Test report

FCC ID: SAP515238

Test Report

Download: PDF
FCCID_4236012

EMC & RF Test Report As per Canada RSS-210 Issue 9 & FCC Part 15 Subpart 15.209 Unlicensed Intentional Radiators on the Quantam Pixel Lock Issued by: TÜV SÜD Canada Inc. 2972 Joseph-A-Bombardier Laval, QC, H7P 6E3 Testing produced for Canada Ph: (450) 687-4976 See Appendix A for full client & EUT details. Scott Drysdale Test Personnel Registration # 6844B-1 Testing Laboratory Registration # Certificate #2955.02 382292 Page 1 of 27 Report Issued: 3/22/2019 Report File #: 7169003030FCC-000 © TÜV SÜD Canada Inc. This test report shall not be reproduced except in full, without written approval of TÜV SÜD Canada Inc FCC 15 247 Rev2

Client Dormakaba Canada Inc Product Quantam Pixel Lock RSS-210 Issue 9 Standard(s) FCC Part 15 Subpart 15.209 Table of Contents Table of Contents................................................................................................................... 2 Report Scope.......................................................................................................................... 3 Summary................................................................................................................................ 4 • Test Results Summary ........................................................................................... 5 • Notes, Justifications, or Deviations ....................................................................... 6 • Sample Calculation(s)............................................................................................ 6 Applicable Standards, Specifications and Methods............................................................... 7 Document Revision Status..................................................................................................... 8 Definitions and Acronyms ..................................................................................................... 9 Testing Facility .................................................................................................................... 10 • Calibrations and Accreditations........................................................................... 10 • Testing Environmental Conditions and Dates ..................................................... 11 Detailed Test Results Section .............................................................................................. 12 • Transmitter Spurious Radiated Emissions ........................................................... 13 • Occupied Bandwidth............................................................................................ 21 Appendix A – EUT Summary.............................................................................................. 24 Appendix B – EUT and Test Setup Photos.......................................................................... 26 Page 2 of 27 Report Issued: 3/22/2019 Report File #: 7169003030FCC-001 © TÜV SÜD Canada Inc. This test report shall not be reproduced except in full, without written approval of TÜV SÜD Canada Inc

Client Dormakaba Canada Inc Product Quantam Pixel Lock RSS-210 Issue 9 Standard(s) FCC Part 15 Subpart 15.209 Report Scope This report addresses the EMC verification testing and test results of the Quantam Pixel Lock, and is herein referred to as EUT (Equipment Under Test). The EUT was tested for compliance against the following standards: RSS-210 Issue 9:2016 FCC Part 15 Subpart C 15.209:2016 Test procedures, results, justifications, and engineering considerations, if any, follow later in this report. This report does not imply product endorsement by any government, accreditation agency, or TÜV SÜD Canada Inc. Opinions or interpretations expressed in this report, if any, are outside the scope of TÜV SÜD Canada Inc accreditations. Any opinions expressed do not necessarily reflect the opinions of TÜV SÜD Canada Inc, unless otherwise stated. Page 3 of 27 Report Issued: 3/22/2019 Report File #: 7169003030FCC-001 © TÜV SÜD Canada Inc. This test report shall not be reproduced except in full, without written approval of TÜV SÜD Canada Inc

Client Dormakaba Canada Inc Product Quantam Pixel Lock RSS-210 Issue 9 Standard(s) FCC Part 15 Subpart 15.209 Summary The results contained in this report relate only to the item(s) tested. EUT: Quantam Pixel Lock FCC Certification #, FCC ID: SAP515238 Industry Canada Certification #, IC: 7078A-515238 EUT passed all tests performed Yes Tests conducted by Scott Drysdale For testing dates, see "Testing Environmental Conditions and Dates". Page 4 of 27 Report Issued: 3/22/2019 Report File #: 7169003030FCC-001 © TÜV SÜD Canada Inc. This test report shall not be reproduced except in full, without written approval of TÜV SÜD Canada Inc

