test report

FCC ID: UTWBTSG

Test Report

Download: PDF
FCCID_4420909

Report No.: SET2019-10284 EMC TEST REPORT Report No.: SET2019-10284 Product Name: USB Dongle FCC ID: UTWBTSG Trade name: Janam Model No. : BTSG Applicant: Janam Technologies LLC Address: 100 Crossways Park West Suite 105 Woodbury, NY 11797 Dates of Testing: 07/01/2019 — 07/17/2019 Issued by: CCIC Southern Electronic Product Testing (Shenzhen) Co., Ltd. Building 28/29, East of Shigu Xili Industrial Zone, Nanshan District Lab Location: Shenzhen, Guangdong 518055, China Tel: 86 755 26627338 Fax: 86 755 26627238 This test report consists of 21pages in total. It may be duplicated completely for legal use with the approval of the applicant. It should not be reproduced except in full, without the written approval of our laboratory. The client should not use it to claim product endorsement by CCIC-SET. The test results in the report only apply to the tested sample. The test report shall be invalid without all the signatures of testing engineers, reviewer and approver. Any objections must be raised to CCIC-SET within 15 days since the date when the report is received. It will not be taken into consideration beyond this limit. CCIC-SET/TRF: GJ-EMC-E (2019-05-22) Page 1 of 18

Report No.: SET2019-10284 Test Report Product Name ....................... : USB Dongle Model No. ............................ : BTSG Trade name Janam Applicant ............................... : Janam Technologies LLC Applicant Address................ : 100 Crossways Park West Suite 105 Woodbury, NY 11797 Manufacturer ........................ : Janam Technologies LLC Manufacturer Address ......... : 100 Crossways Park West Suite 105 Woodbury, NY 11797 Test Standards...................... : 47 CFR Part 15 Subpart B: Radio Frequency Devices Test Result ............................ : PASS Tested by ............................. : Yun Lei Fang Test Engineer 2019.07.18 Reviewed by ......................... : Chris You Senior Engineer 2019.07.18 Approved by ......................... : 2019.07.18 Shuangwen Zhang, Manager CCIC-SET/TRF: GJ-EMC-E (2019-05-22) Page 2 of 18

Report No.: SET2019-10284 TABLE OF CONTENTS 1. GENERAL INFORMATION ....................................................................................................4 1.1 EUT Description .........................................................................................................................4 1.2 Test Standards and Results ........................................................................................................5 1.3 Facilities and Accreditations ......................................................................................................6 1.3.1 Facilities ....................................................................................................................................6 1.3.2 Test Environment Conditions ....................................................................................................6 1.3.3 Measurement Uncertainty .........................................................................................................6 2. TEST CONDITIONS SETTING...............................................................................................7 2.1 Test Peripherals ..........................................................................................................................7 2.2 Test Mode ....................................................................................................................................7 2.3 Test Setup and Equipments List ................................................................................................8 2.3.1 Conducted Emission..................................................................................................................8 2.3.2 Radiated Emission .....................................................................................................................8 3. 47 CFR PART 15B REQUIREMENTS .................................................................................. 11 3.1 Conducted Emission ................................................................................................................. 11 3.1.1 Requirement ............................................................................................................................ 11 3.1.2 Test Description ...................................................................................................................... 11 3.1.3 Test Result ............................................................................................................................... 11 3.2 Radiated Emission ....................................................................................................................14 3.2.1 Requirement ............................................................................................................................14 3.2.2 Test Description ......................................................................................................................15 3.2.3 Test Result ...............................................................................................................................15 Change History Issue Date Reason for change 1.0 2019.07.18 First edition CCIC-SET/TRF: GJ-EMC-E (2019-05-22) Page 3 of 18

Report No.: SET2019-10284 1. GENERAL INFORMATION 1.1 EUT Description EUT Name .......................... .: USB Dongle Trade Name…………………: Janam Brand Name…………………: Janam Hardware Version……...… : 103c8-r71-v2 Software Version .................. : SCANNER_V3.9 Power supply………………: Battery Model No.: NBLR7 Capacitance:1000mAh Rated Voltage:3.7V Charge Limit: 4.2V±0.03V Ancillary Equipment………: AC Adapter Model No.: A122-0501500IU I/p: 100-240V～50/60Hz ,0.4A O/p: 5.0V 1.5A Manufacturer : Hunan Zhongxingtai Electronics Technology Co., Ltd. Note1:The EUT is a USB dongle; Note 2:or a more detailed description, please refer to Specification or User’s Manual supplied by the applicant and/or manufacturer. CCIC-SET/TRF: GJ-EMC-E (2019-05-22) Page 4 of 18

