DSS3

FCC ID: QISKOB-W09

Test Report

Download: PDF
FCCID_3918835

FCC PART 15C TEST REPORT No. B18N00835-BT for HUAWEI Technologies Co., Ltd. HUAWEI MediaPad T3 Model Name: KOB-W09 With Hardware Version: REACHW-V1.0 Software Version: KOB-W09C331B002-log FCC ID: QISKOB-W09 Issued Date: 2018-06-20 Designation Number: CN1210 Note: The test results in this test report relate only to the devices specified in this report. This report shall not be reproduced except in full without the written approval of SAICT. Test Laboratory: Shenzhen Academy of Information and Communications Technology Building G, Shenzhen International Innovation Center, No.1006 Shennan Road, Futian District, Shenzhen, Guangdong, P. R. China 518026. Tel:+86(0)755-33322000, Fax:+86(0)755-33322001Email:yewu@caict.ac.cn.www.cszit.com

No. B18N00835-BT Page 2 of 17 REPORT HISTORY Report Number Revision Description Issue Date B18N00835-BT Rev.0 1st edition 2018-06-20

No. B18N00835-BT Page 3 of 17 CONTENTS CONTENTS .................................................................................................................................................. 3 1. TEST LABORATORY ......................................................................................................................... 4 1.1. TESTING LOCATION ......................................................................................................................... 4 1.2. TESTING ENVIRONMENT .................................................................................................................. 4 1.3. PROJECT DATA ................................................................................................................................. 4 1.4. SIGNATURE ...................................................................................................................................... 4 2. CLIENT INFORMATION ................................................................................................................... 5 2.1. APPLICANT INFORMATION ............................................................................................................... 5 2.2. MANUFACTURER INFORMATION ...................................................................................................... 5 3. EQUIPMENT UNDER TEST (EUT) AND ANCILLARY EQUIPMENT (AE) ............................. 6 3.1. ABOUT EUT .................................................................................................................................... 6 3.2. INTERNAL IDENTIFICATION OF EUT ................................................................................................ 6 3.3. INTERNAL IDENTIFICATION OF AE ................................................................................................... 6 3.4. GENERAL DESCRIPTION ................................................................................................................. 6 4. REFERENCE DOCUMENTS ............................................................................................................. 7 4.1. DOCUMENTS SUPPLIED BY APPLICANT ............................................................................................ 7 4.2. REFERENCE DOCUMENTS FOR TESTING ........................................................................................... 7 5. TEST RESULTS ................................................................................................................................... 8 5.1. SUMMARY OF TEST RESULTS ........................................................................................................... 8 5.2. TERMS USED IN THE RESULT TABLE ................................................................................................. 8 5.3. LABORATORY ENVIRONMENT .......................................................................................................... 9 6. TEST FACILITIES UTILIZED ........................................................................................................ 10 ANNEX A: MEASUREMENT RESULTS FOR RECEIVER .................................................................11 A.1 RADIATED EMISSION............................................................................................................................11 ANNEX B: TEST FIGURE LIST.............................................................................................................. 14 FIG. 1 RADIATED SPURIOUS EMISSION (8DPSK, CH0, 9 KHZ ~30 MHZ) ............................................ 14 FIG. 2 RADIATED SPURIOUS EMISSION (8DPSK, CH0, 30 MHZ ~1 GHZ) ............................................ 14 FIG. 3 RADIATED SPURIOUS EMISSION (8DPSK, CH0, 1 GHZ ~18 GHZ) ............................................ 15 FIG. 4 RADIATED SPURIOUS EMISSION (8DPSK, CH0, 18 GHZ ~26.5 GHZ) ....................................... 15 FIG. 5 RADIATED EMISSION POWER (8DPSK, CH0, 2380GHZ~2450GHZ) ......................................... 16 ANNEX C: PERSONS INVOLVED IN THIS TESTING ....................................................................... 17

