5. Users Manual rev3

FCC ID: TE7CPE210V32

Users Manual

Download: PDF
FCCID_4501080

Installation Guide Outdoor CPE Get Started with Setup Videos Scan the QR code or visit https://www.tp-link.com/support/setup-video/


Contents Overview 01 Hardware Connection 04 Site Consideration 04 Connection and Installation 06 Lightning & ESD Protection 08 6RIWZDUH&RQƮJXUDWLRQ   Logging in to the PharOS 10 7\SLFDO$SSOLFDWLRQ&RQƮJXUDWLRQ   $QWHQQD$OLJQPHQW   6SHFLƮFDWLRQV  FAQ 16

Overview TP-Link's Pharos series outdoor CPEs are dedicated to outdoor wireless QHWZRUNVROXWLRQV7KLVJXLGHLVDSSOLFDEOHWRSURGXFWVLQFOXGLQJ&3( &3(DQG&3( r3DFNDJH&RQWHQWV Pole Mounting Power Cord Straps Installation Guide Outdoor CPE Need setup videos? Scan the QR code or visit https://www.tp-link.com/en/support/setup-video/ Mounting Bracket Pharos CPE Passive PoE 3ODVWLF:DOO$QFKRUV 4W\ Installation Guide Adapter 6HOIWDSSLQJ6FUHZV 4W\ • LED Explanation 7KHIROORZLQJSLFWXUHWDNHV&3(DVDQH[DPSOH AP/AP Router Mode: All four LEDs remain solid. LAN1 LAN0 POWER 2Q$GHYLFHLVFRQQHFWHGWRWKLVSRUWEXWWKHUHLVQRDFWLYLW\ )ODVKLQJ$GHYLFHLVFRQQHFWHGWRWKLVSRUWDQGLVDFWLYH On: The CPE is powered on. 01

• Panel Layout 3KDURV&3( Grounding Shielded Ethernet Shielded Ethernet RESET Terminal Port LAN0 (Passive Port LAN1 PoE IN) 3KDURV&3(&3( Grounding Shielded Ethernet Port RESET Terminal LAN (Passive PoE IN) 

Passive PoE Adapter: 5HPRWH5HVHW Power LED Press and hold for about 8 seconds The Power LED is on when the until CPE’s LEDs of wireless signal passive PoE adapter is working VWUHQJWKDQG/$1ưDVK normally. 03

Application Example The CPE device(CPE210 CPE220 CPE510) provides outdoor network access over long distances for point-to-point applications. 4

Hardware Connection 1. Site Consideration r0RXQWLQJ+HLJKW Ensure a clear line of sight between the wireless devices for an optimum performance. An elevated location is recommended as obstacles like WUHHVEXLOGLQJVDQGODUJHVWHHOVWUXFWXUHVZLOOZHDNHQWKHZLUHOHVVVLJQDO 6HH 4 LQ )$4 IRUGHWDLOVDERXWKRZWRFDOFXODWHWKHPLQLPXPPRXQWLQJ height of the devices. Line of Sight Side View 04

• Orientation Install the CPE devices with the front facing the intended signal receiving GHYLFHV<RXFDQRULHQWWKHGHYLFHVZLWKWKHDVVLVWDQFHRI*RRJOH0DSV GPS and some landmarks according to the horizontal beamwidth listed below. Models &3( &3( &3( Horizontal Beamwidth    shenzhen A t gh Si of ne Li id l w nta th amizo Be or H B 

2. Connection and Installation Connect and mount the CPE and power adapter as shown below. The IROORZLQJLQWURGXFWLRQWDNHV&3(DVDQH[DPSOH r&RQQHFWLQJ&3(DQG3RZHU$GDSWHU &RQQHFWWKH&3(DQGSRZHUDGDSWHUDVVKRZQLQWKHƮJXUHEHORZ LAN0 PoE LAN Ethernet cable length up to 60m You should prepare an adequate Connect to a computer, Ethernet cable to connect the CPE router or switch. and the passive PoE adapter. (Depending on your Shielded CAT5e (or above) cable intended usage and/or with ground wire is recommended network topology.) Slide to replace the cover (refer to the next section). of the CPE when all FRQQHFWLRQVDUHƮQLVKHG 06