Report No.: SET2019-10284 1.2 Test Standards and Results The objective of the report is to perform testing according to 47 CFR Part 15 Subpart B: No. Identity Document Title 1 47 CFR Part 15 Radio Frequency Devices Subpart B Test detailed items/section required by FCC rules and results are as below: No. Section Description Result 1 15.107 Conducted Emission PASS 2 15.109 Radiated Emission PASS NOTE: (1) The EUT has been tested according to 47 CFR Part 15 Subpart B. The test procedure is according to ANSI C63.4:2014. CCIC-SET/TRF: GJ-EMC-E (2019-05-22) Page 5 of 18

Report No.: SET2019-10284 1.3 Facilities and Accreditations 1.3.1 Facilities FCC-Registration No.: CN5031 CCIC Southern Electronic Product Testing (Shenzhen) Co., Ltd. EMC Laboratory has been registered and fully described in a report filed with the FCC (Federal Communications Commission). The acceptance letter from the FCC is maintained in our files. Designation Number: CN5031, valid time is until December 31, 2019. CAB identifier: CN0064 ISED Registration: 11185A-1 CCIC Southern Electronic Product Testing (Shenzhen) Co., Ltd. EMC Laboratory has been registered by Certification and Engineering Bureau of Industry Canada for the performance of radiated measurements with Registration No. 11185A-1 on Aug. 04, 2016, valid time is until Dec. 31, 2019. NVLAP Lab Code: 201008-0 CCIC-SET is a third party testing organization accredited by NVLAP according to ISO/IEC 17025. The accreditation certificate number is 201008-0. 1.3.2 Test Environment Conditions During the measurement, the environmental conditions were within the listed ranges: Temperature (°C): 15°C - 35°C Relative Humidity (%): 25% -75% Atmospheric Pressure (kPa): 86kPa-106kPa 1.3.3 Measurement Uncertainty The uncertainty is calculated using the methods suggested in the "Guide to the Expression of Uncertainty in Measurement" (GUM) published by ISO. Uncertainty of Conducted Emission: Uc = 3.6 dB (k=2) Uncertainty of Radiated Emission: Uc = 4.5 dB (k=2) CCIC-SET/TRF: GJ-EMC-E (2019-05-22) Page 6 of 18

Report No.: SET2019-10284 2. TEST CONDITIONS SETTING 2.1 Test Peripherals The following is a listing of the EUT and peripherals utilized during the performance of EMC test: Support Cable： Description Shield Type Ferrite Core Length PC Power adapter Cable Un- shielding Yes 1.2m 2.2 Test Mode The EUT have the following typical setups during the test: Setup 1: EUT Traffic+ PC CCIC-SET/TRF: GJ-EMC-E (2019-05-22) Page 7 of 18

Report No.: SET2019-10284 2.3 Test Setup and Equipments List 2.3.1 Conducted Emission A. Test Setup: < 40cm > < 80cm > Common Antenna EUT Pulse Limiter < 80cm > LISN Receiver System Simulator The EUT is placed on a 0.8m high insulating table, which stands on the grounded conducting floor, and keeps 0.4m away from the grounded conducting wall. The EUT is connected to the power mains through a LISN which provides 50Ω/50µH of coupling impedance for the measuring instrument. The Common Antenna is used for the call between the EUT and the System Simulator (SS). A Pulse Limiter is used to protect the measuring instrument. The factors of the whole test system are calibrated to correct the reading. B. Equipments List: Calibration Calibration Description Manufacturer Model Serial No. Date Due. Date Test Receiver KEYSIGHT ESR3 A181103297 2018.09.14 2019.09.13 LISN ROHDE&SCHWARZ ENV216 A140701847 2018.12.10 2019.12.10 Cable MATCHING PAD W7 / 2019.01.02 2020.01.01 2.3.2 Radiated Emission A. Test Setup: 1) For radiated emissions from 30MHz to1GHz CCIC-SET/TRF: GJ-EMC-E (2019-05-22) Page 8 of 18

