Label

FCC ID: PY7BC051022

ID Label/Location Info

Download: PDF
FCCID_670127

1 (5) Confidential MARKING DRAWING Prepared (also subject responsible if other) No. GBFA/SEM/BMD/TP Pam Wood 151 86 - KRD 104 1030 Uen Approved Checked Date Rev Reference GBFA/SEM/BMD/U (Michael Bower) 2006-02-16 A 151 86-KRD 104 1030 Rev A.doc Marking Drawing Type 1051022-BV series Label The label used for marking is defined in the Manufacturing Specification on the SVF 930 2460. Placing The label shall be placed on the back of the module according to the Assembly Drawing (151 88) for the KRD. Print layout


2 (5) Confidential Prepared (also subject responsible if other) No. GBFA/SEM/BMD/TP Pam Wood 151 86 - KRD 104 1030 Uen Approved Checked Date Rev Reference GBFA/SEM/BMD/U (Michael Bower) 2006-02-16 A 151 86-KRD 104 1030 Rev Definitions Line 1 Sony Ericsson trademark 2 Industry Canada marking 3 FCC approval marking 4 IMEI number as bar code 5 IMEI number as characters 6 Type number 7a KRD number, R-state 7b Product Name “GS64” 8a Marking of origin 8b Production Week as bar code 9 Approval Mark Sony Ericsson trademark Sony Ericsson and the Sony Ericsson trademark shall be according to the corporate standard 190 89-EN/LZT 108 5347. Height min. 2 mm. Industry Canada marking Industry Canada approval marking: consists of text: IC: 4170B-BC051022 Approval marks FCC approval marking: consists of the text: FCC ID: PY7BC051022 Within a frame with height > 1.5 mm. IMEI number as bar code See below for definition of IMEI-number. The bar code shall only contain the digits of the IMEI number (no -). IMEI number as The IMEI number has format: characters TAC - SNR - CD TAC = First eight digits of the Type Approval code after assignment from the Notified Body. Refer to table 1 below. SNR = A serial number from 000 000 to 999 999 according to factory allocation. Refer to table 1 below. CD = A check digit, from 0-9, calculated according to the Luhn formula (ISO/IEC 7812), GSM 02.16.

3 (5) Confidential Prepared (also subject responsible if other) No. GBFA/SEM/BMD/TP Pam Wood 151 86 - KRD 104 1030 Uen Approved Checked Date Rev Reference GBFA/SEM/BMD/U (Michael Bower) 2006-02-16 A 151 86-KRD 104 1030 Rev Type number The type number is BAC-1051022-xx and shall be printed “Type BAC-1051022-xx”. Refer to table 1 below. KRD number The KRD number for the product (including any variant number e.g. “/12”). Refer to table 1 below. R-state The R-state for the KRD according to the 1095 for the KRD. Product Name Text “GS64”. Type Size 1.5mm (min). Manufacturing country Marking of origin shall be printed “Made in Mexico” for modules produced in Celestica. “Made in Taiwan” for modules produced in Tecom. Production week The production week shall be given as yyWww (yy = year, ww = week) Table 1 KRD variant Type Number IMEI TAC code IMEI SNR Allocated factory / 10 BAC-1051022-AA tbd 000000 to 099999 tbd / 20 BAC-1051022-AB tbd 000000 to 099999 tbd / 40 BAC-1051022-CA tbd 000000 to 099999 tbd / 50 BAC-1051022-CB tbd 000000 to 099999 tbd

4 (5) Confidential Prepared (also subject responsible if other) No. GBFA/SEM/BMD/TP Pam Wood 151 86 - KRD 104 1030 Uen Approved Checked Date Rev Reference GBFA/SEM/BMD/U (Michael Bower) 2006-02-16 A 151 86-KRD 104 1030 Rev Print regulations The printing shall be legible and permanent. Other texts, which are not defined above, have the following characteristics: Typeface: ZPL II standard font D Type size: min 1.1 mm Line spacing: min 1.5 mm Trademark: min 1.5 mm Approval marks: min 5.0 mm

5 (5) Confidential Prepared (also subject responsible if other) No. GBFA/SEM/BMD/TP Pam Wood 151 86 - KRD 104 1030 Uen Approved Checked Date Rev Reference GBFA/SEM/BMD/U (Michael Bower) 2006-02-16 A 151 86-KRD 104 1030 Rev Print layout for prototypes Line 2 is replaced with text with alternative shown below. Type size min. 5 mm. PROTOTYPE EP1 PROTOTYPE EP2 PROTOTYPE FP1 PROTOTYPE FP2 etc. Note: Refer to build Exemption and/or the Build Entry Request (BER) for the proper naming convention for the prototype Build. Line 3 is replaced with text "NOT FCC or TYPE APPROVED". Text height min 2 mm. Line 4 and 5: IMEI-numbers as barcode and IMEI-numbers as characters shall be filled with the test IMEI number. The test IMEI number is in the following ranges: from 00460101-777000 to 00460101-778999 00460101-960000 to 00460101-961999 (the CD number must be added) Line 9 is left blank


Document Created: 2006-06-19 10:06:41
Document Modified: 2006-06-19 10:06:41
© 2024 FCC.report
This site is not affiliated with or endorsed by the FCC