Test report

FCC ID: V5PPX7BW

Test Report

Download: PDF
FCCID_3115043

FCC RF Test Report Report No. : FR642903D FCC RF Test Report APPLICANT : PAX Technology Limited EQUIPMENT : Multi-Lane Payment Terminal BRAND NAME : PAX MODEL NAME : PX7 MARKETING NAME : PX7 FCC ID : V5PPX7BW STANDARD : FCC Part 15 Subpart C §15.225 CLASSIFICATION : (DXX) Low Power Communication Device Transmitter The product was received on Apr. 29, 2016 and testing was completed on May 25, 2016. We, SPORTON INTERNATIONAL (SHENZHEN) INC., would like to declare that the tested sample has been evaluated in accordance with the test procedures and has been in compliance with the applicable technical standards. The test results in this report apply exclusively to the tested model / sample. Without written approval of SPORTON INTERNATIONAL (SHENZHEN) INC., the test report shall not be reproduced except in full. Prepared by: Ken Chen / Manager Approved by: Jones Tsai / Manager SPORTON INTERNATIONAL (SHENZHEN) INC. 1F & 2F, Building A, Morning Business Center, No. 4003 ShiGu Rd., Xili Town, Nanshan District, Shenzhen, Guangdong, P. R. China SPORTON INTERNATIONAL (SHENZHEN) INC. Page Number : 1 of 18 TEL : 86-755-8637-9589 Report Issued Date : Aug. 19, 2016 FAX : 86-755-8637-9595 Report Version : Rev. 01 FCC ID : V5PPX7BW Report Template No.: BU5-FR15CNFC Version 1.0

FCC RF Test Report Report No. : FR642903D Table of Contents SUMMARY OF THE TEST RESULT ...........................................................................................................................4 1. GENERAL INFORMATION......................................................................................................................................5 1.1 Applicant .......................................................................................................................................................................... 5 1.2 Manufacturer..................................................................................................................................................................... 5 1.3 Product Details .................................................................................................................................................................. 5 1.4 Modification of EUT............................................................................................................................................................ 5 1.5 Testing Location ................................................................................................................................................................ 6 1.6 Applicable Standards ......................................................................................................................................................... 6 1.7 Test Modes ....................................................................................................................................................................... 7 1.8 Test Configurations ............................................................................................................................................................ 8 1.9 Table for Supporting Units .................................................................................................................................................. 9 2. CONDUCTED EMISSION TEST ............................................................................................................................10 2.1 Measuring Instruments ..................................................................................................................................................... 10 2.2 Test setup ...................................................................................................................................................................... 10 2.3 Test Result of Conducted Emission Test ............................................................................................................................. 10 2.4 AC Power Line Conducted Emissions Measurement ............................................................................................................ 11 3. CONDUCTED TEST ITEMS ..................................................................................................................................12 3.1 Measuring Instruments ..................................................................................................................................................... 12 3.2 Test Setup ...................................................................................................................................................................... 12 3.3 Test Result of Conducted Test Items .................................................................................................................................. 12 3.4 20dB and 99% OBW Spectrum Bandwidth Measurement...................................................................................................... 13 3.5 Frequency Stability Measurement ...................................................................................................................................... 13 4. RADIATED TEST ITEMS .......................................................................................................................................14 4.1 Measuring Instruments ..................................................................................................................................................... 14 4.2 Test Setup ...................................................................................................................................................................... 14 4.3 Test Result of Radiated Test Items .................................................................................................................................... 14 4.4 Field Strength of Fundamental Emissions and Mask Measurement ........................................................................................ 15 4.5 Radiated Emissions Measurement ..................................................................................................................................... 16 5. LIST OF MEASURING EQUIPMENT ....................................................................................................................18 APPENDIX A. SETUP PHOTOGRAPHS OF EUT APPENDIX B. TEST RESULTS OF CONDUCTED EMISSION TEST APPENDIX C. TEST RESULTS OF CONDUCTED TEST ITEMS C.1.Test Result of 20dB Spectrum Bandwidth C.2 Test Result of Frequency Stability APPENDIX D. TEST RESULTS OF RADIATED TEST ITEMS D.1 Test Result of Field Strength of Fundamental Emissions D.2 Results of Radiated Emissions (9 kHz~30MHz) D.3 Results of Radiated Emissions (30MHz~1GHz) SPORTON INTERNATIONAL (SHENZHEN) INC. Page Number : 2 of 18 TEL : 86-755-8637-9589 Report Issued Date : Aug. 19, 2016 FAX : 86-755-8637-9595 Report Version : Rev. 01 FCC ID : V5PPX7BW Report Template No.: BU5-FR15CNFC Version 1.0

FCC RF Test Report Report No. : FR642903D REVISION HISTORY REPORT NO. VERSION DESCRIPTION ISSUED DATE FR642903D Rev. 01 Initial issue of report Aug. 19, 2016 SPORTON INTERNATIONAL (SHENZHEN) INC. Page Number : 3 of 18 TEL : 86-755-8637-9589 Report Issued Date : Aug. 19, 2016 FAX : 86-755-8637-9595 Report Version : Rev. 01 FCC ID : V5PPX7BW Report Template No.: BU5-FR15CNFC Version 1.0