Report No.: SET2019-10284 2) For radiated emissions above 1GHz B. Test Procedure The test is performed in a 3m Semi-Anechoic Chamber; the antenna factor, cable loss and so on of the site (factors) is calculated to correct the reading. The EUT is placed on a 0.8m high insulating Turn Table, and keeps 3m away from the Test Antenna, which is mounted on a CCIC-SET/TRF: GJ-EMC-E (2019-05-22) Page 9 of 18

Report No.: SET2019-10284 variable-height antenna master tower. For the test Antenna: 1) In the frequency range above 30MHz, Bi-Log Test Antenna (30MHz to 1GHz) and Horn Test Antenna (above 1GHz) are used. Test Antenna is 3m away from the EUT. Test Antenna height is varied from 1m to 4m above the ground to determine the maximum value of the field strength. The emission levels at both horizontal and vertical polarizations should be tested. C. Equipments List: Calibration Calibration Description Manufacturer Model Serial No. Date Due. Date EMI Test Receiver ROHDE&SCHWARZ ESR3 A181103297 2018.09.14 2019.09.13 LISN ROHDE&SCHWARZ ENV216 A140701847 2018.12.10 2019.12.10 L7300*W4500 Shield Room / A181003226 2018.09.06 2021.09.05 *H3100 EMI Test Receiver ROHDE&SCHWARZ ESIB7 A0501375 2018.08.06 2019.08.05 Broadband Ant. 2786 ETC A150402239 2018.09.17 2021.09.16 3M Anechoic SAC-3MAC Albatross A0412375 2016.03.08 2020.03.07 Chamber 9*6*6m EMI Test Receiver ROHDE&SCHWARZ ESIB26 A180502935 2018.11.01 2019.10.31 System Simulator ROHDE&SCHWARZ CMW500 A150802214 2017.08.29 2019.08.28 5M Anechoic SAC-5MAC Albatross A0304210 2016.03.08 2020.03.07 Chamber 12.8x6.8x6.4m EMI Horn Ant. ROHDE&SCHWARZ HF906 A0304225 2019.04.17 2022.04.17 CCIC-SET/TRF: GJ-EMC-E (2019-05-22) Page 10 of 18

Report No.: SET2019-10284 3. 47 CFR PART 15B REQUIREMENTS 3.1 Conducted Emission 3.1.1 Requirement According to FCC section 15.107, the radio frequency voltage that is conducted back onto the AC power line on any frequency within the band 150kHz to 30MHz shall not exceed the limits in the following table, as measured using a 50µH/50Ω line impedance stabilization network (LISN). Conducted Limit (dBµV) Frequency range (MHz) Quasi-peak Average 0.15 - 0.50 66 to 56 56 to 46 0.50 - 5 56 46 5 - 30 60 50 Note: a) The limit subjects to the Class B digital device. b) The lower limit shall apply at the band edges. c) The limit decreases linearly with the logarithm of the frequency in the range 0.15 - 0.50MHz. 3.1.2 Test Description See section 2.3.1 of this report. 3.1.3 Test Result The maximum conducted interference is searched using Peak (PK), Quasi-peak (QP) and Average (AV) detectors; the emission levels more than the AV and QP limits, and that have narrow margins from the AV and QP limits will be re-measured with AV and QP detectors. Tests for both L phase and N phase lines of the power mains connected to the EUT are performed. All test modes are considered, refer to recorded points and plots below. Note: Devices subject to Part 15 must be tested for all available U.S. voltages and frequencies (such as a Nominal 120V AC,50/60Hz) for which the device is capable of operation. A device rated for 50/60 Hz operation need not be tested at both frequencies provided the radiated and line conducted emissions are the same at both frequencies. CCIC-SET/TRF: GJ-EMC-E (2019-05-22) Page 11 of 18

