User Manual rev.pdf

FCC ID: PY315200316

Users Manual

Download: PDF
FCCID_2804132

Quick Start Guide 1

Welcome Thank you for choosing Arlo. Getting started is easy. 2 3

What’s Included 1 Plug In Your Camera Connect one end of the USB cable to the port on the camera. Plug the other end of the USB cable into the adapter. Plug the USB adapter into a wall socket and wait for the camera LED to blink amber. USB cable USB power adapter Arlo Q camera TOP 4 Mounting screws Wall-mount plate 4 5

2 Get the App 3 Get a New Account Already have an account? See Add Devices to an Existing For the best experience, download the Arlo app for your Account on page 8. smartphone by scanning the QR code below or searching for “Arlo” in the app store. Launch the app from Or from a computer, visit your smartphone and https://arlo.netgear.com/#/login tap the New System and click the New System Setup Setup button. Follow the button. Select Arlo Q. onscreen instructions. https://arlo.netgear.com 6 7

Add Devices to an Existing Account 4 Connect Your Camera Follow the onscreen instructions from either the Arlo app or from Launch the Arlo app and log in to your account. a computer to connect your camera directly to your WiFi router. Tap the Add Device button, select Arlo Q, and follow the onscreen Note: If you own an Arlo wire-free system, do not connect your instructions. Arlo Q camera to the Arlo base station. 8 9

5 Place or Mount Your Camera You can place your camera on a shelf or other flat surface, or If you are mounting the camera on a wall, place the wall plate you can mount it on the wall. and secure it in place with four screws. Slide the camera into the wall plate. Note: The camera base includes a magnet that can help position a camera on a metal surface. 10 11

You’re Done! Camera LED Guide Congratulations! Your Arlo camera is set up and ready to go. Solid amber Solid blue Solid purple The camera is The camera is The camera is To view useful tutorial videos, find troubleshooting tips, or get support, booting up. powered on and is connected to a WiFi connected to Arlo network however it visit http://support.arlo.com. servers. is not connected to the Internet. Slow blinking Slow blinking Blinking purple amber blue The camera is too The camera is The camera is far away from the powered on and is connecting to a router. ready for setup. WiFi network. Fast blinking Fast blinking Blinking blue/ amber blue amber The camera is not The camera is A firmware update connected to a connecting to Arlo is in progress. DO WiFi network yet. servers. NOT TURN OFF THE CAMERA. Off The camera is powered off. 12 13

Notes Notes 14 15

©NETGEAR, Inc., NETGEAR, the NETGEAR Logo, and Arlo are trademarks of NETGEAR, Inc. Compliance For the current EU Declaration of Conformity, visit http://kb.netgear.com/app/answers/detail/a_id/11621/. For regulatory compliance information, visit http://www.netgear.com/about/regulatory/. 350 East Plumeria Drive San Jose, CA 95134, USA September 2015 16

Federal Communication Commission Interference Statement This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one of the following measures: - Reorient or relocate the receiving antenna. - Increase the separation between the equipment and receiver. - Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. - Consult the dealer or an experienced radio/TV technician for help. FCC Caution: Any changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate this equipment. This transmitter must not be co-located or operating in conjunction with any other antenna or transmitter. Radiation Exposure Statement: This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with minimum distance 20cm between the radiator & your body.

Industry Canada statement: This device complies with RSS-247 of the Industry Canada Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Ce dispositif est conforme à la norme CNR-247d'Industrie Canada applicable aux appareils radio exempts de licence. Son fonctionnement est sujet aux deux conditions suivantes: (1) le dispositif ne doit pas produire de brouillage préjudiciable, et (2) ce dispositif doit accepter tout brouillage reçu, y compris un brouillage susceptible de provoquer un fonctionnement indésirable. Caution : (i) the device for operation in the band 5150-5250 MHz is only for indoor use to reduce the potential for harmful interference to co-channel mobile satellite systems; (ii) high-power radars are allocated as primary users (i.e. priority users) of the bands 5250-5350 MHz and 5650-5850 MHz and that these radars could cause interference and/or damage to LE-LAN devices. Avertissement: les dispositifs fonctionnant dans la bande 5 150-5 250 MHz sont réservés uniquement pour une utilisation à l’intérieur afin de réduire les risques de brouillage préjudiciable aux systèmes de satellites mobiles utilisant les mêmes canaux; (ii) De plus, les utilisateurs devraient aussi être avisés que les utilisateurs de radars de haute puissance sont désignés utilisateurs principaux (c.-à-d., qu’ils ont la priorité) pour les bandes 5 250-5 350 MHz et 5 650-5 850 MHz et que ces radars pourraient causer du brouillage et/ou des dommages aux dispositifs LAN-EL. Radiation Exposure Statement: This equipment complies with IC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with minimum distance 20cm between the radiator & your body. Déclaration d'exposition aux radiations: Cet équipement est conforme aux limites d'exposition aux rayonnements IC établies pour un environnement non contrôlé. Cet équipement doit être installé et utilisé avec un minimum de 20 cm de distance entre la source de rayonnement et votre corps.


Document Created: 2015-11-05 11:29:15
Document Modified: 2015-11-05 11:29:15
© 2024 FCC.report
This site is not affiliated with or endorsed by the FCC