Test Report

FCC ID: T2C-T19PE2

Test Report

Download: PDF
FCCID_2897976

E506, 5th Floor, No.39 Keji Middle 2nd Rd, Science & Technology Park, Nanshan District, Shenzhen, P. R. China Tel: + 86 755 83642690 Fax: + 86 755 83297077 www.kmolab.com FCC TEST REPORT Under: FCC Part 15, Class B Prepared For: YEALINK(XIAMEN) NETWORK TECHNOLOGY CO.,LTD 309, 3th Floor, No.16, Yun Ding North Road, Huli District, Xiamen City, Fujian, P.R. China FCC ID: T2C-T19PE2 EUT: IP Phone Model: SIP-T19P E2 December 30, 2015 Issue Date: Extension Report Report Type: Test Engineer: Eric Guo Review By: Apollo Liu / Manager The test report consists 26 pages in total. It may be duplicated completely for legal use with the allowance of the applicant. It shall not be reproduced except in full, without the written approval of Ke Mei Ou Laboratory Corporation. The test result in the report only applied to the tested sample.

YEALINK(XIAMEN) NETWORK TECHNOLOGY CO.,LTD FCC ID: T2C-T19PE2 TABLE OF CONTENTS 1. General Information ........................................................................................................................................................... 3 1. 1 Notes............................................................................................................................................................................... 3 1. 2 Testing Laboratory .......................................................................................................................................................... 3 1. 3 Details of Applicant ........................................................................................................................................................ 3 1. 4 Application Details ......................................................................................................................................................... 3 1. 5 Test Item ......................................................................................................................................................................... 3 1. 6 Test Standards ................................................................................................................................................................. 3 2. Technical Test ...................................................................................................................................................................... 4 2. 1 Summary of Test Results ................................................................................................................................................ 4 2. 2 Measurement Uncertainty ............................................................................................................................................... 4 3. Modifications ....................................................................................................................................................................... 4 4. Conducted Power Line Test................................................................................................................................................ 5 4. 1 Test Equipment ............................................................................................................................................................... 5 4. 2 Test Procedure ................................................................................................................................................................ 5 4. 3 Test Setup ....................................................................................................................................................................... 5 4. 4 Configuration of The EUT.............................................................................................................................................. 6 4. 5 EUT Operating Condition............................................................................................................................................... 7 4. 6 Conducted Power Line Emission Limits ........................................................................................................................ 7 4. 7 Conducted Power Line Test Result ................................................................................................................................. 8 5. Radiated Emission Test ..................................................................................................................................................... 10 5. 1 Test Equipment ............................................................................................................................................................. 10 5. 2 Test Procedure .............................................................................................................................................................. 10 5. 3 Radiated Test Setup ...................................................................................................................................................... 10 5. 4 Configuration of The EUT.............................................................................................................................................11 5. 5 EUT Operating Condition..............................................................................................................................................11 5. 6 Radiated Emission Limit ...............................................................................................................................................11 5. 7 Radiated Emission Test Result...................................................................................................................................... 12 6. Photo of Testing ................................................................................................................................................................. 16 6.1 Emission test view ......................................................................................................................................................... 16 6.2 Photograph - EUT.......................................................................................................................................................... 18 7. FCC ID Label..................................................................................................................................................................... 25 8. Test Equipment.................................................................................................................................................................. 26 KMO FCC ID Report Page 2 of 26 Report #: KSZ2015120801J01

