1652013R-FCC-RF Exposure-AC1200 Wireless Dual Band Gigabit Access Point-EAP225-V

FCC ID: TE7EAP225

RF Exposure Info

Download: PDF
FCCID_3108239

RF Exposure Evaluation Declaration Product Name : AC1200 Wireless Dual Band Gigabit Access Point Model No. : EAP225 FCC ID : TE7EAP225 Applicant : TP-LINK TECHNOLOGIES CO., LTD. Address : Building 24(floors1,3,4,5) and 28(floors1-4) Central Science and Technology Park, Shennan Rd, Nanshan, Shenzhen, China Date of Receipt : May. 06, 2016 Issued Date : Jul. 11, 2016 Report No. : 1652013R-RF-US-P20V01 Report Version : V1.0 The test results relate only to the samples tested. The test results shown in the test report are traceable to the national/international standard through the calibration of the equipment and evaluated measurement uncertainty herein. This report must not be used to claim product endorsement by TAF or any agency of the government. The test report shall not be reproduced without the written approval of QuieTek Corporation.

Report No: 1652013R-RF-US-P20V01 Tes t R e p o r t C e r t i f i c a t i o n Issued Date : Jul. 11, 2016 Report No. : 1652013R-RF-US-P20V01 Product Name : AC1200 Wireless Dual Band Gigabit Access Point Applicant : TP-LINK TECHNOLOGIES CO., LTD. Address : Building 24(floors1,3,4,5) and 28(floors1-4) Central Science and Technology Park, Shennan Rd, Nanshan, Shenzhen, China Manufacturer : TP-LINK TECHNOLOGIES CO., LTD. Address : Building 24(floors1,3,4,5) and 28(floors1-4) Central Science and Technology Park, Shennan Rd, Nanshan, Shenzhen, China Model No. : EAP225 FCC ID : TE7EAP225 Brand Name : TP-LINK EUT Voltage : AC 100-240V, 50/60Hz Applicable Standard : KDB 447498D01V06 FCC Part1.1310(b) Test Result : Complied Performed Location : Quietek Corporation - Suzhou EMC Laboratory No.99 Hongye Rd., Suzhou Industrial Park, Suzhou, 215006, Jiangsu, China TEL: +86-512-6251-5088 / FAX: +86-512-6251-5098 FCC Registration Number: 800392 Documented By : (Adm. Specialist: Kathy Feng) Reviewed By : (Senior Engineer: Frank He ) Approved By : (Engineering Manager : Harry Zhao ) Page: 2 of 9

Report No: 1652013R-RF-US-P20V01 Laboratory Information We, QuieTek Corporation, are an independent EMC and safety consultancy that was established the whole facility in our laboratories. The test facility has been accredited/accepted(audited or listed) by the following related bodies in compliance with ISO 17025, EN 45001 and specified testing scope: Taiwan R.O.C. : BSMI, NCC, TAF USA : FCC Japan : VCCI China : CNAS The related certificate for our laboratories about the test site and management system can be downloaded from QuieTek Corporation’s Web Site : http://www.quietek.com/english/about/certificates.aspx?bval=5 The address and introduction of QuieTek Corporation’s laboratories can be founded in our Web site : http://www.quietek.com/index_en.aspx If you have any comments, Please don’t hesitate to contact us. Our contact information is as below: HsinChu Testing Laboratory : No.75-2, 3rd Lin, Wangye Keng, Yonghxing Tsuen, Qionglin Shiang, Hsinchu County 307, Taiwan, R.O.C. TEL:+886-3-592-8858 / FAX:+886-3-592-8859 E-Mail : service@quietek.com LinKou Testing Laboratory : No.5-22, Ruishukeng, Linkou Dist., New Taipei City 24451, Taiwan, R.O.C. TEL : 886-2-8601-3788 / FAX : 886-2-8601-3789 E-Mail : service@quietek.com Suzhou Testing Laboratory : No.99 Hongye Rd., Suzhou Industrial Park, Suzhou, 215006, Jiangsu, China TEL : +86-512-6251-5088 / FAX : 86-512-6251-5098 E-Mail : service@quietek.com Page: 3 of 9

Report No: 1652013R-RF-US-P20V01 History of This Test Report REPORT NO. VERSION DESCRIPTION ISSUED DATE 1652013R-RF-US-P20V01 V1.0 Initial Issued Report Jul.11, 2016 Page: 4 of 9

