SAR Test Report II

FCC ID: TZ5XT

RF Exposure Info

Download: PDF
FCCID_1174538

Report No.: M080928 Page 20 of 52 APPENDIX B PLOTS OF THE SAR MEASUREMENTS Plots of the measured SAR distributions inside the phantom are given in this Appendix for all tested configurations. The spatial peak SAR values were assessed with the procedure described in this report. Table: 1600 MHz SAR Plots Test Position Antenna Plot Test Number Channel Retracted 1 0544 Touch Right Extended 2 0544 Retracted 3 0544 Tilted Right Extended 4 0544 5 0001 Retracted 6 0544 Touch Left 7 1087 Extended 8 0544 Retracted 9 0544 Tilted Left Extended 10 0544 Table: SAR Validation Plots Date Plot Number Frequency 1st October 2008 11 1640 MHz This document must not be copied or reproduced, except in full without the written permission of the Manager, EMC Technologies Pty Ltd. The certificate on page 3 may be reproduced in full. www.emctech.com.au

Report No.: M080928 Page 21 of 52 Test Date: 1 October 2008 File Name: Touch Right 1600 MHz (DAE442 Probe1380) 01-10-08.da4 DUT: Thuraya Satellite Phone; Type: XT; Serial: IMEI:35697802-010029-0 * Communication System: 1640 MHz Satellite; Frequency: 1643 MHz; Duty Cycle: 1:8 * Medium parameters used: f = 1642 MHz; σ = 1.33 mho/m; εr = 39.5; ρ = 1000 kg/m3 - Electronics: DAE3 Sn442; Probe: ET3DV6 - SN1380; ConvF(5.6, 5.6, 5.6) - Phantom: SAM 22; Serial: 1260; Phantom section: Right Section Channel 0544 Test/Area Scan (131x61x1): Measurement grid: dx=15mm, dy=15mm Maximum value of SAR (interpolated) = 0.397 mW/g Channel 0544 Test/Zoom Scan (7x7x7)/Cube 0: Measurement grid: dx=5mm, dy=5mm, dz=5mm Reference Value = 7.76 V/m; Power Drift = -0.031 dB Peak SAR (extrapolated) = 0.518 W/kg SAR(1 g) = 0.361 mW/g; SAR(10 g) = 0.232 mW/g Maximum value of SAR (measured) = 0.405 mW/g 0 dB = 0.405mW/g SAR MEASUREMENT PLOT 1 Ambient Temperature 20.7 Degrees Celsius Liquid Temperature 20.5 Degrees Celsius Humidity 33.0 % This document must not be copied or reproduced, except in full without the written permission of the Manager, EMC Technologies Pty Ltd. The certificate on page 3 may be reproduced in full. www.emctech.com.au

Report No.: M080928 Page 22 of 52 This document must not be copied or reproduced, except in full without the written permission of the Manager, EMC Technologies Pty Ltd. The certificate on page 3 may be reproduced in full. www.emctech.com.au

Report No.: M080928 Page 23 of 52 Test Date: 1 October 2008 File Name: Touch Right Extended Antenna 1600 MHz (DAE442 Probe1380) 01-10-08.da4 DUT: Thuraya Satellite Phone; Type: XT; Serial: IMEI:35697802-010029-0 * Communication System: 1640 MHz Satellite; Frequency: 1643 MHz; Duty Cycle: 1:8 * Medium parameters used: f = 1642 MHz; σ = 1.33 mho/m; εr = 39.5; ρ = 1000 kg/m3 - Electronics: DAE3 Sn442; Probe: ET3DV6 - SN1380; ConvF(5.6, 5.6, 5.6) - Phantom: SAM 22; Serial: 1260; Phantom section: Right Section Channel 0544 Test/Area Scan (171x61x1): Measurement grid: dx=15mm, dy=15mm Maximum value of SAR (interpolated) = 0.070 mW/g Channel 0544 Test/Zoom Scan (7x7x7)/Cube 0: Measurement grid: dx=5mm, dy=5mm, dz=5mm Reference Value = 7.73 V/m; Power Drift = -0.043 dB Peak SAR (extrapolated) = 0.087 W/kg SAR(1 g) = 0.065 mW/g; SAR(10 g) = 0.045 mW/g Maximum value of SAR (measured) = 0.069 mW/g 0 dB = 0.069mW/g SAR MEASUREMENT PLOT 2 Ambient Temperature 20.7 Degrees Celsius Liquid Temperature 20.5 Degrees Celsius Humidity 33.0 % This document must not be copied or reproduced, except in full without the written permission of the Manager, EMC Technologies Pty Ltd. The certificate on page 3 may be reproduced in full. www.emctech.com.au