No. B18N00835—BT SAjCT : Page 4 of 17 1. Test Laboratory 1.1. Testing Location Location: Shenzhen Academy of Information and Communications Technology Address: Building G, Shenzhen International Innovation Center, No.1006 Shennan Road, Futian District, Shenzhen, Guangdong Province ,China Postal Code: 518026 Telephone: +86(0)755—39322000 Fax: +86(0)755—33322001 1.2.Testing Environment Normal Temperature: 15—35°C Relative Humidity: 20—75% 1.3.Project data Testing Start Date: 2018—06—11 Testing End Date: 2018—06—20 1.4.Signature 441kt Lin Kanfeng (Prepared this test report) eits Tang Weisheng (Reviewed this test report) 894 Zhang Bojun (Approved this test report)

No. B18N00835-BT Page 5 of 17 2. Client Information 2.1. Applicant Information Company Name: Huawei Technologies Co., Ltd Administration Building, Huawei Base, Bantian, Longgang District, Address: Shenzhen City: Shenzhen Postal Code: 518129 Country: China Telephone: 15602311354 Fax: / 2.2. Manufacturer Information Company Name: Huawei Technologies Co., Ltd Administration Building, Huawei Base, Bantian, Longgang District, Address: Shenzhen City: Shenzhen Postal Code: 518129 Country: China Telephone: 15602311354 Fax: /

No. B18NO0835—BT Saict * Page 6 of 17 Equipment Under Test (EUT) and Ancillary Et ment (AE 3.1.About EUT Descripton HUAWEI MediaPod To Model Name kos—woo Market Name HUAWEI MediaPod To Frequency Band 2402NIHe—2400z Type of Medulation arska a porswenrse Number of Channels 7 rco in aiskos—woo Gondtion of EUT as reeaived. No obvious damage in appearance 3.2.Internal Identification of EUT EUT 1D® IMEL HW version SW version Recelve Date eut1 1 reachwevi.0 os—woscaste00210g 2ota.0s.1 "EUT ID is used to idently the tst sample in te lab ntemally Nate: Accorting to Huawei Technologies Go.,Lid descripion that Remove 9 grounding shragnel of the main board; Remove 5 Common mode Chcke and replace them wth 0 ohm resistance; Replace one high Q induetor with a laminated induetor and Remove 4 TVS. Else part have no changes C Band edge complance and Radiated Spurous Emissions test selected worst case needs to been performe. else resuls are oted from the intial model. The regort number for intial mode!is 817002338TRev.1 3.3 Internal Identification of AE AETD® Descrlpiion sn ae1 Charger 1 aco Charger 1 aco Charger 1 ae1 Mode Hweasoro0u01 Mandacturer sHeNzHeN Huntkey ELECTRoNIC Co..tp ace Mode Hweasoro0u01 Mandacturer HuizHou ayp ELECTRoNIC co., Lrp as Mode Hweasoro0u01 Mandacturer boneeuarHtex ELEcTRoNics co..cto *AE 1D is used to idenity the test sample in the lab ntemally 3.4.General Description The Equigment under Test (EUT) is a model of HUAWEI MedaPad Td wth integrated antenna and inbultbattry.Itsupports WLAN 802.11afaigh (Tn 20Mz and 40Eiz)function Manal and spefieations ofthe EUT were provided to fulll the tst Sarmples undergoing test were selecte by the cient

No. B18N00835-BT Page 7 of 17 4. Reference Documents 4.1. Documents supplied by applicant EUT feature information is supplied by the applicant or manufacturer, which is the basis of testing. 4.2. Reference Documents for testing The following documents listed in this section are referred for testing. Reference Title Version FCC Part15 FCC CFR 47, Part 15, Subpart C: Oct,2017 15.205 Restricted bands of operation; 15.209 Radiated emission limits, general requirements; 15.247 Operation within the bands 902–928MHz, 2400–2483.5 MHz, and 5725–5850 MHz ANSI C63.10 American National Standard for Testing Unlicensed Jun,2013 Wireless Devices

