User Manual

FCC ID: V5PE800

Users Manual

Download: PDF
FCCID_3944124

1. Contents Checklist Please check the components after unpacking. If any one of them is missing, or if there is a page missing from the product manual,ect.,please contact the dealer. Name Qty. E800 1 AC Power Adapter 1 AC Power cable 1 Thermal Paper Roll 1 Product Manual 1 2. Product Description

3.Installtion USB port: Connect USB device. Micro USB port: Connect Micro USB device. Serial Port: Connect serial device. SIM card slot: Open the SIM card/SD card cover and insert the SIM card in to the corresponding SIM card slot. Micro SD card slot: Open the SIM card/SD card cover and insert the Micro SD card in to the corresponding Micro SD card slot. WAN port: Open the wire hidden cover at the back of the terminal, insert the cable which is connected to the Internet into the WAN port to provide wired network for the cash register. LAN port: If the WAN port has been connected to the Internet, then the LAN port can provide network connection. Cash drawer interface: Open the wire hidden cover at the back of the terminal, insert the

cash drawer's port into the cash drawer interface on the cash register, so that the cash drawer is connected with the cash register. Audio Jack: Use international standard interface. 4. Instruction Power ON/OFF Power on: Press and hold the Power button (on the side) for three seconds until the main screen displays normally. Power off: Press and hold the Power button (on the side) for three seconds until the shutdown menu appears, tap “Shutdown”, and then shutting...”appears. The terminal will be turned off after a few seconds. Load the print paper: When the printer's Out of Paper indicator lights in yellow, it needs to load the print paper. Open the external printer cover by pulling it outward with fingers from the printer cover opening. Open the built-in printer cover by pressing inward the spring key. Load the paper roll by following the direction as shown in the paper warehouse, and close the printer cover. Then the indicator will light off.The paper is changed successfully. Open the external printer cover by pulling it outward with fingers. Then Magnetic Stripe Card: Place the magnetic stripe face down (keep the magnetic stripe card perpendicular to the main display), swipe card through the magnetic card slot at a constant speed. IC Card: Place the IC chip facedown, insert the IC card into the card slot, and push it to the end. Contactless card: Put the contactless card on the center of the payment modulescreen. 5. Specification Operation System: Android 6.0 CPU: Quad-coreA17,1.8GHZprocessor Memory: 2GB RAM + 16GB Flash Memory Main Display: 15.6inch,resolution:1920*1080, multi-touch capacitive touch screen Guest Display: 8 inch, resolution: 1280*800, multi-touch capacitive touch screen Printer: 3" high-speed thermal printer with auto-cutter, printing speed:150mm/s Audio: Built-in speaker, support headphone output Camera: 5 mega-pixel auto-focusing camera, high-speed code scanning L-Sensor (Ambient Light Sensor): automatically adjust the backlight brightness of the main display

Wireless Communication:. Support LANWIPL Bluctooty 36/3Gptiona) Peripheral Ports: 1 Micro:USB port SUSB ports 3 Network ports(L WAN port 2 LAN poits) Leash caver Asaid prt Laudiojock Cand Sot: 151 cardstot 1Mic»SD cardsiot 1magnetic stipe card/1C cartslot using tin—vane (support MAGRICO Mapidtic Card Reads: Support track 1/273. 1C Card Reader: Canform tothe standard e0507616, rvz000 Liri2, PBoGso Cantactiess Cart Reader: Compatible with 150 14443 TypeAKB 6. Paper Installation 1. When the printe s out of paper, the "0ut of Paper® inclcator wll ight in yolos: Open the external prater covebypullng it out wardvith finges from thprinter cover openingthat the arrons pointto} 3. Open the buill—inand externalprinter coversassh un ithefigure

5. Close the printer covers in tim, The "Out of Paper® indicator wil light off ‘The paper i changed successfully 7. Cautions of Installation and Usage 1) Avoidesposing the termindl in hot. humiddlisty or strong elecromagdtic environment. 2) Do not vilentlyvibrats shake orbeat the peocict 3) D not plus/umplug any unit ofthe procct when itspower on,atherid seit may comage the intemal creuit 4) Do not maintain the termind ifyou are non—profecsiond 5) Edtre insarting the magictstipe/1/contactless cac. pleasecheck whether there is ay forein object nslc or szrmundthe card slot, andy / reportto related persorncl. FCC Regulations: This device complies with Part 25 of the FCC Rutes. Opeation is subject to the fullowing two conditions:(1) This device may not cause harmifuinterference, and (2) ts dovice must accept anyinteferencereceved, ncluding intrferencethat may causendesired operation

This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to tr y to correct the interference by one of the following measures:  Reorient or relocate the receiving antenna.  Increase the separation between the equipment and receiver.  Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.  Consult the dealer or an experienced radio/TV technician for help. FCC Caution:  Any changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate this equipment.  This transmitter must not be co-located or operating in conjunction with any other antenna or transmitter. Radiation Exposure Statement: This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with minimum distance 20cm between the radiator & your body. ISED Notice  This device complies with Industry Canada license-exempt RSS standard(s). Operation is subject to the following two conditions: 1) this device may not cause interference, and 2) this device must accept any interference, including interference that may cause undesired operation of the device.  Le présent appareil est conforme aux CNR d'Industrie Canada applicables aux appareils radio exempts de licence. L'exploitation est autorisée aux deux conditions suivantes: 1) l'appareil ne doit pas produire de brouillage, et 2) l'utilisateur de l'appareil doit accepter tout brouillage radioélectrique subi, même si le brouillage est susceptible d'en compromettre le fonctionnement.  This Class B digital apparatus complies with Canadian ICES-003.  Cet appareil numérique de la classe B est conforme à la norme NMB-003 du Canada.  This device complies with RSS-310 of Industry Canada. Operation is subject to the condition

that this device does not cause harmful interference.  Cet appareil est conforme à la norme RSS-310 d'Industrie Canada. L'opération est soumise à la condition que cet appareil ne provoque aucune interférence nuisible.  This device and its antenna(s) must not be co-located or operating in conjunction with any other antenna or transmitter, except tested built-in radios.  Cet appareil et son antenne ne doivent pas être situés ou fonctionner en conjonction avec une autre antenne ou un autre émetteur, exception faites des radios intégrées qui ont été testées.  The County Code Selection feature is disabled for products marketed in the US/ Canada.  La fonction de sélection de l'indicatif du pays est désactivée pour les produits commercialisés aux États-Unis et au Canada. Radiation Exposure Statement: This equipment complies with IC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with minimum distance 20cm between the radiator & your body. Déclaration d'exposition aux radiations: Cet équipement est conforme aux limites d'exposition aux rayonnements IC établies pour un environnement non contrôlé. Cet équipement doit être installé et utilisé avec un minimum de 20 cm de distance entre la source de rayonnement et votre corps.


Document Created: 2018-07-18 15:20:09
Document Modified: 2018-07-18 15:20:09
© 2024 FCC.report
This site is not affiliated with or endorsed by the FCC