Report No.: M080928 Page 24 of 52 This document must not be copied or reproduced, except in full without the written permission of the Manager, EMC Technologies Pty Ltd. The certificate on page 3 may be reproduced in full. www.emctech.com.au

Report No.: M080928 Page 25 of 52 Test Date: 1 October 2008 File Name: Tilted Right 1600 MHz (DAE442 Probe1380) 01-10-08.da4 DUT: Thuraya Satellite Phone; Type: XT; Serial: IMEI:35697802-010029-0 * Communication System: 1640 MHz Satellite; Frequency: 1643 MHz; Duty Cycle: 1:8 * Medium parameters used: f = 1642 MHz; σ = 1.33 mho/m; εr = 39.5; ρ = 1000 kg/m3 - Electronics: DAE3 Sn442; Probe: ET3DV6 - SN1380; ConvF(5.6, 5.6, 5.6) - Phantom: SAM 22; Serial: 1260; Phantom section: Right Section Channel 0544 Test/Area Scan (131x61x1): Measurement grid: dx=15mm, dy=15mm Maximum value of SAR (interpolated) = 0.381 mW/g Channel 0544 Test/Zoom Scan (7x7x7)/Cube 0: Measurement grid: dx=5mm, dy=5mm, dz=5mm Reference Value = 9.41 V/m; Power Drift = 0.039 dB Peak SAR (extrapolated) = 0.474 W/kg SAR(1 g) = 0.347 mW/g; SAR(10 g) = 0.217 mW/g Maximum value of SAR (measured) = 0.382 mW/g 0 dB = 0.382mW/g SAR MEASUREMENT PLOT 3 Ambient Temperature 20.7 Degrees Celsius Liquid Temperature 20.5 Degrees Celsius Humidity 33.0 % This document must not be copied or reproduced, except in full without the written permission of the Manager, EMC Technologies Pty Ltd. The certificate on page 3 may be reproduced in full. www.emctech.com.au

Report No.: M080928 Page 26 of 52 This document must not be copied or reproduced, except in full without the written permission of the Manager, EMC Technologies Pty Ltd. The certificate on page 3 may be reproduced in full. www.emctech.com.au

Report No.: M080928 Page 27 of 52 Test Date: 1 October 2008 File Name: Tilted Right Extended Antenna 1600 MHz (DAE442 Probe1380) 01-10-08.da4 DUT: Thuraya Satellite Phone; Type: XT; Serial: IMEI:35697802-010029-0 * Communication System: 1640 MHz Satellite; Frequency: 1643 MHz; Duty Cycle: 1:8 * Medium parameters used: f = 1642 MHz; σ = 1.33 mho/m; εr = 39.5; ρ = 1000 kg/m3 - Electronics: DAE3 Sn442; Probe: ET3DV6 - SN1380; ConvF(5.6, 5.6, 5.6) - Phantom: SAM 22; Serial: 1260; Phantom section: Right Section Channel 0544 Test/Area Scan (171x61x1): Measurement grid: dx=15mm, dy=15mm Maximum value of SAR (interpolated) = 0.213 mW/g Channel 0544 Test/Zoom Scan (7x7x7)/Cube 0: Measurement grid: dx=5mm, dy=5mm, dz=5mm Reference Value = 10.9 V/m; Power Drift = -0.139 dB Peak SAR (extrapolated) = 0.306 W/kg SAR(1 g) = 0.202 mW/g; SAR(10 g) = 0.130 mW/g Maximum value of SAR (measured) = 0.222 mW/g 0 dB = 0.222mW/g SAR MEASUREMENT PLOT 4 Ambient Temperature 20.7 Degrees Celsius Liquid Temperature 20.5 Degrees Celsius Humidity 33.0 % This document must not be copied or reproduced, except in full without the written permission of the Manager, EMC Technologies Pty Ltd. The certificate on page 3 may be reproduced in full. www.emctech.com.au