Client Dormakaba Canada Inc Product Quantam Pixel Lock RSS-210 Issue 9 Standard(s) FCC Part 15 Subpart 15.209 Test Results Summary Standard/Method Description Class/Limit Result Pass FCC 15.203 Antenna Requirement Unique See Justification FCC 15.205 Restricted Bands for QuasiPeak Pass RSS-GEN (Table 6) Intentional Operation Average See Justification Spurious Radiated QuasiPeak Emissions Average Pass FCC 15.209 Fundamental < 50mV/m RSS-GEN (Table 4) Harmonics < 500uV/m Spurious — — Occupied bandwidth FCC 15.207 Power Line Conducted QuasiPeak Pass RSS-GEN (Table 3) Emissions Average See Justifications Overall Result Pass If the product as tested or otherwise complies with the specification, the EUT is deemed to comply with the requirement and is deemed a ‘PASS’ grade. If not ‘FAIL’ grade will be issued. Note that ‘PASS’ / ‘FAIL’ grade is independent of any measurement uncertainties. A ‘PASS’ / ‘FAIL’ grade within measurement uncertainty is marked with a ‘*’. Page 5 of 27 Report Issued: 3/22/2019 Report File #: 7169003030FCC-001 © TÜV SÜD Canada Inc. This test report shall not be reproduced except in full, without written approval of TÜV SÜD Canada Inc

Client Dormakaba Canada Inc Product Quantam Pixel Lock RSS-210 Issue 9 Standard(s) FCC Part 15 Subpart 15.209 Notes, Justifications, or Deviations The following notes, justifications for tests not performed or deviations from the above listed specifications apply: For the Antenna requirement specified in FCC 15.203, the unit uses a PCB trace loop antenna for 13.56 MHz with less gain than 6 dBi. For the Restricted Bands of operation, the EUT is designed to only operate at 13.56 MHz. For the scope of this test report, the EUT was mounted in three orthogonal axis to maximize emissions. Worst case results are presented. The EUT was tested with both the RFID on in continuous transmission. The worst case results are presented. Power line conducted emissions was not performed as the device was battery powered with no provision for connection to AC mains. Sample Calculation(s) Radiated Emission Test Margin = Limit – (Received Signal + Antenna Factor + Cable Loss – Pre-Amp Gain) Margin = 50.5dBµV/m – (50dBµV + 10dB + 2.5dB – 20dB) Margin = 8.0 dB (pass) Power Line Conducted Emission Test Margin = Limit – (Received Signal + Attenuation Factor + Cable Loss + LISN Factor) Margin = 73.0dBµV – (50dBµV + 10dB + 2.5dB + 0.5dB) Margin = 10.0 dB (pass) Page 6 of 27 Report Issued: 3/22/2019 Report File #: 7169003030FCC-001 © TÜV SÜD Canada Inc. This test report shall not be reproduced except in full, without written approval of TÜV SÜD Canada Inc

Client Dormakaba Canada Inc Product Quantam Pixel Lock RSS-210 Issue 9 Standard(s) FCC Part 15 Subpart 15.209 Applicable Standards, Specifications and Methods ANSI C63.4:2014 Methods of Measurement of Radio-Noise Emissions from Low- Voltage Electrical and Electronic Equipment in the Range of 9 kHz to 40 GHz ANSI C63.10:2013 American National Standard For Testing Unlicensed Wireless Devices CFR 47 FCC 15 Code of Federal Regulations – Radio Frequency Devices, Subpart C:2017 Intentional Radiators CISPR 22:2008 Information Technology Equipment - Radio Disturbance Characteristics - Limits and Methods of Measurement FCC KDB 558074: FCC KDB 558074 Digital Transmission Systems, measurements 2016 and procedures ICES-003 Issue 6 Digital Apparatus - Spectrum Management and 2016 Telecommunications Policy Interference-Causing Equipment Standard RSS-GEN Issue 4 General Requirements and Information for the Certification of 2014 Radio Apparatus ISO 17025:2005 General Requirements for the Competence of Testing and Calibration Laboratories Page 7 of 27 Report Issued: 3/22/2019 Report File #: 7169003030FCC-001 © TÜV SÜD Canada Inc. This test report shall not be reproduced except in full, without written approval of TÜV SÜD Canada Inc

