Quick Guide

FCC ID: RS2XMCK20

Users Manual

Download: PDF
FCCID_785079

1 2 3 4 Warnings XpressR Functions Using the 5-way Navigation Knob The XM antenna contains a strong magnet, allowing it to I When using this product it is always important to keep your eyes on the road and hands on the The knob not only rotates, but it toggles. To toggle the knob, press on the edge and in the stick to any metal parts of your vehicle. wheel. Not doing so could result in personal injury, death, and/or damage to your XpressR Receiver, direction you want to toggle. accessories, and/or to your vehicle or other property. 30-Minute Replay Buttons I XpressR should be placed in your vehicle where it will not interfere with the function of safety fea- Pause and replay up to 30 minutes of live XM broadcast. Magnet tures, e.g., deployment of airbags. Failure to correctly place XpressR may result in injury to you or Display others if the unit becomes detached during an accident and/or obstructs the deployment of an Changes the way content is airbag. viewed on the display. Power Button Press center button Toggle right Toggle left Toggle up Toggle down Step 2: Installing the Vent Mount or Swivel Mount What’s in the Box? XM Button (XM Button) Confirms selection for channel and menu items also press and Installing the vent mount hold to TuneSelect. Vehicle Installation To install the vent mount, find a horizon- Left and Right Arrows Step 1: Mounting the XM Antenna tal vent that is strong enough to hold info display menu Search for channels by category. your XpressR and car cradle. To remove mute + Mount the XM antenna to the roof or trunk of the vehicle. During installation, the vent mount, push it into the vent and 1 2 3 5-way Navigation Knob make sure you are outdoors and the antenna is not obstructed by tall buildings. lift upwards slightly to release the XpressR 4 5 6 Previews channels; also se- For best results mount the XM antenna to the outside of your vehicle. Below are 7 8 9 XM SureConnect lects various menu options. mount’s hooks from the vent vane. jump 0 p/d the recommended options Remote Control Cassette Adapter Menu op op Access advanced features tio tio and configuration options. n n 1 2 Car Cradle Swivel Mount Number Keys Info Jump Pres et/Direct Enter a channel di- Displays either your Switches between Selects between direct channel rectly or select your personal stock or info current channel and entry and up to 30 presets. Some parts of the vent mount can be adjusted to better suit favorite preset. extras information. previous channel. your vehicle’s vent. Car Power Adapter Vent Mount Keep excess cable XM Car Antenna Swivel Mount Preparation Kit behind or under the dashboard. 5 6 7 8 Installing the swivel mount You can orient your swivel different ways to accommodate the space available in your vehicle. Plug the antenna, the power adapter, and either the cassette adapter or the XM SureConnect into the Once you have all of the cables correctly connected you can lock your XpressR into the car cradle. car cradle as shown. The FM Direct Adapter is not pictured. To install the swivel mount, first find a suitable location. The swivel mount’s adhesive is very 1. Unlock the car cradle locking mechanism 2. Slide your XpressR into the car cradle strong and may be difficult to remove. Do not install this mount on leather surfaces and until it is in place. make sure the air temperature is at least 60°F (15°C). You can use either the XM Sure- Connect, the cassette adapter, XpressR Car Cradle or a mini audio cable (not in- You can adjust the tension of the cluded) in the line out. mount with a screwdriver 1. Clean the mounting surfaces with If you need to remove the mount, carefully lift the adhesive pad with your fingers the surface preparation kit. or a spoon. Warming with a hair dryer for several minutes will help soften the ad- hesive. Your swivel mount comes with an extra adhesive pad. XM Antenna Step 3: How to receive XM through your car stereo XM SureConnect or There are several methods of receiving XM through your car stereo 3. Slide the locking mechanism into place. This 4. If you haven’t already done so, hook the Cassette Adapter: Use the cassette adapter if your vehicle’s audio system has a built in cassette ensures that your XpressR always stays in place. car cradle to the mount. player. The cassette adapter will provide the best audio quality. 2. Peel away the adhesive liner and firmly press the swivel mount to XM SureConnect: You can listen to your XpressR through your car stereo by using XpressR’s built-in the surface for 30 seconds. Allow 24 hours before using the FM modulator and the XM SureConnect. Simply find an unused FM frequency on the stereo and set mount. your XpressR to transmit on that same frequency. For XM SureConnect install, please see your XM SureConnect installation guide. Professional Wired: The third option is the FM Direct Adapter (sold separately). We recommend professional installation if you choose to use this method of install. adhesive liner Audio input: Some vehicles come with an audio input jack. If your vehicle has this type of input you can simply use a mini audio cable (sold separately). Cassette Adapter Power Adapter

