Test Report

FCC ID: UKCA9XW

Test Report

Download: PDF
FCCID_2326086

Intertek Report Number: 101324699LAX-001 Issued: 11/28/2013 25791 Commercentre Drive Lake Forest, CA 92630 Telephone: 949-448-4100 www.intertek.com TEST REPORT Report Number: 101324699LAX-001 Project Number: G101324699 Report Issue Date: 11/28/2013 Product Name: XS4 Model Number: A9XW FCCID: UKCA9XW ICID: 10088A-A9XW FCC Standards: Title 47 CFR Part 15 Subpart B and C, 15.225 Industry Canada Standards: RSS-210 Issue 8 and ICES-003 Tested by: Client: Intertek Testing Services NA, Inc. Salto Systems S.L 25791 Commercentre Drive Pol. Lanbarren, C/ Arkotz 9 Lake Forest, CA 92630 20180-OIARTZUN Spain Report prepared by Report reviewed by David O’Reilly David Chernomordik Staff Engineer Senior Staff Engineer EMC Report for Salto Systems S.L. Model: A9XW Page 1 of 18 FCCID: UKCA9XW; ICID: 10088A-A9XW

Intertek Report Number: 101324699LAX-001 Issued: 11/28/2013 TABLE OF CONTENTS 1 Introduction and Conclusion .............................................................................................................. 3 2 Test Summary ...................................................................................................................................... 3 3 Description of Equipment Under Test ............................................................................................... 4 4 20dB Bandwidth ................................................................................................................................... 6 5 In-Band Radiated Spurious Emissions (Transmitter) ...................................................................... 7 6 Out of Band Radiated Spurious Emissions (Transmitter) ............................................................... 9 7 FCC Part 15B Radiated Emissions ................................................................................................... 11 8 AC Powerline Conducted Emissions ............................................................................................... 15 9 Frequency Stability ............................................................................................................................ 15 10 Antenna Requirement per FCC Part 15.203 ................................................................................. 17 11 Measurement Uncertainty.............................................................................................................. 17 12 Revision History ............................................................................................................................. 18 EMC Report for Salto Systems S.L. Model: A9XW Page 2 of 18 FCCID: UKCA9XW; ICID: 10088A-A9XW

Intertek Report Number: 101324699LAX-001 Issued: 11/28/2013 1 Introduction and Conclusion The tests indicated in section 2 were performed on the product constructed as described in section 3. The remaining test sections are the verbatim text from the actual data sheets used during the investigation. These test sections include the test name, the specified test method, a list of the actual test equipment used, documentation photos, results and raw data. No additions, deviations, or exclusions have been made from the standard(s) unless specifically noted. Based on the results of our investigation, we have concluded the product tested complied with the requirements of the standard(s) indicated. The results obtained in this test report pertain only to the item(s) tested. The INTERTEK-Lake Forest is located at 25791 Commercentre Drive, Lake Forest, CA 92630. The radiated emission test site is a 3-meter semi-anechoic chamber. The chamber meets the characteristics of CISPR 16-1 and ANSI C63.4. For measurements, a remotely controlled flush-mount metal-top turntable is used to rotate the EUT a full 360 degrees. A remote controlled non-conductive antenna mast is used to scan the antenna height from one to four meters. The test site is listed with the FCC under registration number 381415. The test site is listed with Industry Canada under site number IC 2042T. 2 Test Summary Page Test Name FCC Reference IC Reference Result 6 20dB Bandwidth § 2.1049 RSS-GEN (4.6.1) Pass In-Band Radiated Spurious 7 § 15.225(a)(b)(c) RSS-210 (A2.6) Pass Emissions (Transmitter) Out of Band Radiated Spurious 9 § 15.225(d), § 15.209 RSS-210 (A2.6) Pass Emissions (Transmitter) 11 FCC Part 15B Radiated Emissions § 15.109 ICES-003 Pass AC Power line Conducted 15 § 15.107, § 15.207 RSS-Gen (7.2.4) Pass Emissions 15 § 15.225(e) RSS-210 (A2.6) Pass Frequency Stability Antenna Requirement per FCC 17 § 15.203 RSS-Gen (7.1.2) Pass Part 15.203 EMC Report for Salto Systems S.L. Model: A9XW Page 3 of 18 FCCID: UKCA9XW; ICID: 10088A-A9XW