YEALINK(XIAMEN) NETWORK TECHNOLOGY CO.,LTD FCC ID: T2C-T19PE2 1. General Information 1. 1 Notes The test results of this report relate exclusively to the test item specified in 1.5. The KMO Lab does not assume responsibility for any conclusions and generalizations drawn from the test results with regard to other specimens or samples of the type of the equipment represented by the test item. The test report may only be reproduced or published in full. Reproduction or publication of extracts from the report requires the prior written approval of the KMO Lab. 1. 2 Testing Laboratory Ke Mei Ou Laboratory Co., Ltd. ANSI-ASQ National Accreditation Board/ACLASS ISO/IEC 17025 Accredited Lab for telecommunication standards. The Registration Number is AT-1532. The testing quality system meets with ISO/IEC-17025 requirements, This approval results is accepted by MRA of ILAC. FCC Test Site Registration Number: 962205 IC Test Site Registration Number: 4986A-2 Internet: www.kmolab.com 1. 3 Details of Applicant Name : Applicant-Sample Address : 309, 3th Floor, No.16, Yun Ding North Road, Huli District, Xiamen City, Fujian, P.R. China 1. 4 Application Details Date of Receipt of Application : December 8, 2015 Date of Receipt of Test Item : December 8, 2015 Date of Test : December 28~December 30, 2015 1. 5 Test Item Manufacturer : Same as applicant Address : Same as applicant Trade Name : YEALINK Model No.(Base) : SIP-T19P E2 Model No.(Extension) : SIP-T19 E2,SIP-T19G E2 Description : IP Phone Additional Information Product Type : N/A Radio Type : N/A Power Type : DC 5.0V/0.6A(Adapter model: YLPS050600C-US) POE DC 48V Modulation : N/A Data Modulation : N/A Date Rate (Mbps) : N/A Frequency Range : N/A Channel Number : N/A Antenna : N/A 1. 6 Test Standards FCC Part 15, Class B Note: All radiated measurements were made in all three orthogonal planes. The values reported are the maximum values. KMO FCC ID Report Page 3 of 26 Report #: KSZ2015120801J01

YEALINK(XIAMEN) NETWORK TECHNOLOGY CO.,LTD FCC ID: T2C-T19PE2 2. Technical Test 2. 1 Summary of Test Results The EUT has been tested according to the following specifications: Standard Test Type Result Notes FCC Part 15, Paragraph 15.107 Conducted Test PASS Complies FCC Part 15, Paragraph 15.109 Radiated Test PASS Complies 2. 2 Measurement Uncertainty Where relevant, the following measurement uncertainty levels have been estimated for tests performed on the EUT as specified in CISPR 16-4-2: Measurement Frequency Uncertainty Conducted emissions 0.15MHz~30MHz 1.72 Radiated emissions 30MHz ~ 300MHz 3.88 Radiated emissions 300MHz ~1000MHz 3.86 This uncertainty represents an expanded uncertainty expressed at approximately the 95% confidence level using a coverage factor of k=2. Consistent with industry standard (e.g. CISPR 22: 2006, clause 11, Measurement Uncertainty) determining compliance with the limits shall be base on the results of the compliance measurement. Consequently the measure emissions being less than the maximum allowed emission result in this be a compliant test or passing test. The acceptable measurement uncertainty value without requiring revision of the compliance statement is base on conducted and radiated emissions being less than UCISPR which is 3.6dB and 5.2dB respectively. KMO values (called ULab in CISPR 16-4-2) is less than UCISPR as shown in the table above. Therefore, MU need not be considered for compliance. 3. Modifications This product is an extension of original report under FCC ID: T2C-T19PE2 The applicant declare that our product IP Phone, the model SIP-T19P E2 and SIP-T19 E2 and SIP-T19G E2 are electrically identical, they have the same PCB layout and schematic, the only difference is the model SIP-T19P E2 and SIP-T19G E2 with POE circuit the model SIP-T19 E2 without POE circuit . SIP-T19P E2 was tested by KMO. We add one Adapter model and one main PCB board in the original reports this time, others are the same as before. Below is the table for the change of the product with respect to the original one. Modifications Performance Checking *AC Conducted Emissions Add one power adapter mode name: YLPS050600A-EU *Radiated Emissions *AC Conducted Emissions Add one main PCB board *Radiated Emissions KMO FCC ID Report Page 4 of 26 Report #: KSZ2015120801J01

YEALINK(XIAMEN) NETWORK TECHNOLOGY CO.,LTD FCC ID: T2C-T19PE2 4. Conducted Power Line Test 4. 1 Test Equipment Please refer to Section 8 this report. 4. 2 Test Procedure The EUT and simulators are connected to the main power through a line impedance stabilization network (L.I.S.N.). This provides a 50 ohm/50uH coupling impedance for the measuring equipment. The peripheral devices are also connected to the main power through a LISN that provides a 50ohm/50uH coupling impedance with 50ohm termination. Both sides of A.C. line are checked for maximum conducted interference. In order to find the maximum emission., the relative positions of equipment and all of the interface cables must be changed according to ANSI C63.4:2014 on conducted measurement. Conducted emissions were invested over the frequency range from 0.15MHz to 30MHz using a receiver bandwidth of 9kHz. 4. 3 Test Setup Vertical Reference Ground Plane Test receiver 40cm EUT Peripheral 80cm LISN Horizontal Reference Ground Plane For the actual test configuration, Please refer to the related items – Photos of Testing. KMO FCC ID Report Page 5 of 26 Report #: KSZ2015120801J01