FCC RF Test Report Report No. : FR642903D SUMMARY OF THE TEST RESULT Applied Standard: 47 CFR FCC Part 15 Subpart C / IC RSS-210 issue 8 Part FCC Rule IC Rule Description of Test Result Under Limit AC Power Line Conducted 8.74 dB at 3.1 15.207 RSS-GEN 8.8 Complies Emissions 0.350MHz Field Strength of 48.28 dB at 3.2 15.225(a)(b)(c) A2.6 Complies Fundamental Emissions 13.560 MHz 3.3 2.1049 - 20dB Spectrum Bandwidth Complies - 99% OBW Spectrum 3.3 - RSS-GEN 6.6 Complies - Bandwidth 2.17 dB at 15.225(d) 3.4 A2.6 Radiated Emissions Complies 749.740 MHz 15.209 for Quasi-Peak 3.5 15.225(e) A2.6 Frequency Stability Complies - 3.6 15.203 - Antenna Requirements Complies - Test Items Uncertainty Remark AC Power Line Conducted Emissions ±2.3dB Confidence levels of 95% Radiated Emissions (30MHz~1000MHz) ±5.0dB Confidence levels of 95% SPORTON INTERNATIONAL (SHENZHEN) INC. Page Number : 4 of 18 TEL : 86-755-8637-9589 Report Issued Date : Aug. 19, 2016 FAX : 86-755-8637-9595 Report Version : Rev. 01 FCC ID : V5PPX7BW Report Template No.: BU5-FR15CNFC Version 1.0

FCC RF Test Report Report No. : FR642903D 1. GENERAL INFORMATION 1.1 Applicant PAX Technology Limited Room 2416, 24/F., Sun Hung Kai Centre, 30 Harbour Road, Wanchai, Hong Kong 1.2 Manufacturer PAX Computer Technology (Shenzhen) Co., Ltd. 4/F, No.3 Building, Software Park, Second Central Science-Tech Road, High-Tech industrial Park, Shenzhen, Guangdong, P.R.C. 1.3 Product Details Items Description Tx/Rx Frequency Range 13.553 ~ 13.567MHz Channel Number 1 20dBW 2.64 KHz 99%OBW 2.26 KHz Antenna Type PCB Antenna Type of Modulation ASK Remark: The above EUT's information was declared by manufacturer. Please refer to the specifications or user's manual for more detailed description. 1.4 Modification of EUT No modifications are made to the EUT during all test items. SPORTON INTERNATIONAL (SHENZHEN) INC. Page Number : 5 of 18 TEL : 86-755-8637-9589 Report Issued Date : Aug. 19, 2016 FAX : 86-755-8637-9595 Report Version : Rev. 01 FCC ID : V5PPX7BW Report Template No.: BU5-FR15CNFC Version 1.0

FCC RF Test Report Report No. : FR642903D 1.5 Testing Location Test Site SPORTON INTERNATIONAL (SHENZHEN) INC. 1F & 2F, Building A, Morning Business Center, No. 4003 ShiGu Rd., Xili Town, Nanshan District, Shenzhen, Guangdong, P. R. China Test Site Location TEL: +86-755-8637-9589 FAX: +86-755-8637-9595 Sporton Site No. Test Site No. TH01-SZ CO01-SZ Test Engineer Ting You Tao Cheng Temperature 24~26℃ 21~23℃ Relative Humidity 50~53% 41~43% Test Site SPORTON INTERNATIONAL (SHENZHEN) INC. No. 3 Building, the third floor of south, Shahe River west, Fengzeyuan Test Site Location warehouse, Nanshan District, Shenzhen, Guangdong, P. R. China TEL: +86-755-3320-2398 Sporton Site No. FCC/IC Registration No. Test Site No. 03CH03-SZ Test Engineer Jack Tian 565805/4086F Temperature 21~23℃ Relative Humidity 48~50% Note: The test site complies with ANSI C63.4 2014 requirement. 1.6 Applicable Standards According to the specifications of the manufacturer, the EUT must comply with the requirements of the following standards:  FCC Part 15 Subpart C §15.225  ANSI C63.10-2013 SPORTON INTERNATIONAL (SHENZHEN) INC. Page Number : 6 of 18 TEL : 86-755-8637-9589 Report Issued Date : Aug. 19, 2016 FAX : 86-755-8637-9595 Report Version : Rev. 01 FCC ID : V5PPX7BW Report Template No.: BU5-FR15CNFC Version 1.0