r0RXQWLQJ&3( $WWKHVHOHFWHGVLWHDSSUR[LPDWHO\DOLJQWKH&3(WRWKHGLUHFWLRQWKDW\RX have oriented. r0RXQWLQJ3RZHU$GDSWHU 2SWLRQDO Follow the steps below to mount the power adapter: 7RHQVXUHWKHSDVVLYH3R(DGDSWHULVDWWDFKHGPRVWVHFXUHO\LWLV recommended to install the adapter with the Ethernet port facing upward. 1. Drill two holes on the wall and insert the plastic wall anchors into the holes. Secure the mounting bracket to the wall. Make sure the shoulders at the corners of the mounting bracket are on the outside and pointing upward.  Attach the passive PoE adapter to the mounting bracket by sliding the adapter in the direction of the arrows until it locks into place. 07

3. Lightning & ESD Protection 3URSHUJURXQGLQJLVH[WUHPHO\LPSRUWDQWIRURXWGRRUGHYLFHV %\ XVLQJ VKLHOGHG &$7H RU DERYH  FDEOH ZLWK JURXQG ZLUH IRU WKH connection and the provided PoE adapter (method 1 \RXFDQHƬHFWLYHO\ HOLPLQDWH (6' DWWDFNV ,I \RX XVH WKH JHQHUDO &$7H FDEOH IRU WKH FRQQHFWLRQWKHQLWLVQHFHVVDU\WRFRQQHFWWKHJURXQGLQJWHUPLQDORIWKH CPE to earth ground through grounding cable (method   7KHIROORZLQJLQWURGXFWLRQWDNHV&3(DVDQH[DPSOH Two Methods: CPE 1 Shielded CAT5e (or above) Cable with Ground Wire 2 Grounding Terminal and Cable Grounding Terminal Grounding Cable Grounded 3-wire Power Outlet Shielded CAT5e (or above) Cable with Ground Wire 1 1 2 1 PoE Adapter with Earth Ground Earth Ground 08

Sheath Twisted Pair Ground Wire Cable Shield Secondary Cable Shield Shielded RJ45 Connector 6KLHOGHG&$7H RUDERYH &DEOHZLWK*URXQG:LUH 09

6RIWZDUH&RQƮJXUDWLRQ This chapter introduces the login to the PharOS Web Interface and the VRIWZDUHFRQƮJXUDWLRQV 1. Logging in to the PharOS 1. %HIRUH DFFHVVLQJ WKH 3KDU26 :HE ,QWHUIDFH \RX QHHG WR DVVLJQ DVWDWLF,3DGGUHVV; ;UDQJHVEHWZHHQDQGHJ  WR\RXUFRPSXWHU  2SHQDZHEEURZVHUW\SHKWWSLQWRWKHDGGUHVVƮHOG and press Enter :LQGRZV RUreturn 0DF ,WLVUHFRPPHQGHGWRXVH WKHODWHVWYHUVLRQRI*RRJOH&KURPH)LUHIR[RU6DIDUL 10

3. Enter DGPLQ for both 8VHU1DPH and Password. Read and agree the WHUPVRIXVHWKHQFOLFN/RJLQ. 4. Change the default User Name and Password to protect your CPE. /HWoVVWDUWFRQƮJXULQJWKH&3( )RUVXEVHTXHQWORJLQVXVHWKHQHZXVHUQDPHDQGSDVVZRUG )RUPRUHFRQƮJXUDWLRQVSOHDVHYLVLWKWWSVZZZWSOLQNFRPVXSSRUWWR download the User Guide of Pharos products in the download center. 11

2. 7\SLFDO$SSOLFDWLRQ&RQƮJXUDWLRQ The typical topology is as follows. A wireless bridge is built between two locations that are far from each other. Follow the instructions below to FRQƮJXUHWKH$FFHVV3RLQWDQG&OLHQW IP Camera Computer Access Point Client LAN: 192.168.0.254 LAN: 192.168.0.2 &RQƮJXUHWKH$FFHVV3RLQW $3 1. Log in to PharOS and go to the Quick Setup page.  Operation Mode: Select Access Point and click Next. 3. LAN Settings: Click Next. 4. Wireless AP Settings: D&UHDWHDQHZ66,' 1HWZRUNQDPH IRU\RXUZLUHOHVVQHWZRUN b. Select WPA-PSK/WPA2-PSK for the Security method and create a PSK Password to protect your AP. c. Enter the distance between the Access Point and the Client into WKH'LVWDQFH6HWWLQJƮHOG d. Select the 0$;WUHDPFKHFNER[ 5HIHUWR4LQ)$4IRUGHWDLOV DERXW0$;WUHDP DQGFOLFNNext.  Finish: Verify your settings and click Finish to complete the FRQƮJXUDWLRQ &RQƮJXUHWKH&OLHQW 1. Log in to PharOS and go to the Quick Setup page.  Operation Mode: Select Client and click Next. 