Intertek Report Number: 101324699LAX-001 Issued: 11/28/2013 3 Description of Equipment Under Test Equipment Under Test Manufacturer Salto Systems, S.L. Model Number A9XW Serial Number N/A FCC Identifier UKCA9XW IC Identifier 10088A-A9XW Receive Date 11/4/2013 Test Start Date 11/4/2013 Test End Date 11/23/2013 Device Received Condition Good Test Sample Type Production Frequency Band 13.56MHz Mode(s) of Operation RFID Transmission Control Normal Operation Antenna Type (15.203) Internal Power Supply Powered by 3 AA dry cell batteries Description of Equipment Under Test ELECTRONIC PROXIMITY XS4 LOCK A9xxxW SERIES by SALTO SYSTEMS Operating modes of the EUT: No. Descriptions of EUT Exercising 1 Transmitting its normal 13.56MHz signal. EMC Report for Salto Systems S.L. Model: A9XW Page 4 of 18 FCCID: UKCA9XW; ICID: 10088A-A9XW

Intertek Report Number: 101324699LAX-001 Issued: 11/28/2013 3.1 System setup including cable interconnection details, support equipment and simplified block diagram 3.2 EUT Block Diagram: A9XW (EUT) 3.3 Cables: Cables Connection Description Length Shielding Ferrites From To n/a n/a n/a n/a n/a n/a 3.4 Support Equipment: Support Equipment Description Manufacturer Model Number Serial Number n/a n/a n/a n/a EMC Report for Salto Systems S.L. Model: A9XW Page 5 of 18 FCCID: UKCA9XW; ICID: 10088A-A9XW

Intertek Report Number: 101324699LAX-001 Issued: 11/28/2013 4 20dB Bandwidth 4.1 Test Limits None 4.2 Test Procedure The 20dB bandwidth was measured by a spectrum analyzer connected to a receive antenna placed near the test sample while it is transmitting. 4.3 Test Equipment Used: Description Asset Number Manufacturer Model Cal. Date Cal. Due Rohde & 2/10/2013 2/10/2014 EMI Test Receiver 1140 Schwarz ESCI7 Active Loop 590 EMCO 6502 5/14/2013 5/14/2014 Antenna 4.4 Results: The 20dB bandwidth was measured to be 26.2kHz as shown below. * RBW 10 kHz Marker 1 [T1 ] * VBW 30 kHz 43.37 dBµV Ref 87 dBµV * Att 10 dB * SWT 15 ms 13.559600000 MHz ndB [T1] 20.00 dB 80 BW 26.200000000 kHz Temp 1 [T1 ndB] A 24.75 dBµV 1 SA 70 13.546600000 MHz VIEW Temp 2 [T1 ndB] 23.14 dBµV 60 13.572800000 MHz 50 PS 1 40 30 3DB T1 AC T2 20 10 0 -10 Center 13.56 MHz 10 kHz/ Span 100 kHz Date: 18.NOV.2013 16:23:13 EMC Report for Salto Systems S.L. Model: A9XW Page 6 of 18 FCCID: UKCA9XW; ICID: 10088A-A9XW

