Manual - Model YRD110-ZW-US

FCC ID: U4A-YRIZW1US

Users Manual

Download: PDF
FCCID_2235274

Certification Exhibit FCC ID: U4A-YRIZW1US IC: 6982A-YRIZW1US FCC Rule Part: 15.249 IC Radio Standards Specification: RSS-210 ACS Project Number: 14-0099 Manufacturer: Assa Abloy Inc. Models: YRD110-ZW-US, YRD120-ZW-US Manual 5015 B.U. Bowman Drive Buford, GA 30518 USA Voice: 770-831-8048 Fax: 770-831-8598

Yale Real Living™ Key Free Push Button Deadbolt B1L with WAVE Installation and Programming Instructions ® Preparing Door 1 Installing Latch & Strike Plate 2-3/8" position 2 Installing Keypad Escutcheon 3 Installing Interior Mounting Plate UP x4 2-3/4" position Inside of Door Outside of Door O optional UP Pull x2 Press Bolt must be in retracted (unlocked) position. Note ! horizontal orientation of mechanism. x3 #8-32 x 5/16’’ Machine screws x4 #7 wood & #8-32 machine x 20mm ! Combination screws Bolt must be in retracted x2 (unlocked) position. Note M6x47mm horizontal orientation of Long through bolt mechanism. P/N AYRD-110-INST-FUL Rev A 4 Attaching the Cable Assembly 5 Installing Interior Escutcheon Testing Operation Handing the Lock 6 Installing Cover Press . Press . Enter new Master PIN code (4-8 digits). Press to complete. x3 Congratulations, you've installed the Yale Real Living™ Key Free Push Button Deadbolt B1Lwith WAVE ! Turn ® After entering the Master PIN sheet over for Programming Instructions to customize code, press any key to complete your product. ! handing. Bolt must be in retracted (unlocked) position before installing batteries.