Report No.: M080928 Page 28 of 52 This document must not be copied or reproduced, except in full without the written permission of the Manager, EMC Technologies Pty Ltd. The certificate on page 3 may be reproduced in full. www.emctech.com.au

Report No.: M080928 Page 29 of 52 Test Date: 1 October 2008 File Name: Touch Left 1600 MHz (DAE442 Probe1380) 01-10-08.da4 DUT: Thuraya Satellite Phone; Type: XT; Serial: IMEI:35697802-010029-0 * Communication System: 1640 MHz Satellite; Frequency: 1626 MHz; Duty Cycle: 1:8 * Medium parameters used: f = 1626 MHz; σ = 1.32 mho/m; εr = 39.6; ρ = 1000 kg/m3 - Electronics: DAE3 Sn442; Probe: ET3DV6 - SN1380; ConvF(5.6, 5.6, 5.6) - Phantom: SAM 22; Serial: 1260; Phantom section: Left Section Channel 0001 Test/Area Scan (131x61x1): Measurement grid: dx=15mm, dy=15mm Maximum value of SAR (interpolated) = 0.483 mW/g Channel 0001 Test/Zoom Scan (7x7x7)/Cube 0: Measurement grid: dx=5mm, dy=5mm, dz=5mm Reference Value = 7.71 V/m; Power Drift = -0.191 dB Peak SAR (extrapolated) = 0.601 W/kg SAR(1 g) = 0.424 mW/g; SAR(10 g) = 0.262 mW/g Maximum value of SAR (measured) = 0.479 mW/g 0 dB = 0.479mW/g SAR MEASUREMENT PLOT 5 Ambient Temperature 20.7 Degrees Celsius Liquid Temperature 20.5 Degrees Celsius Humidity 33.0 % This document must not be copied or reproduced, except in full without the written permission of the Manager, EMC Technologies Pty Ltd. The certificate on page 3 may be reproduced in full. www.emctech.com.au

Report No.: M080928 Page 30 of 52 This document must not be copied or reproduced, except in full without the written permission of the Manager, EMC Technologies Pty Ltd. The certificate on page 3 may be reproduced in full. www.emctech.com.au

Report No.: M080928 Page 31 of 52 Test Date: 1 October 2008 File Name: Touch Left 1600 MHz (DAE442 Probe1380) 01-10-08.da4 DUT: Thuraya Satellite Phone; Type: XT; Serial: IMEI:35697802-010029-0 * Communication System: 1640 MHz Satellite; Frequency: 1643 MHz; Duty Cycle: 1:8 * Medium parameters used: f = 1642 MHz; σ = 1.33 mho/m; εr = 39.5; ρ = 1000 kg/m3 - Electronics: DAE3 Sn442; Probe: ET3DV6 - SN1380; ConvF(5.6, 5.6, 5.6) - Phantom: SAM 22; Serial: 1260; Phantom section: Left Section Channel 0544 Test/Area Scan (131x61x1): Measurement grid: dx=15mm, dy=15mm Maximum value of SAR (interpolated) = 0.534 mW/g Channel 0544 Test/Zoom Scan (7x7x7)/Cube 0: Measurement grid: dx=5mm, dy=5mm, dz=5mm Reference Value = 8.63 V/m; Power Drift = -0.204 dB Peak SAR (extrapolated) = 0.674 W/kg SAR(1 g) = 0.457 mW/g; SAR(10 g) = 0.288 mW/g Maximum value of SAR (measured) = 0.503 mW/g 0 dB = 0.503mW/g SAR MEASUREMENT PLOT 6 Ambient Temperature 20.7 Degrees Celsius Liquid Temperature 20.5 Degrees Celsius Humidity 33.0 % This document must not be copied or reproduced, except in full without the written permission of the Manager, EMC Technologies Pty Ltd. The certificate on page 3 may be reproduced in full. www.emctech.com.au