3. /$1 6HWWLQJV &KDQJH WKH ,3 $GGUHVV WR ; ; UDQJHV EHWZHHQDQG WKHVDPHVXEQHWZLWKWKH$FFHVV3RLQWDQG click Next. 4. Wireless Client Settings: a. Click SurveyDQGVHOHFWWKH66,'RIWKH$FFHVV3RLQWLQWKH$3OLVW then click Connect. b. Select WPA-PSK/WPA2-PSKIURPWKH6HFXULW\RSWLRQHQWHUWKH VDPH36.SDVVZRUGDQGGLVWDQFHYDOXHRIWKH$FFHVV3RLQWWKHQ click Next.  Finish: Verify your settings and click Finish to complete the FRQƮJXUDWLRQ )RUPRUHFRQƮJXUDWLRQVSOHDVHYLVLWKWWSVZZZWSOLQNFRPVXSSRUWWR download the User Guide of Pharos products in the download center. 13

Antenna Alignment Antenna alignment can help you to optimize the antenna signal. To get the EHVWZLUHOHVVSHUIRUPDQFHFOLFN$QWHQQD$OLJQPHQWIURPWKHGURSGRZQ list on the upper-right corner and enable Alignment Beep during align- ment. Then adjust your antenna until the sound frequency turns to the lowest. &KHFNWKHER[WRHQDEOHWKHEHHSVRXQG,WVIUHTXHQF\ can help you to estimate the signal strength received by WKHDQWHQQD7KHORZHUWKHVRXQGIUHTXHQF\WKHVWURQJHU the signal strength. WISP WISP 14

6SHFLƮFDWLRQV HARDWARE FEATURES Models &3(&3( &3( 'LPHQVLRQV   PP   PP LAN: 10/100 Mbps LAN0: 10/100 Mbps (WKHUQHW3RUW 3R(,1 (WKHUQHW3RUW 3R(,1 LAN1: 10/100 Mbps Interface Ethernet Port GND: Grounding Terminal for Lightning Protection RESET: Button to restore the device to Factory Default Passive PoE Adapter Included Power Supply &3(9'&$ &3(&3(9'&$ ESD Protection1 N9 1 /LJKWQLQJ3URWHFWLRQ Up to 6 kV 2SHUDWLQJ -40 ˫to 70 ˫ (-40 ˭ WR˭ 7HPSHUDWXUH 2SHUDWLQJ+XPLGLW\ 10% to 90% &HUWLƮFDWLRQ &()&&5R+6,3; WIRELESS FEATURES Models &3( &3( &3( Antenna Gain 9 dBi G%L 13 dBi Horizontal %HDPZLGWK(OHYDWLRQ    %HDPZLGWK2 802.11 Standards 11b/g/n 11b/g/n 11a/n Note: (VWLPDWLRQLVEDVHGRQFRSSHUJURXQGLQJFDEOHDQGVKLHOGHG&$7HFDEOH with ground wire. %HDPZLGWKYDOXHVPD\YDU\WKURXJKRXWRSHUDWLQJIUHTXHQF\ 

FAQ Q1. How to restore the CPE to its factory default VHWWLQJV" :LWKWKH&3(SRZHUHGRQ\RXFDQUHVHWWKH&3(YLDHLWKHUWKH RESET button on the CPE or the Remote Reset button on the Passive PoE Adapter. Method 1: Via the RESET Button on the CPE 7KHIROORZLQJSLFWXUHWDNHV&3(DVDQH[DPSOH RESET Button Press and hold for about 8 seconds until CPE’s LEDs of wireless signal VWUHQJWKDQG/$1ưDVK 0HWKRG9LDWKH5HPRWH5HVHW%XWWRQRQWKH3DVVLYH3R( Adapter 5HPRWH5HVHW%XWWRQ Press and hold for about 8 seconds until CPE’s /('VRIZLUHOHVVVLJQDOVWUHQJWKDQG/$1ưDVK 16

