Label_Loc

FCC ID: PV7-WIBEAR11N-DF1

ID Label/Location Info

Download: PDF
FCCID_2237978

                                                                                        WiBear11n Data Sheet
                                                                                                Version 1.18


The internal / external antenna(s) used for this module must provide a separation distance of at least 20 cm
from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter.

NOTE: The outside of final product that contain a WiBear11n module must display in a user accessible area a
label referring to the enclosed module. This exterior label can use wording such as the following: “Contains
                                              2
Transmitter Module IC ID: 7738A-WB11NSF1” or “Contains IC ID: 7738A-WB11NSF1”.

IMPORTANT: The approval type for the WiBear11n variants is a limited modular approval due to the absence
of a shielding. Due to Industry Canada Modular Approval Requirements (Source: RSS-Gen / Issue 3 / Dec.
2010) any application which includes the WiBear11n module must be approved by the module manufacturer
(lesswire AG). The application manufacturer must provide design data for the review procedure.

Approved Antennas List
For Bluetooth and WLAN operation in the 2.4 GHz band, the module has been tested and approved for use
with the antenna listed in the table below.
Table 17: Approved antennas list, single-band operation

Model Name                Manufacturer and description                              Gain [dBi]
2450AT45A100              Johanson Technology, Chip antenna, 2400 – 2500 MHz        3.0 (peak)

For Bluetooth, WLAN operation in the 2.4 GHz band, and WLAN operation in the 5 GHz band, the module has
been tested and approved for use with the antenna listed in the table below.
Table 18: Approved antennas list, dual-band operation

Model Name                Manufacturer and description                              Gain [dBi]
A10194                    Antenova, dual-band SMD antenna, 2.4 – 2.5 GHz and        1.8 (peak)
                          4.9 – 5.9 GHz

The module may be integrated with other antennas which the OEM installer must authorize with respective
regulatory agencies and after approval of the module manufacturer.

FCC and IC IDs
Table 19: FCC and IC IDs for WiBear11n module variants

Model                    Model number      FCC ID                      IC ID
WiBear11n-SF1            AN00J93170        PV7-WIBEAR11N-SF1           7738A-WB11NSF1
WiBear11n-SF2            AN00J93174        PV7-WIBEAR11N-SF2           7738A-WB11NSF2
WiBear11n-DF1            AN00J93172        PV7-WIBEAR11N-DF1           7738A-WB11NDF1
WiBear11n-DF2            AN00J93176        PV7-WIBEAR11N-DF2           7738A-WB11NDF2

Label
Due to the small module size, the FCC and IC IDs cannot be displayed on the label. The corresponding FCC
and IC IDs for the module variants are shown in the table above.




 Copyright © 2013 lesswire AG                       www.lesswire.com                              Page 18 of 20


                                                                      WiBear11n Data Sheet
                                                                              Version 1.18


Label drawing:                                    Label location:




                                Figure 15: Label and label location




 Copyright © 2013 lesswire AG            www.lesswire.com                      Page 19 of 20



Document Created: 2013-12-19 13:30:18
Document Modified: 2013-12-19 13:30:18

© 2024 FCC.report
This site is not affiliated with or endorsed by the FCC