FCC RF Test Report Report No. : FR642903D 1.7 Test Modes Investigation has been done on all the possible configurations for searching the worst cases. The following table is a list of the test modes shown in this test report. Test Items AC Power Line Conducted Emissions Field Strength of Fundamental Emissions 20dB Spectrum Bandwidth Frequency Stability Radiated Emissions 9kHz~30MHz Radiated Emissions 30MHz~1GHz Note: 1. The EUT was programmed to be in continuously transmitting mode. 2. The ancillary equipment, NFC card, is used to make the EUT (NFC) continuously transmit at 13.56MHz and is placed around 3 cm gap to the EUT. SPORTON INTERNATIONAL (SHENZHEN) INC. Page Number : 7 of 18 TEL : 86-755-8637-9589 Report Issued Date : Aug. 19, 2016 FAX : 86-755-8637-9595 Report Version : Rev. 01 FCC ID : V5PPX7BW Report Template No.: BU5-FR15CNFC Version 1.0

FCC RF Test Report Report No. : FR642903D 1.8 Test Configurations <AC Conducted Emissions> Adapter 120 Vac / 60 Hz RJ45 EUT (Adapter) 120 Vac / 60 Hz EUT(PUSB Cable) RS232 Cable Mobile Phone Notebook NFC Card EUT EUT(Touch Pen) WLAN AP iPod < For Fundamental Emissions and Mask and Radiated Emissions Measurement > SPORTON INTERNATIONAL (SHENZHEN) INC. Page Number : 8 of 18 TEL : 86-755-8637-9589 Report Issued Date : Aug. 19, 2016 FAX : 86-755-8637-9595 Report Version : Rev. 01 FCC ID : V5PPX7BW Report Template No.: BU5-FR15CNFC Version 1.0

FCC RF Test Report Report No. : FR642903D 1.9 Table for Supporting Units Support Unit Manufacturer Model FCC ID NFC Card N/A N/A N/A RJ45 N/A N/A N/A Notebook Lenovo E540 FCC DoC Mobile Phone HTC Incredible NM8PB31200 WLAN AP D-Link DIR-628 KA2DIR628A2 iPod Apple ME949 CH/A N/A RS232 Cable N/A N/A N/A SPORTON INTERNATIONAL (SHENZHEN) INC. Page Number : 9 of 18 TEL : 86-755-8637-9589 Report Issued Date : Aug. 19, 2016 FAX : 86-755-8637-9595 Report Version : Rev. 01 FCC ID : V5PPX7BW Report Template No.: BU5-FR15CNFC Version 1.0

FCC RF Test Report Report No. : FR642903D 2. CONDUCTED EMISSION TEST 2.1 Measuring Instruments See list of measuring instruments of this test report. 2.2 Test setup 2.3 Test Result of Conducted Emission Test Please refer to Appendix B. SPORTON INTERNATIONAL (SHENZHEN) INC. Page Number : 10 of 18 TEL : 86-755-8637-9589 Report Issued Date : Aug. 19, 2016 FAX : 86-755-8637-9595 Report Version : Rev. 01 FCC ID : V5PPX7BW Report Template No.: BU5-FR15CNFC Version 1.0

FCC RF Test Report Report No. : FR642903D 2.4 AC Power Line Conducted Emissions Measurement 2.4.1 Limit For equipment that is designed to be connected to the public utility (AC) power line, the radio frequency voltage that is conducted back onto the AC power line on any frequency or frequencies within the band 150 kHz to 30 MHz shall not exceed the limits in the following table. Frequency of Emission Conducted Limit (dBμV) (MHz) Quasi-Peak Average 0.15-0.5 66 to 56* 56 to 46* 0.5-5 56 46 5-30 60 50 *Decreases with the logarithm of the frequency. 2.4.2 Test Procedures 1. The EUT was placed 0.4 meter from the conducting wall of the shielding room, and it was kept at least 80 centimeters from any other grounded conducting surface. 2. Connect EUT to the power mains through a line impedance stabilization network (LISN). 3. All the support units are connecting to the other LISN. 4. The LISN provides 50 ohm coupling impedance for the measuring instrument. 5. The FCC states that a 50 ohm, 50 microhenry LISN should be used. 6. Both sides of AC line were checked for maximum conducted interference. 7. The frequency range from 150 kHz to 30 MHz was searched. 8. Set the test-receiver system to Peak Detect Function and specified bandwidth (IF Bandwidth = 9kHz) with Maximum Hold Mode. Then measurement is also conducted by Average Detector and Quasi-Peak Detector Function respectively. SPORTON INTERNATIONAL (SHENZHEN) INC. Page Number : 11 of 18 TEL : 86-755-8637-9589 Report Issued Date : Aug. 19, 2016 FAX : 86-755-8637-9595 Report Version : Rev. 01 FCC ID : V5PPX7BW Report Template No.: BU5-FR15CNFC Version 1.0

FCC RF Test Report Report No. : FR642903D 3. CONDUCTED TEST ITEMS 3.1 Measuring Instruments See list of measuring instruments of this test report. 3.2 Test Setup 3.2.1 20dB and 99% OBW Spectrum Bandwidth 3.2.2 Frequency Stability 3.3 Test Result of Conducted Test Items Please refer to Appendix C. SPORTON INTERNATIONAL (SHENZHEN) INC. Page Number : 12 of 18 TEL : 86-755-8637-9589 Report Issued Date : Aug. 19, 2016 FAX : 86-755-8637-9595 Report Version : Rev. 01 FCC ID : V5PPX7BW Report Template No.: BU5-FR15CNFC Version 1.0