Report No.: M080928 Page 32 of 52 This document must not be copied or reproduced, except in full without the written permission of the Manager, EMC Technologies Pty Ltd. The certificate on page 3 may be reproduced in full. www.emctech.com.au

Report No.: M080928 Page 33 of 52 Test Date: 1 October 2008 File Name: Touch Left 1600 MHz (DAE442 Probe1380) 01-10-08.da4 DUT: Thuraya Satellite Phone; Type: XT; Serial: IMEI:35697802-010029-0 * Communication System: 1640 MHz Satellite; Frequency: 1660 MHz; Duty Cycle: 1:8 * Medium parameters used: f = 1660 MHz; σ = 1.34 mho/m; εr = 39.5; ρ = 1000 kg/m3 - Electronics: DAE3 Sn442; Probe: ET3DV6 - SN1380; ConvF(5.6, 5.6, 5.6) - Phantom: SAM 22; Serial: 1260; Phantom section: Left Section Channel 1087 Test/Area Scan (131x61x1): Measurement grid: dx=15mm, dy=15mm Maximum value of SAR (interpolated) = 0.538 mW/g Channel 1087 Test/Zoom Scan (7x7x7)/Cube 0: Measurement grid: dx=5mm, dy=5mm, dz=5mm Reference Value = 7.48 V/m; Power Drift = -0.076 dB Peak SAR (extrapolated) = 0.594 W/kg SAR(1 g) = 0.456 mW/g; SAR(10 g) = 0.291 mW/g Maximum value of SAR (measured) = 0.499 mW/g 0 dB = 0.499mW/g SAR MEASUREMENT PLOT 7 Ambient Temperature 20.7 Degrees Celsius Liquid Temperature 20.5 Degrees Celsius Humidity 33.0 % This document must not be copied or reproduced, except in full without the written permission of the Manager, EMC Technologies Pty Ltd. The certificate on page 3 may be reproduced in full. www.emctech.com.au

Report No.: M080928 Page 34 of 52 This document must not be copied or reproduced, except in full without the written permission of the Manager, EMC Technologies Pty Ltd. The certificate on page 3 may be reproduced in full. www.emctech.com.au

Report No.: M080928 Page 35 of 52 Test Date: 1 October 2008 File Name: Touch Left Extended Antenna 1600 MHz (DAE442 Probe1380) 01-10-08.da4 DUT: Thuraya Satellite Phone; Type: XT; Serial: IMEI:35697802-010029-0 * Communication System: 1640 MHz Satellite; Frequency: 1643 MHz; Duty Cycle: 1:8 * Medium parameters used: f = 1642 MHz; σ = 1.33 mho/m; εr = 39.5; ρ = 1000 kg/m3 - Electronics: DAE3 Sn442; Probe: ET3DV6 - SN1380; ConvF(5.6, 5.6, 5.6) - Phantom: SAM 22; Serial: 1260; Phantom section: Left Section Channel 0544 Test/Area Scan (171x61x1): Measurement grid: dx=15mm, dy=15mm Maximum value of SAR (interpolated) = 0.099 mW/g Channel 0544 Test/Zoom Scan (7x7x7)/Cube 0: Measurement grid: dx=5mm, dy=5mm, dz=5mm Reference Value = 8.77 V/m; Power Drift = -0.086 dB Peak SAR (extrapolated) = 0.140 W/kg SAR(1 g) = 0.092 mW/g; SAR(10 g) = 0.062 mW/g Maximum value of SAR (measured) = 0.101 mW/g 0 dB = 0.101mW/g SAR MEASUREMENT PLOT 8 Ambient Temperature 20.7 Degrees Celsius Liquid Temperature 20.5 Degrees Celsius Humidity 33.0 % This document must not be copied or reproduced, except in full without the written permission of the Manager, EMC Technologies Pty Ltd. The certificate on page 3 may be reproduced in full. www.emctech.com.au