YEALINK(XIAMEN) NETWORK TECHNOLOGY CO.,LTD FCC ID: T2C-T19PE2 4. 4 Configuration of The EUT The EUT was configured according to ANSI C63.4:2014. All interface ports were connected to the appropriate peripherals. All peripherals and cables are listed below. A. EUT Device Manufacturer Model # FCC ID IP Phone Same as applicant SIP-T19P E2 T2C-T19PE2 B. Internal Devices Device Manufacturer Model # FCCID / DoC N/A C. Peripherals Model # FCC ID/ Device Manufacturer Cable Serial # DoC 1.5m unshielded power cord Printer HP HP930C DoC 1.2m unshielded data cable. 1.5m unshielded power cord Modem GVC N/A DoC 1.2m unshielded data cable. Notebook DELL PP10L DoC 1.5m unshielded power cord PC Dell 2400n DoC 1.5m unshielded power cord KMO FCC ID Report Page 6 of 26 Report #: KSZ2015120801J01

YEALINK(XIAMEN) NETWORK TECHNOLOGY CO.,LTD FCC ID: T2C-T19PE2 4. 5 EUT Operating Condition Operating condition is according to ANSI C63.4:2014. A. Setup the EUT and simulators as shown on follow. B. Enable RF signal and confirm EUT active. A. Modulate output capacity of EUT up to specification. 120V/60Hz 120V/60Hz AC Mains AC Mains Via Class 2 Via Class 2 Adaptors Adaptors Modem PC EUT Printer Mouse 4. 6 Conducted Power Line Emission Limits Frequency Range (MHz) Class A QP/AV (dBuV) Class B QP/AV (dBuV) 0.15 – 0.5 79/66 66 –56/56 –46 0.5 – 5.0 73/60 56/46 5.0 – 30 73/60 60/50 Note: In the above table, the tighter limit applies at the band edges. KMO FCC ID Report Page 7 of 26 Report #: KSZ2015120801J01

YEALINK(XIAMEN) NETWORK TECHNOLOGY CO.,LTD FCC ID: T2C-T19PE2 4. 7 Conducted Power Line Test Result Product : IP Phone Test Mode : Normal Link / Auto Test Item : Conducted Emission Data Temperature : 25 ℃ Test Voltage : DC 12V/POE Humidity : 56%RH Test Result : PASS Adapter Model : The frequency spectrum from 0.15 MHz to 30 MHz was investigated. All readings are quasi -peak values with a resolution bandwidth of 9 KHz. ． Temperature ： 26 ℃ ． Humidity ： 53 % RH Adapter model: YLPS050600C-US FCC 15 Class B Read Level Emission Limit Margin Frequency (dBuV) Factor (dBuV) Line/ (dBuV) (dBuV) (MHz) QP AV (dB) QP AV Neutral QP AV QP AV 0.166 34.04 19.55 10.30 44.34 29.85 Line 65.16 55.16 -20.82 -25.31 0.150 37.78 24.81 10.30 48.08 35.11 Neutral 66.00 56.00 -17.92 -20.89 0.182 35.38 22.72 10.30 45.68 33.02 Line 64.39 54.39 -18.71 -21.37 0.154 34.87 22.91 10.30 45.17 33.21 Neutral 65.78 55.78 -20.61 -22.57 0.210 32.92 21.64 10.30 43.22 31.94 Line 63.21 53.21 -19.99 -21.27 0.170 31.46 19.54 10.30 41.76 29.84 Neutral 64.96 54.96 -23.20 -25.12 FCC 15 Class B Note: NF = No Significant Peak was Found. POE FCC 15 Class B Read Level Emission Limit Margin Frequency (dBuV) Factor (dBuV) Line/ (dBuV) (dBuV) (MHz) QP AV (dB) QP AV Neutral QP AV QP AV 0.154 34.78 22.31 10.30 45.08 32.61 Line 65.78 55.78 -20.70 -23.17 0.162 39.69 25.98 10.30 49.99 36.28 Neutral 65.36 55.36 -15.37 -19.08 0.162 39.37 26.05 10.30 49.67 36.35 Line 65.36 55.36 -15.69 -19.01 0.166 33.62 21.58 10.30 43.92 31.88 Neutral 65.16 55.16 -21.24 -23.28 0.198 35.89 23.81 10.30 46.19 34.11 Line 63.69 53.69 -17.50 -19.58 0.222 34.05 22.61 10.30 44.35 32.91 Neutral 62.74 52.74 -18.39 -19.83 FCC 15 Class B Note: NF = No Significant Peak was Found. Note: 1.Uncertainty in conducted emission measured is <+/ -2dB. 2.The emission levels of other frequencies were very low against the limit. 3.All Reading Levels are Quasi-Peak and Average value. 4.Emission = Meter Reading + Factor; Factor = Insertion Loss + Cable Loss. 5.Margin Value = Emission Level - Limit Value. KMO FCC ID Report Page 8 of 26 Report #: KSZ2015120801J01