FCC RF Test Report Report No. : FR642903D 3.4 20dB and 99% OBW Spectrum Bandwidth Measurement 3.4.1 Limit Intentional radiators must be designed to ensure that the 20dB and 99% emission bandwidth in the specific band 13.553~13.567MHz. 3.4.2 Test Procedures 1. The spectrum analyzer connected via a receive antenna placed near the EUT in peak Max hold mode. 2. The resolution bandwidth of 1 kHz and the video bandwidth of 3 kHz were used. 3. Measured the spectrum width with power higher than 20dB below carrier. 4. Measured the 99% OBW. 3.5 Frequency Stability Measurement 3.5.1 Limit The frequency tolerance of the carrier signal shall be maintained within +/- 0.01% (100ppm) of the operating frequency over a temperature variation of -20 degrees to +50 degrees C at normal supply voltage, and for a variation in the primary supply voltage from 85% to 115% of the rated supply voltage at a temperature of 20 degrees C. For battery operated equipment, the equipment tests shall be performed using a new battery. 3.5.2 Test Procedures 1. The spectrum analyzer connected via a receive antenna placed near the EUT. 2. EUT have transmitted signal and fixed channelize. 3. Set the spectrum analyzer span to view the entire emissions bandwidth. 4. Set RBW = 1 kHz, VBW = 3 kHz with peak detector and maxhold settings. 6 5. The fc is declaring of channel frequency. Then the frequency error formula is (fc-f)/fc × 10 ppm and the limit is less than ±100ppm. 6. Extreme temperature rule is -20°C~50°C. SPORTON INTERNATIONAL (SHENZHEN) INC. Page Number : 13 of 18 TEL : 86-755-8637-9589 Report Issued Date : Aug. 19, 2016 FAX : 86-755-8637-9595 Report Version : Rev. 01 FCC ID : V5PPX7BW Report Template No.: BU5-FR15CNFC Version 1.0

FCC RF Test Report Report No. : FR642903D 4. RADIATED TEST ITEMS 4.1 Measuring Instruments See list of measuring instruments of this test report. 4.2 Test Setup 4.2.1 For radiated emissions below 30MHz 4.2.2 For radiated emissions above 30MHz 4.3 Test Result of Radiated Test Items Please refer to Appendix D. SPORTON INTERNATIONAL (SHENZHEN) INC. Page Number : 14 of 18 TEL : 86-755-8637-9589 Report Issued Date : Aug. 19, 2016 FAX : 86-755-8637-9595 Report Version : Rev. 01 FCC ID : V5PPX7BW Report Template No.: BU5-FR15CNFC Version 1.0

FCC RF Test Report Report No. : FR642903D 4.4 Field Strength of Fundamental Emissions and Mask Measurement 4.4.1 Limit FCC CFR 47 Part 15 section 15.225 Rules and specifications IC RSS-210 A2.6 Description Compliance with the spectrum mask is tested with RBW set to 9kHz. Field Strength Field Strength Field Strength Field Strength Freq. of Emission (MHz) (μV/m) at 30m (dBμV/m) at 30m (dBμV/m) at 10m (dBμV/m) at 3m 1.705~13.110 30 29.5 48.58 69.5 13.110~13.410 106 40.5 59.58 80.5 13.410~13.553 334 50.5 69.58 90.5 13.553~13.567 15848 84.0 103.08 124.0 13.567~13.710 334 50.5 69.58 90.5 13.710~14.010 106 40.5 59.58 80.5 14.010~30.000 30 29.5 48.58 69.5 4.4.2 Test Procedures 1. Configure the EUT according to ANSI C63.10. The EUT was placed on the top of the turntable 0.8 meter above ground. The phase center of the loop receiving antenna mounted antenna tower was placed 3 meters far away from the turntable. 2. Power on the EUT and all the supporting units. The turntable was rotated by 360 degrees to determine the position of the highest radiation. 3. The height of the receiving antenna was fixed at one meter above ground to find the maximum emissions field strength. 4. For Fundamental emissions, use the receiver to measure QP reading. 5. When the radiated emissions limits are expressed in terms of the average value of the emissions, and pulsed operation is employed, the measurement field strength shall be determined by averaging over one complete pulse train, including blanking intervals, as long as the pulse train does not exceed 0.1 seconds. As an alternative (provided the transmitter operates for longer than 0.1 seconds) or in cases where the pulse train exceeds 0.1 seconds, the measured field strength shall be determined from the average absolute voltage during a 0.1 second interval during which the field strength is at its maximum value. 6. Compliance with the spectrum mask is tested with RBW set to 9kHz. Note: Emission level (dBμV/m) = 20 log Emission level (μV/m). SPORTON INTERNATIONAL (SHENZHEN) INC. Page Number : 15 of 18 TEL : 86-755-8637-9589 Report Issued Date : Aug. 19, 2016 FAX : 86-755-8637-9595 Report Version : Rev. 01 FCC ID : V5PPX7BW Report Template No.: BU5-FR15CNFC Version 1.0