Client Dormakaba Canada Inc Product Quantam Pixel Lock RSS-210 Issue 9 Standard(s) FCC Part 15 Subpart 15.209 Document Revision Status Revision 000 - Oct 29, 2018. Initial Release Revision 001 – Mar 22, 2019. Test setup photos removed as per customer request, provided in separate exhibit to FCC. Page 8 of 27 Report Issued: 3/22/2019 Report File #: 7169003030FCC-001 © TÜV SÜD Canada Inc. This test report shall not be reproduced except in full, without written approval of TÜV SÜD Canada Inc

Client Dormakaba Canada Inc Product Quantam Pixel Lock RSS-210 Issue 9 Standard(s) FCC Part 15 Subpart 15.209 Definitions and Acronyms The following definitions and acronyms are applicable in this report. See also ANSI C63.14. AE – Auxiliary Equipment. A digital accessory that feeds data into or receives data from another device (host) that in turn, controls its operation. BW – Bandwidth. Unless otherwise stated, this is refers to the 6 dB bandwidth. EMC – Electro-Magnetic Compatibility. The ability of an equipment or system to function satisfactorily in its electromagnetic environment without introducing intolerable electromagnetic disturbances to anything in that environment. EMI – Electro-Magnetic Immunity. The ability to maintain a specified performance when the equipment is subjected to disturbance (unwanted) signals of specified levels. EUT – Equipment Under Test. A device or system being evaluated for compliance that is representative of a product to be marketed. ITE – Information Technology Equipment with a primary function(s) of entry, storage, display, retrieval, transmission, processing, switching, or control, of data. LISN – Line Impedance Stabilization Network NCR – No Calibration Required RF – Radio Frequency Page 9 of 27 Report Issued: 3/22/2019 Report File #: 7169003030FCC-001 © TÜV SÜD Canada Inc. This test report shall not be reproduced except in full, without written approval of TÜV SÜD Canada Inc

Client Dormakaba Canada Inc Product Quantam Pixel Lock RSS-210 Issue 9 Standard(s) FCC Part 15 Subpart 15.209 Testing Facility Testing for EMC on the EUT was carried out at TÜV SÜD Canada testing lab in Laval, near Montréal, Québec, Canada. The testing lab has a calibrated 3m semi-anechoic chamber which allows measurements on an EUT that has a maximum width or length of up to 2m and a height of up to 3m. The chamber is equipped with a turntable that is capable of testing devices up to 3300lb in weight. This facility is capable of testing products that are rated for 120Vac and 240Vac single phase, or devices that are rated for a 208Vac 3 phase input. DC capability is also available for testing. The chamber is equipped with a mast that controls the polarization and height of the antenna. Control of the mast occurs in the control room adjoining the shielded chamber. Radiated emission measurements are performed using a BiLog antenna and a Horn antenna where applicable. Conducted emissions, unless otherwise stated, are performed using a LISN and using the Vertical Ground plane if applicable. For ESD testing, the HCP is 1.6m x 0.8m and the VCP is 0.5m x 0.5m. The reference ground plane, when applicable, is 1.6m x 1.6m. Calibrations and Accreditations The 3m semi-anechoic chamber is registered with Federal Communications Commission (FCC, 382292) and Industry Canada (IC, 6844B-1). This chamber was calibrated for Normalized Site Attenuation (NSA) using test procedures outlined in ANSI C63.4 "Methods of Measurement of Radio-Noise Emissions from Low-Voltage Electrical and Electronic Equipment in the Range of 9 kHz to 40 GHz". The chamber is lined with ferrite tiles and absorption cones to minimize any undesired reflections. The NSA data is kept on file at TÜV SÜD Canada. For radiated susceptibility testing, a 16 point field calibration has been performed on the chamber. The field uniformity data is kept on file at TÜV SÜD Canada. TÜV SÜD Canada Inc is accredited to ISO/IEC 17025 by A2LA with Testing Certificate #2955.02. The laboratory's current scope of accreditation listing can be found as listed on the A2LA website. All measuring equipment is calibrated on an annual or bi- annual basis as listed for each respective test. Page 10 of 27 Report Issued: 3/22/2019 Report File #: 7169003030FCC-001 © TÜV SÜD Canada Inc. This test report shall not be reproduced except in full, without written approval of TÜV SÜD Canada Inc