YEALINK(XIAMEN) NETWORK TECHNOLOGY CO.,LTD FCC ID: T2C-T19PE2 Conducted Emission FCC 15.107 Test Specification: LINE&NEUTRAL Comment: Adapter model: YLPS050600C-US RBW 9 kHz Marker 1 [T1 ] MT 100 ms 48.58 dBµV Att 10 dB PREAMP OFF 182.000000000 kHz dBµV 100 1 MHz 10 MHz 90 1 PK VIEW 80 2 PK MAXH 70 TDS EN55022Q 60 EN55022A 1 50 40 30 20 10 0 150 kHz 30 MHz Date: 29.DEC.2015 09:17:26 POE RBW 9 kHz Marker 1 [T1 ] MT 100 ms 52.49 dBµV Att 10 dB PREAMP OFF 162.000000000 kHz dBµV 100 1 MHz 10 MHz 90 1 PK VIEW 80 2 PK MAXH 70 TDS EN55022Q 60 1 EN55022A 50 40 30 20 10 0 150 kHz 30 MHz Date: 29.DEC.2015 13:34:29 KMO FCC ID Report Page 9 of 26 Report #: KSZ2015120801J01

YEALINK(XIAMEN) NETWORK TECHNOLOGY CO.,LTD FCC ID: T2C-T19PE2 5. Radiated Emission Test 5. 1 Test Equipment Please refer to Section 8 this report. 5. 2 Test Procedure 1. The EUT was tested according to ANSI C63.4:2014. 2. The EUT, peripherals were put on the turntable which table size is 1m x 1.5 m, table high 0.8 m, and which is 1.5 m high for above 1 GHz. All set up is according to ANSI C63.4:2014 . 3. The frequency spectrum from 9 kHz to 25 GHz was investigated. All readings from 9 kHz to 150 kHz are quasi-peak values with a resolution bandwidth of 200 Hz. All readings from 150 kHz to 30 MHz are quasi-peak values with a resolution bandwidth of 9 KHz. All readings from 30 MHz to 1 GHz are quasi-peak values with a resolution bandwidth of 120 KHz. All readings are above 1 GHz , peak values with a resolution bandwidth of 1 MHz . Measurements were made at 3 meters. 4. The emissions from the EUT were measured continuously at every azimuth by rotating the turntable. The Receiving antenna high is varied from 1 m to 4 m high to find the maximum emission for each frequency. Emissions below 30MHz were measured with a loop antenna while emission above 30MHz were measured using a broadband E-field antenna. 5. Maximizing procedure was performed on the six (6) highest emissions to ensure EUT compliance is with all installation combinations. All data was recorded in the peak detection mode. Quasi-peak readings was performed only when an emission was found to be marginal (within -4 dB of specification limit), and are distinguished with a "QP" in the data table. 6. Each emission was to be maximized by changing the polarization of receiving antenna both horizontal and vertical. In order to find out the max. emission, the relative positions of this transmitter(EUT) was rotated through three orthogonal axes according to the requirements in Section 8 and 13 of ANSI C63.4:2014 5. 3 Radiated Test Setup For Frequencies below 30 MHz 3M EUT Ground Plane 80cm TURN TABLE Test Receiver For the actual test configuration , please refer to the related items – Photos of Testing KMO FCC ID Report Page 10 of 26 Report #: KSZ2015120801J01

