Test Setup Photos - HR1622-2

FCC ID: SSVNAEPI02

Test Setup Photos

Download: PDF
FCCID_4191805

Annex 3: Set-up photographs to PARTIAL T E S T R E P O R T No.: 18-1-0210201T02a According to: FCC Regulations Part 15.107, Part 15.109, Part15.247 ISED-Regulations RSS-Gen, Issue 5, RSS-247, Issue 2 for Miele &Cie. KG Wireless Food Probe System (Host:HR1622-2) Contains FCC ID: SSVNAEPI02 Contains ISED: 5669B-NAEPI02 Laboratory Accreditation and Listings Accredited EMC-Test Laboratory accredited according to DIN EN ISO/IEC 17025 CETECOM GmbH Laboratory Radio Communications & Electromagnetic Compatibility Im Teelbruch 116 • 45219 Essen • Germany Registered in Essen, Germany, Reg. No.: HRB Essen 8984 Tel.: + 49 (0) 20 54 / 95 19-954 • Fax: + 49 (0) 20 54 / 95 19-964 E-mail: info@cetecom.com • Internet: www.cetecom.com Page 1 of 6 The test results relate only to the individual items that have been tested. This report shall not be reproduced in parts without the written approval of the testing laboratory © Copyright: All rights reserved by CETECOM

Annex 3 to Test Report 18-1-0210201T02a, Page 2 of 6 TABLE OF CONTENTS: 1. CONDUCTED RF-MEASUREMENTS SET-UP .......................................................................................... 3 1.1. Conducted measurements ............................................................................................................................. 3 2. CONDUCTED -MEASUREMENTS SET-UP ............................................................................................... 4 2.1. Conducted Emissions AC ............................................................................................................................. 4 3. RADIATED RF-MEASUREMENTS SET-UP............................................................................................... 5 3.1. Radiated Field Strength Emissions – 9 kHz to 30 MHz ............................................................................... 5 3.2. Radiated Field Strength Emissions – 30 MHz to 1GHz ............................................................................... 5 3.3. Radiated Field Strength Emissions – above 1 GHz ...................................................................................... 6 CETECOM_TR18-1-0210201T02a-A3

Annex 3 to Test Report 18-1-0210201T02a, Page 3 of 6 1. Conducted RF-Measurements Set-up 1.1. Conducted measurements Photograph 1: Set Up 1-Overall View Photograph 2: Set Up 1-Close View CETECOM_TR18-1-0210201T02a-A3

Annex 3 to Test Report 18-1-0210201T02a, Page 4 of 6 2. Conducted -Measurements Set-up 2.1. Conducted Emissions AC Photograph 3: Conducted emission on the AC port Set Up Photograph 4: Conducted emission on the AC port Set Up CETECOM_TR18-1-0210201T02a-A3

Annex 3 to Test Report 18-1-0210201T02a, Page 5 of 6 3. Radiated RF-Measurements Set-up 3.1. Radiated Field Strength Emissions – 9 kHz to 30 MHz Photograph 5: Set Up - Front side Overall View- 9 kHz-30 MHz- Front Side 3.2. Radiated Field Strength Emissions – 30 MHz to 1GHz Photograph 6: Set Up - Front side Overall View- 30 MHz – 1 GHz- Front Side CETECOM_TR18-1-0210201T02a-A3

Annex 3 to Test Report 18-1-0210201T02a, Page 6 of 6 3.3. Radiated Field Strength Emissions – above 1 GHz Photograph 7: Set Up -overall View- above 3GHz - EUT 0°- Front Side Photograph 8: Set Up -overall View- above 1GHz - EUT 0°- Front Side CETECOM_TR18-1-0210201T02a-A3


Document Created: 2019-02-08 15:49:37
Document Modified: 2019-02-08 15:49:37
© 2024 FCC.report
This site is not affiliated with or endorsed by the FCC