Client Dormakaba Canada Inc Product Quantam Pixel Lock RSS-210 Issue 9 Standard(s) FCC Part 15 Subpart 15.209 Testing Environmental Conditions and Dates Following environmental conditions were recorded in the facility during time of testing Temperature Humidity Date Test Initials (ºC) Pressure (kPa) (%) Radiated Oct 1, 2018 SD 20 – 24 40 – 51 98.0 – 102.0 Emissions Page 11 of 27 Report Issued: 3/22/2019 Report File #: 7169003030FCC-001 © TÜV SÜD Canada Inc. This test report shall not be reproduced except in full, without written approval of TÜV SÜD Canada Inc

Client Dormakaba Canada Inc Product Quantam Pixel Lock RSS-210 Issue 9 Standard(s) FCC Part 15 Subpart 15.209 Detailed Test Results Section Page 12 of 27 Report Issued: 3/22/2019 Report File #: 7169003030FCC-001 © TÜV SÜD Canada Inc. This test report shall not be reproduced except in full, without written approval of TÜV SÜD Canada Inc

Client Dormakaba Canada Inc Product Quantam Pixel Lock RSS-210 Issue 9 Standard(s) FCC Part 15 Subpart 15.209 Transmitter Spurious Radiated Emissions Purpose The purpose of this test is to ensure that the RF energy unintentionally emitted from the EUT does not exceed the limits listed below as defined in the applicable test standard, as measured from a receiving antenna. This helps protect broadcast radio services such as television, FM radio, pagers, cellular telephones, emergency services, and so on, from unwanted interference. Limits and Method The method is as defined in Section 12.2 of FCC KDB 558074 and ANSI C63.10. These emissions must comply with the radiated emission limits specified in Section 15.209(a). Frequency Limit 0.009 MHz – 0.490 MHz 2400/F(kHz) uV/m at 300m (1) 0.490 MHz – 1.705 MHz 24000/F(kHz) uV/m at 30m (1) 1.705 MHz – 30 MHz(3) 30 uV/m at 30m (1) 30 MHz – 88 MHz 100 uV/m (40.0 dBuV/m) at 3m (1) 88 MHz – 216 MHz 150 uV/m (43.5 dBuV/m) at 3m (1) 216 MHz – 960 MHz 200 uV/m (46.0 dBuV/m) at 3m (1) Above 960 MHz 500 uV/m (54.0 dBuV/m) at 3m (1) Above 1000 MHz 500 uV/m (54 dBuV/m) at 3m (2) 1 Limit is with Quasi Peak detector with bandwidths as defined in CISPR-16-1-1 2 Limit is with 1 MHz measurement bandwidth and using an Average detector, however, the peak field strength of any emission shall not exceed the maximum permitted average limits specified above by more than 20 dB under any condition of modulation. 3 Applies to 13.56 MHz intentional frequency. Based on ANSI C63.4 Section 4.2, if the Peak detector measurements do not exceed the Quasi-Peak limits, where defined, then the EUT is deemed to have passed the requirements. Page 13 of 27 Report Issued: 3/22/2019 Report File #: 7169003030FCC-001 © TÜV SÜD Canada Inc. This test report shall not be reproduced except in full, without written approval of TÜV SÜD Canada Inc