Report No: 1652013R-RF-US-P20V01 1. RF Exposure Evaluation 1.1. Limits According to FCC 1.1310: The criteria listed in the following table shall be used to evaluate the environment impact of human exposure to radio frequency (RF) radiation as specified in 1.1307(b) LIMITS FOR MAXIMUM PERMISSIBLE EXPOSURE (MPE) Electric Magnetic Power Average Frequency Field Field Density Time Range (MHz) Strength Strength (mW/cm2) (Minutes) (V/m) (A/m) (A) Limits for Occupational/ Control Exposures 300-1500 -- -- F/300 6 1500-100,000 -- -- 5 6 (B) Limits for General Population/ Uncontrolled Exposures 300-1500 -- -- F/1500 6 1500-100,000 -- -- 1 30 F= Frequency in MHz Friis Formula Friis transmission formula: Pd = (Pout*G)/(4*pi*r2) Where Pd = power density in mW/cm2 Pout = output power to antenna in mW G = gain of antenna in linear scale Pi = 3.1416 R = distance between observation point and center of the radiator in cm Pd id the limit of MPE, 1 mW/cm2 . If we know the maximum gain of the antenna and the total power input to the antenna, through the calculation, we will know the distance r where the MPE limit is reached. Page: 5 of 9

Report No: 1652013R-RF-US-P20V01 1.2. Test Procedure Software provided by client enabled the EUT to transmit and receive data at lowest, middle and highest channel individually. The temperature and related humidity: 18℃and 78％ RH. 1.3. Test Result of RF Exposure Evaluation Product : AC1200 Wireless Dual Band Gigabit Access Point Test Item : RF Exposure Evaluation Test Site : AC-6 z Antenna Gain: For 2.4G Model No. N/A Antenna manufacturer TP-LINK Antenna Delivery 1*TX+1*RX 2*TX+2*RX 3*TX+3*RX Antenna technology SISO Basic CDD MIMO Sectorized Beam-forming Antenna Type Dipole External Sectorized PIFA PCB Internal Ceramic Chip Antenna Metal plate type F antenna Directional Gain Ant Gain Antenna Technology (dBi) (dBi) For Power For PSD CDD Ant0: 4.05 Ant1: 4.25 4.15 7.16 For 5G Page: 6 of 9

Report No: 1652013R-RF-US-P20V01 Antenna Model PIFA Antenna Antenna Manufacturer TPlink Antenna Delivery 1*TX+1*RX 2*TX+2*RX 3*TX+3*RX Antenna Technology SISO Basic methodology with NANT transmit antennas Sectorized antenna systems Cross-polarized antennas MIMO Unequal antenna gains, with equal transmit powers Spatial Multiplexing Cyclic Delay Diversity (CDD) Antenna Type PIFA Antenna Antenna Gain Directional Gain Antenna Technology Ant Gain For Power For PSD Ant0: 5.12 5.17 8.18 CDD Ant1: 5.22 Page: 7 of 9

Report No: 1652013R-RF-US-P20V01 z Output Power into Antenna & RF Exposure Evaluation Distance: Standlone modes Maximum Output Power Density at Frequency Band Directional Gain Test Mode Power to R = 20 cm (MHz) (dBi) Antenna (dBm) (mW/cm2) 802.11b/g/n(20MHz) 2412 ~ 2472 MHz 28.53 4.15 0.3687 with CDD 802.11n(40MHz) 2422 ~ 2462 MHz 23.85 4.15 0.1255 with CDD 802.11a/n/ac 5180-5240MHz 29.71 5.17 0.6120 (20MHz) with CDD 5745-5825 MHz 802.11n/ac (40MHz) 5190-5230MHz 28.52 5.17 0.4653 with CDD 5755-5795 MHz 802.11ac(80MHz) 5210MHz 24.79 5.17 0.1971 with CDD 5775MHz Page: 8 of 9

Report No: 1652013R-RF-US-P20V01 Simultaneous transmission: Maximum Output Power Density at Frequency Band Directional Gain Power to R = 20 cm (MHz) (dBi) Antenna (dBm) (mW/cm2) 2412 ~ 2472 28.53 4.15 0.3687 5180-5240 29.71 5.17 0.6120 5745-5825 Simultaneous transmission power density 0.9807 So according to transmission formula: Pd = (Pout*G)/(4*pi*r2) and the power density limit according to KDB 447498D01V06 and FCC Part1.1310(b), the limit is 1mW/cm2 Safety Distance Calculation Formula: The power flux: P*G (θ ,φ ) S= 4*π *r 2 So safety distance as following: P *G r= 4*π *S P = input power of the antenna G = antenna gain relative to an isotropic antenna θ, Ф = elevation and azimuth angles. r = distance from the antenna to the point of investigation Maximum Limit of Power Frequency Range Safety Distance EIRP Density (MHz) r(cm) (dBm) S(mW/cm2) 2412 ~ 2472 32.68 1 5180-5240 15.65 34.88 1 5745-5825 Note: The safety distance is 15.65cm for AC1200 Wireless Dual Band Gigabit Access Point without any other radio equipment. The End Page: 9 of 9


Document Created: 2016-07-12 09:18:05
Document Modified: 2016-07-12 09:18:05
© 2024 FCC.report
This site is not affiliated with or endorsed by the FCC