SAR APPENDIX C1

FCC ID: PPD-AR5BHB116

RF Exposure Info

Download: PDF
FCCID_1778514

Report No. M120812_FCC_AR5BHB116_SAR_2.4 Page 44 of 67 APPENDIX C CALIBRATION DOCUMENTS 1. SN: 1380 Probe Calibration Certificate 2. SN: D2450V2 Dipole Calibration Certificate 3. SN: 442 DAE3 Data Acquisition Electronics Calibration Certificate Accredited for compliance with ISO/IEC 17025. The results of the test, calibrations and/or measurement included in this document are traceable to Australian/national standards. NATA is a signatory to the ILAC Mutual Recognition Arrangement for the mutual recognition of the equivalence of testing, calibration and inspection reports. This document shall not be reproduced except in full.

Calibration Laboratory of $\"> Schweizerischer Kalibrierdienst )& lotet a® Schmid & Partner Service suisse d‘étalonnage Engineering AG Servizio svizzero di taratura «oi Zeughausstrasse 43, 8004 Zurich, Switzerland (yra Swiss Calibration Service 8 riatibe® Accredited by the Swiss Accreditation Service (SAS) Accreditation No.: SCS 108 The Swiss Accreditation Service is one of the signatories to the EA Multilateral Agreementfor the recognition of calibration certificates Client EMC Technologies Certificate No: ET3—1380_Dec11 CALIBRATION CERTIFICATE Object ET3DV6 — SN:1380 R Calibration procedure(s) QA CAL—01.v8, QA CAL—12.v7, QA CAL—23.v4, QA CAL—25.v4 Calibration procedure for dosimetric E—field probes Calibration date: December 12, 2011 This calibration certificate documents the traceability to nationalstandards, which realize the physical units of measurements (S1). The measurements and the uncertainties with confidence probability are given on the following pages and are part of the certificate. All calibrations have been conducted in the closed laboratory facility: environment temperature (22 + 3)°C and humidity < 70%. Calibration Equipment used (M&TE critical for calibration) Primary Standards ID Cal Date (Certificate No.) Scheduled Calibration Power meter E44198 GB41293B874 31—Mar—11 (No. 217—01372) Apr—12 Power sensor E4412A MY41498087 31—Mar—11 (No. 217—01372) Apr—12 Reference 3 dB Attenuator SN: $5054 (3c) 29—Mar—11 (No. 217—01369) Apr—12 Reference 20 dB Aftenuator SN: $5086 (20b) 29—Mar—11 (No. 217—01367) Apr—12 Reference 30 dB Aftenuator SN: $5129 (30b) 29—Mar—11 (No. 217—01370) Apr—12 Reference Probe ES3DV2 SN: 3013 29—Dec—10 (No. ES3—3013_Dec10) Dec—11 DAE4 SN: 654 3—May—11 (No. DAE4—654_May11) May—12 Secondary Standards ID Check Date (in house) Scheduled Check RF generator HP 8648C US3642U01700 4—Aug—99 (in house check Apr—11) In house check: Apr—13 Network Analyzer HP 8753E US37390585 18—Oct—01 (in house check Oct—11) In house check: Oct—12 Name Function Signature Calibrated by: Jeton Kastrati Laboratory Technician Approved by: Katja Pokovic Technical Manager /ZZ/6 6 s S; 2 Issued: December 12, 2011 This calibration certificate shall not be reproduced except in full without written approval of the laboratory. Certificate No: ET3—1380_Dec11 Page 1 of 11

