Test report

FCC ID: PPD-AR5BBU22

Test Report

Download: PDF
FCCID_1473373

FCC DoC TEST REPORT REPORT NO. : FD110407E08 MODEL NO. : AR5BBU22 RECEIVED : Apr. 07, 2011 TESTED : Apr. 15 to 26, 2011 ISSUED: May 11, 2011 APPLICANT : Atheros Communications, Inc. ADDRESS : 1700 Technology Drive, San Jose, CA 95110 ISSUED BY: Bureau Veritas Consumer Products Services (H.K.) Ltd., Taoyuan Branch Hsin Chu Laboratory LAB ADDRESS: No. 81-1, Lu Liao Keng, 9th Ling,Wu Lung Tsuen, Chiung Lin Hsiang, Hsin Chu Hsien 307, Taiwan TEST LOCATION (1): No. 81-1, Lu Liao Keng, 9th Ling,Wu Lung Tsuen, Chiung Lin Hsiang, Hsin Chu Hsien 307, Taiwan TEST LOCATION (2): No. 49, Ln. 206, Wende Rd., Shangshan Tsuen, Chiung Lin Hsiang, Hsin Chu Hsien 307, Taiwan This test report consists of 23 pages in total. It may be duplicated completely for legal use with the approval of the applicant. It should not be reproduced except in full, without the written approval of our laboratory. The client should not use it to claim product certification, approval, or endorsement by TAF, NVLAP, NIST, or any government agency. The test results in the report only apply to the tested sample. The test results in this report are traceable to the national or international standards. Report No.: FD110407E08 1 Report Format Version 4.0.0 Reference No.:

Table of Contents RELEASE CONTROL RECORD................................................................................. 3 1 CERTIFICATION ............................................................................................. 4 2 SUMMARY OF TEST RESULTS..................................................................... 5 2.1 MEASUREMENT UNCERTAINTY .................................................................. 5 3 GENERAL INFORMATION ............................................................................. 6 3.1 GENERAL DESCRIPTION OF EUT................................................................ 6 3.2 ANTENNA SPECIFICATIONS ........................................................................ 7 3.3 DESCRIPTION OF SUPPORT UNITS............................................................ 8 3.4 CONFIGURATION OF SYSTEM UNDER TEST ............................................. 8 4 EMISSION TEST............................................................................................. 9 4.1 CONDUCTED EMISSION MEASUREMENT .................................................. 9 4.1.1 LIMITS OF CONDUCTED EMISSION MEASUREMENT................................ 9 4.1.2 TEST INSTRUMENTS .................................................................................... 9 4.1.3 TEST PROCEDURE ..................................................................................... 10 4.1.4 DEVIATION FROM TEST STANDARD ......................................................... 10 4.1.5 TEST SETUP .................................................................................................11 4.1.6 EUT OPERATING CONDITIONS...................................................................11 4.1.7 TEST RESULTS............................................................................................ 12 4.2 RADIATED EMISSION MEASUREMENT ..................................................... 14 4.2.1 LIMITS OF RADIATED EMISSION MEASUREMENT................................... 14 4.2.2 TEST INSTRUMENTS .................................................................................. 15 4.2.3 TEST PROCEDURE ..................................................................................... 16 4.2.4 DEVIATION FROM TEST STANDARD ......................................................... 16 4.2.5 TEST SETUP ................................................................................................ 17 4.2.6 EUT OPERATING CONDITIONS.................................................................. 17 4.2.7 TEST RESULTS............................................................................................ 18 5 INFORMATION ON THE TESTING LABORATORIES .................................. 22 6 APPENDIX A - MODIFICATIONS RECORDERS FOR ENGINEERING CHANGES TO THE EUT BY THE LAB ......................................................... 23 Report No.: FD110407E08 2 Report Format Version 4.0.0 Reference No.:

RELEASE CONTROL RECORD ISSUE NO. REASON FOR CHANGE DATE ISSUED FD110407E08 Original release May 11, 2011 Report No.: FD110407E08 3 Report Format Version 4.0.0 Reference No.:

