Test Report_20180214_v1 - 1711TW0103-U9-RF Exposure Report

FCC ID: Q9DAPIN0303

RF Exposure Info

Download: PDF
FCCID_3759391

MRT Technology (Taiwan) Co., Ltd Report No.: 1711TW0103-U9 Phone: +886-3-3288388 Report Version: V01 Web: www.mrt-cert.com Issue Date: 11-18-2017 RF Exposure Evaluation Declaration FCC ID: Q9DAPIN0303 APPLICANT: Hewlett Packard Enterprise Company Application Type: Certification Product: ACCESS POINT Model No.: APIN0303 Trademark: , FCC Classification: Digital Transmission System (DTS) Unlicensed National Information Infrastructure (UNII) Reviewed By : ( Paddy Chen ) Approved By : ( Chenz Ker ) The test results relate only to the samples tested. The test results shown in the test report are traceable to the national/international standards through the calibration of the equipment and evaluated measurement uncertainty herein. The test report shall not be reproduced except in full without the written approval of MRT Technology (Taiwan) Co., Ltd. FCC ID: Q9DAPIN0303 Page Number: 1 of 6

Report No.: 1711TW0103-U9 Revision History Report No. Version Description Issue Date Note 1711TW0103-U9 Rev. 01 Initial report 11-18-2017 Valid FCC ID: Q9DAPIN0303 Page Number: 2 of 6

Report No.: 1711TW0103-U9 1. PRODUCT INFORMATION 1.1. Equipment Description Product Name ACCESS POINT Model No. APIN0303 Brand Name: , Wi-Fi Specification: 802.11a/b/g/n/ac Bluetooth Specification: v4.0 single mode Software Version: v1.02 Operating Temperature: 0 ~ 40 °C Power Type: POE input or AC adapter input Operating Environment: Indoor Use Components Adapter Part No.: SDI30-12-U-P209-C1 Model No.: SDI30-12-U Input Power: 100 - 240V ~ 50/60Hz, 1.0A Output Power: 12VDC/2.5A Note: The applicant provide one POE adapter (Manufacturer: MICROSEMI & Model: PD-9001GR/AT/AC) for approval testing, it is not for sale. FCC ID: Q9DAPIN0303 Page Number: 3 of 6

°T Report No.: 1711TW0103—U9 1.2. Antenna Description Wi—Fi Internal Antenna 2.4 2.1 3.01 2.1 5.11 PCB 5 5.7 3.01 5.7 8.71 Bluetooth Internal Antenna PCB 2.4 4.5 —— Note: 1. The EUT supports Cyclic Delay Diversity (CDD) mode, and CDD signals are correlated. For CDD transmissions, directional gain is calculated as follows, Nayr = 2. Nss = 1. If all antennas have the same gain, Gayy, Directional gain = Gayy + Array Gain, where Array Gain is as follows. + For power spectral density (PSD) measurements on all devices, Array Gain = 10 log (Nayy/ Nsg) dB = 3.01; * For power measurements on IEEE 802.11 devices, Array Gain = 0 dB for Nayt S 4; 2. The EUT also supports Beam Forming mode, and the Beam Forming support 802.11n/ac, not include 802.11a/big. FCC ID: QgDAPINO303 Page Number: 4 of 6

Report No.: 1711TW0103-U9 2. RF Exposure Evaluation 2.1. Limits According to FCC 1.1310: The criteria listed in the following table shall be used to evaluate the environment impact of human exposure to radio frequency (RF) radiation as specified in 1.1307(b) LIMITS FOR MAXIMUM PERMISSIBLE EXPOSURE (MPE) Frequency Range Electric Field Magnetic Field Power Density Average Time 2 (MHz) Strength (V/m) Strength (A/m) (mW/cm ) (Minutes) (A) Limits for Occupational/ Control Exposures 300-1500 -- -- f/300 6 1500-100,000 -- -- 5 6 (B) Limits for General Population/ Uncontrolled Exposures 300-1500 -- -- f/1500 6 1500-100,000 -- -- 1 30 f= Frequency in MHz Calculation Formula: Pd = (Pout*G)/(4*pi*r2) Where Pd = power density in mW/cm2 Pout = output power to antenna in mW G = gain of antenna in linear scale Pi = 3.1416 r = distance between observation point and center of the radiator in cm Pd is the limit of MPE, 1mW/cm². If we know the maximum gain of the antenna and the total power input to the antenna, through the calculation, we will know the distance r where the MPE limit is reached. FCC ID: Q9DAPIN0303 Page Number: 5 of 6

Report No.: 1711TW0103-U9 2.2. Test Result of RF Exposure Evaluation Product ACCESS POINT Test Item RF Exposure Evaluation Antenna Gain: Refer to clause 1.2. Test Mode Frequency Band Maximum EIRP Power Density at Limit (MHz) (dBm) R = 20 cm (mW/cm2) (mW/cm2) BLE 2402 ~ 2480 9.53 0.0018 1 802.11b/g/n 2412 ~ 2462 27.08 0.1013 1 5180 ~ 5240 5260 ~ 5320 802.11a/n/ac 30.41 0.2186 1 5500 ~ 5720 5745 ~ 5825 CONCULISON: Both of the WLAN 2.4GHz Band, WLAN 5GHz Band and BLE Band can transmit simultaneously. The max Power Density at R (20 cm) = 0.0018mW/cm2 + 0.1013mW/cm2 + 0.2186mW/cm2 = 0.3217mW/cm2 < 1mW/cm2 Therefore, the Min Safety Distance is 20cm. The End FCC ID: Q9DAPIN0303 Page Number: 6 of 6


Document Created: 2018-02-06 15:54:21
Document Modified: 2018-02-06 15:54:21
© 2024 FCC.report
This site is not affiliated with or endorsed by the FCC