Report No.: SET2019-10284 Test voltage and frequency (120V AC,60Hz) A. Mains terminal disturbance voltage, L phase Level in dBμ 100 90 1.653000 MHz 2.364000 MHz 3.025500 MHz 80 35.481 dBμ 33.998 dBμ 33.823 dBμ 70 FCC Part 15 Class B Voltage on Mains QP 60 FCC Part 15 Class B Voltage on Mains AV 50 40 30 20 10 0 3.804000 MHz 7.161000 MHz 16.395000 MHz 33.359 dBμ 39.467 dBμ 48.677 dBμ -10 150k 300 400 500 800 1M 2M 3M 4M 5M 6 8 10M 20M 30M Frequency in Hz (Plot A: L Phase) Conducted Disturbance at Mains Terminals L Test Data QP AV Frequen Measurem Frequen Measurem Limits Margin Limits Margin cy ent Value cy ent Value (dBV) (dB) (dBV) (dB) (MHz) (dBV) (MHz) (dBV) 1.6530 56.00 28.12 27.88 1.6530 46.00 17.35 28.65 2.3640 56.00 28.00 28.00 2.3640 46.00 15.22 30.78 3.0255 56.00 27.55 28.45 3.0255 46.00 14.58 31.42 3.8040 56.00 26.87 29.13 3.8040 46.00 13.72 32.28 7.1610 60.00 31.89 28.11 7.1610 50.00 18.15 31.85 16.3950 60.00 42.55 17.45 16.3950 50.00 28.58 21.42 CCIC-SET/TRF: GJ-EMC-E (2019-05-22) Page 12 of 18

Report No.: SET2019-10284 B. Mains terminal disturbance voltage, N phase Level in dBμ 100 90 1.500000 MHz 1.900500 MHz 2.548500 MHz 80 36.353 dBμ 35.789 dBμ 35.629 dBμ 70 FCC Part 15 Class B Voltage on Mains QP 60 FCC Part 15 Class B Voltage on Mains AV 50 40 30 20 10 0 3.030000 MHz 4.047000 MHz 16.143000 MHz 36.918 dBμ 34.781 dBμ 52.307 dBμ -10 150k 300 400 500 800 1M 2M 3M 4M 5M 6 8 10M 20M 30M Frequency in Hz (Plot B: N Phase) Conducted Disturbance at Mains Terminals N Test Data QP AV Frequen Measureme Measureme Limits Margin Frequency Limits Margin cy nt Value nt Value (dBV) (dB) (MHz) (dBV) (dB) (MHz) (dBV) (dBV) 1.5000 56.00 28.59 27.41 1.4055 46.00 19.01 26.99 1.9005 56.00 28.23 27.77 1.8330 46.00 19.42 26.58 2.5485 56.00 28.39 27.61 2.5305 46.00 19.30 26.70 3.0300 56.00 29.87 26.13 3.1245 46.00 19.36 26.64 4.0470 56.00 25.08 30.92 7.5705 46.00 16.45 29.55 16.1430 60.00 42.72 17.28 16.2060 50.00 30.23 19.77 CCIC-SET/TRF: GJ-EMC-E (2019-05-22) Page 13 of 18

Report No.: SET2019-10284 3.2 Radiated Emission 3.2.1 Requirement According to FCC section 15.109, the field strength of radiated emissions from unintentional radiators at a distance of 3 meters shall not exceed the following values: Frequency Field Strength Field Strength Limitation at 3m Measurement Dist range (MHz) µV/m Dist (uV/m) (dBuV/m) 0.009 - 0.490 2400/F(kHz) 300m 10000* 2400/F(kHz) 20log 2400/F(kHz) + 80 0.490 - 1.705 2400/F(kHz) 30m 100* 2400/F(kHz) 20log 2400/F(kHz) + 40 1.705 - 30.00 30 30m 100*30 20log 30 + 40 30.0 - 88.0 100 3m 100 20log 100 88.0 - 216.0 150 3m 150 20log 150 216.0 - 960.0 200 3m 200 20log 200 Above 960.0 500 3m 500 20log 500 a) As shown in FCC section 15.35(b), for frequencies above 1000MHz, the field strength limits are based on average detector. When average radiated emission measurements are specified in this part, including emission measurements below 1000MHz, there also is a limit on the radio frequency emissions, as measured using instrumentation with a peak detector function, corresponding to 20dB above the maximum permitted average limit for the frequency being investigated unless a different peak emission limit is otherwise specified in the rules. b) Test Antenna is 3m away from the EUT. Test Antenna height is varied from 1m to 4m above the ground to determine the maximum value of the field strength. c) For below 1G :QP detector RBW 120kHz ,VBW 300kHz. d) For Above 1G: PK detector RBW 1MHz,VBW 3MHz for PK value ;AV detector RBW 1MHz, VBW 10Hz for AV value. Note: 1) The tighter limit shall apply at the boundary between two frequency range. 2) Limitation expressed in dBuV/m is calculated by 20log Emission Level(uV/m). 3) If measurement is made at 3m distance, then F.S Limitation at 3m distance is adjusted by using the formula of Ld1 = Ld2 * (d2/d1)2. Example: F.S Limit at 30m distance is 30uV/m, then F.S Limitation at 3m distance is adjusted as Ld1 = L1 = 30uV/m * (10)2 = 100 * 30uV/m. CCIC-SET/TRF: GJ-EMC-E (2019-05-22) Page 14 of 18

