User Manual-WAC540

FCC ID: PY318300427

Users Manual

Download: PDF
FCCID_4165415

Mount the Access Point on a Drop Ceiling 6. Hold the access point upside down and attach it to the mounting plate. Before mounting the access point, first set up and test the access point to verify WiFi network connectivity. Ceiling and Wall-Mount Guide Note: If you are mounting the access point on a hard ceiling, use the wall mounting instructions on the other side of this document. 1. Slide the T-bar partially into the metal bracket. 2. Attach the metal bracket to the ceiling bar. NETGEAR Insight Managed 3. Push the T-bar over the ceiling bar. 4. Use the lock screw to lock the metal Smart Cloud Wireless Access Point (WAC540) bracket into place. 7. Twist the access point clockwise to lock it onto the mounting plate. AC3000 802.11ac Wave 2 Tri Radio Ceiling and Wall-Mount Kit Contents Mounting plate 5. Use the four short screws to attach the mounting plate to the T-bar. 8. Cable the access point to your network. 3 tall screws and anchors for wall mounting Metal bracket with T-bar, lock screw, and 4 short screws

Mount the Access Point on a Wall Support 1. Place the mounting plate on the wall. Thank you for purchasing this NETGEAR product. You can visit 2. Mark the wall where the mounting holes are. www.netgear.com/support to register your product, get help, access the latest downloads and user manuals, and join our community. We recommend that you 3. Use the wall anchors and screws to attach use only official NETGEAR support resources. the mounting plate to the wall. Si ce produit est vendu au Canada, vous pouvez accéder à ce document en français canadien à https://www.netgear.com/support/download/. 4. Attach the access point to the mounting (If this product is sold in Canada, you can access this document in Canadian plate. French at https://www.netgear.com/support/download/.) For regulatory compliance information including the EU Declaration of Conformity, visit https://www.netgear.com/about/regulatory/. See the regulatory compliance document before connecting the power supply. Do not use this device outdoors. If you connect cables or devices that are outdoors to this device, see https://kb.netgear.com/000057103 for safety and warranty information. 5. Twist the access point clockwise to lock it onto the mounting plate. © NETGEAR, Inc., NETGEAR and the NETGEAR Logo NETGEAR, Inc. NETGEAR INTL LTD are trademarks of NETGEAR, Inc. Any non‑NETGEAR 350 East Plumeria Drive Building 3, University Technology Centre December 2018 trademarks are used for reference purposes only. San Jose, CA 95134, USA Curraheen Road, Cork, Ireland


Document Created: 2019-02-11 16:17:29
Document Modified: 2019-02-11 16:17:29
© 2024 FCC.report
This site is not affiliated with or endorsed by the FCC