Intertek Report Number: 101324699LAX-001 Issued: 11/28/2013 5 In-Band Radiated Spurious Emissions (Transmitter) 5.1 Test Limits § 15.225 Operation within the band 13.110-14.010 MHz. (a) The field strength of any emissions within the band 13.553-13.567 MHz shall not exceed 15,848 microvolts/meter at 30 meters. (b) Within the bands 13.410-13.553 MHz and 13.567-13.710 MHz, the field strength of any emissions shall not exceed 334 microvolts/meter at 30 meters. (c) Within the bands 13.110-13.410 MHz and 13.710-14.010 MHz the field strength of any emissions shall not exceed 106 microvolts/meter at 30 meters. 5.2 Test Procedure ANSI C63.10: 2009 5.3 Example of Field Strength Calculation Method: The measured field strength was calculated by summing the readings taken from the spectrum analyzer with the appropriate correction factors associated with the antenna losses and cable losses. The calculation formula and sample calculations are listed below: Formula: FS = RA + AF + CF FS = Field Strength in dBµV/m RA = Receiver Amplitude in dBµV AF = Antenna Factor in dB CF = Cable Attenuation Factor in dB (Including preamplifier and filter attenuation) Example Calculation: RA = 19.48 dBµV AF = 18.52 dB CF = 0.78 dB FS = 19.48 + 18.52 + 0.78 = 38.78 dBµV/m Level in µV/m = Common Antilogarithm [(38.78 dBµV/m)/20] = 86.89 µV/m 5.4 Test Equipment Used: Description Asset Number Manufacturer Model Cal. Date Cal. Due Rohde & 9/11/2013 9/11/2014 EMI Test Receiver 10887490.26 Schwarz ESCI7 Active Loop 590 EMCO 6502 4/19/2013 4/19/2014 Antenna Biconnilog 1174 TESEQ CBL6112D 2/01/2013 2/01/2014 Antenna RF Cable 798 n/a n/a 7/9/2013 7/9/2014 EMC Report for Salto Systems S.L. Model: A9XW Page 7 of 18 FCCID: UKCA9XW; ICID: 10088A-A9XW

Intertek Report Number: 101324699LAX-001 Issued: 11/28/2013 5.5 Results: The spurious emissions listed in the following tables are the worst case emissions. Emissions not reported were at or below the measurement noise floor. Worst Case Spurious Emissions (Radio Transmitting) A B C D E F G H J K 30m 3m Corr Corr 30m Test Freq RA QP Antenna Cable reading reading Limit Delta Distance Results MHz (dBµV) (dB) (dB) dBµV/m dBµV/m dBµV/m (dB) meters 13.56 45.52 10.9 0.6 57.02 17.02 84 -66.98 3 Compliant Calculations: E=B+C+D F = E - 40dB H = F - G RBW / QP = 9KHz / QP Notes: (1) The test sample was evaluated on one orthogonal axis since the product could only be mounted in one orientation. (2) All measurements were performed with a loop antenna positioned in three orthogonal axis with the level at the highest position being recorded. (3) Measurements were performed at 3m distance and the level extrapolated to the specified measurement distance of 30m. An inverse linear distance extrapolation factor of 40dB/decade 2 (from part 15.31(f)) was used to facilitate this. Extrapolation Factor = 20log(30/3) = 40dB. (4) All emissions in the frequency bands 13.410-13.553 MHz, 13.567-13.710, 13.110-13.410 MHz and 13.710-14.010 MHz were more than 20dB below the limits. EMC Report for Salto Systems S.L. Model: A9XW Page 8 of 18 FCCID: UKCA9XW; ICID: 10088A-A9XW