Report No.: M080928 Page 36 of 52 This document must not be copied or reproduced, except in full without the written permission of the Manager, EMC Technologies Pty Ltd. The certificate on page 3 may be reproduced in full. www.emctech.com.au

Report No.: M080928 Page 37 of 52 Test Date: 1 October 2008 File Name: Tilted Left 1600 MHz (DAE442 Probe1380) 01-10-08.da4 DUT: Thuraya Satellite Phone; Type: XT; Serial: IMEI:35697802-010029-0 * Communication System: 1640 MHz Satellite; Frequency: 1643 MHz; Duty Cycle: 1:8 * Medium parameters used: f = 1642 MHz; σ = 1.33 mho/m; εr = 39.5; ρ = 1000 kg/m3 - Electronics: DAE3 Sn442; Probe: ET3DV6 - SN1380; ConvF(5.6, 5.6, 5.6) - Phantom: SAM 22; Serial: 1260; Phantom section: Left Section Channel 0544 Test/Area Scan (131x61x1): Measurement grid: dx=15mm, dy=15mm Maximum value of SAR (interpolated) = 0.503 mW/g Channel 0544 Test/Zoom Scan (7x7x7)/Cube 0: Measurement grid: dx=5mm, dy=5mm, dz=5mm Reference Value = 10.8 V/m; Power Drift = -0.228 dB Peak SAR (extrapolated) = 0.592 W/kg SAR(1 g) = 0.411 mW/g; SAR(10 g) = 0.257 mW/g Maximum value of SAR (measured) = 0.452 mW/g 0 dB = 0.452mW/g SAR MEASUREMENT PLOT 9 Ambient Temperature 20.7 Degrees Celsius Liquid Temperature 20.5 Degrees Celsius Humidity 33.0 % This document must not be copied or reproduced, except in full without the written permission of the Manager, EMC Technologies Pty Ltd. The certificate on page 3 may be reproduced in full. www.emctech.com.au

Report No.: M080928 Page 38 of 52 This document must not be copied or reproduced, except in full without the written permission of the Manager, EMC Technologies Pty Ltd. The certificate on page 3 may be reproduced in full. www.emctech.com.au

Report No.: M080928 Page 39 of 52 Test Date: 1 October 2008 File Name: Tilted Left Extended Antenna 1600 MHz (DAE442 Probe1380) 01-10-08.da4 DUT: Thuraya Satellite Phone; Type: XT; Serial: IMEI:35697802-010029-0 * Communication System: 1640 MHz Satellite; Frequency: 1643 MHz; Duty Cycle: 1:8 * Medium parameters used: f = 1642 MHz; σ = 1.33 mho/m; εr = 39.5; ρ = 1000 kg/m3 - Electronics: DAE3 Sn442; Probe: ET3DV6 - SN1380; ConvF(5.6, 5.6, 5.6) - Phantom: SAM 22; Serial: 1260; Phantom section: Left Section Channel 0544 Test/Area Scan (171x61x1): Measurement grid: dx=15mm, dy=15mm Maximum value of SAR (interpolated) = 0.472 mW/g Channel 0544 Test/Zoom Scan (7x7x7)/Cube 0: Measurement grid: dx=5mm, dy=5mm, dz=5mm Reference Value = 11.3 V/m; Power Drift = -0.162 dB Peak SAR (extrapolated) = 0.603 W/kg SAR(1 g) = 0.425 mW/g; SAR(10 g) = 0.260 mW/g Maximum value of SAR (measured) = 0.466 mW/g 0 dB = 0.466mW/g SAR MEASUREMENT PLOT 10 Ambient Temperature 20.7 Degrees Celsius Liquid Temperature 20.5 Degrees Celsius Humidity 33.0 % This document must not be copied or reproduced, except in full without the written permission of the Manager, EMC Technologies Pty Ltd. The certificate on page 3 may be reproduced in full. www.emctech.com.au