FCC RF Test Report Report No. : FR642903D 4.5 Radiated Emissions Measurement 4.5.1 Limit The field strength of any emissions which appear outside of 13.110 ~14.010MHz band shall not exceed the general radiated emissions limits. Frequencies Field Strength Measurement Distance (MHz) (μV/m) (meters) 0.009~0.490 2400/F(kHz) 300 0.490~1.705 24000/F(kHz) 30 1.705~30.0 30 30 30~88 100 3 88~216 150 3 216~960 200 3 Above 960 500 3 4.5.2 Measuring Instrument Setting The following table is the setting of receiver. Receiver Parameter Setting Attenuation Auto Frequency Range: 9kHz~150kHz RBW 200Hz for QP Frequency Range: 150kHz~30MHz RBW 9kHz for QP Frequency Range: 30MHz~1000MHz RBW 120kHz for Peak Note: The emission limits shown in the above table are based on measurements employing a CISPR quasi-peak detector except for the frequency bands 9-90 kHz, 110-490 kHz. Radiated emission limits in these two bands are based on measurements employing an average detector. SPORTON INTERNATIONAL (SHENZHEN) INC. Page Number : 16 of 18 TEL : 86-755-8637-9589 Report Issued Date : Aug. 19, 2016 FAX : 86-755-8637-9595 Report Version : Rev. 01 FCC ID : V5PPX7BW Report Template No.: BU5-FR15CNFC Version 1.0

FCC RF Test Report Report No. : FR642903D 4.5.3 Test Procedures 1. Configure the EUT according to ANSI C63.10. The EUT was placed on the top of the turntable 0.8 meter above ground. The phase center of the receiving antenna mounted on the top of a height-variable antenna tower was placed 3 meters far away from the turntable. 2. Power on the EUT and all the supporting units. The turntable was rotated by 360 degrees to determine the position of the highest radiation. 3. The height of the broadband receiving antenna was varied between one meter and four meters above ground to find the maximum emissions field strength of both horizontal and vertical polarization. 4. For each suspected emissions, the antenna tower was scan (from 1 M to 4 M) and then the turntable was rotated (from 0 degree to 360 degrees) to find the maximum reading. 5. Set the test-receiver system to Peak or CISPR quasi-peak Detect Function with specified bandwidth under Maximum Hold Mode. 6. When the radiated emissions limits are expressed in terms of the average value of the emissions, and pulsed operation is employed, the measurement field strength shall be determined by averaging over one complete pulse train, including blanking intervals, as long as the pulse train does not exceed 0.1 seconds. As an alternative (provided the transmitter operates for longer than 0.1 seconds) or in cases where the pulse train exceeds 0.1 seconds, the measured field strength shall be determined from the average absolute voltage during a 0.1 second interval during which the field strength is at its maximum value. 7. In case the emission is lower than 30MHz, loop antenna has to be used for measurement and the recorded data should be QP measured by receiver. Antenna Requirements 4.5.4 Limit Except for special regulations, the Low-power Radio-frequency Devices must not be equipped with any jacket for installing an antenna with extension cable. An intentional radiator shall be designed to ensure that no antenna other than that furnished by the responsible party shall be used with the device. The use of a permanently attached antenna or of an antenna that uses a unique coupling to the intentional radiator shall be considered sufficient to comply with the provisions of this Section. The manufacturer may design the unit so that the user can replace a broken antenna, but the use of a standard antenna jack or electrical connector is prohibited. 4.5.5 Antenna Anti-Replacement Construction An embedded-in antenna design is used. SPORTON INTERNATIONAL (SHENZHEN) INC. Page Number : 17 of 18 TEL : 86-755-8637-9589 Report Issued Date : Aug. 19, 2016 FAX : 86-755-8637-9595 Report Version : Rev. 01 FCC ID : V5PPX7BW Report Template No.: BU5-FR15CNFC Version 1.0