YEALINK(XIAMEN) NETWORK TECHNOLOGY CO.,LTD FCC ID: T2C-T19PE2 For Frequencies above 30 MHz Antenna Antenna Tower 1- 4m Variable 3M EUT Ground Plane 80cm TURN TABLE Test Receiver For the actual test configuration , please refer to the related items – Photos of Testing 5. 4 Configuration of The EUT Same as section 4.4 of this report 5. 5 EUT Operating Condition Same as section 4.5 of this report 5. 6 Radiated Emission Limit All emission from a digital device, including any network of conductors and apparatus connected thereto, shall not exceed the level of field strength specified below: Frequencies in restricted band are complied to limit on Paragraph 15.109. Frequency (MHz) Distance (m) Field Strength (dBuV/m) 30 - 88 3 40.0 88 - 216 3 43.5 216 - 960 3 46.0 Above 960 3 54.0 Note: 1. In the emission tables above, the tighter limit applies at the band edges. 2. Distance refers to the distance between measuring instrument, antenna, and the closest point of any part of the device or system. 3. The lower limit shall apply at the transition frequencies. KMO FCC ID Report Page 11 of 26 Report #: KSZ2015120801J01

YEALINK(XIAMEN) NETWORK TECHNOLOGY CO.,LTD FCC ID: T2C-T19PE2 5. 7 Radiated Emission Test Result Product : IP Phone Test Mode : Normal Link / Auto Test Item : Fundamental Radiated Emission Data Temperature : 25 ℃ Test Voltage : DC 12V/POE Humidity : 56%RH Test Result : PASS Model : For Frequency below 30MHz Freq. Emission (dBuV/m) HORIZ / Limits Margin (MHz) QP Detector VERT (dBuV/m) (dB) N/A N/A N/A N/A N/A N/A Note: (1) All Readings below 1GHz are Quasi-Peak, above are performed with peak and/or average measurements as necessary. (2) “N/A” remark, if no specific emissions from the EUT are recorded (ie: margin>20dB from the applicable limit) and considered that’s already beyond the background noise floor. (3) Emission Level = Reading Level + Probe Factor + Cable Loss. For Frequency from 30MHz to 1GHz Adapter model: YLPS050600C-US FCC 15 Class B Read Emission Frequency Level Factor Horiz./ Limit Margin (MHz) (dBuV) (dB) (dBuV/m) Vert. (dBuV/m) (dB) 266.680 25.76 14.93 40.69 Horiz./ 46.0 -5.31 88.920 21.80 9.69 31.48 Vert. 43.5 -12.02 350.000 19.04 17.13 36.16 Horiz./ 46.0 -9.84 375.000 21.33 17.13 38.45 Vert. 46.0 -7.55 375.000 21.96 17.13 39.08 Horiz./ 46.0 -6.92 466.760 10.10 20.12 30.21 Vert. 46.0 -15.79 FCC 15 Class B POE FCC 15 Class B Read Emission Limit Frequency Level Factor Horiz./ Margin (MHz) (dBuV) (dB) (dBuV/m) Vert. (dBuV/m) (dB) 266.720 22.00 14.93 36.93 Horiz./ 46.0 -9.07 106.720 16.20 13.35 29.55 Vert. 43.5 -13.95 350.040 17.77 17.13 34.89 Horiz./ 46.0 -11.11 250.000 17.08 14.93 32.01 Vert. 46.0 -13.99 375.000 20.06 17.13 37.18 Horiz./ 46.0 -8.82 375.000 19.75 17.13 36.87 Vert. 46.0 -9.13 FCC 15 Class B Note: (1) All Readings below 1GHz are Quasi-Peak, above are performed with peak and/or average measurements as necessary. (2) “N/A” remark, if no specific emissions from the EUT are recorded (ie: margin>20dB from the applicable limit) and considered that’s already beyond the background noise floor. (3) Emission Level = Reading Level + Probe Factor + Cable Loss. KMO FCC ID Report Page 12 of 26 Report #: KSZ2015120801J01

