Users Manual Part I

FCC ID: SS3-WM3221503

Users Manual

Download: PDF
FCCID_2588758

PHANTOM 3 Advanced User Manual V1.0 2015.03

Using this manual Legends Warning Important Hints and Tips Reference Read Before the First Flight Read the follow documents before using the Phantom 3 Advanced for the first time. 1. Disclaimer 2. Phantom 3 Advanced Quick Start Guide 3. Phantom 3 Advanced User Manual 4. In the Box 5. Safety Guidelines 6. Intelligent Flight Battery Safety Guidelines It is recommended to watch all the tutorial videos on DJI official website and read the Disclaimer before your first flight. Prepare for your first flight by using the Phantom 3 Advanced Quick Start Guide. Refer to the user manual for more detailed information. Video Tutorials Please watch the tutorial video below to learn how to use Phantom 3 Advanced safely: http://www.dji.com/product/phantom-3-advanced/video Download the DJI Pilot app Download and install the DJI Pilot app before use. Scan the QR code below to download. For Android version of the DJI Pilot app is compatible with Android 4.1.2 or later. For iOS version of the DJI Pilot app is compatible with iOS 8.0 or later. 2 © 2015 DJI. All Rights Reserved.

Contents Using this manual Legends 2 Before Flight 2 Watch the video tutorials 2 Download the DJI Pilot app 2 Product Profile Introduction 6 Feature Highlights 6 Assemble the Aircraft 7 Aircraft Diagram 8 Remote Controller Diagram 9 Aircraft Flight Controller 12 Flight Mode 12 Flight Status Indicator 12 Return to Home (RTH) 13 Smart RTH 13 Low Battery RTH 14 Failsafe RTH 15 Dynamic Home Point 15 Vision Positioning System 16 Flight Recorder 17 Attaching and Detaching the Propellers 17 DJI Intelligent Flight Battery 18 Remote Control Remote Controller Profile 24 Remote Controller Operations 24 Remote Controller Status LED 29 Linking the Remote Controller 29 Remote Controller Compliance Version 30 © 2015 DJI. All Rights Reserved. 3

Camera and Gimbal Camera Profile 32 Gimbal 33 DJI Pilot App Camera 36 Map 40 Academy 40 User Center 40 Flight Flight Environment Requirements 42 Flight Limits and Flight Restriction Area 42 Preflight Checklist 46 Calibrating the Compass 46 Auto Take-off and Auto Landing 47 Flight Test 48 Starting/Stopping the Motors 48 Troubleshooting (FAQ) Appendix Specifications 53 Intelligent Orientation Control (IOC) 56 FCC Compliance 57 4 © 2015 DJI. All Rights Reserved.

Product Profile This chapter introduces the Phantom 3 Advanced and lists the components on the aircraft and remote controllers. © 2015 DJI. All Rights Reserved. 5

Product Profile Introduction The Phantom 3 Advanced is a brand new quadcopter capable of capturing HD video and transmitting an HD video signal out of the box. The built-in camera has an integrated gimbal to maximize stability and weight efficiency while minimizing space. Even when no GPS signal is available, Vision Positioning sys- tem provides hovering precision. Feature Highlights Product Profile Camera and Gimbal: The Phantom 3 Advanced camera records video at up to 1080P and it is capable of capturing 12 megapixel stills. HD Video Downlink: Low latency, HD downlink powered by an enhanced version of the DJI Lightbridge system. DJI Intelligent Flight Battery: 4480 mAh DJI Intelligent Flight Battery employs new battery cells and a bat- tery management system. Flight Controller: The next generation flight controller system provides a more reliable flight experience. A new flight recorder stores the flight data from each flight, and Vision Positioning enhances hovering preci- sion when flying indoors and no GPS is available. 6 © 2015 DJI. All Rights Reserved.

Phantom 3 Advanced User Manual Assemble the Aircraft Removing Gimbal Clamp Remove the gimbal clamp in the direction as shown below: Product Profile Attaching Propellers Attach the propellers with the black nut onto motors with the black axis and spin counter-clockwise to se- cure. Attach propellers with grey nut onto motors without a grey axis and spin clockwise to secure. Place all propellers onto the correct motor and tighten by hand to secure its position. Preparing Remote Controller Tilt the Mobile Device Holder to the desired position then adjust the antennas. 1. Press the button on the side of the Mobile Device Holder to release the clamp, adjust the clamp to fit the size of the mobile device. 2. Connect the mobile device to the remote controller with a USB cable. 3. Plug one end of the cable into the mobile device, and the other end into the USB port on the back of the remote controller. 2 1 3 © 2015 DJI. All Rights Reserved. 7