FCC RF Test Report Report No. : FR642903D 5. LIST OF MEASURING EQUIPMENT Calibration Instrument Manufacturer Model No. Serial No. Characteristics Test Date Due Date Remark Date Conducted Spectrum Analyzer R&S FSP30 101400 9kHz~40GHz Jan. 12, 2016 May 19, 2016 Jan. 11, 2017 (TH01-SZ) Ten Billion H201408180 Conducted Thermal Chamber Hongzhangrou LP-150U -40~+150°C Aug. 07, 2015 May 19, 2016 Aug. 06, 2016 3 (TH01-SZ) p 6160200008 Conducted AC Power Source Chroma 61602 100Vac~250Vac Aug. 07, 2015 May 19, 2016 Aug. 06, 2016 91 (TH01-SZ) EXA Spectrum MY5515024 Radiation KEYSIGHT N9010A 10Hz~44GHz; May 07, 2016 May 25, 2016 May 06, 2017 Anaiyzer 6 (03CH03-SZ) Radiation Loop Antenna R&S HFH2-Z2 100354 9kHz~30MHz May 07, 2016 May 25, 2016 May 06, 2017 (03CH03-SZ) Radiation Bilog Antenna TeseQ CBL6112D 35408 30MHz-2GHz May 21, 2016 May 25, 2016 May 20, 2017 (03CH03-SZ) PREAMPLIFIE 0.01Hz Radiation Amplifier BPA-530 102210 Oct. 20, 2015 May 25, 2016 Oct. 19, 2016 R ~3000MHz (03CH03-SZ) 6160100019 Radiation AC Power Source Chroma 61601 N/A NCR May 25, 2016 NCR 85 (03CH03-SZ) Radiation Turn Table EM EM1000 N/A 0~360 degree NCR May 25, 2016 NCR (03CH03-SZ) Radiation Antenna Mast EM EM1000 N/A 1 m~4 m NCR May 25, 2016 NCR (03CH03-SZ) Conduction EMI Receiver R&S ESCI7 100724 9kHz~3GHz; Nov. 23, 2015 May 14, 2016 Nov. 22, 2016 (CO01-SZ) Conduction AC LISN EMCO 3816/2SH 00103892 9kHz~30MHz Jan. 12, 2016 May 14, 2016 Jan. 11, 2017 (CO01-SZ) AC LISN Conduction (for auxiliary MessTec 3816/2SH 00103912 9kHz~30MHz Jan. 12, 2016 May 14, 2016 Jan. 11, 2017 (CO01-SZ) equipment) 6160200008 Conduction AC Power Source Chroma 61602 100Vac~250Vac Aug. 07, 2015 May 14, 2016 Aug. 06, 2016 91 (CO01-SZ) LIT-153 Conduction Pulse Limiter COM-POWER Transient 53139 150kHz~30MHz Oct. 20. 2015 May 14, 2016 Oct. 19. 2016 (CO01-SZ) Limiter NCR: No Calibration Required SPORTON INTERNATIONAL (SHENZHEN) INC. Page Number : 18 of 18 TEL : 86-755-8637-9589 Report Issued Date : Aug. 19, 2016 FAX : 86-755-8637-9595 Report Version : Rev. 01 FCC ID : V5PPX7BW Report Template No.: BU5-FR15CNFC Version 1.0

FCC RF Test Report Report No. : FR642903D Appendix A. Photographs of EUT SPORTON INTERNATIONAL (SHENZHEN) INC. Page Number : A1of A1 TEL : 86-755-8637-9589 Report Issued Date : Aug. 19, 2016 FAX : 86-755-8637-9595 Report Version : Rev. 01 FCC ID : V5PPX7BW Report Template No.: BU5-FR15CNFC Version 1.0

FCC RF Test Report Report No. : FR642903D Appendix B. Test Results of Conducted Emission Test Test Mode : NFC Tx Test Voltage : 120Vac / 60Hz Function Type : WLAN Link + Bluetooth Link + LAN Link + Adapter + Touch Pen + NFC Tx (1) The EUT is with NFC antenna during testing.. Remark: 13.56MHz is the NFC RF fundamental signal. SPORTON INTERNATIONAL (SHENZHEN) INC. Page Number : B1 of B4 TEL : 86-755-8637-9589 Report Issued Date : Aug. 19, 2016 FAX : 86-755-8637-9595 Report Version : Rev. 01 FCC ID : V5PPX7BW Report Template No.: BU5-FR15CNFC Version 1.0

FCC RF Test Report Report No. : FR642903D Test Mode : NFC Tx Test Voltage : 120Vac / 60Hz Function Type : WLAN Link + Bluetooth Link + LAN Link + Adapter + Touch Pen + NFC Tx (1) The EUT is with NFC antenna during testing.. Remark: 13.56MHz is the NFC RF fundamental signal. . SPORTON INTERNATIONAL (SHENZHEN) INC. Page Number : B2 of B4 TEL : 86-755-8637-9589 Report Issued Date : Aug. 19, 2016 FAX : 86-755-8637-9595 Report Version : Rev. 01 FCC ID : V5PPX7BW Report Template No.: BU5-FR15CNFC Version 1.0

FCC RF Test Report Report No. : FR642903D Test Mode : NFC Tx Test Voltage : 120Vac / 60Hz Function Type : WLAN Link + Bluetooth Link + LAN Link + Adapter + Touch Pen + NFC Tx (2) The NFC antenna is replaced by a dummy load during test. SPORTON INTERNATIONAL (SHENZHEN) INC. Page Number : B3 of B4 TEL : 86-755-8637-9589 Report Issued Date : Aug. 19, 2016 FAX : 86-755-8637-9595 Report Version : Rev. 01 FCC ID : V5PPX7BW Report Template No.: BU5-FR15CNFC Version 1.0