YEALINK(XIAMEN) NETWORK TECHNOLOGY CO.,LTD FCC ID: T2C-T19PE2 Frequency above 1 GHz FCC 15 Class B Read Frequency Level(dBuV) Factor Emission(dBuV/m) Horiz./ Limit (dBuV/m) Margin(dB) (MHz) PK AV (dB) PK AV Vert. PK AV PK AV 2128.000 33.72 17.58 14.93 48.65 32.51 Horiz./ 74.0 54.0 -25.35 -21.49 2048.000 31.26 17.78 13.35 44.61 31.13 Vert. 74.0 54.0 -29.39 -22.87 2325.600 31.69 16.30 17.13 48.81 33.42 Horiz./ 74.0 54.0 -25.19 -20.58 2330.800 34.25 18.52 14.93 49.18 33.45 Vert. 74.0 54.0 -24.82 -20.55 2455.200 32.31 16.14 17.13 49.43 33.26 Horiz./ 74.0 54.0 -24.57 -20.74 2429.200 33.41 16.47 17.13 50.53 33.59 Vert. 74.0 54.0 -23.47 -20.41 FCC 15 Class B Note: (1) All Readings below 1GHz are Quasi-Peak, above are performed with peak and/or average measurements as necessary. (2) Emission Level = Reading Level + Probe Factor + Cable Loss. KMO FCC ID Report Page 13 of 26 Report #: KSZ2015120801J01

YEALINK(XIAMEN) NETWORK TECHNOLOGY CO.,LTD FCC ID: T2C-T19PE2 Radiated Emission FCC 15.109 For Frequency from 30MHz to 1GHz Adapter model: YLPS050600C-US POE KMO FCC ID Report Page 14 of 26 Report #: KSZ2015120801J01

YEALINK(XIAMEN) NETWORK TECHNOLOGY CO.,LTD FCC ID: T2C-T19PE2 For Frequency above 1GHz RBW 1 MHz Marker 1 [T1 ] MT 100 ms 45.86 dBµV/m Att 0 dB PREAMP ON 2.128000000 GHz dBµV 100 /m 90 1 PK VIEW 80 2 PK D1 74 dB* MAXH 70 TDS 60 50 1 40 30 20 10 0 1 GHz 3 GHz Date: 29.DEC.2015 13:57:18 KMO FCC ID Report Page 15 of 26 Report #: KSZ2015120801J01

YEALINK(XIAMEN) NETWORK TECHNOLOGY CO.,LTD FCC ID: T2C-T19PE2 6. Photo of Testing 6.1 Emission test view Conducted Emission test view KMO FCC ID Report Page 16 of 26 Report #: KSZ2015120801J01

YEALINK(XIAMEN) NETWORK TECHNOLOGY CO.,LTD FCC ID: T2C-T19PE2 Radiated Emission test view (Frequency from 30MHz to 1GHz) Radiated Emission test view (Frequency above 1GHz) KMO FCC ID Report Page 17 of 26 Report #: KSZ2015120801J01

YEALINK(XIAMEN) NETWORK TECHNOLOGY CO.,LTD FCC ID: T2C-T19PE2 6.2 Photograph - EUT EUT top view KMO FCC ID Report Page 18 of 26 Report #: KSZ2015120801J01

YEALINK(XIAMEN) NETWORK TECHNOLOGY CO.,LTD FCC ID: T2C-T19PE2 EUT bottom view KMO FCC ID Report Page 19 of 26 Report #: KSZ2015120801J01

YEALINK(XIAMEN) NETWORK TECHNOLOGY CO.,LTD FCC ID: T2C-T19PE2 KMO FCC ID Report Page 20 of 26 Report #: KSZ2015120801J01

YEALINK(XIAMEN) NETWORK TECHNOLOGY CO.,LTD FCC ID: T2C-T19PE2 EUT inside whole view Main board component side KMO FCC ID Report Page 21 of 26 Report #: KSZ2015120801J01

YEALINK(XIAMEN) NETWORK TECHNOLOGY CO.,LTD FCC ID: T2C-T19PE2 Main board solder side KMO FCC ID Report Page 22 of 26 Report #: KSZ2015120801J01

YEALINK(XIAMEN) NETWORK TECHNOLOGY CO.,LTD FCC ID: T2C-T19PE2 KMO FCC ID Report Page 23 of 26 Report #: KSZ2015120801J01