Phantom 3 Advanced User Manual Aircraft Diagram [1] [2] [1] GPS [3] [4] [2] Propeller [7] [3] Motor [6] [5] [4] Front LED Product Profile [5] Landing gear [6] Gimbal and Camera [8] [9] [7] Aircraft Micro-USB Port [10] [8] Aircraft Status Indicator [11] [9] Intelligent Flight Battery [10] Vision Positioning Sensors [11] Antennas [12] Camera Micro-SD Card Slot [12] [13] Camera Micro-USB Port [13] Remote Controller Diagram [1] Antennas Relays aircraft control and [1] [2] video signal. [2] Mobile Device Holder Mounting place for your mobile device. [3] [8] [3] Control Stick [4] [7] [5] Controls aircraft orientation. [6] [4] Return Home (RTH) Button Press and hold the button to initiate Return to Home (RTH). 8 © 2015 DJI. All Rights Reserved.

Phantom 3 Advanced User Manual [5] Battery Level LEDs Displays the battery level of the remote controller. [6] Status LED Displays the remote controller's system status. [7] Power Button Used to power on or power off the remote controller. [8] RTH LED Product Profile Circular LED around the RTH button displays RTH status. [15] [16] [9] Camera Settings Dial Turn the dial to adjust camera settings. [14] [9] Only functions when the remote controller is [13] [10] connected to a mobile device running the DJI Pilot app. [11] [12] [10] Playback Button Playback the captured images or videos. [11] Shutter Button Press to take a photo. If in burst mode, the set number of photos will be taken with one press. [12] Flight Mode Switch Switch between P, A and F mode. [15] Mircro-USB Port [13] Video Recording Button Connect to a SD card reader to upgrade the Press to start recording video. Press again to firmware. stop recording. [16] USB Port [14] Gimbal Dial Connect to mobile device or to a USB thumb Use this dial to control the tilt of the gimbal. drive for firmware upgrdae. [17] Back Right Button Customizable button in DJI Pilot app. [18] Back Left Button [18] [17] Customizable button in DJI Pilot app. [19] Power Port Connect to a power source to charge the bat- [19] tery of the remote controller. © 2015 DJI. All Rights Reserved. 9

Aircraft This chapter introduces the features of the flight controller, Vision Positioning System and the Intelligent Flight Battery. 10 © 2015 DJI. All Rights Reserved.

Aircraft Flight Controller The Phantom 3 Advanced’s flight controller is based on DJI flight controller with several enhancements such as new flight mode. Three safe modes are available: Failsafe, Return Home and Dynamic Home Point. These features ensure the safe return of your aircraft if the control signal is lost. The flight controller can stores crucial flight data to the on-board storage device for each flight. Flight Mode Three flight modes are available. The details of each flight mode are found in the section below: P mode (Positioning) : P mode works best when GPS signal is strong. There are three different states of P Aircraft mode, which will be automatically selected by the Phantom 3 Advanced depending on signal strength of GPS and Vision Positioning sensors : P-GPS: GPS and Vision Positioning both are available, and the aircraft is using GPS for positioning. P-OPTI: Vision Positioning is available but the GPS signal is not. Aircraft is using only Vision Position- ing for hovering P-ATTI: Neither GPS or Vision Positioning available, aircraft is using only its barometer for positioning, so only altitude is controlled. A mode (Attitude): GPS and Vision Positioning System is not used for stabilization. The aircraft only uses its barometer to stabilize. The aircraft can automatically return home if remote control signal is lost if the Home Point is recorded successfully. F mode (Function): Intelligent Orientation Control (IOC) is activated in this mode. For more information about IOC, refer to the IOC section in the Appendix. Use the Flight Controller mode switch to change the flight mode of the aircraft, refer to the “Flight Mode Switch” on P24 for more information. Flight Status Indicator The Phantom 3 Advanced comes with the Front LED and Aircraft Status Indicator. The positions of these LEDs are shown in the figure below: Aircraft Status Indicator Front LED The Front shows the orientation of the aircraft. The Front LED displays solid red. Aircraft Status Indicator shows the system status of the flight controller. Refer to the table below for more information about the Aircraft Status Indicator: © 2015 DJI. All Rights Reserved. 11