Client Dormakaba Canada Inc Product Quantam Pixel Lock RSS-210 Issue 9 Standard(s) FCC Part 15 Subpart 15.209 Typical Radiated Emissions Setup Measurement Uncertainty The expanded measurement uncertainty is calculated in accordance with CISPR 16-4-2 and is ±4.25dB for 30MHz – 1GHz and ±4.93dB for 1GHz – 18GHz with a 'k=2' coverage factor and a 95% confidence level. Preliminary Graphs The graphs shown below are maximized peak measurement graphs measured with a resolution bandwidth greater than or equal to the final required detector over a full 0-360°. This peaking process is done as a worst case measurement and enables the detection of frequencies of concern for final measurement. For final measurements with the appropriate detector, where applicable, please refer to the tables under Final Measurements. In accordance with FCC Part 15, Subpart A, Section 15.33, the device was scanned to the 10th harmonic or at least 1 GHz. Devices scanned may be scanned at alternate test distances and in accordance with FCC Part 15, Subpart A, Section 15.31, an extrapolation factor of 20 dB/decade was used above 30 MHz and 40 dB/decade below 30 MHz. For example for 1 meter measurements, an extrapolation factor 9.5 dB from 20 Log (1m / 3m) is applied. All three orthogonal axis were checked. However, the worst case graphs are presented. Page 14 of 27 Report Issued: 3/22/2019 Report File #: 7169003030FCC-001 © TÜV SÜD Canada Inc. This test report shall not be reproduced except in full, without written approval of TÜV SÜD Canada Inc

Client Dormakaba Canada Inc Product Quantam Pixel Lock RSS-210 Issue 9 Standard(s) FCC Part 15 Subpart 15.209 . See final measurement section for all measurements. 9 kHz to 150 kHz – Loop (Worst case position) Page 15 of 27 Report Issued: 3/22/2019 Report File #: 7169003030FCC-001 © TÜV SÜD Canada Inc. This test report shall not be reproduced except in full, without written approval of TÜV SÜD Canada Inc

Client Dormakaba Canada Inc Product Quantam Pixel Lock RSS-210 Issue 9 Standard(s) FCC Part 15 Subpart 15.209 150 kHz to 30 MHz-Loop (Worst case position) The worst case measurement as listed in the table below appeared at a Loop antenna position and a table azimuth as pictured in Appendix A. Peak Emissions vs. Quasi Peak Limit Table – Loop@0 degree Ant. Level Frequency Raw Att. Cable Amp Limit-3m Margin Pass/ (dB/m) (dBu (MHz) (dBuV) (dB) (dB) (dB ) (dBuV/m) (dB) Fail +51.5 b/m) 13.556 46.9 3 0.4 37.6 -28.5 59.4 69.5 10.6 Pass Page 16 of 27 Report Issued: 3/22/2019 Report File #: 7169003030FCC-001 © TÜV SÜD Canada Inc. This test report shall not be reproduced except in full, without written approval of TÜV SÜD Canada Inc

Client Dormakaba Canada Inc Product Quantam Pixel Lock RSS-210 Issue 9 Standard(s) FCC Part 15 Subpart 15.209 Vertical – Worst case Peak Emissions Graphs (13.56 MHz on) Note: CISPR 32 limits shown above, FCC limits applied in table. Page 17 of 27 Report Issued: 3/22/2019 Report File #: 7169003030FCC-001 © TÜV SÜD Canada Inc. This test report shall not be reproduced except in full, without written approval of TÜV SÜD Canada Inc