Programming Instructions Low Battery Warning- Flashes RED 1 Creating Master PIN Code Press 2 Creating User PIN Codes Master PIN code must be created first. *Max User Codes = 100 3 Unlocking Door with PIN Code Resetting Lock to Factory Default When lock is reset to factory defaults all user codes (including the Master PIN code*) Lock-out Mode- Keypad Flashes are deleted and all programming features Enter PIN Enter Master PIN code Press are reset to original default settings (see Press Press Press "Factory Default Settings"). "Unlock" 1. Remove the battery cover. 2. Remove the batteries. 3. While pressing the reset button (minimum of 3 seconds) reinstall batteries. Release reset button. 4. Replace battery cover. Upon reset, Master Code creation is the only option available and must be performed prior to any other programming of the lock. NOTE: After setting the Master Code, press Press any key to complete handing of the lock. Press Enter User number to be created Press (1-100)*. Code Chart Duplicate if necessary Press Press PIN Code Management (With Network Module - Up to 100 Users) Enrolling Lock In ® Network User Type User Name User # PIN Code Your network controller first needs to be in enrollment or exclusion mode for the lock to Master be enrolled or removed from network. User ___ Once you put the controller in the User ___ enrollment or exclusion mode, the lock can User ___ be enrolled or removed in the Z-Wave® network two ways - through the keypad User ___ using the #7 key (see Programming User ___ Through Menu Mode) or by pressing the button. User ___ Enter 4-8 To enroll lock using the button option: digit Master Enter 4-8 digit PIN code 0:20 User ___ 1. Remove the battery cover. PIN Code. Press STOP User ___ 2. Press button and hold until unit beeps two (2) times. Press User ___ 3. Release button and network joining User ___ automatically begins. 4. Replace battery cover. User ___ Failsafe 9 volt To remove lock using the button option: Battery Connection User ___ 1. Remove the battery cover. User ___ 2. Press button and hold until unit beeps Master PIN Code must be created before any further programming. five (5) times. Max User Codes = 100 User ___ 3. Release button and network removal ! Warning: Changes or modifications to this device, not expressly approved by Yale Security Inc. could void the user's authority to operate the equipment. User ___ User ___ automatically begins. 4. Replace battery cover. Definitions Feature Programming Through Menu Mode Programming Troubleshooting FCC: FCC ID: U4A-YRIZW1US (Z-Wave®) Symptom Suggested Action All Code Lockout Mode: This feature is enabled by the Master code. When enabled, it Using Master PIN code* • Press each keypad button for response when pressed. Model(s): YRD110-ZW-US This equipment has been tested and found to comply with the limits for a Class B digital restricts all user (except Master) PIN code access. When attempting to enter a code while • Check batteries are installed and oriented correctly (polarity) Lock does not respond – device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide the unit is in Lockout, the Status Indicator flashes RED (8 times); the keypad flashes as well. 1. Enter the 4-8 digit Master PIN code followed by the key. door is open and in the battery case. accessible. • Check batteries are in good condition; replace batteries* reasonable protection against harmful interference in a residential installation. This 2. Enter digit corresponding to the function to be performed followed by the key. if discharged. equipment generates, uses, and can radiate radio frequency energy and, if not installed and Audio Mode: Choosing Disable (3) in Audio mode shuts off the code confirmation tone play-back for use in quiet areas. Audio mode is enabled or disabled through feature Note: If the lock is connected to a network controller, it is recommended that it is • Check to see if cable is fully connected and not pinched. used in accordance with the instructions, may cause harmful interference to radio programming by the Master code. programmed through the centralized user interface (PC or hand-held device) to Lock does not respond – communications. However, there is no guarantee that interference will not occur in a ensure communication between the lock and the controller unit. • Batteries may be completely discharged. door is locked and • Apply 9V battery to terminals below the keypad for backup particular installation. If this equipment does cause harmful Interference to radio or Automatic Re-lock Time: After a successful unlock, the unit will automatically re-lock after a *The Master PIN code must be registered prior to any other programming inaccessible. power option. television reception, which can be determined by turning the equipment off and on, the user default of thirty (30) seconds. Re-lock time is adjustable** from 10-180 seconds. of the lock. is encouraged to try to correct the interference by one or more of the following measures: Unit chimes to indicate • Check to see if there is another locking device on the door.  Reorient or relocate the receiving antenna. 1 2 code acceptance, but the • Check the door gaps for any foreign objects between door Low Battery: When battery power is low, the Status Indicator flashes RED. If battery power door will not open. and frame.  Increase the separation between the equipment and receiver. M M User Number (UN) • Check that the cable is firmly connected to the PC board.  Connect the equipment into an outlet on a circuit different from that to which the is completely lost, use the 9Volt battery override. To use the 9V battery override apply 9V Master PIN Code Setting 1~100: with network module Unit operates to allow receiver is connected. battery, in either direction, to terminals below the keypad for backup power option. Wake up U • Check to see if Auto Re-lock Mode is enabled. User PIN Code Registration Register access, but will not  Consult the dealer or an experienced radio/TV technician for help. the lock and enter your pin code to unlock the door. automatically re-lock. • If low battery indicator is lit (see below), change batteries*. Delete • PIN codes must consist of 4 to 8 digits to register. Industry Canada: Master PIN Code: The Master PIN code is used for programming and for feature settings. It • The same PIN code cannot be used for multiple users. must be created prior to programming the lock. The Master code will also operate PIN codes will not register. Canadian ID: 6982A-YRIZW1US (Z-Wave®) • Registration/management of PIN codes is set by the (unlock/lock) the lock. Advanced Lock Settings Automatic Re-lock Enable Model(s): YRD110-ZW-US authority of the Master Code. • Contact the Master user. This Class B digital apparatus meets all requirements of the Canadian Interference Causing Disable Network Setting: This setting is available thru the main Menu (7) and allows the lock to • User codes must be entered within 5 seconds or the Equipment Regulations. Operation is subject to the following two conditions: (1) this device connect with a network controller. It is also available through the wireless button on the One Touch Locking Enable process will have to be restarted. may not cause harmful interference, and (2) this device must accept any interference Default settings • Check mark or gear cannot be used as part of the received, including interference that may cause undesired operation. interior escutcheon . Disable in bold. PIN code. Cet appareillage numérique de la classe B répond à toutes les exigences de l'interférence Handing the Lock Performs Upon entering a PIN code canadienne causant des règlements d'équipement. L'opération est sujette aux deux One Touch Locking: When the latch is retracted, activating the keypad will extend the latch automatic (during Automatic Re-lock duration or when Automatic Re-lock is disabled). and pressing the (*) key, the • All Code Lockout Mode is enabled. conditions suivantes: (1) ce dispositif peut ne pas causer l'interférence nocive, et (2) ce handing of Audio Mode Enable the lock. lock gives a series of beeps, • Only the Master can enable/disable All Code Lockout Mode. dispositif doit accepter n'importe quelle interférence reçue, y compris l'interférence qui flashes red & blue LEDs 7 • Contact the Master user. peut causer l'opération peu désirée. Shutdown Time: The unit will shutdown for a default of sixty (60) seconds and not allow For quiet areas, select Disable (3) times, and does not unlock. Disable in Audio Mode. operation after the wrong code entry limit has been met. When the unit is in Shutdown, the Upon entering a PIN code • Check to see if the lock is set to All Code Lockout Mode. Status Indicator flashes RED; the keypad flashes as well. N/A Section 7.1.2 of RSS-GEN Under Industry Canada regulations, this radio transmitter may and pressing the (*) key, • Setting/managing All Code Lockout Mode is done through there are different tones. Master Code only. Contact the Master user. only operate using an antenna of a type and maximum (or lesser) gain approved for the All Code Lockout Mode Enable The unit operates, but it transmitter by Industry Canada. To reduce potential radio interference to other users, the Tamper Alert: Audible alarm sounds if attempting to forcibly remove outside lock from door. • Enable Audio Mode. makes no sound. antenna type and its gain should be so chosen that the equivalent isotropically radiated Disable User PIN Code: The User code operates the lock. Maximum number of user codes is 100. • This is the Low Battery indicator alerting that it is time to power (e.i.r.p.) is not more than that necessary for successful communication. Product Support Tel 800.810.WIRE (9473) • www.yalelocks.com The unit displays inter- Network Setting Join the network replace the batteries. Replace all four (4) batteries* with En vertu des règlements d'Industrie Canada, cet émetteur radio ne peut fonctionner avec mittent RED flashes. Yale Locks & Hardware is a division of Yale Security Inc., an ASSA ABLOY Group company. new AA Alkaline batteries. une antenne d'un type et un maximum (ou moins) approuvés pour gagner de l'émetteur par Wrong Code Entry Limit: After a specified number of unsuccessful attempts at entering a Upon entering a PIN code Exit the network Industrie Canada. Pour réduire le risque d'interférence aux autres utilisateurs, le type valid PIN code, the unit will shut down and not allow operation. Wrong code entry limit is and pressing the (*) key, • The digits entered were incorrect or incomplete. Re-enter adjustable from three (3) to ten (10) times**. Default is 5. Factory Default Settings the unit responds with a series of beeps and the the correct code followed by the check mark (*) key. d'antenne et son gain doivent être choisies de façon que la puissance isotrope rayonnée équivalente (PIRE) ne dépasse pas ce qui est nécessaire pour une communication réussie. Yale® is a registered trademark of Yale Security Inc., an ASSA ABLOY Group company. Yale Real Living™ is a trademark of Yale Security Inc., an ASSA ABLOY Group company. keypad flashes three times. Copyright © 2014, Yale Security Inc., an ASSA ABLOY Group company. Settings Factory Default * When batteries are replaced, Network locks have a real time clock that will be set through the User Interface (UI); it **Adjustable through a Z-Wave® controller. is recommended to verify correct date and time particularly those locks operating under Daylight Saving Time (DST). Section 7.1.3 of RSS-GEN This Device complies with Industry Canada License-exempt RSS All rights reserved. Reproduction in whole or in part without the express written permission Master PIN Code Registration required* of Yale Security Inc. is prohibited. standard(s). Operation is subject to the following two conditions: 1) this device may not Automatic Re-lock Disabled cause interference, and 2) this device must accept any interference, including interference One Touch Locking Enabled that may cause undesired operation of the device. Audio Enabled Cet appareil est conforme avec Industrie Canada RSS standard exemptes de licence(s). Son Automatic Re-lock Time **30 Seconds fonctionnement est soumis aux deux conditions suivantes: 1) ce dispositif ne peut causer YALE, with its unique global reach and range of products, is the world's favorite lock – the preferred solution for securing your home, family and personal belongings. Wrong Code Entry Limit **5 Times des interférences, et 2) cet appareil doit accepter toute interférence, y compris les Shutdown Time **60 Seconds interférences qui peuvent causer un mauvais fonctionnement du dispositif. *The Master PIN code must be registered prior to any other programming of the lock. ASSA ABLOY is the global leader in door opening solutions, **Adjustable through a Z-Wave® controller. dedicated to satisfying end-user needs for security, safety and convenience.


Document Created: 2014-04-02 09:53:14
Document Modified: 2014-04-02 09:53:14
© 2024 FCC.report
This site is not affiliated with or endorsed by the FCC