Intertek Report Number: 101324699LAX-001 Issued: 11/28/2013 6 Out of Band Radiated Spurious Emissions (Transmitter) 6.1 Test Limits 6.2 § 15.225 Operation within the band 13.110-14.010 MHz. (d) The field strength of any emissions appearing outside of the 13.110-14.010 MHz band shall not exceed the general radiated emission limits in § 15.209. Part 15.209(a): Field General Strength Limits for Restricted Bands of Operation 6.3 Test Procedure ANSI C63.4: 2009 6.4 Example of Field Strength Calculation Method: The measured field strength was calculated by summing the readings taken from the spectrum analyzer with the appropriate correction factors associated with the antenna losses and cable losses. The calculation formula and sample calculations are listed below: Formula: FS = RA + AF + CF FS = Field Strength in dBµV/m RA = Receiver Amplitude in dBµV AF = Antenna Factor in dB CF = Cable Attenuation Factor in dB (Including preamplifier and filter attenuation) Example Calculation: RA = 19.48 dBµV AF = 18.52 dB CF = 0.78 dB FS = 19.48 + 18.52 + 0.78 = 38.78 dBµV/m Level in µV/m = Common Antilogarithm [(38.78 dBµV/m)/20] = 86.89 µV/m\ 6.5 Test Equipment Used: Description Asset Number Manufacturer Model Cal. Date Cal. Due Rohde & 9/11/2013 9/11/2014 EMI Test Receiver 10887490.26 Schwarz ESCI7 Active Loop 590 EMCO 6502 4/19/2013 4/19/2014 Antenna Biconnilog 1147 TESEQ CBL6112D 2/01/2013 2/01/2014 Antenna RF Cable 798 n/a n/a 7/9/2013 7/9/2014 EMC Report for Salto Systems S.L. Model: A9XW Page 9 of 18 FCCID: UKCA9XW; ICID: 10088A-A9XW

Intertek Report Number: 101324699LAX-001 Issued: 11/28/2013 6.6 Results: All of the out of band emissions were below the general limits from Part 15.209. The sample was tested from 9kHz – 1GHz excluding the in band 13.110 – 14.010 MHz range. The spurious emissions listed in the following tables are the worst case emissions. Worst Case Out of Band Spurious Emissions (Radio Transmitting) A B C D E F G J K RA Ant Cable Corr Limit Margin RBW/ Freq. MHz (dBµV) (dB) (dB) dBµV/m dBµV/m dB/m Dist Detector 25.56 25.56 10.1 0.9 36.56 69.54 -32.98 3 QP / 9KHz 27.12 11.04 9.4 0.9 21.34 69.54 -48.2 3 QP / 9KHz 40.68 20.7 14 0.96 35.66 40 -4.34 3 P / 120KHz 54.24 21.01 8.4 1.27 30.68 40 -9.32 3 P / 120KHz 67.8 23.9 6 1.3 31.2 40 -8.8 3 P / 120KHz 81.36 22.04 7.9 1.4 31.34 40 -8.66 3 P / 120KHz 94.92 25.48 10.4 1.5 37.38 43.52 -6.14 3 QP / 120KHz 108.48 24.91 12.4 1.6 38.91 43.52 -4.61 3 P / 120KHz 122 22.25 12.9 1.75 36.9 43.52 -6.62 3 P / 120KHz 135.6 20.14 12.4 1.76 34.3 43.52 -9.22 3 P / 120KHz Calculations: E=B+C+D G=F-G Notes: (1) The test sample was evaluated on three orthogonal axes since it was a module and could be used in any orientation. (2) All measurements below 30MHz were performed with a loop antenna positioned in three orthogonal axis with the level at the highest position being recorded. (3) All measurements above 30MHz were performed with a bilog antenna maximized from 1-4m in height and in vertical and horizontal polarities. (4) Measurements were performed at 3m distance. EMC Report for Salto Systems S.L. Model: A9XW Page 10 of 18 FCCID: UKCA9XW; ICID: 10088A-A9XW

Intertek Report Number: 101324699LAX-001 Issued: 11/28/2013 7 FCC Part 15B Radiated Emissions 7.1 Method ANSI C63.4: 2009 7.2 Test Location This test was performed at the Intertek offices located at the following address: Intertek 25791 Commercentre Drive Lake Forest, CA. 92630 7.3 Test Equipment Used: Description Serial Number Manufacturer Model Cal. Date Cal. Due Rohde & 9/11/2013 9/11/2014 EMI Test Receiver 10887490.26 Schwarz ESI26 Preamplifier SF456200904 Mini-Circuits ZX60-3018G-S+ 9/11/2013 9/11/2014 Biconnilog 12/14/2012 12/14/2013 Antenna 00051864 ETS 3142C Active Loop 3416 ETS 6502 4/19/2013 4/19/2014 Antenna Calibration Calibration Not Not System Controller 121701-1 Sunol Sciences SC99V Required Required EMC Report for Salto Systems S.L. Model: A9XW Page 11 of 18 FCCID: UKCA9XW; ICID: 10088A-A9XW

