QYLEM7511A

FCC ID

Equipment: Radio Module

Getac Technology Corporation EM7511A

5F.,Building A,No.209,Sec.1 Nangang.,Rd.,, Taipei City, N/A 11568 Taiwan

Application
Frequency Range
Final Action Date
Granted
v6DwbFVbdcwlQbnWT68Fdw==
699.0-716.0
2019-04-24
APPROVED
v6DwbFVbdcwlQbnWT68Fdw==
777.0-787.0
2019-04-24
APPROVED
v6DwbFVbdcwlQbnWT68Fdw==
788.0-798.0
2019-04-24
APPROVED
v6DwbFVbdcwlQbnWT68Fdw==
814.0-824.0
2019-04-24
APPROVED
v6DwbFVbdcwlQbnWT68Fdw==
824.0-849.0
2019-04-24
APPROVED
v6DwbFVbdcwlQbnWT68Fdw==
1710.0-1755.0
2019-04-24
APPROVED
v6DwbFVbdcwlQbnWT68Fdw==
1710.0-1780.0
2019-04-24
APPROVED
v6DwbFVbdcwlQbnWT68Fdw==
1850.0-1910.0
2019-04-24
APPROVED
v6DwbFVbdcwlQbnWT68Fdw==
2496.0-2690.0
2019-04-24
APPROVED
v6DwbFVbdcwlQbnWT68Fdw==
2500.0-2570.0
2019-04-24
APPROVED
tBGATNErLNWJyfN2wPC1AA==
3550.0-3770.0
2019-04-12
APPROVED
0MelKrQ1mP0CBHDpqxdJGw==
699.0-716.0
2019-04-12
APPROVED
0MelKrQ1mP0CBHDpqxdJGw==
777.0-787.0
2019-04-12
APPROVED
0MelKrQ1mP0CBHDpqxdJGw==
788.0-798.0
2019-04-12
APPROVED
0MelKrQ1mP0CBHDpqxdJGw==
814.0-824.0
2019-04-12
APPROVED
0MelKrQ1mP0CBHDpqxdJGw==
824.0-849.0
2019-04-12
APPROVED
0MelKrQ1mP0CBHDpqxdJGw==
1710.0-1755.0
2019-04-12
APPROVED
0MelKrQ1mP0CBHDpqxdJGw==
1710.0-1780.0
2019-04-12
APPROVED
0MelKrQ1mP0CBHDpqxdJGw==
1850.0-1910.0
2019-04-12
APPROVED
0MelKrQ1mP0CBHDpqxdJGw==
2305.0-2315.0
2019-04-12
APPROVED
0MelKrQ1mP0CBHDpqxdJGw==
2496.0-2690.0
2019-04-12
APPROVED
0MelKrQ1mP0CBHDpqxdJGw==
2500.0-2570.0
2019-04-12
APPROVED
File NameDocument TypeDateDirect
Test Report WWANTest Report 2019-04-24 00:00:00 pdf
RF Exposure Appendix CRF Exposure Info 2019-04-24 00:00:00 pdf
RF Exposure Appendix BRF Exposure Info 2019-04-24 00:00:00 pdf
RF Exposure Appendix ARF Exposure Info 2019-04-24 00:00:00 pdf
RF ExposureRF Exposure Info 2019-04-24 00:00:00 pdf
Test Report PCB LTETest Report 2019-04-24 00:00:00 pdf
Test Report PCB LTE B26 part 90sTest Report 2019-04-24 00:00:00 pdf
Test Report PCB LTE B14Test Report 2019-04-24 00:00:00 pdf
Label Sample HostID Label/Location Info 2019-04-24 00:00:00 pdf
Label LocationID Label/Location Info 2019-04-24 00:00:00 pdf
POACover Letter(s) 2019-04-24 00:00:00 pdf
Confidentiality Request LetterCover Letter(s) 2019-04-24 00:00:00 pdf
Class II Permissive Change with Power ReductionCover Letter(s) 2019-04-24 00:00:00 pdf
Label infoID Label/Location Info 2019-04-12 00:00:00 pdf
FCC POACover Letter(s) 2019-04-12 00:00:00 pdf
Confidentiality (Short-term)Cover Letter(s) 2019-04-12 00:00:00 pdf
Change In FCC ID_Original GranteeCover Letter(s) 2019-04-12 00:00:00 pdf
Change In FCC ID_New GranteeCover Letter(s) 2019-04-12 00:00:00 pdf
External PhotosExternal Photos 2019-10-08 00:00:00 N/A
Internal PhotosInternal Photos 2019-10-21 00:00:00 N/A
User Manual HostUsers Manual 2019-10-21 00:00:00 N/A
Tune Up ProcedureParts List/Tune Up Info N/A
Test Setup Photos WWANTest Setup Photos 2019-10-21 00:00:00 N/A
Test Setup Photos PCB LTETest Setup Photos 2019-10-21 00:00:00 N/A
Test Setup Photos PCB LTE B14Test Setup Photos 2019-10-21 00:00:00 N/A
Test Setup Photos RF ExposureTest Setup Photos 2019-10-21 00:00:00 N/A
Operational Description Antenna SpecOperational Description N/A
Test Setup Photos PCB LTE B26 part 90sTest Setup Photos 2019-10-21 00:00:00 N/A