Client Dormakaba Canada Inc Product Quantam Pixel Lock RSS-210 Issue 9 Standard(s) FCC Part 15 Subpart 15.209 Final Measurements Emission Reading Table – Vertical- tx ON Frequency Det. Raw Ant. Att. Cab. Amp Level Limit Margin Pass/ (MHz) mode (dBuV) (dB/m) (dB) (dB) (dB ) (dBuV/m) (dBuV/m) (dB) Fail 298.473 PEAK 54.8 13.9 3 1.7 -33.3 40.1 46 5.9 Pass 271.286 PEAK 54.4 13.6 3 1.6 -33.3 39.3 46 6.7 Pass 162.829 PEAK 51.3 9.9 3 1.2 -33.4 32 43.5 11.5 Pass 596.853 PEAK 43.1 20.8 3 2.2 -33.2 35.9 46 10.1 Pass 623.846 PEAK 41.9 21.7 3 2.3 -33.2 35.7 46 10.3 Pass 217.106 PEAK 46 11.5 3 1.5 -33.3 28.7 46 17.3 Pass Emission Reading Table – Horizontal- tx ON Frequency Det. Raw Ant. Att. Cab. Amp Level Limit Margin Pass/ (MHz) mode (dBuV) (dB/m) (dB) (dB) (dB ) (dBuV/m) (dBuV/m) (dB) Fail 569.666 PEAK 46.1 20.2 3 2.2 -33.2 38.3 46 7.7 Pass 922.128 PEAK 39 24.6 3 2.8 -32.2 37.2 46 8.8 Pass 596.853 PEAK 44.2 20.8 3 2.2 -33.2 37 46 9 Pass 895.232 PEAK 39.8 23.7 3 2.8 -32.4 36.9 46 9.1 Pass 705.213 PEAK 40.2 22.6 3 2.4 -33 35.2 46 10.8 Pass 542.478 PEAK 40.1 21.1 3 2.1 -33.2 33.1 46 12.9 Pass Note: Quasi-peak measurements applied above were made with a quasi-peak or peak detector with the device continuously transmitting data. These measurements do not apply a duty cycle correction factor to the peak data to correct for the average measurement. Page 18 of 27 Report Issued: 3/22/2019 Report File #: 7169003030FCC-001 © TÜV SÜD Canada Inc. This test report shall not be reproduced except in full, without written approval of TÜV SÜD Canada Inc

Client Dormakaba Canada Inc Product Quantam Pixel Lock RSS-210 Issue 9 Standard(s) FCC Part 15 Subpart 15.209 Emission Reading Table – Vertical- tx OFF Frequency Det. Raw Ant. Att. Cab. Amp Level Limit Margin Pass/ (MHz) mode (dBuV) (dB/m) (dB) (dB) (dB ) (dBuV/m) (dBuV/m) (dB) Fail 82.671 Q.P 40.7 7.7 3 0.9 -28.5 23.8 40 16.2 Pass 56.869 PEAK 53.9 7.2 3 0.8 -28.5 36.4 40 3.6 Pass 875.549 PEAK 38.9 22.9 3 2.7 -28.4 39.1 46 6.9 Pass 30.194 PEAK 36 15.7 3 0.5 -28.5 26.7 40 13.3 Pass 46.684 PEAK 40.7 8 3 0.7 -28.5 23.9 40 16.1 Pass 305.48 PEAK 34.9 14 3 1.7 -28.6 25 46 21 Pass Emission Reading Table – Horizontal- tx OFF Frequency Det. Raw Ant. Att. Cab. Amp Level Limit Margin Pass/ (MHz) mode (dBuV) (dB/m) (dB) (dB) (dB ) (dBuV/m) (dBuV/m) (dB) Fail 875.743 PEAK 40 23.1 3 2.7 -28.4 40.4 46 7.1 Pass 81.507 PEAK 47.8 8 3 0.9 -28.5 31.2 40 9.3 Pass 189.468 PEAK 48 9.9 3 1.3 -28.5 33.7 43.5 6.8 Pass 30.97 PEAK 35.8 16.9 3 0.6 -28.5 27.8 40 12.7 Pass 57.742 PEAK 40 6.8 3 0.8 -28.5 22.1 40 18.4 Pass 136.409 PEAK 41.1 8.7 3 1.1 -28.5 25.4 43.5 15.1 Pass Note: Quasi-peak measurements applied above were made with a quasi-peak or peak detector with the device continuously transmitting data. These measurements do not apply a duty cycle correction factor to the peak data to correct for the average measurement. Page 19 of 27 Report Issued: 3/22/2019 Report File #: 7169003030FCC-001 © TÜV SÜD Canada Inc. This test report shall not be reproduced except in full, without written approval of TÜV SÜD Canada Inc

