Label Location

FCC ID: PY7-RD0071

ID Label/Location Info

Download: PDF
FCCID_2521963

Company Internal 1(4) Specification Document number Revision 1 Prepared by Date HW PM Torbjörn Samuelsson 2013-12-20 Contents responsible if other than preparer Remarks This document is handled in SPACE Approved by HW PM Torbjörn Samuelsson • Type number: RD-0071 • FCC id: PY7-RD0071 • IC id: 4170B-RD0071 Specification Core Unit Marking Contents 1 Printing information............................................................................ 2 2 Contents and positioning of laser etch printing .................................. 2 2.1 Contents ............................................................................................ 2 2.2 Positioning of printing ........................................................................ 3 3 REVISION INFORMATION ............................................................... 4 Abstract This document describes the label printing for Everest (SmartBand 2, SWR12) 1291-1904

Company Internal 2(4) Specification Document number Revision 12 1 1 Printing information The printing is laser etched in a grey color. The printing shall be sharp and well readable and shall withstand wearing. 2 Contents and positioning of laser etch printing 2.1 Contents The label shall have the following content, Position and alignment may vary: RTL type Position Text Align Note Commercial name Top cover Model: SWR12 3,5pt Shall be used for MP only Top cover 1291-1904.x 3,5pt X = revision for MP Type: RD-XXXX EFF Top cover Type: RD-0071 AAA 3,5pt E=HW version FF=SW version Three blank spaces between the Type No. and EFF Top cover FCC ID: PY7-RD0071 3,5pt Top cover IC: 4170B-RD0071 3,5pt Top cover NFC icon height: 3.0mm Isolation zone: 1.5mm Top cover Made in China 3,5pt Top cover yyWww 3,5pt yy = production year ww = production week Top cover BDA: XXXXXXXXXXXX 3,5pt actual unique BT address S/N: YYWWPSLCXXXXXXC Note 1 Top cover 3,5pt Size: 1.0x9.5mm Japanese Lithium Ion battery statement Top cover , Telec number. JATE not needed Top cover Symbol size: 3.0mm Symbol size: 3mm, text 1mm height text 3,5pt

Company Internal 3(4) Specification Document number Revision 12 1 CE-mark, symbol height 5.0mm Top cover height: 5.0mm height: 1.0mm for numbers RCM height: 3.0mm RCM compliance mark: Top cover Oceania (Australia, New Zeeland, Fiji, Papa New Guinea) Recycling WEEE icon Top cover height:5.0 ref.doc. 1003-0743 width:4.5 Min size: 5mm height of cross Note1: Serial No according to below: YYWWPSLCXXXXXXC YY = Year WW = Week of production P = Product Code S = Supplier Site (D for Goertek) L = Production Line XXXXXX = Serial value C = Checksum (in two positions) 2.2 Positioning of printing The logotype, text and safety approval symbols mentioned under content shall be placed on the top surface on the module.

Company Internal 4(4) Specification Document number Revision 12 1 3 REVISION INFORMATION Version Date Note 1 Development revision


Document Created: 2013-12-20 00:00:00
Document Modified: 2015-01-23 16:32:16
© 2024 FCC.report
This site is not affiliated with or endorsed by the FCC