Report No.: M080928 Page 40 of 52 This document must not be copied or reproduced, except in full without the written permission of the Manager, EMC Technologies Pty Ltd. The certificate on page 3 may be reproduced in full. www.emctech.com.au

Report No.: M080928 Page 41 of 52 Test Date: 1 October 2008 File Name: Validation 1640 MHz (DAE442 Probe1380) 01-10-08.da4 DUT: Dipole 1640 MHz; Type: DV1640V2; Serial: 314 * Communication System: CW 1640 MHz; Frequency: 1640 MHz; Duty Cycle: 1:1 * Medium parameters used: f = 1640 MHz; σ = 1.33 mho/m; εr = 39.6; ρ = 1000 kg/m3 - Electronics: DAE3 Sn442; Probe: ET3DV6 - SN1380; ConvF(5.6, 5.6, 5.6) - Phantom: SAM 22; Serial: 1260; Phantom section: Flat Section Channel 1 Test/Area Scan (51x51x1): Measurement grid: dx=15mm, dy=15mm Maximum value of SAR (interpolated) = 9.77 mW/g Channel 1 Test/Zoom Scan (7x7x7)/Cube 0: Measurement grid: dx=5mm, dy=5mm, dz=5mm Reference Value = 87.8 V/m; Power Drift = 0.010 dB Peak SAR (extrapolated) = 12.9 W/kg SAR(1 g) = 7.98 mW/g; SAR(10 g) = 4.41 mW/g Maximum value of SAR (measured) = 8.89 mW/g 0 dB = 8.89mW/g SAR MEASUREMENT PLOT 11 Ambient Temperature 20.7 Degrees Celsius Liquid Temperature 20.5 Degrees Celsius Humidity 33.0 % This document must not be copied or reproduced, except in full without the written permission of the Manager, EMC Technologies Pty Ltd. The certificate on page 3 may be reproduced in full. www.emctech.com.au

Report No.: M080928 Page 42 of 52 This document must not be copied or reproduced, except in full without the written permission of the Manager, EMC Technologies Pty Ltd. The certificate on page 3 may be reproduced in full. www.emctech.com.au

Report No.: M080928 Page 43 of 52 APPENDIX C CALIBRATION DOCUMENTS 1. SN: 1380 Probe Calibration Certificate 2. SN: D1640V2 Dipole Calibration Certificate This document must not be copied or reproduced, except in full without the written permission of the Manager, EMC Technologies Pty Ltd. The certificate on page 3 may be reproduced in full. www.emctech.com.au

Report No.: M080928 Page 44 of 52 This document must not be copied or reproduced, except in full without the written permission of the Manager, EMC Technologies Pty Ltd. The certificate on page 3 may be reproduced in full. www.emctech.com.au

Report No.: M080928 Page 45 of 52 This document must not be copied or reproduced, except in full without the written permission of the Manager, EMC Technologies Pty Ltd. The certificate on page 3 may be reproduced in full. www.emctech.com.au

Report No.: M080928 Page 46 of 52 This document must not be copied or reproduced, except in full without the written permission of the Manager, EMC Technologies Pty Ltd. The certificate on page 3 may be reproduced in full. www.emctech.com.au