Phantom 3 Advanced User Manual Aircraft Status Indicator Description Normal Red, Green and Yellow Flash Power on and self-check Alternatively Green and Yellow Flash Alternatively Aircraft warming up Safe to Fly (P mode with GPS and Vision Green Flashes Slowly Positioning) Safe to Fly (P mode with Vision Positioning but X2 Green Flashes Twice without GPS) Aircraft Safe to Fly (A mode but No GPS and Vision Yellow Flashes Slowly Positioning) Warning Fast Yellow Flashing Remote Controller Signal Lost Slow Red Flashing Low Battery Warning Fast Red Flashing Critical Low Battery Warning Red Flashing Alternatively IMU Error — Solid Red Critical Error Red and Yellow Flash Alternatively Compass Calibration Required Return to Home (RTH) The Return to Home (RTH) brings the aircraft back to the last recorded Home Point. There are three cases that will trigger RTH procedure; they are Smart RTH, Low Battery RTH and Failsafe RTH. The remaining part of this section will describe these three cases in details. GPS Description The Home Point is the location at which your aircraft takes off when the GPS signal is strong. You can view the GPS signal strength through Home Point the GPS icon ( ). Aircraft status indicator will blink rapidly when home point is recorded. Smart RTH Use the RTH button on the remote controller (refer to “RTH button” on P28 for more information) or tap the RTH button in the DJI Pilot app when GPS is available to start Smart RTH. The aircraft returns to the latest recorded Home Point, you may control the aircraft's orientation to avoid collision during the Smart RTH. Press and hold the Smart RTH button once to start the process, press the Smart RTH button again to exit Smart RTH and regain the control. 12 © 2015 DJI. All Rights Reserved.

Phantom 3 Advanced User Manual Low Battery RTH The low battery level failsafe is triggered when the DJI Intelligent Flight Battery is depleted to a point that may affect the safe return of the aircraft. Users are advised to return home or land the aircraft immediately when these warnings are prompted. DJI Pilot app will advise user to return the aircraft to the Home Point when low battery warning is triggered. Aircraft will automatically return to the Home Point if no action is taken after 10 seconds countdown. User can cancel the RTH by pressing once on the RTH button. The thresholds for these warnings are automatically determined based on the current aircraft altitude and its distance from the Home Point. Aircraft will land automatically if the current battery level can only support the aircraft to land from the current altitude. User can use the remote controller to control the aircraft’s orientation during the landing process. Aircraft The Battery Level Indicator is displayed in the DJI Pilot app, and is described below Critical Low battery level Sufficient battery warning(Red) level(Green) Low battery level warning(Yellow) Remaining flight time Power requires to return home Battery level Indicator Battery Level Aircraft Status Remark DJI Pilot app Flight Instructions Warning Indicator Tap “Go-home” to have the aircraft return to the Fly the aircraft Home point and land back and land Low battery The battery Aircraft status automatically, or “Cancel” to it as soon as level warning power is low. indicator blinks resume normal flight. If no possible, then Please land the RED slowly. action is taken, the aircraft stop the motors aircraft. will automatically go home and replace the and land after 10 seconds. battery. Remote controller will sound an alarm. The DJI Pilot app screen will The aircraft Critical Low The aircraft Aircraft status flash red and aircraft starts to will begin to battery level must land indicator blinks descend. Remote controller descend and land warning immediately. RED quickly. will sound an alarm. automatically. Estimated Estimated remaining flight remaining N/A N/A N/A based on current flight time battery level. © 2015 DJI. All Rights Reserved. 13

Phantom 3 Advanced User Manual When the critical battery level warning activates and the aircraft is descending to land automatically, you may push the throttle upward to hover the aircraft and navigate it to a more appropriate location for landing. Color zones and markers on the battery level indicator reflect estimated remaining flight time and are adjusted automatically, according to the aircraft’s current status. Failsafe RTH Failsafe RTH is activated automatically if remote controller signal (including video relay signal) is lost for more than 3 seconds provided that Home Point has been successfully recorded and compass is working Aircraft normally. Return home process may be interrupted and the operator can regain control over the aircraft if a remote controller signal is resumed. Failsafe Illustration 1 Record Home Point (HP) 2 Confirm Home Point 3 Remote Controller Signal Lost × Blinking Green Blinking Green Fast Blinking Yellow 4 Signal Lost Lasts 3secs. 5 Go Home(altitude adjustable) 6 Landing after Hovering 5 secs >3S Height over HP>20m × × × Elevate to 20m 20m Fast Blinking Yellow Fast Blinking Yellow Height over HP<=20m<=20m Fast Blinking Yellow Aircraft cannot avoid obstruction during the Failsafe RTH, therefore it is important to set an suitable Failsafe altitude before each flight. Launch the DJI Pilot app and enter “Camera” view and select “MODE” to set the Failsafe altitude. Aircraft will stop ascending and return to the Home Point immediately if throttle stick is moved during the Failsafe RTH procedure Dynamic Home Point Dynamic home point is useful in situations when you are in motion and require a Home Point that is different from the takeoff point. You may only use the Dynamic Home Point feature on the GPS - enabled mobile device. Ensure the space above the GPS module is not obstructed when using Dynamic Home Point. 14 © 2015 DJI. All Rights Reserved.


Document Created: 2019-10-26 08:53:53
Document Modified: 2019-10-26 08:53:53
© 2024 FCC.report
This site is not affiliated with or endorsed by the FCC