User Manual Part III

FCC ID: QDMPPM42

Users Manual

Download: PDF

FCCID_4244966

User Guide

Safety Device

Pre- When a plug is inserted into the earphones, 2.5mm balanced,
or USB port, do not apply any force or impact to the plug.
Cautions Do not insert any metal objects (coins, hairpins, etc.) or
flammable debris into the device.
Do not put heavy objects on the device.
If the device gets wet (rain, water, chemicals, medicine,
cosmetics, sweat, moisture, etc.), allow the device to dry
thoroughly before powering on. Contact the nearest IRIVER
Customer Support Center for service. (Damage may not
be repairable, however if deemed repairable, any damage
due to liquid exposure will be repaired for an additional
fee even if the device is under warranty.)
Avoid exposing the device to direct sunlight or extreme
temperatures (0℃ - +40℃) such as the
inside of a car during the summer.
Do not store or use in hot and humid places such as saunas.
Avoid places with excessive dust, or smoke.
Do not use for extended periods on blankets, electric
blankets, or carpet.
Do not place near a fire or in a microwave.
Never disassemble, repair, or alter the product.
Do not store for extended periods in a confined space with
the power on.
Do not place the device near magnetic objects (magnets,
televisions, monitors, speakers, etc.).
Do not let chemicals or detergents come in contact with
the product since they may damage the surface and paint.
Do not drop or expose the product to strong impacts
(places where there is strong vibration. etc.).
Do not press multiple buttons simultaneously.
Do not disconnect the USB Type-C cable during data transfer.
When connecting the device to a computer with the USB Type-C
cable, use a USB port on the back of the computer for best results.

Miscellaneous 53

User Guide

Connecting the cable to a defective or damaged USB port
on a computer may damage the device.
Displaying one image for an extended period may cause
screen burn-in (afterimage).
Using poor quality protective films or adhesive stickers
on the screen may cause damage.
Do not insert any foreign objects into the device ports.
The device may become warm while playing and charging,
so handle it carefully.
Product’s corners may be sharp, so handle carefully.

Other

Do not use earphones/headphones or use the device while
operating any type of vehicle. It is not only dangerous,
but may be a violation of the law in certain regions.
Do not use the product during physical activities (driving,
walking, hiking, etc.).
Always use in a safe environment to avoid the risk of an
accident.
When using the device while moving, make sure the area
is free of obstacles.
Avoid using the device during thunderstorms to reduce
the possibility of electric shock.
If there is a ringing in the ears, reduce the volume or stop
using the device.
Do not listen to music at excessive volumes for extended periods.
Do not use earphones/headphones at excessive volumes.
Make sure that the headphone/earphone does not get stuck
in another object or get caught between other objects.
Do not sleep with earphones in your ears or leave them in
for extended periods.

Miscellaneous 54

User Guide

7. A file does not play, or the product becomes unstable
when a certain file is played.
File may be damaged or corrupt if the following occurs:
Playback stops or freezes.
Device may act erratically or freeze.
File may sound different on another device.
There may be a difference in the performance of
playback or other functions.
There may be differences in the file specs.
Converting the file to a different format or use of a different
file is recommended.

Copyright IRIVER Limited retains the rights to patents, trademarks,
copyrights, and other intellectual property rights related to
this manual. No contents of this user manual may be
duplicated or reproduced in any format or by any means
without the prior approval of IRIVER.
Using or reproducing, in whole or part, the contents of this
document is subject to penalties. Software, audio, video,
and any other copyrighted contents are protected in
accordance with relevant copyright laws.
The user accepts all legal responsibility for the unauthorized
reproduction or distribution of the copyrighted contents from
this product.
Companies, organizations, products, people, and events used
in the examples are fictional. IRIVER has no intention to be
associated with any company, institution, product, person, or
incident through this instruction book, and no such inference
should be made. It is the responsibility of the user to comply
with applicable copyright laws.
©1999~2019 IRIVER Limited. All rights reserved.

The PPM42 was designed and audio-tuned under the
advisement of MSD.

Miscellaneous 56

User Guide

Certifica- KC / FCC / CE / TELEC
Class B Device (Communication equipment for residential
tions use): This is a Class B Device and is registered for EMC
requirements for residential use. This device can be used in
residential areas and all other areas.

FCC ID: QDMPPM42
This device complies with Part 15 of the FCC Rules, Operation is
subject to the following two conditions: (1) this device may not cause
harmful interference, and (2) this device must accept any
interference received, including interference that may cause
undesired operation.

FCC Caution: Any changes or modifications not expressly
approved by the party responsible for compliance could void
the user's authority to operate this equipment.
This equipment complies with RF exposure requirements set forth for
an uncontrolled environment.

b) For a Class B digital device or peripheral, the instructions furnished
the user shall include the following or similar statement, placed in a
prominent location in the text of the manual: NOTE: This equipment has
been tested and found to comply with the limits for a Class B digital
device, pursuant to part 15 of the FCC Rules. These limits are designed
to provide reasonable protection against harmful interference in a
residential installation.
This equipment generates, uses and can radiate radio frequency
energy and, if not installed and used in accordance with the
instructions, may cause harmful interference to radio communications.
However, there is no guarantee that interference will not occur in a
particular installation. If this equipment does cause harmful
interference to radio or television reception, which can be determined
by turning the equipment off and on, the user is encouraged to try to
correct the interference by one or more of the following measures:

- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that
to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.

Miscellaneous 57

User Guide

Body-Worn Operation
This device was tested for typical body-worn operations with the back
of the portable music player kept 5mm from the body. To maintain
compliance requirements, use only belt-clips, holsters or similar
accessories that maintain a 5mm separation distance between the
user’s body and the back of the portable music player, including the
antenna. The use of belt-clips, holsters and similar accessories should
not contain metallic components in its assembly. The use of
accessories that do not satisfy these requirements may not comply
with CE RF exposure requirements, and should be avoided.
Body-worn accessory exposure conditions “Specific information must
be included in the operating manuals to enable users to select
body-worn accessories that meet the minimum test separation
distance requirements. Users must be fully informed of
the operating requirements and restrictions, to the extent that the
typical user can easily understand the information, to acquire the
required body-worn accessories to maintain compliance. Instructions
on how to place and orient a device in body-worn accessories, in
accordance with the test results, should also be included in the user
instructions. All supported body-worn accessory operating
configurations must be clearly disclosed to users through conspicuous
instructions in the user guide and user manual to ensure unsupported
operations are avoided. All body-worn accessories containing metallic
components must be tested for compliance and clearly identified in the
operating manual. The instruction must inform users to avoid using
other body-worn accessories containing metallic components to
ensure RF exposure compliance.”

Registered Windows 7, Windows 8, Windows 10, and Windows Media Player
are registered trademarks of Microsoft Corp.
Trademarks

MQA (Master Quality Authenticated) is an award-winning British
technology that delivers the sound of the original master recording.
The master MQA file is fully authenticated and is small enough to
stream or download. Visit mqa.co.uk for more information.

Miscellaneous 58

Document Created: 2019-04-18 16:06:35
Document Modified: 2019-04-18 16:06:35

© 2024 FCC.report
This site is not affiliated with or endorsed by the FCC