Intertek Report Number: 101324699LAX-001 Issued: 11/28/2013 7.4 Results and Data: The sample tested was found to Comply. Test: Radiated Emissions Frequency Range: 9KHz to 1000 MHz Measurement Uncertainty: 4.2 dB Limits: Class B Temperature: 23.9 ˚C Measurement Distance: 3 meters Relative Humidity: 50.6 % EUT: P023 (Compact Console Unit Host Equipment) Power Input: Battery FCC, pat 15 per 15.209 Horzontal Frequency Quasi Pk FS Limit@3m Margin RA AG AF CF DCF H/V MHz dB(uV/m) dB(uV/m) dB dB(uV) dB dB(1/m) dB dB 30.588 (*) 34.5 40 -5.5 14.4 0 19.2 0.9 0 94.103 26.3 43.5 -17.2 14.4 0 10.4 1.5 0 203.395 30.2 43.5 -13.3 17.3 0 10.7 2.1 0 216.953 28.9 46 -17.1 16.5 0 10.2 2.2 0 230.514 30.3 46 -15.7 16.9 0 11.2 2.3 0 244.246 29.5 46 -16.5 14.7 0 12.5 2.3 0 Detectors/Bandwithds (Det/RBW/VBW)= 120/300kHz FCC, pat 15 per 15.209 Vertical Frequency Quasi Pk FS Limit@3m Margin RA AG AF CF DCF H/V MHz dB(uV/m) dB(uV/m) dB dB(uV) dB dB(1/m) dB dB 41.36 27.7 40 -12.3 15.5 0 11.2 1 0 203.391 34 43.5 -9.5 20.9 0 11 2.1 0 216.956 29.2 46 -16.8 16.4 0 10.6 2.2 0 230.515 39.2 46 -6.8 25.4 0 11.5 2.3 0 244.072 30.7 46 -15.3 15.8 0 12.6 2.3 0 473.14 25.8 46 -20.2 16.5 0 8.2 1.1 0 Detectors/Bandwithds (Det/RBW/VBW)= 120/300kHz Quasi FS – (Final) Quasi Peak Field Strength RA – Receiver (quasi peak) Amplitude AG – Preamp Gain AF – Antenna Factor CF – Cable Factor DCF – Distance Correction Factor Calculation: FS=RA+AF+CF-AG-DCF Test Result: (*)The EUT PASSED Radiated Emission test with 5.5 dB margin at 30.558 MHz. Deviations, Additions, or Exclusions: None EMC Report for Salto Systems S.L. Model: A9XW Page 12 of 18 FCCID: UKCA9XW; ICID: 10088A-A9XW

Intertek Report Number: 101324699LAX-001 Issued: 11/28/2013 7.5 Plots: Test Mode: battery operated, transmitter is active. Intertek Lim it at 3 m Temperature: 25.2 C Radiated Emissions 30 MHz - 1000 MHz P eak Scan V er tical Humidity : 40.5%. 987.2 mbar QP Level FCC Part 15 Class B (Vertical) 60.0 50.0 Am plitude (dBuV/m ) 40.0 30.0 20.0 10.0 0 10.0M 100.0M 1.0G Frequency (Hz ) Model N umber: XS4 Operator: David O'Reilly ITS Job Number: G101324699 01:04:26 PM, Wednesday, November 13, 2013 Company: Salto Systems S.L FCC part 15.209 Vertical 30-1000MHz Test Mode: battery operated, transmitter is active. Intertek Lim it at 3 m Temperature: 25.2 C Radiated Emissions 30 MHz - 1000 MHz Peak Scan Hor izontal H umidity : 40.5%. 987.2 mbar QP Level FCC Part 15 Class B (Horiz ontal) 60.0 50.0 Am plitude (dBuV/m ) 40.0 30.0 20.0 10.0 0 10.0M 100.0M 1.0G Frequency (H z) Model N umber: XS4 Operator: David O'Reilly ITS Job Number: G101324699 01:26:59 PM, Wednesday, November 13, 2013 Company: Salto Systems S.L FCC part 15.209 Horizontal 30-1000MHz EMC Report for Salto Systems S.L. Model: A9XW Page 13 of 18 FCCID: UKCA9XW; ICID: 10088A-A9XW