Report No.: SET2019-10284 3.2.2 Test Description See section 2.3.2 of this report. 3.2.3 Test Result The maximum radiated emission is searched using PK, QP and AV detectors; the emission levels more than the limits, and that have narrow margins from the limits will be re-measured with AV and QP detectors. Both the vertical and the horizontal polarizations of the Test Antenna are considered to perform the tests. All test modes are considered, refer to recorded points and plots below. The amplitude of spurious emissions which are attenuated more than 20 dB below the permissible value need not be reported. Note: All radiated emission tests were performed in X, Y, Z axis direction, and only the worst axis test condition was recorded in this test report. CCIC-SET/TRF: GJ-EMC-E (2019-05-22) Page 15 of 18

Report No.: SET2019-10284 A.Radiation disturbances, antenna polarization: Horizontal Marker: 30 MHz 32.23 dBµV/m Level [dBµV/m] 80 70 60 50 40 30 20 10 0 30M 50M 70M 100M 200M 300M 500M 700M 1G Frequency [Hz] MES 19-07298 H LIM FCC Cl.B F QP/AV FCC ClassB, field strength (Plot C: Test Antenna Vertical 30M - 1G) Antenna Frequency QuasiPeak Bandwidth Limit Margin height Antenna Verdict (MHz) (dBμV/m) (kHz) (dBμV/m) (dB) (cm) 30.26 30.12 120.000 208.0 40.00 9.88 Horizontal Pass 37.52 28.11 120.000 129.0 40.00 11.89 Horizontal Pass 75.63 20.02 120.000 147.0 40.00 19.98 Horizontal Pass 106.87 23.05 120.000 169.0 43.50 20.45 Horizontal Pass 148.92 22.43 120.000 207.0 43.50 21.07 Horizontal Pass 352.00 26.11 120.000 207.0 46.00 19.89 Horizontal Pass CCIC-SET/TRF: GJ-EMC-E (2019-05-22) Page 16 of 18

Report No.: SET2019-10284 B.Radiation disturbances, antenna polarization: Vertical Marker: 47.49499 MHz 31.58 dBµV/m Level [dBµV/m] 80 70 60 50 40 30 20 10 0 30M 50M 70M 100M 200M 300M 500M 700M 1G Frequency [Hz] MES 19-07298 V LIM FCC Cl.B F QP/AV FCC ClassB, field strength (Plot D: Test Antenna Horizontal 30M - 1G) Antenna Frequency QuasiPeak Bandwidth Limit Margin height Antenna Verdict (MHz) (dBμV/m) (kHz) (dBμV/m) (dB) (cm) 30.00 29.49 120.000 223.0 40.00 10.51 Vertical Pass 47.45 31.11 120.000 209.0 40.00 8.89 Vertical Pass 53.11 20.14 120.000 126.0 43.50 23.36 Vertical Pass 146.39 22.55 120.000 268.0 43.50 20.95 Vertical Pass 197.13 21.55 120.000 214.0 43.50 21.95 Vertical Pass 256.32 23.48 120.000 364.0 46.00 22.52 Vertical Pass Test Result: PASS CCIC-SET/TRF: GJ-EMC-E (2019-05-22) Page 17 of 18

Report No.: SET2019-10284 A.Radiation disturbances, antenna polarization: Horizontal (Plot M: Test Antenna Horizontal 1G – 18G) B.Radiation disturbances, antenna polarization: Vertical (Plot N: Test Antenna Vertical 1G – 18G) -----End of Report----- CCIC-SET/TRF: GJ-EMC-E (2019-05-22) Page 18 of 18


Document Created: 2019-08-28 15:06:15
Document Modified: 2019-08-28 15:06:15
© 2024 FCC.report
This site is not affiliated with or endorsed by the FCC