RF Exposure Report

FCC ID: PPD-QCA9008-SBD1

Test Report

Download: PDF
FCCID_2718225

REPORT NO: 15U20374-E1A DATE: AUGUST 11, 2015 802.11ad MODULE FCC ID: PPD-QCA9008-SBD1 9. RF EXPOSURE FCC RULES §15.255 (g) Regardless of the power density levels permitted under this section, devices operating under the provisions of this section are subject to the radiofrequency radiation exposure requirements specified in §§1.1307(b), 2.1091 and 2.1093 of this chapter, as appropriate. Applications for equipment authorization of devices operating under this section must contain a statement confirming compliance with these requirements for both fundamental emissions and unwanted emissions. Technical information showing the basis for this statement must be submitted to the Commission upon request. §1.1310 The criteria listed in Table 1 shall be used to evaluate the environmental impact of human exposure to radio-frequency (RF) radiation as specified in §1.1307(b), except in the case of portable devices which shall be evaluated according to the provisions of §2.1093 of this chapter. Page 49 of 55 UL VERIFICATION SERVICES INC FORM NO: CCSUP4701I 47173 BENICIA STREET, FREMONT, CA 94538, USA TEL: (510) 771-1000 FAX: (510) 661-0888 This report shall not be reproduced except in full, without the written approval of UL Verification Services Inc..

Worst—case possible Integrated Band Power, assuming unwanted emissions encompassthe entie band and the powerdensity at every frequuency is equal tothe spurious emissions average limit Band star Bstop Tuimt Limit Limit R&w [Num Intervals integrated Band Power (CBs (mits) |(dBow/m at am) }(cem eine) (mw eire) Iimito (stop:star)/irew) Iimw eine) fso o as mte sol se ao ssal soissseos! oa) seo nood fls to 21ie Ees ass s1.] ecreossecos) oa) 1220 o03 frssto aco mie BoWes) as asal r2orzsta0s) oa) zaao 0 J to2000 mite sso| 2000 sa aral zsosreeos) oa) aco o5 [tto a0 oz 1000! 20000 ss s02]_osissscos) i 20000 272 [somite to o ce 2s integrated Band Power, equal tothe sum of the powerofall measured emisions within the band. Unwanted amissons measurements are peat,thus will over—estimate the average leve. Fundamental emissions measurements are average Frea or gand ETChannel [actual Emissions [actual power Integrated Band Power lc (com eine) (mw eiro) (mw eiro) ese 1 lsoro 200 itz 1 oas 2 ssasss lsoro 200 itz 2 es 3 zezo lsoro 00 ie : "Total integrated Band Power, eaual tothe worstcase possible 20 Milz to40 Gite band power plusthe measured 40 to 200 Gite band power Band ETChannel Integrated Band Power (mw eino) fs mite to 200 itz 1 zon Bs miteto 200 Gite 2 sseeu! {somite to 200 itz : ziss

REPORT NO: 15U20374-E1A DATE: AUGUST 11, 2015 802.11ad MODULE FCC ID: PPD-QCA9008-SBD1 CALCULATIONS EIRP is converted to Power Density using the equation: PD = EIRP / (4 * Pi * DS^2) where: PD = power density in mW/m^2 EIRP = Equivalent Isotropic Radiated Power in mW DS = separation distance in cm RESULTS FOR FUNDAMENTAL EMISSIONS Channel Average Average Separation Power FCC EIRP EIRP Distance Density Limit (dBm) (mW) (cm) (mW/cm^2) (mW/cm^2) 1 23.7 234.423 20 0.05 1 2 29.8 954.993 20 0.19 1 3 28.7 741.310 20 0.15 1 UPPER BOUND RESULTS FOR BOTH FUNDAMENTAL AND UNWANTED EMISSIONS Channel Integrated Separation Power FCC EIRP Distance Density Limit (mW) (cm) (mW/cm^2) (mW/cm^2) 1 238.278 20 0.05 1 2 958.847 20 0.19 1 3 745.165 20 0.15 1 Page 51 of 55 UL VERIFICATION SERVICES INC FORM NO: CCSUP4701I 47173 BENICIA STREET, FREMONT, CA 94538, USA TEL: (510) 771-1000 FAX: (510) 661-0888 This report shall not be reproduced except in full, without the written approval of UL Verification Services Inc..


Document Created: 2019-09-29 23:04:29
Document Modified: 2019-09-29 23:04:29
© 2024 FCC.report
This site is not affiliated with or endorsed by the FCC