FCC RF Test Report Report No. : FR642903D Test Mode : NFC Tx Test Voltage : 120Vac / 60Hz Function Type : WLAN Link + Bluetooth Link + LAN Link + Adapter + Touch Pen + NFC Tx (2) The NFC antenna is replaced by a dummy load during test. SPORTON INTERNATIONAL (SHENZHEN) INC. Page Number : B4 of B4 TEL : 86-755-8637-9589 Report Issued Date : Aug. 19, 2016 FAX : 86-755-8637-9595 Report Version : Rev. 01 FCC ID : V5PPX7BW Report Template No.: BU5-FR15CNFC Version 1.0

FCC RF Test Report Report No. : FR642903D Appendix C. Test Results of Conducted Test Items C.1 Test Result of 20dB Spectrum Bandwidth Test mode NFC Tx Test Frequency (MHz) 13.56 * RBW 1 kHz Marker 1 [T1 ] * RBW 1 kHz Marker 1 [T1 ] * VBW 3 kHz -10.42 dBm * VBW 3 kHz -10.50 dBm Ref 20 dBm * Att 40 dB * SWT 20 ms 13.559980000 MHz Ref 20 dBm * Att 40 dB * SWT 20 ms 13.559980000 MHz 20 ndB [T1] 20.00 dB 20 OBW 2.260000000 kHz BW 2.640000000 kHz Temp 1 [T1 OBW] A 10 Temp 1 [T1 ndB] 10 -25.23 dBm A SGL SGL -30.31 dBm 13.558820000 MHz 1 PK 1 PK MAXH 13.558620000 MHz MAXH Temp 2 [T1 OBW] 0 Temp 2 [T1 ndB] 0 -25.09 dBm -30.29 dBm 13.561080000 MHz 1 13.561260000 MHz 1 -10 -10 -20 -20 T1 T2 T1 T2 -30 -30 3DB 3DB -40 -40 -50 -50 -60 -60 -70 -70 -80 -80 Center 13.56 MHz 1 kHz/ Span 10 kHz Center 13.56 MHz 1 kHz/ Span 10 kHz Date: 19.MAY.2016 19:03:57 Date: 19.MAY.2016 18:03:27 20dB Bandwidth (kHz) 2.64 99% OccupiedBW(kHz) 2.26 fL＞13.553 13.55862 Test Result Frequency range (MHz) fH＜13.567 13.56126 Complies SPORTON INTERNATIONAL (SHENZHEN) INC. Page Number : C1 of C2 TEL : 86-755-8637-9589 Report Issued Date : Aug. 19, 2016 FAX : 86-755-8637-9595 Report Version : Rev. 01 FCC ID : V5PPX7BW Report Template No.: BU5-FR15CNFC Version 1.0

FCC RF Test Report Report No. : FR642903D C.2 Test Result of Frequency Stability Voltage vs. Frequency Stability Temperature vs. Frequency Stability Measurement Measurement Voltage (Vac) Temperature (℃) Frequency (MHz) Frequency (MHz) 120 13.559940 -20 13.560000 102 13.559940 -10 13.560000 138 13.559940 0 13.559970 - - 10 13.559960 - - 20 13.560000 - - 30 13.560000 - - 40 13.559980 - - 50 13.559970 Max.Deviation (MHz) -0.000060 Max.Deviation (MHz) -0.000040 Max.Deviation (ppm) -4.4248 Max.Deviation (ppm) -2.9499 Limit FS < ±100 ppm Limit FS < ±100 ppm Test Result PASS Test Result PASS SPORTON INTERNATIONAL (SHENZHEN) INC. Page Number : C2 of C2 TEL : 86-755-8637-9589 Report Issued Date : Aug. 19, 2016 FAX : 86-755-8637-9595 Report Version : Rev. 01 FCC ID : V5PPX7BW Report Template No.: BU5-FR15CNFC Version 1.0

FCC RF Test Report Report No. : FR642903D Appendix D. Test Results of Radiated Test Items D.1 Test Result of Field Strength of Fundamental Emissions Test Mode : NFC Tx Test Frequency (MHz) 13.56 Note: All NFC’s spurious emissions are below 20dB of limits. SPORTON INTERNATIONAL (SHENZHEN) INC. Page Number : D1 of D3 TEL : 86-755-8637-9589 Report Issued Date : Aug. 19, 2016 FAX : 86-755-8637-9595 Report Version : Rev. 01 FCC ID : V5PPX7BW Report Template No.: BU5-FR15CNFC Version 1.0