Calibration Laboratory of Schweizeiechor Kallorirdianst Schmid & Partner Bervicesulsse iétatonnage Engineering AG Sorvito svizzero ditaratura Zoughausstrasse 43, 8004 Zurich, Suitzarand Suiss Caliration Service Accredted by heSaiesFedentOffc oMatology and Accredtaton Accredtation: SCS 108 The Swiss Acerediation Serviceis one of the signatoris t the EA Moltlateral Agroomantfothe recognitin of calbrtion carifeatos Caitaton dat: Condtionofthe This caltraion cotfcate documents the vaceabily t nationalstandarts, wich reatze theprysical unts ofmeasurements(81. "The measurements and the unceraintes wih conidence probabily ae gven on tfolowing pages and ar part olthe corifcate. Al caltratons have beenconducin n the clased aboratoy facity: ensronmenttemperaire (22 + 2C and humidty < 70%. Caltraton Eauipmentused (WBTE ie o catbrator) Prmay Standarts o# Cal Date (Calbrated by. Coriicato No Scheduled Cattration PovermelerEPM—AA2K cesrasoros ot—0cor (ho.21r—c0r30) doros Power sensor HP 8481A ussraseres o%.oo.or io. 217—c0r20) cercs Reference 20 48 Atensaler sn sooe 209 or—Ju—0e tio.2rr—00004) weoo Type—N mismatch combinaton n: 6062708827 Otclt08 (No.217.0000n) wros Reterence Probe ES3DV2 sncoors 20.2pe08 (io. es3.3005Ap09) »pe00 onee swcoor 1eer08 (No. Da+001_Marda) Marce Secondary Standards PB Ohedk Date i house) Scheduled Chedk Pover sensor HP 8481\ meetosastr 18—00402 to housecheck 007) in house chec Octo9 RF gonentornas sim—00 too0s 480009 (n house check Oct07) Inhouse che: Oct09 Notork Anabyzer P srose userssnses s1z0s 180ct01 (nhowechedkOct07) in house chesi: ct0s Nome Functon Sorate Caltrated by: Suace i x Aproved by: Issued: uy 17, 2008 This calbratonconficateshal not b reproduced excestinfilwihout witen epproval of e nboretoy Certfcate No: D1GIOV2.—314_Ju08 Page 1 of6 iaewsa NATA

Calibration F Laboratory of «ty BA Schweizerischer Kallbterdianst Schmid & Partner SB\-%& Servicesutsse oftalonnage Engineering AG Loo We Servirlo svizzero taratura Zoughausstrsse 43, 004 Zorh, Suitzriand 7y hlmis Suiss Calibration Service Acsrutted by the Sviss Federal Offce of Metolagyand Aceredtation Aceredtation No.: SCS 108 The Sules Accredtation Service is one of theaignatoris to the EA Multltoral Agrooment forthe recogntion ofcallration centfeates Glossary: TSL tissue simulating liquid ConvF sensitivity in TSL / NORM xiy,z NA not applicable or not measured Calibration is Performed According to the Following Standards: a) IEEE Std 1528—2003, ‘IEEE Recommended Practice for Determining the Peak Spatial— Averaged Specific Absorption Rate (SAR) in the Human Head from Wireless Communications Devices: Measurement Techniques®, December 2003 b CENELEC EN 50361, ‘Basic standard for the measurement of Specific Absorption Rate related to human exposure to electromagnetic fields from mobile phones (300 MHz — 3 GHz), July 2001 c Federal Communications Commission Office of Engineering & Technology (FCC OET), "Evaluating Compliance with FCC Guidelines for Human Exposure to Radiofrequency Electromagnetic Fields; Additional Information for Evaluating Complianceof Mobile and Portable Devices with FCC Limits for Human Exposure to Rediofrequency Emissions‘, Supplement C (Edition 01—01) to Bulletin 65 Additional Documentation: d) DASY4 System Handbook Methods Applied and Interpretation of Parameters: * Measurement Conditions: Further details are available from the Validation Report at the end of the certificate. All figures stated in the certificate are valid at the frequency indicated. * Antenna Parameters with TSL: The dipole is mounted with the spacer to position its feed point exactly below the center marking of the flat phantom section, with the arms oriented parallel to the body axis. * Feed Point Impedance and Return Loss: These parameters are measured with the dipole positioned under the liquid filed phantom. The impedance stated is transformed from the measurement at the SMA connector to the feed point. The Return Loss ensures low reflected power. No uncertainty required. * Electrical Delay: One—way delay between the SMA connector and the antenna feed point. No uncertainty required. * SAR measured: SAR measured at the stated antenna input power. * SAR normalized: SAR as measured, normalized to an input power of 1 W at the antenna connector. + SAR for nominal TSL parameters: The measured TSL parameters are used to calculate the nominal SAR result. Gertficate No: D1640V2—314_Jut08 Page2 ors