Client Dormakaba Canada Inc Product Quantam Pixel Lock RSS-210 Issue 9 Standard(s) FCC Part 15 Subpart 15.209 Last Next Equipment Model No. Manufacturer Calibration Calibration Asset # Date Date Spectrum Rhode & ESU 40 April 20, 2017 April 20, 2019 4092 Analyzer Schwarz Pre-Amp LNA-1450 RF Bay Inc. July 7, 2017 July 7, 2019 4089 Electro- Loop Antenna EM 6879 April 19, 2017 April 19, 2019 4040 Metrics Antenna bilog 3142-E ETS 2016-11-16 2018-11-16 4002 LMR-400- RF Cable 10m 10M-50OHM- LexTec NCR NCR 4025 MN-MN Emissions 0.1.94 Global EMC NCR NCR GEMC 58 Software Electro- Horn Antenna EM-6960 5/3/2017 5/3/2019 4062 Metrics Page 20 of 27 Report Issued: 3/22/2019 Report File #: 7169003030FCC-001 © TÜV SÜD Canada Inc. This test report shall not be reproduced except in full, without written approval of TÜV SÜD Canada Inc

Client Dormakaba Canada Inc Product Quantam Pixel Lock RSS-210 Issue 9 Standard(s) FCC Part 15 Subpart 15.209 Occupied Bandwidth Purpose The purpose of this test is to measure the bandwidth occupied. Limits No limit applies for 15.209. Method For the 20 dB or occupied BW, FCC KDB 558074, Section 2.0 references ANSI C63.10 for occupied bandwidth. ANSI C63.10 Section 6.9.1 was used for occupied bandwidth. Results For information purposes, the 99% occupied BW was measured to be: Mod Occupied BW (MHz) 88.7 kHz Graph(s) The graphs shown below shows the max hold on the spectrum analyzer and the highest resolution bandwidth that is sufficiently low to exhibit the occupied bandwidth of a channel during operation of the EUT. The worst case/representative bandwidth is presented of all low, middle and high channel. This measurement is a peak measurement. Max hold is performed for a duration of not less than 1 minute. Page 21 of 27 Report Issued: 3/22/2019 Report File #: 7169003030FCC-001 © TÜV SÜD Canada Inc. This test report shall not be reproduced except in full, without written approval of TÜV SÜD Canada Inc

Client Dormakaba Canada Inc Product Quantam Pixel Lock RSS-210 Issue 9 Standard(s) FCC Part 15 Subpart 15.209 Occupied Bandwidth Page 22 of 27 Report Issued: 3/22/2019 Report File #: 7169003030FCC-001 © TÜV SÜD Canada Inc. This test report shall not be reproduced except in full, without written approval of TÜV SÜD Canada Inc

