OpDes and Module User Manual

FCC ID: QYLEMR116RC

Operational Description

Download: PDF
FCCID_3753131

Getac Digitizer Specification Model Name: EMR116 – UA00 Project Code: T082 Project PN: 441878300098

Contents 1. General .............................................................................................................................. 4 2. Product Specifications ..................................................................................................... 5 2.1 General Specifications .......................................................................................... 5 2.2 Dimensional Outline of PCBA and Sensor Film .................................................... 6 2.3 Electrical Specifications ........................................................................................ 7 2.3.1 Circuit Diagram .................................................................................................. 7 2.3.2 Host Interface Connector ................................................................................... 7 3. Recommended Operating Conditions ............................................................................ 8 4. Electrical Characteristics ................................................................................................. 8 4.1 Current Consumption ........................................................................................... 8

Revision History Revision Date Description Author /Revised by R00 2016/4/20 Draft for preliminary review James Wang

1. General  The intention of this document is to define the Getac EMR-UA00 Digitizer 11.6 inch battery free EM sensor unit.

2. Product Specifications 2.1 General Specifications Technology Electro-magnetic Resonance Interface USB VID & PID VID:2BAF, PID:0005 Active Area 267.3×152.9mm Resolution 0.01mm / 2560 LPI (see Note 5) Coordinate Accuracy ±0.4mm (see Note 1, 2, 3 and 5) Coordinate Jitters 1-point max (see Note 1 and 5) Detectable Pen tilt Up to 45° from vertical (see Note 5) Detectable Height 4 to 10mm above the Sensor Film (see Note 1, 3 and 5) Position Report Rate 120 pps Pressure Resolution 1024 levels (see Note 4 and 5) Stylus Button 1 button EM module Thickness 2.5mm max Note 1: The EM Sensor Board and Stylus at ordinary temperature. Note 2: The pen held vertically at 0mm high from sensor film. Note 3: See Picture1, the accuracy guaranteed region is 15mm or more inside region from the active area edge. Note 4: Pressure range is 20g≦200 levels and 650g≦1023 levels Note 5: This function must be used with EMPen Tiger Stylus unit Picture1

2.2 Dimensional Outline of PCBA and Sensor Film

2.3 Electrical Specifications 2.3.1 Circuit Diagram U C S O B N N PIC32MX250F128D Sensor Film C E Controller Board O C N T N O R 2.3.2 Host Interface Connector Connector Assignment Pin Name Function 8 NC Not Connect 7 USB- USB- Signal 6 USB+ USB+ Signal 5 NC Not Connect 4 NC Not Connect 3 NC Not Connect 2 VCC +5V Power Supply 1 GND Ground Note: Connector support for HIROSE ELECTRIC Company. Part NO: FH34SRJ-8S-0.5SH(50)

3. Recommended Operating Conditions Item Symbol Min. Typ. Max. Unit Remarks Supply voltage VDD 4.5V 5V 5.5V V Ambient temperature Celsius -40 25 60 ℃ Ambient humidity Percentage 40 60 85 % Notes “Typ.” Show the recommended value. 4. Electrical Characteristics 4.1 Current Consumption Item Min. Typ. Max. Unit. Remark Supply Voltage 4.5V 5V 5.5V V Current Consumption in Active (Center) 80 90 110 mA Current Consumption in Active (Edge ) 100 120 140 mA Current Consumption in Standby mode 130 150 170 mA


Document Created: 2018-02-09 15:35:54
Document Modified: 2018-02-09 15:35:54
© 2025 FCC.report
This site is not affiliated with or endorsed by the FCC