Application Details:

EquipmentRadio Module
FRN0018268243
Grantee CodeQYL
Product CodeEM7511A
Applicant BusinessGetac Technology Corporation
Business Address5F.,Building A,No.209,Sec.1 Nangang.,Rd., , Taipei City,N/A Taiwan 11568
TCB ScopeB1: Commercial mobile radio services equipment in the following 47 CFR Parts 20, 22 (cellular), 24,25 (below 3 GHz) & 27
TCB Email[email protected]
ApplicantKevin Chiang –
Applicant Phone 1142
Applicant Fax+886-2-26525865
Applicant Email[email protected]
Applicant MailStop
Test FirmSporton International Inc.
Test Firm ContactAlex CHEN
Test Firm Phone
Test Firm Fax+886-3-327-0978
Test Firm Email[email protected]
Certified ByJones Tsai – Director
Comment [0MelKrQ1mP0CBHDpqxdJGw==]: Power out is conducted at the antenna terminal. Single Modular Approval. Co-location of this module with other transmitters that operate simultaneously are required to be evaluated using the FCC multi-transmitter procedures. End-users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance. OEM integrators must insure that the end user has no manual instructions to remove or install this module. For mobile operating configurations the antenna gain, including cable loss, must not exceed the gains documented in this filing for, as defined in 2.1091 for satisfying RF exposure compliance. Under no conditions may an antenna gain be used that would exceed the ERP and/or EIRP power limits as specified in Part 22/24/27. The Grantee is responsible for providing the documentation required for modular use. This device has 1.4 MHz, 3 MHz, 5 MHz, 10 MHz, 15 MHz and 20 MHz bandwidth modes for LTE Bands 2/4/66; 1.4 MHz, 3 MHz, 5 MHz and 10 MHz bandwidth modes for LTE Bands 5/12; 1.4 MHz, 3 MHz, 5 MHz, 10 MHz and 15 MHz bandwidth modes for LTE Band 26; 5 MHz and 10 MHz bandwidth modes for LTE Bands 13/14/30; 5 MHz, 10 MHz, 15 MHz and 20 MHz bandwidth modes for LTE Bands 7/41. This device also supports CA UL on the LTE Bands 7/41.
Comment [tBGATNErLNWJyfN2wPC1AA==]: Power out is conducted at the antenna terminal. Single Modular Approval. Co-location of this module with other transmitters that operate simultaneously are required to be evaluated using the FCC multi-transmitter procedures. End-users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance. OEM integrators must insure that the end user has no manual instructions to remove or install this module. For mobile operating configurations the antenna gain, including cable loss, must not exceed the gains documented in this filing for, as defined in 2.1091 for satisfying RF exposure compliance. Under no conditions may an antenna gain be used that would exceed the EIRP power limits as specified in Part 96. The Grantee is responsible for providing the documentation required for modular use. This device supports LTE of 5, 10, 15, and 20 MHz bandwidth modes for FDD LTE Band 48.
Comment [v6DwbFVbdcwlQbnWT68Fdw==]: Class II Permissive Change. Limited Modular Approval: Adds portable use in Getac tablet, Model. A140. Disables LTE Bands 30 and 48 via software. Output Power is EIRP and ERP for above and below 1 GHz, respectively. The highest reported SAR for body and simultaneous transmission exposure conditions are 1.09 W/kg and 1.55 W/kg, respectively. This device must not be co-located or operating in conjunction with any other antenna or transmitter, except in accordance with FCC multi- transmitter evaluation procedures, or as documented in this filing. This device supports LTE of 1.4, 3, 5, 10, 15, and 20 MHz bandwidth modes for FDD LTE Bands 2, 4, and 66; LTE of 5, 10, 15, and 20 MHz bandwidth modes for FDD LTE Band 7; LTE of 1.4, 3, 5, and 10 MHz bandwidth modes for FDD LTE Bands 5 and 12; LTE of 5, and 10MHz bandwidth modes for FDD LTE Bands 13 and14; LTE of 1.4, 3, 5, 10, and 15 MHz bandwidth modes for FDD LTE Band 26; and LTE of 5, 10, 15, and 20 MHz bandwidth modes for TDD LTE Band 41.

© 2019 FCC.report
This site is not affiliated with or endorsed by the FCC