4+RZWRFDOFXODWHWKHPLQLPXPPRXQWLQJKHLJKW RIWKHGHYLFHV" ,QRUGHUWRPD[LPL]HWKHUHFHLYHGVLJQDOVWUHQJWKRIWKHGHYLFHV LQVWDOOHUVQHHGWRPLQLPL]HWKHHIIHFWRIWKHRXWRISKDVHVLJQDOV which is caused by obstacles in the path between the transmitter and the receiver. Fresnel Zone is a usual method to calculate this SDWKDVVKRZQLQWKHIRUPXODDQGWKHƮJXUHEHORZ d2 d1 r H h+r*(1 40%) h = the height of obstacle at this point (H is the height of the CPE) ZKHUH r = Fresnel zone radius in meters F [8PVVSHHGRIOLJKW f = operating frequency of the devices in Hz d1 & d = the distances between the point and the devices in meters )RUH[DPSOHDVVXPHd1LVNPd2LVNPDQGfLV*+]WKHQ rZRXOGEHP&RQVLGHULQJDWROHUDWLRQRIDOORZDEOH UDGLXVZRXOGEHP$VVXPHhLVPWKHQWKHUHVXOWRIWKH PLQLPXPPRXQWLQJKHLJKWEDVHGRQWKLVSRLQWZRXOGEHP 6LPLODUO\FDOFXODWHWKHUHVXOWVEDVHGRQDOOWKHSRLQWVZKHUHWKHUHDUH REVWDFOHVDQGWKHPD[LPXPYDOXHZRXOGEHWKHƮQDOUHVXOW )RUPRUHLQIRUPDWLRQSOHDVHUHIHUWR https://en.wikipedia.org/wiki/Fresnel_zone 17

Q3. What is Pharos MAXtream? 3KDURV0$;WUHDPLVDSURSULHWDU\SURWRFROGHYHORSHGRQWKHEDVLV RI7LPH'LYLVLRQ0XOWLSOH$FFHVV 7'0$ E\73/LQN 7KH0$;WUHDPWHFKQRORJ\KDVWKHIROORZLQJDGYDQWDJHV • (OLPLQDWHVKLGGHQQRGHFROOLVLRQVDQGLPSURYHVFKDQQHOHƱFLHQF\ • /RZHUODWHQF\KLJKHUWKURXJKSXWODUJHUQHWZRUNFDSDFLW\DQG more stability. • ,PSURYHVWKH4R6IRUYLGHRYRLFHDQGVRXQGGDWDVWUHDP %\ GLYLGLQJ WKH WLPLQJ RI WUDQVPLVVLRQ LQWR GLIIHUHQW WLPH VORWV 0$;WUHDPDOORZVWKH3KDURVGHYLFHVWRWUDQVPLWLQUDSLGVXFFHVVLRQ RQH DIWHU DQRWKHU HDFK XVLQJ LWV RZQ WLPH VORW WR WUDQVPLW DQG UHFHLYH WKHLU RZQ IUDPHV ZKLFK JUHDWO\ UHGXFHV WKH FKDQFH RI collision. 3KDURV 0$;WUHDP LV D QRQVWDQGDUG :L)L SURWRFRO WKDW LV RQO\ compatible with TP-Link’s Pharos series products. Please notice that you will not be able to connect other Wi-Fi devices to an AP with 0$;WUHDPHQDEOHG 4+RZFDQ,XVH6SHFWUXP$QDO\VLVWRƮQGWKH appropriate channel for the devices? 1. /RJLQWR3KDU26FOLFN6SHFWUXP$QDO\VLV in the tools drop-down OLVWDZLQGRZZLOOSRSXSWRUHPLQG\RXWKDWDOOZLUHOHVVFRQQHFWLRQV will be lost during spectrum analysis. Click Yes to continue to the Spectrum Analysis page. Click StartWKH3KDURVZLOOEHJLQWRDQDO\]HWKHSRZHURIIUHTXHQF\ 2EVHUYHWKHFXUYHVIRUDSHULRGRIWLPHDQGWKHQFOLFNStop. Note that the relatively low and continuous part of the average curve 18