Calibration Laboratory of l 1 SS\/724 Schweizerischer Kalibrierdienst Schmid & Partner iE‘ ME”E;: Service suisse d‘étalonnage Engineering AG ;///—_\\\; Servizio svizzero di taratura Zeughausstrasse 43, 8004 Zurich, Switzerland 'f/,‘//;\\\ w Swiss Calibration Service Alitabe® Accredited by the Swiss Accreditation Service (SAS) Accreditation No.: SCS 108 The Swiss Accreditation Service is one of the signatories to the EA Multilateral Agreementfor the recognition of calibration certificates Glossary: TSL tissue simulating liquid NORMx,.y,z sensitivity in free space ConvF sensitivity in TSL / NORMx,y,z DCP diode compression point CF crest factor (1/duty_cycle) of the RF signal A, B,C modulation dependentlinearization parameters Polarization q ip rotation around probe axis Polarization 8 8 rotation around an axis that is in the plane normal to probe axis (at measurement center), Le., 8 = 0 is normal to probe axis Calibration is Performed According to the Following Standards: a) IEEE Std 1528—2003, "IEEE Recommended Practice for Determining the Peak Spatial—Averaged Specific Absorption Rate (SAR) in the Human Head from Wireless Communications Devices: Measurement Techniques", December 2003 b) IEC 62209—1, "Procedure to measure the Specific Absorption Rate (SAR) for hand—held devices used in close proximity to the ear (frequency range of 300 MHz to 3 GHz)", February 2005 Methods Applied and Interpretation of Parameters: e NORMx,y,z: Assessed for E—field polarization 8 = 0 (f < 900 MHz in TEM—cell; f > 1800 MHz: R22 waveguide). NORMx,y,z are only intermediate values, i.e., the uncertainties of NORMx,y,z does not affect the E®—field uncertainty inside TSL (see below ConvF). * NORM(A)x,y,z = NORMx,y,z * frequency_response (see Frequency Response Chart). This linearization is implemented in DASY4 software versions later than 4.2. The uncertainty of the frequency response is included in the stated uncertainty of Conv. * DCPx,y,z: DCP are numerical linearization parameters assessed based on the data of power sweep with CW signal (no uncertainty required). DCP does not depend on frequency nor media. * PAR: PAR is the Peak to Average Ratio that is not calibrated but determined based on the signal characteristics e Axy,z; Bxy.z; Cxy,z, VRx,y,z: A, B, C are numerical linearization parameters assessed based on the data of power sweep for specific modulation signal. The parameters do not depend on frequency nor media. VR is the maximum calibration range expressed in RMS voltage across the diode. * ConvF and Boundary Effect Parameters: Assessed in flat phantom using E—field (or Temperature Transfer Standard for f < 800 MHz) and inside waveguide using analytical field distributions based on power measurements for f > 800 MHz. The same setups are used for assessment of the parameters applied for boundary compensation (alpha, depth) of which typical uncertainty values are given. These parameters are used in DASY4 software to improve probe accuracy close to the boundary. The sensitivity in TSL corresponds to NORMx,y,z * ConvF whereby the uncertainty corresponds to that given for ConvF. A frequency dependent ConvF is used in DASY version 4.4 and higher which allows extending the validity from + 50 MHz to + 100 MHz. * Spherical isotropy (3D deviation from isotropy): in a field of low gradients realized using a flat phantom exposed by a patch antenna. e Sensor Offset: The sensor offset corresponds to the offset of virtual measurement center from the probe tip (on probe axis). No tolerance required. Certificate No: ET3—1380_Dect1 Page 2 of 11 Acreuaceho. sse

ET3DVE — SN:1380 December 12, 2011 Probe ET3DVGO SN:1380 Manufactured: August 16, 1999 Calibrated: December 12, 2011 Calibrated for DASY/EASY Systems (Note: non—compatible with DASY2 system!) Certificate No: ET3—1380_Dec11 Page 3 of 11

ET3DV6— SN:1380 December 12, 2011 DASY/EASY — Parameters of Probe: ET3DVG6 — SN:1380 Basic Calibration Parameters Sensor X Sensor Y Sensor Z Une (k=2) Norm (pV/(V/m)z)A 1.68 1.60 1.72 £10.1 % DCP (mV)" 93.1 92.7 94.2 Modulation Calibration Parameters UID Communication System Name PAR A B c VR Unc® dB dB dB mV (k=2) 10000 CW 0.00 x 0.00 0.00 1.00 137.2 £3.0 % Y 0.00 0.00 1.00 129.6 Z 0.00 0.00 1.00 103.8 The reported uncertainty of measurement is stated as the standard uncertainty of measurement multiplied by the coverage factor k=2, which for a normal distribution corresponds to a coverage probability of approximately 95%. * The uncertainties of NormX,Y,Z do not affect the E*—field uncertainty inside TSL (see Pages 5 and 6). ® Numerical linearization parameter: uncertainty not required. © Uncertainty is determined using the max. deviation from linear response applying rectangular distribution and is expressed for the square of the field value. Certificate No: ET3—1380_Dec11 Page 4 of 11 AA Acreuaceho. sse