Measurement Conditions DASY system confuration, as faras not iven on page 1. DASY Version pasvs var Extrapolation Advanced Exrapolaton Phantom Modutar Flat Phantom V5.0 Distance Dipole Center — TSL 10mm wih Spacer Area Sean resolution c d = 16 mm ZoomScan Resolution d, dy, dz =5 mm Frequency 1640 WMiizx 1 Mz Head TSL parameters The folowing parameters and calculatons were applied. Temporature Pormitivity Conductiviy Nominal Head TSL parameters 220°0 402 1.31 mhoim Measured Head TSL parameters (@20202)°C 80026 % 1.34 mhoim£6% Head TSL tomporature during test @r2o02)‘c — — SAR result with Head TSL SAR averaged over 1 om(1 g) of Head TSL condion SAR measured 250 mW inout power. 844 mW1 g SAR normalized normalized to 1W 33.mW1 a SAR for nominal Head TSL parameters * normatized to 1W 33.0 mW / g 2 17.0 % (ke2) SAR averaged over 10 om(10 g) of Head TSL conditon SAR measured 250 mW input power 455 mW/a SAR normalized normalized to 1W 182mW/g SAR for nominal Head TL parameters * normalized to 1W 17.0 mW g £16.5 % (ke2) * Correction to nominal TSL parameters according to d},chapter "SAR Sensitvites® Cerificale No: D1040V2—814_Juce Page 3 or6

Appendix Antenna Parameters with Head TSL Impedance, transformed to feed point sarn+3110 Retum Loss —20 08 General Antenna Parameters and Design [Eiectical Delay(one direction) 1231 ns After long term use with 100W radiated power, only a sight warming of e dipale nearthe feadpoint can be measured. The dipole is made of standard semiigd coaxial cable. The center conductorofthe feeding ine is drecty connected to the second arm of the dipele, The antenna is therefore short—crouited for DC—signals. No excessive force must be appled to the dipole arms, because they might bend or the soldered connectons near the feedpoint may be dammaged. Additional EUT Data Manufactured by sreas Manufactured on Mareh 19, 2004 Coricate No: D1640V2—314.uind Page 4 of6

DASY4 Validation Report for Head TSL Date/Time: 16.07.2008 103827 Test Laboratory: SPEAG, Zurich, Switzerland DUT: Dipole 1640 MHz; Type: D1640V2; Serial: D1640V2 — SN314 Communication System: CW—1640; Frequency: 1640 MHz;Duty Cyele: 1:1 Medium: HSL U1O BB; Medium parameters used: £= 1640 MHz; 0 = 1.34 mho/m; e, = 39.3; p = 1000 kg/m‘ Phantom section: Flat Section Measurement Standard: DASY4(High Precision Assessment) DASY4 Configuration: * Prober ESSDV2— SN3025;ConvF6.16, .16, 5.16);Calitrated:28.04,2008 * Sensor—Surfice: 3.4mim (Mechanical Surfice Detecton) * Electronics: DAB4 Sn601; Catibrted: 14032008 * Phantom: Flat Phantom 5.0 fonQ; Type: QDOOOPSOAA;; * Measurement SW DASY4, V4.7 Build 7i PostprocessingSWSEMCAD, V2.8 Build 184 Pin =250 mW; d = 10 mm/Zoom Sean (7x7x7)/Cube 0; Measurement grid: dx=Smm, dy=Smm, dz=—Smm Reference Value= 89.2 V/m; Power Drift = 0.009 dB Peak SAR (extrapolated) = 14.9 Wikg SAR(L g) = 8.44 mWig; SAR(IO g) =4.55 mWig Maximum value of SAR (measured)= 10.1 mW/g dB 0.000 04B= 10.1mWs Coricate No: D1GI0V2.314uo8 Page S o6

Report No.: M080928 Page 52 of 52 This document must not be copied or reproduced, except in full without the written permission of the Manager, EMC Technologies Pty Ltd. The certificate on page 3 may be reproduced in full. www.emctech.com.au


Document Created: 2009-01-13 07:40:11
Document Modified: 2009-01-13 07:40:11
© 2025 FCC.report
This site is not affiliated with or endorsed by the FCC