LQGLFDWHV OHVV UDGLR QRLVH +HUH ZH XVH WKH ILJXUH EHORZ DV DQ H[DPSOH 7KHVHOHFWER[RI)UHTXHQF\5DQJHDWWKHWRSOHIWFRUQHULVRQO\ DYDLODEOHIRU&3(6HOHFWWKHGHVLUHGUDQJHDQGWKHQFOLFN6WDUW :KHQFKRRVLQJFKDQQHOIUHTXHQF\\RXVKRXOGDYRLGWKHVSHFWUXP ZLWKODUJHUDGLRQRLVH,QWKLVH[DPSOHWKHUHFRPPHQGHGFKDQQHO IUHTXHQF\LV0+] 1RWH7RDVNTXHVWLRQVƮQGDQVZHUVDQGFRPPXQLFDWHZLWK73/LQNXVHUV RUHQJLQHHUVSOHDVHYLVLWKWWSVFRPPXQLW\WSOLQNFRPWRMRLQ73/LQN Community. 19

Safety Information • .HHSWKHGHYLFHDZD\IURPZDWHUƮUHKXPLGLW\RUKRWHQYLURQPHQWV • 'RQRWDWWHPSWWRGLVDVVHPEOHUHSDLURUPRGLI\WKHGHYLFH • Do not use damaged charger or USB cable to charge the device. • Do not use any other chargers than those recommended • Do not use the device where wireless devices are not allowed. • Adapter shall be installed near the equipment and shall be easily accessible. Use only power supplies which are provided by manufacturer and in the original SDFNLQJRIWKLVSURGXFW,I\RXKDYHDQ\TXHVWLRQVSOHDVHGRQ WKHVLWDWHWRFRQWDFWXV Please read and follow the above safety information when operating the device. We cannot guarantee that no accidents or damage will occur due to improper use of the device. Please use this product with care and operate at your own risk. цѧѥћѪѡѩѨќѧѩџѫѽѡѥљїѤѥўњѽћѤѥѨѦѧїљџѢїѣџѨџѨѩќѣџъѡѧшмцчхѤїљѽћѦѥљѽћѤѽѨѩѳ љџѣѥњїѣ ѤѥѧѣїѩџљѤџѬ ћѥѡѪѣќѤѩѽљ ѩї љџѣѥњїѣ Ѱѥ ѦќѧќћјїѮќѤѽ ѮџѤѤџѣџ ўїѡѥѤѥћїљѮџѣџїѡѩїѣџъѡѧїѾѤџ

FCC compliance information statement Product Name: Outdoor CPE Model Number: CPE220/CPE510 Component Name Model I.T.E. Power Supply TL-POE2412G Responsible party: TP-Link USA Corporation, d/b/a TP-Link North America,Inc. Address: 145 South State College Blvd. Suite 400, Brea, CA 92821 Website: https://www.tp-link.com/us/ Tel: +1 626 333 0234 Fax: +1 909 527 6803 E-mail: sales.usa@tp-link.com This equipment has been tested and found to comply with the limits for a Class A digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference when the equipment is operated in a commercial environment. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instruction manual, may cause harmful interference to radio communications. Operation of this equipment in a residential area is likely to cause harmful interference in which case the user will be required to correct the interference at his own expense. This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: 1) This device may not cause harmful interference. 2) This device must accept any interference received, including interference that may cause undesired operation. Any changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment. Note: The manufacturer is not responsible for any radio or TV interference caused by XQDXWKRUL]HGPRGLƮFDWLRQVWRWKLVHTXLSPHQW6XFKPRGLƮFDWLRQVFRXOGYRLGWKHXVHUoV authority to operate the equipment. Product Name: Outdoor CPE Model Number: CPE 210 Component Name Model I.T.E. Power Supply TL-POE2412G Responsible party: TP-Link USA Corporation, d/b/a TP-Link North America,Inc. Address: 145 South State College Blvd. Suite 400, Brea, CA 92821 Website: https://www.tp-link.com/us/ Tel: +1 626 333 0234 Fax: +1 909 527 6803