Client Dormakaba Canada Inc Product Quantam Pixel Lock RSS-210 Issue 9 Standard(s) FCC Part 15 Subpart 15.209 Test Equipment List Last Next Equipment Model No. Manufacturer Calibration Calibration Asset # Date Date Spectrum Rhode & ESU 40 April 20, 2017 April 20, 2019 4092 Analyzer Schwarz Pre-Amp LNA-1450 RF Bay Inc. July 7, 2017 July 7, 2019 4089 Electro- Loop Antenna EM 6879 April 19, 2017 April 19, 2019 4040 Metrics Antenna bilog 3142-E ETS 2016-11-16 2018-11-16 4002 LMR-400- RF Cable 10m 10M-50OHM- LexTec NCR NCR 4025 MN-MN Emissions 0.1.94 Global EMC NCR NCR GEMC 58 Software Electro- Horn Antenna EM-6960 5/3/2017 5/3/2019 4062 Metrics Pre-Amp HP 8449B HP Oct 12, 2016 Oct 12, 2018 GEMC 6351 1 – 26.5 GHz Horn Antenna SAS-572 A.H. Systems Oct 11, 2016 Oct 11, 2018 GEMC 6371 18 – 26.5 GHz Page 23 of 27 Report Issued: 3/22/2019 Report File #: 7169003030FCC-001 © TÜV SÜD Canada Inc. This test report shall not be reproduced except in full, without written approval of TÜV SÜD Canada Inc

Client Dormakaba Canada Inc Product Quantam Pixel Lock RSS-210 Issue 9 Standard(s) FCC Part 15 Subpart 15.209 Appendix A – EUT Summary Page 24 of 27 Report Issued: 3/22/2019 Report File #: 7169003030FCC-001 © TÜV SÜD Canada Inc. This test report shall not be reproduced except in full, without written approval of TÜV SÜD Canada Inc

Client Dormakaba Canada Inc Product Quantam Pixel Lock RSS-210 Issue 9 Standard(s) FCC Part 15 Subpart 15.209 For further details for filing purposes, refer to filing package. General EUT Description Client Details Organization / Address Dormakaba Canada Inc 7301 Decarie Blvd H4P 2G7, Montreal, Canada EUT (Equipment Under Test) Details EUT Name (for report title) Quantam Pixel Lock EUT is powered using DC from host Input voltage range(s) (V) 5VDC Frequency range(s) (Hz) NA Rated input current (A) 500mA Nominal power consumption (W) 2.5W Number of power supplies in EUT 0 Transmits RF energy? (describe) Yes RFID (13.56 MHz) Basic EUT functionality RFID (13.56 MHz) description Modes of operation Customer to setup EUT on site? Yes I/O cable description N/A Specify length and type Peripherals required to exercise EUT Ex. Signal generator Note the EUT is considered to have been received the date of the commencement of the first test, unless otherwise stated. For a close-up picture of the EUT, see ‘Appendix B – EUT & Test Setup Photographs’.Note the EUT is considered to have been received the date of the commencement of the first test, unless otherwise stated. For a close-up picture of the EUT, see ‘Appendix B – EUT & Test Setup Photographs’. Page 25 of 27 Report Issued: 3/22/2019 Report File #: 7169003030FCC-001 © TÜV SÜD Canada Inc. This test report shall not be reproduced except in full, without written approval of TÜV SÜD Canada Inc

Client Dormakaba Canada Inc Product Quantam Pixel Lock RSS-210 Issue 9 Standard(s) FCC Part 15 Subpart 15.209 Appendix B – EUT and Test Setup Photos Page 26 of 27 Report Issued: 3/22/2019 Report File #: 7169003030FCC-001 © TÜV SÜD Canada Inc. This test report shall not be reproduced except in full, without written approval of TÜV SÜD Canada Inc

Client Dormakaba Canada Inc Product Quantam Pixel Lock RSS-210 Issue 9 Standard(s) FCC Part 15 Subpart 15.209 Note: For EUT and test setup photos, refer to the photo exhibit which has been separated from this test report. Page 27 of 27 Report Issued: 3/22/2019 Report File #: 7169003030FCC-001 © TÜV SÜD Canada Inc. This test report shall not be reproduced except in full, without written approval of TÜV SÜD Canada Inc


Document Created: 2019-03-22 13:31:06
Document Modified: 2019-03-22 13:31:06
© 2024 FCC.report
This site is not affiliated with or endorsed by the FCC