FCC RF Test Report Report No. : FR642903D D.2 Results of Radiated Emissions (9 kHz~30MHz) Test Mode : NFC Tx Polarization : Horizontal Frequency Level Over Limit Read Antenna Cable Ant Table Remark Limit Line Level Factor Loss Pos Pos ( MHz ) ( dBμV/m ) ( dB ) ( dBμV/m ) (dBμV) ( dB ) ( dB ) ( cm ) ( deg ) 0.02007 50.78 -70.78 121.56 22.33 28.3 0.15 - - Average 0.06696 52.24 -58.85 111.09 29.19 22.9 0.15 - - Average 0.09996 44.08 -63.53 107.61 21.03 22.9 0.15 - - QP 0.12498 38.52 -67.15 105.67 15.6 22.77 0.15 - - Average 0.3609 43.79 -52.67 96.46 21.56 22.07 0.16 - - Average 4.766 34.78 -35.22 70 12.88 21.64 0.26 - - QP 9.728 33.93 -36.07 70 12.26 21.32 0.35 - - QP 19.51 33.81 -36.19 70 11.8 21.51 0.5 - - QP 27.73 34.24 -35.76 70 11.01 22.63 0.6 - - QP Test Mode : NFC Tx Polarization : Vertical Frequency Level Over Limit Read Antenna Cable Ant Table Remark Limit Line Level Factor Loss Pos Pos ( MHz ) ( dBμV/m ) ( dB ) ( dBμV/m ) (dBμV) ( dB ) ( dB ) ( cm ) ( deg ) 0.02007 51.27 -70.29 121.56 22.82 28.3 0.15 - - Average 0.06024 47.38 -64.63 112.01 24.33 22.9 0.15 - - Average 0.09999 39.11 -68.5 107.61 16.06 22.9 0.15 - - QP 0.12501 34.12 -71.55 105.67 11.2 22.77 0.15 - - Average 0.4719 39.46 -54.67 94.13 17.42 21.87 0.17 - - Average 4.22 35.5 -34.5 70 13.49 21.76 0.25 - - QP 9.832 33.98 -36.02 70 12.31 21.31 0.36 - - QP 18.754 33.68 -36.32 70 11.82 21.37 0.49 - - QP 27.115 34.76 -35.24 70 11.61 22.56 0.59 - - QP Note: 1. 13.56 MHz is fundamental signal which can be ignored. 2. The amplitude of spurious emissions which are attenuated by more than 20dB below the permissible value has no need to be reported. 3. Distance extrapolation factor = 40 log (specific distance / test distance) (dB); 4. Limit line = specific limits (dBμV) + distance extrapolation factor. SPORTON INTERNATIONAL (SHENZHEN) INC. Page Number : D2 of D3 TEL : 86-755-8637-9589 Report Issued Date : Aug. 19, 2016 FAX : 86-755-8637-9595 Report Version : Rev. 01 FCC ID : V5PPX7BW Report Template No.: BU5-FR15CNFC Version 1.0

FCC RF Test Report Report No. : FR642903D D.3 Results of Radiated Emissions (30MHz~1GHz) Test Mode : NFC Tx Polarization : Horizontal Frequency Level Over Limit Read Antenna Cable Preamp Ant Table Remark Limit Line Level Factor Loss Factor Pos Pos ( MHz ) ( dBμV/m ) ( dB ) ( dBμV/m ) (dBμV) ( dB ) ( dB ) ( dB ) ( cm ) ( deg ) 133.79 34.03 -9.47 43.5 47.85 17.93 1.53 33.28 - - Peak 271.53 34.12 -11.88 46 48.01 17.36 1.83 33.08 - - Peak 333.61 37.07 -8.93 46 48.27 19.71 2.04 32.95 - - Peak 450.01 35.43 -10.57 46 41.25 24.5 2.31 32.63 - - Peak 549.92 33.49 -12.51 46 39.22 24.1 2.48 32.31 - - Peak 749.74 43.83 -2.17 46 45.72 27 2.85 31.74 100 346 QP Test Mode : NFC Tx Polarization : Vertical Frequency Level Over Limit Read Antenna Cable Preamp Ant Table Remark Limit Line Level Factor Loss Factor Pos Pos ( MHz ) ( dBμV/m ) ( dB ) ( dBμV/m ) (dBμV) ( dB ) ( dB ) ( dB ) ( cm ) ( deg ) 30 36.64 -3.36 40 42.4 26.6 1 33.36 - - Peak 122.15 36.83 -6.67 43.5 50.6 18.16 1.38 33.31 - - Peak 157.07 32.34 -11.16 43.5 46.76 17.28 1.53 33.23 - - Peak 275.41 31.55 -14.45 46 45.27 17.52 1.83 33.07 - - Peak 649.83 37.04 -8.96 46 41.04 25.3 2.71 32.01 - - Peak 749.74 43.69 -2.31 46 45.58 27 2.85 31.74 100 350 QP Note: 1. The amplitude of spurious emissions which are attenuated by more than 20dB below the permissible value has no need to be reported. 2. Emission level (dBμV/m) = 20 log Emission level (μV/m). 3. Corrected Reading: Antenna Factor + Cable Loss + Read Level - Preamp Factor= Level. SPORTON INTERNATIONAL (SHENZHEN) INC. Page Number : D3 of D3 TEL : 86-755-8637-9589 Report Issued Date : Aug. 19, 2016 FAX : 86-755-8637-9595 Report Version : Rev. 01 FCC ID : V5PPX7BW Report Template No.: BU5-FR15CNFC Version 1.0


Document Created: 2017-12-13 13:48:14
Document Modified: 2017-12-13 13:48:14
© 2024 FCC.report
This site is not affiliated with or endorsed by the FCC