Intertek Report Number: 101324699LAX-001 Issued: 11/28/2013 7.6 Setup Photos: 9kHz – 30MHz setup 30 MHz – 1000MHz setup EMC Report for Salto Systems S.L. Model: A9XW Page 14 of 18 FCCID: UKCA9XW; ICID: 10088A-A9XW

Intertek Report Number: 101324699LAX-001 Issued: 11/28/2013 8 AC Power line Conducted Emissions 8.1 Test Limits § 15.107(e): Except as shown in paragraphs (b) and (c) of this section, for an intentional radiator that is designed to be connected to the public utility (AC) power line, the radio frequency voltage that is conducted back onto the AC power line on any frequency or frequencies, within the band 150 kHz to 30 MHz, shall not exceed the limits in the following table, as measured using a 50 µH/50 ohms line impedance stabilization network (LISN). Compliance with the provisions of this paragraph shall be based on the measurement of the radio frequency voltage between each power line and ground at the power terminal. The lower limit applies at the boundary between the frequency ranges. Conducted limit (dBµV) Frequency of emission (MHz) Quasi-peak Average 0.15–0.5 66 to 56* 56 to 46* 0.5–5 56 46 5–30 60 50 *Decreases with the logarithm of the frequency. 8.2 Test Procedure ANSI C63.4: 2009 8.3 Test Equipment Used: Description Serial Number Manufacturer Model Cal. Date Cal. Due EMI Test 10887490.26 Rohde & ESI26 9/11/2013 9/11/2014 Receiver Schwarz LISN 3333 Teseq NNB52 3/11/2013 3/11/2014 8.4 Results: This test does not apply since the EUT is battery powered, and has no connection to the AC mains. 9 Frequency Stability 9.1 Test Limits 9.2 § 15.225 Operation within the band 13.110-14.010 MHz. (e) The frequency tolerance of the carrier signal shall be maintained within ±0.01% of the operating frequency over a temperature variation of −20 degrees to +50 degrees C at normal supply voltage, and for a variation in the primary supply voltage from 85% to 115% of the rated supply voltage at a temperature of 20 degrees C. For battery operated equipment, the equipment tests shall be performed using a new battery. EMC Report for Salto Systems S.L. Model: A9XW Page 15 of 18 FCCID: UKCA9XW; ICID: 10088A-A9XW

