user manual

FCC ID: Q9SAWR-D6000

Users Manual

Download: PDF
FCCID_4316606



USER NOTICES e Do not modify or attempt to adjust this transceiver for any SAFETY: reason. e Do not expose the transceiver to direct sunlight for long periods The user should be aware of and understand the general hazards , nor place it close to a heat source. in operating a two—way radio transceiver. We cannot guarantee e Do not place the transceiver in a dusty, humid or wet area, nor the safety and operation of our transceiver with aftermarket place on unstable surface. accessories unless they have been tested and sold by us. e If an abnormal odor or smoke is detected coming from the Our transceiver should be maintained and serviced by a qualified transceiver, switch OFF immediately and remove the battery pack two—way radio dealer and their technical staff. Failure to do so from the transceiver. Contact your dealer. may violate our warranty. WARNING: How to use this user manual This manual introduces the basic operation of Kydera compatible No two—way radio transceiver including ours shall be operated DMR / Analog handheld transceiver. including powered on in hazardous areas such as explosive Your dealer or system administrator may have already perset the atmospheres including Inflammable gas, dust particles, metallic features of this radio based on your operational requirements. powders, grain dust, etc. This shall include confined spaces where Please consult with your dealer or system administrator about the these hazards exist, in areas where blasting or blasting products details. are in use or stored, and while fueling at refueling centers. In any The icons below are used for distinguishing between analog and of these conditions or where hazards exist, the transceiver shall digital features. be powered off. @ This icon indicates the function is only available in Analog PRECAUTIONS mode Observe the following precautions to prevent fire, personal injury @ This icon indicates the function is only available in Digital and transceiver damage. mode





When the radio is used for the first time without Type Features Description charging, there may be a low battery alert. Please turn @® Radio Revive Revive a target radio that has been remotely disabled it off and charge before use. @ Radio Detection Determine if targeted radio is active Charge the battery with following steps below: @® Radio Kill Disable targeted radio remotely 1. Plug the Type C connector of the power cable into the USB @ Remote Monitor Covert activation of targeted radios transmitter charging jack on the back of the battery. without local indicators. 2. Plug the power supply into a power outlet @ Encryption On/Off Turn on/off encryption 3. The LED charging indicator at the bottom of the battery indicates Emergency On/Off Initiate an emergency alarm mode or call the charging status. ® rgency based on programmed preset. Charger LED Indicators Current Status Contacts List Direct access to the programmed contact list Monitor Always monitor the selected channel until disabled. @ Red Charging Zone Switch Changes from selected Zone to new Zone @ Green Standby (No load) or Fully charged Scan On/Off Turn scanning on/off Programmable Keys VOX On/Off Switch between VOX On and Off. ® Short Press: press and release quickly (programmable range Backlight On/Off Tum backlight On/Off is from 50ms—750ms). Keypad Lock Switch between keypad lock and unlock. ® Long Press: press and hold for programmed time length High /Low Power Switch transmit power between high and low power (programmable range is from 500ms—5000ms). Switch between Man Down alarm On and Man Down On/Off Off (Optional) Programmable Functions Scan Mode Switch between SE/TO/CO mode If desired, the following terminal features can be preset for Repeater /Talk Around| Switch between Repeater and Talk Around Mode programmable keys: SMS Quick access to SMS


Transmit / Receiving ICONS The following icon appears on the radio screen to indicate the Basic operations radio status. Icon Operation instruction 5(6 Mode| Type |ICON Terminal product status Turn on: turn the [Power/Volume] knob clockwise i —» Sending a private call until you hear "click" Pri II Turn off: turn the [Power/Volume] knob @® rivate ca i 4« Receiving a private call counterclockwise until you hear a click @ |Group call 44 ——» Sending a group call After power on, rotate the [Power/Volume] knob k P M «& Receiving an group call to increase or decrease the volume 4ih —— Sending an All Call After power on, press [A¥ ] or [ W ] to select your @® All Call dA — Receiving an All Call f desired channel or frequency. i\ n Sending an analog transmission ® C i\ 4n Receiving an analog transmission PTT call To ensure an optimal transmission, hold the radio in a vertical position at one to two inches (2.5 to 5.0 centimeters) away from the mouth. Digital channel call Digital calls are made as a group call, private call or All Call based on the programming of the radio. An individual channel may be preset to one of these calling functions.



Document Created: 2019-06-13 16:01:28
Document Modified: 2019-06-13 16:01:28
© 2024 FCC.report
This site is not affiliated with or endorsed by the FCC