E-mail: sales.usa@tp-link.com This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or WHOHYLVLRQUHFHSWLRQZKLFKFDQEHGHWHUPLQHGE\WXUQLQJWKHHTXLSPHQWRƬDQGRQWKH user is encouraged to try to correct the interference by one or more of the following measures: • Reorient or relocate the receiving antenna. • Increase the separation between the equipment and receiver. • Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. • Consult the dealer or an experienced radio/ TV technician for help. This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: 1) This device may not cause harmful interference. 2) This device must accept any interference received, including interference that may cause undesired operation. Any changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment. Note: The manufacturer is not responsible for any radio or TV interference caused by XQDXWKRUL]HGPRGLƮFDWLRQVWRWKLVHTXLSPHQW6XFKPRGLƮFDWLRQVFRXOGYRLGWKHXVHUoV authority to operate the equipment. FCC RF Radiation Exposure Statement: This equipment complies with FCC RF radiation exposure limits set forth for an uncontrolled environment. This device and its antenna must not be co-located or operating in conjunction with any other antenna or transmitter. “To comply with FCC RF exposure compliance requirements, this grant is applicable to RQO\0RELOH&RQƮJXUDWLRQV7KHDQWHQQDVXVHGIRUWKLVWUDQVPLWWHUPXVWEHLQVWDOOHGWR provide a separation distance of at least 25 cm from all persons and must not be co- located or operating in conjunction with any other antenna or transmitter.” FCC compliance information statement Product Name: I.T.E. Power Supply Model Number: TL-POE2412G Responsible party: TP-Link USA Corporation, d/b/a TP-Link North America, Inc. Address: 145 South State College Blvd. Suite 400, Brea, CA 92821 Website: https://www.tp-link.com/us/ Tel: +1 626 333 0234

Fax: +1 909 527 6803 E-mail: sales.usa@tp-link.com This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or WHOHYLVLRQUHFHSWLRQZKLFKFDQEHGHWHUPLQHGE\WXUQLQJWKHHTXLSPHQWRƬDQGRQWKH user is encouraged to try to correct the interference by one or more of the following measures: • Reorient or relocate the receiving antenna. • Increase the separation between the equipment and receiver. • Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. • Consult the dealer or an experienced radio/ TV technician for help. This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: 1) This device may not cause harmful interference. 2) This device must accept any interference received, including interference that may cause undesired operation. Any changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment. We, TP-Link USA Corporation, has determined that the equipment shown as above has been shown to comply with the applicable technical standards, FCC part 15. There is no unauthorized change is made in the equipment and the equipment is properly maintained and operated. Issue Date: 2019.07.25

CE Mark Warning For CPE220/CPE510: This is a Class A product. In a domestic environment, this product may cause radio interference, in which case the user may be required to take adequate measures. For CPE210: This is a Class B product. In a domestic environment, this product may cause radio interference, in which case the user may be required to take adequate measures. OPERATING FREQUENCY(the maximum transmitted power) 2412MHz—2472MHz(20dBm) (CPE210/CPE220) 5500MHz—5700MHz(30dBm) (CPE510) EU declaration of conformity TP-Link hereby declares that the device is in compliance with the essential requirements and other relevant provisions of directives 2014/53/EU, 2009/125/EC, 2011/65/EU and (EU)2015/863. The original EU declaration of conformity may be found at https://www.tp-link.com/en/ce RF Exposure Information This device meets the EU requirements (2014/53/EU Article 3.1a) on the limitation of H[SRVXUHRIWKHJHQHUDOSXEOLFWRHOHFWURPDJQHWLFƮHOGVE\ZD\RIKHDOWKSURWHFWLRQ 7KHGHYLFHFRPSOLHVZLWK5)VSHFLƮFDWLRQVZKHQWKHGHYLFHXVHGDWFPIURP\RXU body. Canadian Compliance Statement This device contains licence-exempt transmitter(s)/receiver(s) that comply with Innovation, Science and Economic Development Canada’s licence-exempt RSS(s). Operation is subject to the following two conditions: 1) This device may not cause interference. 2) This device must accept any interference, including interference that may cause undesired operation of the device. L’émetteur/récepteur exempt de licence contenu dans le présent appareil est conforme aux CNR d’Innovation, Sciences et Développement économique Canada applicables aux appareils radio exempts de licence. L’exploitation est autorisée aux deux conditions suivantes :