9 10 11 Step 4: Making your Vehicle’s FM Radio an XM radio. Basic Controls Using Presets Your XpressR contains a built-in FM modulator that transmits the XM audio signal to your vehicle’s There are 30 presets in all; each bank (A, B, and C) holds 10 presets. Press the “p/d” button to select FM radio. Turn on your XpressR. Subscribe to XM if you haven’t done so already. the proper bank. Use these banks to organize your favorite channels or to create separate preset banks for additional users to enjoy. To set a channel to a preset: First, turn on your car stereo. You will need to find a suitable FM frequency in order to get the best 1. Tune to the desired channel. sound. A suitable FM frequency is an unused frequency or weak station that is not located near a Selecting Channels strong FM station in your area. 2. Press the p/d button until the appropriate “Preset” bank (Preset A, B, or C) appears in the display. Rotate knob to scroll through the list of channels. Press the “XM” button to select that channel. You can also set up XpressR so that you do not have to press the “XM” button to select a channel. See 3. Press and hold the number key that corresponds to the preset you would like to set. XpressR Next, power on your XpressR. Be sure all of your cables are properly connected. Go to channel 1, this is the preview channel. You will not hear any sound through your car stereo until you have chosen “Direct Tune” in your user guide. beeps when the channel is stored. an FM Frequency. - OR – To select a stored preset: Press Menu ¨ FM Modulator ¨ FM Frequency. R Press the number keys on your Xpress or the remote that correspond to the channel number. 1. Press the p/d button until the appropriate “Preset” bank (Preset A, B, or C) appears in the display. - OR – 2. Press one of the number keys. XpressR will tune to that channel. Match the frequency to the frequency you see on your car’s FM radio R If you have channels assigned to presets, press a number key and Xpress will tune to the channel ® assigned to that number. Display FM Modulator > FM Freq Press the display button to change the way you view the content on the display. There are 4 88.1 different display modes. 88.3 88.5 Direct Entr y Direct 5:13 88.7 1. Press the p/d button until the word “Direct” appears in the display. XM Cafe 45 XM Cafe 45 88.9 2. Press the number keys corresponding to the channel number. For example, for channel 31, press 3 followed by 1. You can select the channel faster by pressing the XM button after entering the REM REM Drive Now you should be able to hear your XpressR through your FM stereo. If you can’t hear any sound channel number. Drive quick guide please check all of your connections and be sure your XM antenna is not obstructed Display mode 1 Display mode 2 (single channel) XMCK20 (single channel large font) 12 13 14 15 Direct 5:14 All Channels Direct 5:15 Previous Channel Navigating Replay Menu Options FCC Statement Please note that the power cable that has been supplied with your device is supplied with perma- XM Cafe 45 XMU 43 XM Cafe 45 Bluesville 74 1. Press the button. If a track has been playing for less than 5 seconds, Xpress R R When your Xpress is in the car cradle (and using either SureConnect or FM Direct accessory to nently attached ferrite beads. It is the responsibility of the user to use the power cable with the fer- REM Fred 44 REM B.B. King rewinds to the beginning of the previous track. If the track has been playing for transmit audio), and you press Menu, your display will look like this: rite beads. longer than 5 seconds, XpressR rewinds to the beginning of the current track. Upon Drive XM Cafe 45 Drive Take it Home entering the replay buffer, XpressR will display “Replay” on the display. Edit Alerts Stocks The user is cautioned that changes or modifications not expressly approved by XM Satellite Radio Change Display Top Tracks 46 Info Extras Inc. can void the user’s authority to operate this device. 2. Pressing the button again skips backward to previous track in the order they Ethel 47 played. XpressR allows you to access up to 30 minutes of previously listened to live This device complies with Part 15 of the FCC Rules. Operation is subject to the following two condi- Display mode 3 (split screen with 6 channels) Display mode 4 broadcast. Press and hold for 3 seconds to skip to the beginning of your replay list. tions: (1) This device may not cause harmful interference. (split screen with previous channel) FM Modulator Channel Access 3. Pressing the button skips forward in the track list. (2) this device must accept any interference received, including interference that may cause Change Display undesired operation. 4. To exit 30-Minute Replay and return to the live XM broadcast, press and hold the button for 3 seconds; XpressR will display “LIVE” on the display. This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection 30-Minute Replay against harmful interference in a residential installation. Exit Antenna Aiming This equipment generates, uses, and can radiate radio frequency energy and, if not installed and 30-Minute Replay gives you the opportunity to “hear that again.” This feature applies to the current To Pause a Track Factory Defaults Set Time listening session only. Turning your XpressR off removes all tracks from the up-to-30 minute buffer. used in accordance with the installation instructions, may cause harmful interference to radio com- 1. Press the button. The pause icon appears in the display. munications. However, there is no guarantee that interference will not occur in a particular installa- Both display modes 3 and 4 display a list of replayed tracks. To navigate through the "replay list", you tion. If this equipment does cause harmful interference to radio or television reception, which can Note: pressing the Menu or toggling the knob left, allows you to back out of any menu. be determined by turning the equipment off and on, the user is encouraged to try to correct the can either rotate the knob and press the XM button or press the replay buttons to make a 2. To resume playback from where you had paused, press the button again. selection. interference by one or more of the following measures: 3. To return to the live XM broadcast, press and hold the button until XpressR beeps and For more information on Menu Options, please refer to your XpressR user guide. displays “LIVE” on the screen. - Reorient or relocate the receiving antenna of the affected receiver. Display updates as Display mode 2 (single channel) - Increase the separation between the XM equipment and the affected receiver. new track begins. - Connect the XM equipment into an outlet on a circuit different from that to which the affected Customer Support Direct 4:30 receiver is connected. XM Cafe 45 Activate your XM subscription online http://activate.xmradio.com or by phone - Consult the dealer or an experienced radio/TV technician for help. Replay Status Bar represents the total replay session REM 1 800 XM RADIO (1-800-967-2346 ) Drive Displays total time of Warning: The FCC and FAA have not certified this Satellite Radio Receiver for use in any aircraft current track within the If your XpressR does not work the way you expect, first consult the troubleshooting section of (neither portable nor permanent installation). Therefore, XM Satellite Radio cannot support this Displays elapsed time of replay buffer. your XpressR user guide. If the problem persists please contact Listener Care at 1 800 XM RADIO type of application or installation current track within the re- 3:11 3:35 play buffer. (1-800-967-2346 ). Space between white bars represents tracks within total replay session.


Document Created: 2007-03-13 12:04:16
Document Modified: 2007-03-13 12:04:16
© 2024 FCC.report
This site is not affiliated with or endorsed by the FCC