Intertek Report Number: 101324699LAX-001 Issued: 11/28/2013 9.3 Results: The data below shows that the test sample meets the frequency stability requirements from Part 15.225. Frequency Stability Test Data Operating Frequency 13,560,000 Channel: RFID Single Channel Reference Voltage: 4.5VDC battery operated by 3 AAA cells Deviation Limit 0.01% of 13.56MHz = 1,356Hz (±): Notes: Voltage Voltage Temp Interval Frequency Deviation Deviation (%) (VDC) (°C) Minutes (Hz) (Hz) (%) 3 x AA 4.21 -30° Startup 13,560,800 800.00 0.006 3 x AA -30° 2 min 13,560,800 800.00 0.006 3 x AA -30° 5 min 13,560,800 800.00 0.006 3 x AA -30° 10 min 13,560,800 800.00 0.006 3 x AA 4.25 -20° Startup 13,560,400 400.00 0.003 3 x AA -20° 2 min 13,560,400 400.00 0.003 3 x AA -20° 5 min 13,560,400 400.00 0.003 3 x AA -20° 10 min 13,560,400 400.00 0.003 3 x AA 4.32 -10° Startup 13,560,400 400.00 0.003 3 x AA -10° 2 min 13,560,400 400.00 0.003 3 x AA -10° 5 min 13,560,400 400.00 0.003 3 x AA -10° 10 min 13,560,400 400.00 0.003 3 x AA 4.29 0° Startup 13,560,400 400.00 0.003 3 x AA 0° 2 min 13,560,400 400.00 0.003 3 x AA 0° 5 min 13,560,400 400.00 0.003 3 x AA 0° 10 min 13,560,400 400.00 0.003 3 x AA 4.27 10° Startup 13,560,400 400.00 0.003 3 x AA 10° 2 min 13,560,400 400.00 0.003 3 x AA 10° 5 min 13,560,400 400.00 0.003 3 x AA 10° 10 min 13,560,400 400.00 0.003 3 x AA 4.23 20° Startup 13,560,400 400.00 0.003 3 x AA 20° 2 min 13,560,400 400.00 0.003 3 x AA 20° 5 min 13,560,400 400.00 0.003 3 x AA 20° 10 min 13,560,400 400.00 0.003 3 x AA 4.25 30° Startup 13,564,000 0.00 0 3 x AA 30° 2 min 13,564,000 0.00 0 3 x AA 30° 5 min 13,564,000 0.00 0 3 x AA 30° 10 min 13,564,000 0.00 0 3 x AA 4.35 40° Startup 13,564,000 0.00 0 3 x AA 40° 2 min 13,564,000 0.00 0 3 x AA 40° 5 min 13,564,000 0.00 0 3 x AAA 40° 10 min 13,560,000 0.00 0 EMC Report for Salto Systems S.L. Model: A9XW Page 16 of 18 FCCID: UKCA9XW; ICID: 10088A-A9XW

Intertek Report Number: 101324699LAX-001 Issued: 11/28/2013 10 Antenna Requirement per FCC Part 15.203 10.1 Test Limits § 15.203: An intentional radiator shall be designed to ensure that no antenna other than that furnished by the responsible party shall be used with the device. The use of a permanently attached antenna or of an antenna that uses a unique coupling to the intentional radiator shall be considered sufficient to comply with the provisions of this section. The manufacturer may design the unit so that a broken antenna can be replaced by the user, but the use of a standard antenna jack or electrical connector is prohibited. This requirement does not apply to carrier current devices or to devices operated under the provisions of §15.211, §15.213, §15.217, §15.219, or §15.221. Further, this requirement does not apply to intentional radiators that must be professionally installed, such as perimeter protection systems and some field disturbance sensors, or to other intentional radiators which, in accordance with §15.31(d), must be measured at the installation site. However, the installer shall be responsible for ensuring that the proper antenna is employed so that the limits in this part are not exceeded. 10.2 Results: The sample tested met the antenna requirement. The antenna was a pcb loop antenna permanently attached to the circuit board. 11 Measurement Uncertainty The measured value related to the corresponding limit will be used to decide whether the equipment meets the requirements. The measurement uncertainty figures were calculated and correspond to a coverage factor of k = 2, providing a confidence level of respectively 95.45 % in the case where the distributions characterizing the actual measurement uncertainties are normal (Gaussian). Measurement uncertainty Table Parameter Uncertainty Notes Radiated emissions, 30 to 1000 MHz +3.9dB Radiated emissions, 1 to 18 GHz +4.2dB Radiated emissions, 18 to 40 GHz +4.3dB Power Port Conducted emissions, 150kHz to 30 +2.8dB MHz EMC Report for Salto Systems S.L. Model: A9XW Page 17 of 18 FCCID: UKCA9XW; ICID: 10088A-A9XW

Intertek Report Number: 101324699LAX-001 Issued: 11/28/2013 12 Revision History Revision Date Report Number Notes Level 0 11/28/2013 101324716LAX-001 Original Issue EMC Report for Salto Systems S.L. Model: A9XW Page 18 of 18 FCCID: UKCA9XW; ICID: 10088A-A9XW


Document Created: 2014-07-13 11:01:40
Document Modified: 2014-07-13 11:01:40
© 2024 FCC.report
This site is not affiliated with or endorsed by the FCC