 Comptest Services LLC Page 13 of 17 SAR Plots Head This report shall not be reproduced except in full, without the written consent of CompTest Services LLC.

COMPTEST n Services LLC Interpolated SAR(x.y.z.f0) SAR: Z Scan: Value Along Z, X=0, Y=0 0.30—— X 0.25—— \ 0.20—— |__— mm a 30. o in mW / 0.10 / 0.05—— \ asl ___]nemmboanpoh. 7\ 11 _ 1__ _ 1_(_4 1__ _ 11 _4 1_1_4 11 _ 1_1_4 0.00 0.02 0.04 0.06 0.08 0.10 0.12 0.14 0.16 m

Applicant:Kyocera FCC ID: OVF-C5170 IC#:3572A- C5170 Report #: CT- C5170-9B3-0312-R0 Test Laboratory: Comptest/Kyocera Date: 03/22/2012 FCC C5170 WIFI Flat with 1cm Air Space, Left Ch. 11 Communication System: WLAN-2450, Frequency: 2462 MHz, Duty Cycle: 1:1 3 Medium: M2450,Medium parameters used: f = 2500 MHz; σ = 1.98 mho/m; εr = 50.4; ρ = 1000 kg/m Phantom: SAM 12,Phantom section: Flat Section DASY4 Configuration: Probe: ES3DV3 - SN3078, ConvF(4.16, 4.16, 4.16), Calibrated: 9/19/2011 Sensor-Surface: 4mm (Mechanical Surface Detection), Electronics: DAE4 Sn530,Calibrated: 5/5/2011 Measurement SW: DASY4, V4.7 Build 80 Postprocessing SW: SEMCAD, V1.8 Build 186 Temperature: Room T = 21.8 +/- 1 deg C, Liquid T = 22.0 +/- 1 deg C WLAN Ch11 FLAT -Left/Area Scan (61x91x1): Measurement grid: dx=15mm, dy=15mm Maximum value of SAR (interpolated) = 0.088 mW/g WLAN Ch11 FLAT -Left/Zoom Scan (7x7x7)/Cube 0: Measurement grid: dx=5mm, dy=5mm, dz=5mm Reference Value = 1.22 V/m; Power Drift = 0.017 dB Peak SAR (extrapolated) = 0.718 W/kg SAR(1 g) = 0.017 mW/g; SAR(10 g) = 0.00586 mW/g Maximum value of SAR (measured) = 0.219 mW/g WLAN Ch11 FLAT -Left/Zoom Scan (7x7x7)/Cube 1: Measurement grid: dx=5mm, dy=5mm, dz=5mm Reference Value = 1.22 V/m; Power Drift = 0.017 dB Peak SAR (extrapolated) = 0.041 W/kg SAR(1 g) = 0.00444 mW/g; SAR(10 g) = 0.000982 mW/g Maximum value of SAR (measured) = 0.027 mW/g 0 dB = 0.088mW/g © 2012 Comptest Services LLC Page 15 of 17 SAR Plots Head This report shall not be reproduced except in full, without the written consent of CompTest Services LLC.

COMPTEST Services LLC Interpolated SAR(x.y.z.f0) SAR: Z Scan: Value Along Z, X=0, Y=0 0.16 0.14 k 0.12 ‘& \ 0.10 E fl% 0.08 |_— mW mm 0.06—— \ 0.04—— 0.02 0.00 F /M‘\\ /\ —0.02 0.00 0.02 0.04 0.06 0.08 0.10 0.12 0.14 0.16

Applicant:Kyocera FCC ID: OVF-C5170 IC#:3572A- C5170 Report #: CT- C5170-9B3-0312-R0 Test Laboratory: Comptest/Kyocera Date: 03/22/2012 FCC C5170 WIFI Flat with 1cm Air Space, Bottom Ch. 11 Communication System: WLAN-2450, Frequency: 2462 MHz, Duty Cycle: 1:1 3 Medium: M2450,Medium parameters used: f = 2500 MHz; σ = 1.98 mho/m; εr = 50.4; ρ = 1000 kg/m Phantom: SAM 12,Phantom section: Flat Section DASY4 Configuration: Probe: ES3DV3 - SN3078, ConvF(4.16, 4.16, 4.16), Calibrated: 9/19/2011 Sensor-Surface: 4mm (Mechanical Surface Detection), Electronics: DAE4 Sn530,Calibrated: 5/5/2011 Measurement SW: DASY4, V4.7 Build 80 Postprocessing SW: SEMCAD, V1.8 Build 186 Temperature: Room T = 21.8 +/- 1 deg C, Liquid T = 22.0 +/- 1 deg C WLAN Ch11 FLAT -Bottom/Area Scan (71x51x1): Measurement grid: dx=15mm, dy=15mm Maximum value of SAR (interpolated) = 0.095 mW/g WLAN Ch11 FLAT -Bottom/Zoom Scan (7x7x7)/Cube 0: Measurement grid: dx=5mm, dy=5mm, dz=5mm Reference Value = 1.20 V/m; Power Drift = 0.123 dB Peak SAR (extrapolated) = 0.481 W/kg SAR(1 g) = 0.101 mW/g; SAR(10 g) = 0.027 mW/g Maximum value of SAR (measured) = 0.273 mW/g WLAN Ch11 FLAT -Bottom/Zoom Scan (7x7x7)/Cube 1: Measurement grid: dx=5mm, dy=5mm, dz=5mm Reference Value = 1.20 V/m; Power Drift = 0.123 dB Peak SAR (extrapolated) = 0.290 W/kg SAR(1 g) = 0.030 mW/g; SAR(10 g) = 0.00917 mW/g Maximum value of SAR (measured) = 0.163 mW/g 0 dB = 0.095mW/g © 2012 Comptest Services LLC Page 17 of 17 SAR Plots Head This report shall not be reproduced except in full, without the written consent of CompTest Services LLC.


Document Created: 2012-04-20 16:08:00
Document Modified: 2012-04-20 16:08:00
© 2024 FCC.report
This site is not affiliated with or endorsed by the FCC