1) L’appareil ne doit pas produire de brouillage; 2) L’appareil doit accepter tout brouillage radioélectrique subi, même si le brouillage est susceptible d’en compromettre le fonctionnement. Caution: (For CPE510) The device for operation in the band 5150–5250 MHz is only for indoor use to reduce the potential for harmful interference to co-channel mobile satellite systems; Avertissement: (For CPE510) Le dispositif fonctionnant dans la bande 5150-5250 MHz est réservé uniquement pour une utilisation à l’intérieur afin de réduire les risques de brouillage préjudiciable aux systèmes de satellites mobiles utilisant les mêmes canaux; Radiation Exposure Statement: This equipment complies with IC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with minimum distance 20cm between the radiator & your body. Déclaration d'exposition aux radiations: Cet équipement est conforme aux limites d'exposition aux rayonnements IC établies pour un environnement non contrôlé. Cet équipement doit être installé et utilisé avec un minimum de 20 cm de distance entre la source de rayonnement et votre corps. Industry Canada Statement (For CPE220/CPE510) CAN ICES-3 (A)/NMB-3(A) Industry Canada Statement (For CPE210) CAN ICES-3 (B)/NMB-3(B) Korea Warning Statements ୭ቘഇวษණୈཾཻါ࿪ᇦኃນয୏ะྺ࿄ྫ (For CPE220/CPE510) ֿ‫ך‬鄳縨‫כ‬ծ‫"أؙٓ‬䞔㜡䪮遮鄳縨‫ׅד‬կֿ‫ך‬鄳縨‫׾‬㹻䏭橇㞯‫ד‬⢪欽‫ה׷ׅ‬ꨵ岚㧎㹲‫׾‬ 䒸ֹ饰ֿ‫ׅת׶ָ֮הֿׅ‬կֿ‫ך‬㜥ざ‫כח‬⢪欽罏ָ黟ⴗ‫ז‬㼏瘻‫׾‬闍‫ֲ״׷׆‬銳宠ׁ‫׸‬ ‫ׅת׶ָ֮הֿ׷‬կ 7$$*"