No. B18N00835-BT Page 8 of 17 5. Test Results 5.1. Summary of Test Results Sub-clause of No Test cases Verdict Part15C 1 Radiated Spurious Emission 15.247,15.205,15.209 P See ANNEX A and ANNEX B for details. 5.2. Terms used in the result table Terms used in Verdict column P Pass NA Not Available F Fail Abbreviations AC Alternating Current AFH Adaptive Frequency Hopping BW Band Width E.I.R.P. equivalent isotropic radiated power ISM Industrial, Scientific and Medical R&TTE Radio and Telecommunications Terminal Equipment RF Radio Frequency Tx Transmitter

No. B18N00835—BT s:ic znussmene Page 9 of 17 5.3 Laboratory Environment Sem—anecholo chamber l not excsed folowing Imis along the EMC testing Tempemiare Min. = 15 °C. Max. = 30 °C Relatve humeity Min. = 95 %, Max. = 60 % Shielcing effecivences ©.oraihe — thrz, »5008; Thz — 18000e, »0008 Eiectreal insulaton > 2 mo Ground sysem resisance <i0 Nomaised ste atenuaton (NSA) < *4d8. amtOm distance. from 30 t 1000 Mri Unfornity of held strength Gemeen 0 and 6 08. from 20 to 6000 Mriz Shielded room cid not exesed folowi ing imis along the EMC testing Tempemiare Min. 15 °C. Max. = 30 °C Relatve humeity Min. 95 %, Max. = 60 % Shielcing effecivences aoraline — 1Miz, 5080 Thikie — 1000MHz, »808. Eiectreal insulaton > 2 uo Ground sysem resisance <4 0 Fullyanechoie chamber cid not exesed following Imis along the EMC tesing Tempemiure Min. = 15 °C. Max. = 30 °C Relatve humeity Min. = 95 %, Max. = 60 % Shielcing effecivences ©.oraihe — thrz, »5008; Thikie — 1000MHz, »808. Eiectreal insulaton > 2 mo Ground sysem resisance <i0 Votage Starding Wave Rato <6d8, from 1 to 18 GHz,3m distance (vowe

No. B18N00835-BT Page 10 of 17 6. Test Facilities Utilized Radiated emission test system Serial Calibration Calibration NO. Equipment Model Manufacturer Number Due date Period 1 Loop Antenna HLA6120 35779 TESEQ 2019-05-02 3 years 2 BiLog Antenna VULB9163 9163 329 Schwarzbeck 2020-02-27 3 years 3 Horn Antenna 3117 00066577 ETS-Lindgren 2019-04-05 3 years 4 Test Receiver ESR7 101676 Rohde & Schwarz 2018-11-29 1 year Spectrum 5 FSV40 101192 Rohde & Schwarz 2019-05-22 1 year Analyser 6 Chamber FACT3-2.0 1285 ETS-Lindgren 2019-11-27 3 years QSH-SL-18- 7 Antenna 17013 Q-par 2020-01-15 3 years 26-S-20 QSH-SL-26- 8 Antenna 17014 Q-par 2020-01-15 3 years 40-K-20 Anechoic chamber Fully anechoic chamber by ETS-Lindgren Measurement uncertainty: Frequency Range uncertainty (dB) Note 9kHz-30MHz 1.84 30MHz-1GHz 4.90 k=2 1GHz-18GHz 5.32 18GHz-40GHz 4.66