YEALINK(XIAMEN) NETWORK TECHNOLOGY CO.,LTD FCC ID: T2C-T19PE2 FCC Adapter top view Adapter side view KMO FCC ID Report Page 24 of 26 Report #: KSZ2015120801J01

YEALINK(XIAMEN) NETWORK TECHNOLOGY CO.,LTD FCC ID: T2C-T19PE2 7. FCC ID Label The following note shall be conspicuously placed in the users manual: “Operation is subject to the following two conditions: (1) this device may not cause interference, and (2) this device must accept any interference, including interference that may cause undesired operation of this device.” The Label must not be a stick-on paper label. The Label on these products must be permanently affixed to the product and readily visible at the time of purchase and must last the expected lifetime of the equipment not be readily detachable. Proposed Label Location on EUT KMO FCC ID Report Page 25 of 26 Report #: KSZ2015120801J01

YEALINK(XIAMEN) NETWORK TECHNOLOGY CO.,LTD FCC ID: T2C-T19PE2 8. Test Equipment The following test equipments were used during the radiated & conducted emission test: Equipment/ Manufacturer Model # Serial No. Due Date Facilities Turntable Innco systems GmbH CT-0801 KMO-SZ114 NCR Antenna Tower Innco systems GmbH MM4000-PP KMO-SZ115 NCR Controller Innco systems GmbH CO2000 KMO-SZ116 NCR Pre-Amplifier Agilent 87405C KMO-SZ155 Dec.6, 2016 Pre-Amplifier Com-Power PAM-840 KMO-SZ156 Dec.6, 2016 Horn Antenna Com-Power AH-840 KMO-SZ157 Dec.6, 2016 EMI Test Receiver Rohde & Schwarz ESPI7 KMO-SZ002 June 27, 2016 Spectrum Analyzer Rohde & Schwarz FSP40 KMO-SZ003 June 27, 2016 Signal Generator FLUKE PM5418+Y/C KMO-SZ020 May 27, 2016 Loop Antenna Rohde & Schwarz HFH2-Z2 KMO-SZ004 August 19, 2018 Trilog-Super Broadband SCHWARZBECK VULB9161 KMO-SZ005 August 27, 2018 Antenna Trilog-Super Broadband SCHWARZBECK VULB9161 KMO-SZ006 August 19, 2018 Antenna Broad-Band Horn Antenna SCHWARZBECK BBHA 9120D KMO-SZ007 August 19, 2018 Broad-Band Horn Antenna SCHWARZBECK BBHA 9120D KMO-SZ008 August 19, 2018 AMN Rohde & Schwarz ESH3-Z5 KMO-SZ009 June 27, 2016 Pulse Limiter SCHWARZBECK VTSD 9561-F KMO-SZ077 Nov.29, 2016 ISN SCHWARZBECK NTFM 8158 CAT3 KMO-SZ070 Nov.19, 2016 ISN SCHWARZBECK NTFM 8158 CAT5 KMO-SZ071 Nov.19, 2016 ISN SCHWARZBECK NTFM 8158 CAT6 KMO-SZ072 Nov.19, 2016 KMO Shielded Room KMO KMO-001 KMO-SZ036 NCR Coaxial Cable with SCHWARZBECK AK9515H KMO-SZ037 Sep.18, 2016 N-Connectors AC Power Source / Analyzer Agilent 6813B KMO-SZ166 July 22, 2016 Power Meter Rohde & Schwarz OSP-B157 KMO-HK015 Nov.6, 2016 Digital Radio Communication Rohde & Schwarz CMD60 KMO-SZ169 April 10, 2016 Tester Universal Radio Rohde & Schwarz CMU200 KMO-SZ170 April 10, 2016 Communication Tester Regulatory Test System Rohde & Schwarz TS8997 KMO-HK015 Nov.6, 2016 30 MHz to 40 GHz Program Control Telephone Excelltel CDX8000-M KMO-SZ221 NCR Exchanger 3m Anechoic Chamber KMO KMO-3AC KMO-3AC-1 Nov.12, 2016 Temperature TABAI PSL-4GTW N/A Feb.10, 2016 Chamber KMO FCC ID Report Page 26 of 26 Report #: KSZ2015120801J01


Document Created: 2019-07-05 04:27:31
Document Modified: 2019-07-05 04:27:31
© 2024 FCC.report
This site is not affiliated with or endorsed by the FCC