NCC Notice & BSMI Notice 岤䠑 ⣜亘⡛⸆桧ꨵ岚鱖㼘䚍ꨵ堤盗椚鳵岁 痦⼧✳哬竤㘗䒭钡阮ざ呔⛓⡛⸆桧㼘걽ꨵ堤ꬋ竤鏪〳Ⱆ぀ծ㉁贪䧴⢪欽罏㖲♶䖤乲 荈隶刿걽桧ծ⸈㣐⸆桧䧴隶刿⾲鏤鎙⛓暵䚍䧴⸆腊կ 痦⼧㔋哬⡛⸆桧㼘걽ꨵ堤⛓⢪欽♶䖤䕧갠굳菔㸝Ⰼ⿺䎁仟ざ岁鸑遤竤涮植剣䎁仟植韌 儗䥰用⽰⨢欽⚛佖㊤荛搁䎁仟儗倰䖤糒糵⢪欽կ⵸갪ざ岁鸑⥌䭷⣜ꨵ⥌鋊㹁⡲噟 ⛓搁箁ꨵ⥌կ⡛⸆桧㼘걽ꨵ堤꨽䗽「ざ岁鸑⥌䧴䊨噟ծ猰㷸⟄⿺ꄳ派欽ꨵ岚鱖㼘䚍ꨵ堤 鏤⪓⛓䎁仟կ For CPE510 䥰鼙⯝䕧갠꣡鵛ꨭ麧禹窠⛓乼⡲կ 넞㟞渤䭷ぢ䚍㣔箁〫䖤䥰欽倴㔿㹁䒭럊㼩럊禹窠կ 㸝Ⰼ镩鑉⿺岤䠑✲갪 ˖ 锝⢪欽⾲酤ꨵ彂⣘䥰㐼䧴〫腊䭽撑劥欴ㅷ岤僈涸ꨵ彂㘗⢪欽劥欴ㅷկ ˖ 幡悥劥欴ㅷ⛓⵸锝⯓䬬䱈ꨵ彂箁կ锝⺡⢪欽巊넒ծ㑑ꪒ幡悥ⷭ䧴憈䋒鹍遤幡悥կ ˖ 岤䠑꣈惐锝⺡㼞宐䧴Ⱖ➭巊넒悝扴ⵌ劥欴ㅷ♳կ ˖ 䳃坵莄Ꟛ〡⣘鸑괏⢪欽⟄焷⥂劥欴ㅷ涸乼⡲〳ꬑ⚛꣈姺麔攧锝⺡㜧㝱䧴銻覇Ꟛ〡կ ˖ 锝⺡㼞劥欴ㅷ縨佞倴ꬑ鵛攧彂涸㖑倰կꤑꬋ剣姻䌢涸鸑괏や⵱♶〳佞㖈㺙ꟗ⡙縨⚥կ ˖ 锝♶銳猙荈䩧Ꟛ堤媽♶銳㎱鑑荈遤笞⥝劥欴ㅷ锝歋䱇奙涸㼠噟➃㡦鹍遤姼갪䊨⡲կ (For CPE220/CPE510) 姼捀歌顺鎝䪮遮鏤⪓✵㾀⡞橇㞯⚥⢪欽儗〳腊剚鸣䧭㼘걽 仟⹛㖈姼珏䞔屣♴⢪欽罏剚鄄銳宠䱰》厤❈黟殹涸㼩瘻 ꣳ欽暟颶ゎ剣䞔屣垥爙耪僈剅 ꣳ欽暟颶⿺Ⱖ⻊㷸痗贪 欴ㅷ⯋⟝ぜ珖 ꊋ ꓸ 寏 Ⱉ⭆ꋈ 㢴徃耡薅 㢴徃✳薅ꄍ 1C $E )H $S7* 1## 1#%& 1$# ӧ ӧ ӧ ӧ ӧ ӧ 㢪媽 ӧ ӧ ӧ ӧ ӧ ӧ ꨵ彂⣘䥰㐼 ˋ ӧ ӧ ӧ ӧ ӧ ⪓罌 馄ⴀ XU⿺馄ⴀ XU禹䭷ꣳ欽暟颶⛓涰ⴔ嫱ゎꆀ馄ⴀ涰ⴔ嫱ゎꆀ 㛇彋⧩կ ⪓罌 ӧ禹䭷鑪갪ꣳ欽暟颶⛓涰ⴔ嫱ゎꆀ劢馄ⴀ涰ⴔ嫱ゎꆀ㛇彋⧩կ ⪓罌 禹䭷鑪갪ꣳ欽暟颶捀䱗ꤑ갪湡կ

Explanation of the symbols on the product label Symbol Explanation DC voltage RECYCLING This product bears the selective sorting symbol for Waste electrical and electronic equipment (WEEE). This means that this product must be handled pur- suant to European directive 2012/19/EU in order to be recycled or dismantled to minimize its impact on the environment. User has the choice to give his product to a compe- tent recycling organization or to the retailer when he buys a new electrical or electronic equipment.

)RUWHFKQLFDOVXSSRUW8VHU*XLGHDQGPRUHLQIRUPDWLRQSOHDVHYLVLW KWWSVZZZWSOLQNFRPVXSSRUWRUVLPSO\VFDQWKH45FRGH 7KHSURGXFWVRI73/LQNSDUWO\FRQWDLQVRIWZDUHFRGHGHYHORSHGE\WKLUGSDUWLHVLQFOXGLQJVRIWZDUHFRGHVXEMHFW WRWKH*18*HQHUDO3XEOLF/LFHQVH p*3/q $VDSSOLFDEOHWKHWHUPVRIWKH*3/DQGDQ\LQIRUPDWLRQRQREWDLQLQJ access to the respective GPL Code used in TP-Link products are available to you in GPL-Code-Centre under KWWSVZZZWSOLQNFRPHQVXSSRUWJSO 7KHUHVSHFWLYHSURJUDPVDUHGLVWULEXWHG:,7+287$1<:$55$17< DQGDUHVXEMHFWWRWKHFRS\ULJKWVRIRQHRUPRUHDXWKRUV)RUGHWDLOVVHHWKH*3/&RGHDQGRWKHUWHUPVRIWKH GPL. ©2019 TP-Link 5(9


Document Created: 2019-10-29 11:10:49
Document Modified: 2019-10-29 11:10:49
© 2024 FCC.report
This site is not affiliated with or endorsed by the FCC