ET3DV6— SN:1380 December 12, 2011 DASY/EASY — Parameters of Probe: ET3DVG6 — SN:1380 Calibration Parameter Determined in Head Tissue Simulating Media Relative Conductivity Depth Unct. f(MHz)° Permittivity" (S/m)" ConvFX ConvFY ConvFZ Alpha (mm) (k=2) 300 45.3 0.87 7.79 7.79 7.179 0.30 1.56 £13.4 % 450 43.5 0.87 7.00 7.00 7.00 0.23 2.37 £13.4 % 900 41.5 0.97 5.88 5.88 5.88 0.80 1.92 £12.0 % 1640 40.3 1.29 5.35 5.35 §.535 0.68 2.22 + 12.0 % 1810 40.0 1.40 5.05 _| 5.05 5.05 0.72 2.09 * 12.0 % 1950 40.0 1.40 4.80 4.80 4.80 0.71 217 £12.0 % 2450 39.2 1.80 4.35 4.35 4.35 1.00 1.61 £12.0 % © Frequency validity of + 100 MHz only applies for DASY v4.4 and higher (see Page 2), else it is restricted to + 50 MHz. The uncertainty is the RSS of the ConvF uncertainty at calibration frequency and the uncertainty for the indicated frequency band. " At frequencies below 3 GHz, the validity of tissue parameters (c and 0) can be relaxed to + 10% if liquid compensation formula is applied to measured SAR values. At frequencies above 3 GHz, the validity of tissue parameters (e and a) is restricted to + 5%. The uncertainty is the RSS of the ConvF uncertainty for indicated target tissue parameters. Certificate No: ET3—1380_Dec11 Page 5 of 11

ET3DV6— SN:1380 December 12, 2011 DASY/EASY — Parameters of Probe: ET3DVG6 — SN:1380 Calibration Parameter Determined in Body Tissue Simulating Media Relative Conductivity Depth Unct. f(MHz)© |_Permittivity® (S/m)" ConvFX ConvFY ConvFZ Alpha (mm) (k=2) 450 56.7 0.94 7.41 7.41 7.41 0.16 2.29 £13.4 % 900 55.0 1.05 5.94 5.94 5.94 1.00 1.63 £12.0 % 1810 53.3 152 4.66 4.66 4.66 0.69 2.50 £12.0 % 1950 553 1.52 4.68 4.68 4.68 0.72 2.35 + 12.0 % 2450 52.7 1.95_ _4215 4.15 4.15 1.00 1.29 + 12.0 % ° Frequency validity of £ 100 MHz only applies for DASY v4.4 and higher (see Page 2), else it is restricted to + 50 MHz. The uncertainty is the RSS of the ConvF uncertainty at calibration frequency and the uncertainty for the indicated frequency band. " At frequencies below 3 GHz, the validity of tissue parameters (c and a) can be relaxed to + 10% if liquid compensation formula is applied to measured SAR values. At frequencies above 3 GHz, the validity of tissue parameters (c and a) is restricted to + 5%. The uncertainty is the RSS of the ConvF uncertainty for indicated target tissue parameters. Certificate No: ET3—1380_Dec11 Page 6 of 11 Acreuaceho. sse

ETSDV6— SN:1380 December 12, 2011 Frequency Response of E—Field (TEM—Cell:if110 EXX, Waveguide: R22) Frequency response (normalized) 1_j__ : I I 2500 3000 ce R22 Uncertainty of Frequency Response of E—field: £ 6.3% (k=2) Certificate No: ET3—1380_Dec11 Page 7 of 11 AcsesuncnNo: wse

ET3DV6— SN:1380 December 12, 2011 Receiving Pattern (¢), 8 = 0° f=600 MHz,TEM f=1800 MHz,R22 & ‘so 135 135 180 — / o 18 + a o« gs os i o4 o3/ os + % «— s |4 : — zes f ns 20s a1s 270 . 270 i e e e e e [€] Tot X Y 2 Tot X Y Z Error [dB] pugl Fop ib p d P pgpy 4 : E f i 7 i i 150 —100 50 0 Roll ["] C €00 MHz 1800 MHz 2500 MHz Uncertainty of Axial Isotropy Assessment: £ 0.5% (k=2) Certificate No: ET3—1380_Dec11 Page 8 of 11


Document Created: 2019-10-16 03:36:29
Document Modified: 2019-10-16 03:36:29
© 2024 FCC.report
This site is not affiliated with or endorsed by the FCC