SAR Test Setup

FCC ID: PQC-OBTRNSBV1

RF Exposure Info

Download: PDF
FCCID_3811497

Annex C Photo documentation Appendix to Test Report No.: 1-2856/16-01-02-A D-PL-12076-01-03 BNetzA-CAB-02/21-102 Testing Laboratory CTC advanced GmbH Untertuerkheimer Strasse 6 – 10 66117 Saarbruecken/Germany Phone: + 49 681 5 98 - 0 Fax: + 49 681 5 98 - 9075 Internet: http://www.ctcadvanced.com e-mail: mail@ctcadvanced.com Accredited Test Laboratory: The testing laboratory (area of testing) is accredited according to DIN EN ISO/IEC 17025 (2005) by the Deutsche Akkreditierungsstelle GmbH (DAkkS) The accreditation is valid for the scope of testing procedures as stated in the accreditation certificate with the registration number: D-PL-12076-01-03 © CTC advanced GmbH Page 1 of 8

Test report no.: 1-2856/16-01-02-A Photo 1: Measurement System DASY 5 Photo 2: DUT - front view © CTC advanced GmbH Page 2 of 8

Test report no.: 1-2856/16-01-02-A Photo 3: DUT - right side view Photo 4: DUT - rear view © CTC advanced GmbH Page 3 of 8

Test report no.: 1-2856/16-01-02-A Photo 5: Test position front side body worn with 10 mm distance Photo 6: Test position rear side body worn with 0 mm distance © CTC advanced GmbH Page 4 of 8

Test report no.: 1-2856/16-01-02-A Photo 7: Test position left side body worn with 0 mm distance Photo 8: Test position right side body worn with 0 mm distance © CTC advanced GmbH Page 5 of 8

Test report no.: 1-2856/16-01-02-A Photo 9: Test position bottom side body worn with 0 mm distance Photo 10: Antenna dimensions and separation distances SRR1 WLAN SRR2 OBR © CTC advanced GmbH Page 6 of 8

Test report no.: 1-2856/16-01-02-A Photo 11: Body worn use position Photo 12: Limb-worn use position © CTC advanced GmbH Page 7 of 8

Test report no.: 1-2856/16-01-02-A Photo 13: Belt clip Photo 14: Belt clip © CTC advanced GmbH Page 8 of 8


Document Created: 2018-03-22 14:55:41
Document Modified: 2018-03-22 14:55:41
© 2024 FCC.report
This site is not affiliated with or endorsed by the FCC