No. B18N00835-BT Page 11 of 17 ANNEX A: MEASUREMENT RESULTS FOR RECEIVER A.1 Radiated Emission Measurement Limit: Standard Limit FCC 47 CFR Part 15.247, 15.205, 15.209 20dB below peak output power In addition, radiated emissions which fall in the restricted bands, as defined in § 15.205(a), must also comply with the radiated emission limits specified in § 15.209(a) (see § 15.205(c)). Limit in restricted band: Frequency of emission Measurement Field strength(µV/m) (MHz) distance(meters) 0.009-0.490 2400/F(kHz) 300 0.490-1.705 24000/F(kHz) 30 1.705-30.0 30 30 30-88 100 3 88-216 150 3 216-960 200 3 Above 960 500 3 Test Condition: The EUT was placed on a non-conductive table. The measurement antenna was placed at a distance of 3 meters from the EUT. During the tests, the antenna height and the EUT azimuth were varied in order to identify the maximum level of emissions from the EUT. This maximization process was repeated with the EUT positioned in each of its three orthogonal orientations. Frequency of emission RBW/VBW Sweep Time(s) (MHz) 30-1000 120kHz/300kHz 5 1000-4000 1MHz/3MHz 15 4000-18000 1MHz/3MHz 40 18000-26500 1MHz/3MHz 20 Note: According to the performance evaluation, the radiated emission margin of EUT is over 20dB in the band from 9kHz to 30MHz. Therefore, the measurement starts from 30MHz to tenth harmonic. The measurement results include the horizontal polarization and vertical polarization measurements. NOTE: The test cases are selected as the worst cases for every conditions.

No. B18N00835-BT Page 12 of 17 Measurement Results: Mode Channel Frequency Range Test Results Conclusion 9 kHz ~30 MHz Fig.1 P 30 MHz ~1 GHz Fig.2 P 0 8DPSK 1 GHz ~18 GHz Fig.3 P 18 GHz ~26.5 GHz Fig.4 P Power(CH0) 2.38 GHz ~ 2.45 GHz Fig.5 P

No. B18N00835-BT Page 13 of 17 8DPSK CH0 (1-18GHz) Frequency MaxPeak Limit Margin Pol Corr. (MHz) (dBµV/m) (dBµV/m) (dB) (dB) 13953.500000 57.42 74.00 16.58 V 19.7 14556.000000 58.47 74.00 15.53 V 20.4 15558.500000 59.00 74.00 15.00 H 20.9 16276.000000 59.32 74.00 14.68 H 21.7 16730.500000 59.57 74.00 14.43 V 21.9 17908.000000 58.20 74.00 15.80 H 23.9 Frequency Average Limit Margin Pol Corr. (MHz) (dBµV/m) (dBµV/m) (dB) (dB) 13970.500000 45.31 54.00 8.69 H 19.6 14556.500000 46.40 54.00 7.60 V 20.4 15575.000000 46.61 54.00 7.39 V 21.0 15650.500000 47.51 54.00 6.49 V 21.3 16639.500000 47.38 54.00 6.62 V 22.5 17703.500000 46.68 54.00 7.32 V 22.9 See ANNEX B for test graphs. Conclusion: Pass

No. B18N00835-BT Page 14 of 17 ANNEX B: TEST FIGURE LIST Fig. 1 Radiated Spurious Emission (8DPSK, Ch0, 9 kHz ~30 MHz) Fig. 2 Radiated Spurious Emission (8DPSK, Ch0, 30 MHz ~1 GHz)

No. B18N00835-BT Page 15 of 17 Fig. 3 Radiated Spurious Emission (8DPSK, Ch0, 1 GHz ~18 GHz) Fig. 4 Radiated Spurious Emission (8DPSK, Ch0, 18 GHz ~26.5 GHz)

No. B18N00835-BT Page 16 of 17 Fig. 5 Radiated Emission Power (8DPSK, Ch0, 2380GHz~2450GHz)

No. B18N00835-BT Page 17 of 17 ANNEX C: Persons involved in this testing Test Name Tester Radiated Spurious Emission Lin Kanfeng, Tang Weisheng ***END OF REPORT***


Document Created: 2018-07-02 11:11:35
Document Modified: 2018-07-02 11:11:35
© 2024 FCC.report
This site is not affiliated with or endorsed by the FCC