1 CERTIFICATION PRODUCT : Bluetooth USB module BRAND NAME : Atheros MODEL NO.: AR5BBU22 TEST SAMPLE : R&D SAMPLE APPLICANT : Atheros Communications, Inc. TESTED : Apr. 15 to 26, 2011 STANDARDS : FCC Part 15, Subpart B, Class B ANSI C63.4-2003 The above equipment (Model: AR5BBU22) has been tested by Bureau Veritas Consumer Products Services (H.K.) Ltd., Taoyuan Branch, and was in compliance with the requirement of the above standards. The test record, data evaluation & Equipment Under Test (EUT) configurations represented herein are true and accurate accounts of the measurements of the sample’s EMC characteristics under the conditions specified in this report. PREPARED BY : , DATE: May 11, 2011 ( Midoli Peng, Specialist ) APPROVED BY : , DATE: May 11, 2011 (May Chen, Deputy Manager ) Report No.: FD110407E08 4 Report Format Version 4.0.0 Reference No.:

2 SUMMARY OF TEST RESULTS Standard Test Type Result Remarks Meets Class B Limit Conducted Test PASS Minimum passing margin is FCC Part 15, -20.06 dB at 0.373 MHz Subpart B, Class B Meets Class B Limit Radiated Test PASS Minimum passing margin is -3.0 dB at 304.62 MHz Note: The limit for radiated test was performed according to CISPR 22, which was specified in FCC PART 15 Subpart B 15.109(g). Also the limits of ICES-003: 2004 and CISPR 22 are same. 2.1 MEASUREMENT UNCERTAINTY Where relevant, the following measurement uncertainty levels have been estimated for tests performed on the EUT as specified in CISPR 16-4-2: This uncertainty represents an expanded uncertainty expressed at approximately the 95% confidence level using a coverage factor of k=2. Measurement Value Conducted emissions 2.45 dB Radiated emissions (30MHz-1GHz) 3.3 dB Radiated emissions (1GHz -18GHz) 2.19 dB Radiated emissions (18GHz -40GHz) 2.55 dB Report No.: FD110407E08 5 Report Format Version 4.0.0 Reference No.:

3 GENERAL INFORMATION 3.1 GENERAL DESCRIPTION OF EUT PRODUCT Bluetooth USB module MODEL NO. AR5BBU22 POWER SUPPLY DC 3.3V from host equipment POWER CORD NA DATA CABLE NA SUPPLIED I/O PORTS NA ASSOCIATED NA DEVICES NOTE: 1. The Bluetooth supports version 4.0. 2. There are three versions of EUT which are identical to each other in all aspects except for the following table Versions Variations in memory -80 EEPROM -90 SFLASH -180 OTP From the above Versions, the worst case was found in Version -80. Therefore only the test data of the version was recorded in this report. * The EUT has two shielding design. The deviated version has two pins removed and 4 holes on the top of shielding. * The worst-case scenario has been investigated in radiated test with same power level and found no difference. * The test data reflects the worst-case scenarios. 3. For radiated : The EUT’s antenna was pre-tested under the following modes: Test Mode Description Mode A X-Y axis Mode B Y-Z axis Mode C X-Z axis From the above modes, the worst case was found in Mode B. Therefore only the test data of the mode was recorded in this report. 4. For a more detailed features description, please refer to the manufacturer's specifications or the User's Manual. Report No.: FD110407E08 6 Report Format Version 4.0.0 Reference No.:

3.2 ANTENNA SPECIFICATIONS There is one antenna provided to this EUT, please refer to the following table: Brand Model Antenna Type Connector Antenna Gain (dBi) Atheros NA Printed NA 1.14 1. Note: The antenna gain is Total (H+V). Report No.: FD110407E08 7 Report Format Version 4.0.0 Reference No.:

3.3 DESCRIPTION OF SUPPORT UNITS The EUT has been tested as an independent unit together with other necessary accessories or support units. The following support units or accessories were used to form a representative test configuration during the tests. NO. PRODUCT BRAND MODEL NO. SERIAL NO. FCC ID NOTEBOOK 1 DELL PP32LA GSLB32S FCC DoC COMPUTER EXTENSION 2 Atheros NA NA NA CARD NO. SIGNAL CABLE DESCRIPTION OF THE ABOVE SUPPORT UNITS 1 NA 2 NA NOTE: All power cords of the above support units are non shielded (1.8m). 3.4 CONFIGURATION OF SYSTEM UNDER TEST Antenna EUT 2. EXTENSION 1. NOTEBOOK CARD COMPUTER Data cable (0.08m) TEST TABLE Report No.: FD110407E08 8 Report Format Version 4.0.0 Reference No.:

4 EMISSION TEST 4.1 CONDUCTED EMISSION MEASUREMENT 4.1.1 LIMITS OF CONDUCTED EMISSION MEASUREMENT TEST STANDARD: FCC Part 15, Subpart B (Section: 15.107) CISPR 22: 1997 (section 5) ICES-003: 2004 (Class A: section 5.2) (Class B: section 5.3) FREQUENCY Class A (dBuV) Class B (dBuV) (MHz) Quasi-peak Average Quasi-peak Average 0.15 - 0.5 79 66 66 - 56 56 - 46 0.50 - 5.0 73 60 56 46 5.0 - 30.0 73 60 60 50 NOTE: (1) The lower limit shall apply at the transition frequencies. (2) The limit decreases linearly with the logarithm of the frequency in the range 0.15 to 0.50 MHz (3) All emanation from a class A/B digital device or system, including any network of conductors and apparatus connected thereto, shall not exceed the level of field strengths specified above. 4.1.2 TEST INSTRUMENTS DESCRIPTION & CALIBRATED CALIBRATED MODEL NO. SERIAL NO. MANUFACTURER DATE UNTIL Test Receiver ESCS 30 100375 Mar. 09, 2011 Mar. 08, 2012 Line-Impedance Stabilization Network NSLK 8127 8127-522 Sep. 08, 2010 Sep. 07, 2011 (for EUT) Line-Impedance Stabilization Network ESH3-Z5 848773/004 Nov. 03, 2010 Nov. 02, 2011 (for Peripheral) RF Cable (JYEBAO) 5DFB COCCAB-002 Aug. 30, 2010 Aug. 29, 2011 50 ohms Terminator 50 3 Nov. 03, 2010 Nov. 02, 2011 BV Software NA NA NA ADT_Cond_V7.3.7 Note: 1. The calibration interval of the above test instruments is 12 months and the calibrations are traceable to NML/ROC and NIST/USA. 2. The test was performed in Shielded Room No. C. 3 The VCCI Con C Registration No. is C-3611. Report No.: FD110407E08 9 Report Format Version 4.0.0 Reference No.:

4.1.3 TEST PROCEDURE The basic test procedure was in accordance with ANSI C63.4-2003 (section 7), CISPR 22 (section 9) and ICES-003: 2004 (section 4). a. The EUT was placed 0.4 meters from the conducting wall of the shielded room with EUT being connected to the power mains through a line impedance stabilization network (LISN). Other support units were connected to the power mains through another LISN. The two LISNs provide 50 Ohm/ 50uH of coupling impedance for the measuring instrument. b. Both lines of the power mains connected to the EUT were checked for maximum conducted interference. c. The frequency range from 150 kHz to 30 MHz was searched. Emission levels over 10dB under the prescribed limits could not be reported. 4.1.4 DEVIATION FROM TEST STANDARD No deviation Report No.: FD110407E08 10 Report Format Version 4.0.0 Reference No.:

4.1.5 TEST SETUP Ve r tic a l R e f e r e n c e G r o u n d P la n e T e s t R e c e iv e r EUT 40cm 80cm L IS N H o r iz o n ta l R e fe r e n c e G r o u n d P la n e N o te : 1 .S u p p o r t u n its w e r e c o n n e c te d to s e c o n d L IS N . 2 .B o th o f L IS N s ( A M N ) a r e 8 0 c m fr o m E U T a n d a t le a s t 8 0 fr o m o th e r u n its a n d o th e r m e ta l p la n e s For the actual test configuration, please refer to the related item – Photographs of the Test Configuration. 4.1.6 EUT OPERATING CONDITIONS 1. Connect the EUT with the support unit 1 (Notebook Computer) which is placed on a testing table. 2. The communication partner run test program “ART R0.2B25” & “BtTest_egret.exe V1_0_B17” to enable EUT under transmission/receiving condition continuously at specific channel frequency. Report No.: FD110407E08 11 Report Format Version 4.0.0 Reference No.:

4.1.7 TEST RESULTS TEST MODE Mode 1 6dB BANDWIDTH 9kHz INPUT POWER 120Vac, 60Hz PHASE Line (L) (SYSTEM) ENVIRONMENTAL 21deg. C, 67%RH, TESTED BY Frank Liu CONDITIONS 1023hPa Emission Freq. Corr. Reading Value Limit Margin Level No Factor [dB (uV)] [dB (uV)] [dB (uV)] (dB) [MHz] (dB) Q.P. AV. Q.P. AV. Q.P. AV. Q.P. AV. 1 0.232 0.13 30.97 - 31.10 - 62.38 52.38 -31.28 - 2 0.373 0.13 35.13 - 35.26 - 58.44 48.44 -23.18 - 3 0.392 0.13 33.69 - 33.82 - 58.02 48.02 -24.20 - 4 2.184 0.16 26.41 - 26.57 - 56.00 46.00 -29.43 - 5 4.633 0.23 24.20 - 24.43 - 56.00 46.00 -31.57 - 6 20.504 0.68 22.80 - 23.48 - 60.00 50.00 -36.52 - REMARKS: 1. Q.P. and AV. are abbreviations of quasi-peak and average individually. 2. "-": The Quasi-peak reading value also meets average limit and measurement with the average detector is unnecessary. 3. The emission levels of other frequencies were very low against the limit. 4. Margin value = Emission level - Limit value 5. Correction factor = Insertion loss + Cable loss 6. Emission Level = Correction Factor + Reading Value. Report No.: FD110407E08 12 Report Format Version 4.0.0 Reference No.:

TEST MODE Mode 1 6dB BANDWIDTH 9kHz INPUT POWER 120Vac, 60Hz PHASE Neutral (N) (SYSTEM) ENVIRONMENTAL 21deg. C, 67%RH, TESTED BY Frank Liu CONDITIONS 1023hPa Emission Freq. Corr. Reading Value Limit Margin Level No Factor [dB (uV)] [dB (uV)] [dB (uV)] (dB) [MHz] (dB) Q.P. AV. Q.P. AV. Q.P. AV. Q.P. AV. 1 0.150 0.12 32.52 - 32.64 - 66.00 56.00 -33.36 - 2 0.373 0.15 38.23 - 38.38 - 58.44 48.44 -20.06 - 3 0.392 0.15 34.88 - 35.03 - 58.02 48.02 -22.99 - 4 1.086 0.16 26.19 - 26.35 - 56.00 46.00 -29.65 - 5 2.465 0.21 28.20 - 28.41 - 56.00 46.00 -27.59 - 6 20.418 1.45 23.11 - 24.56 - 60.00 50.00 -35.44 - REMARKS: 1. Q.P. and AV. are abbreviations of quasi-peak and average individually. 2. "-": The Quasi-peak reading value also meets average limit and measurement with the average detector is unnecessary. 3. The emission levels of other frequencies were very low against the limit. 4. Margin value = Emission level - Limit value 5. Correction factor = Insertion loss + Cable loss 6. Emission Level = Correction Factor + Reading Value. Report No.: FD110407E08 13 Report Format Version 4.0.0 Reference No.:

4.2 RADIATED EMISSION MEASUREMENT 4.2.1 LIMITS OF RADIATED EMISSION MEASUREMENT TEST STANDARD: FCC Part 15, Subpart B (Section: 15.109) FOR FREQUENCY BELOW 1000 MHz (47 CFR Part 15 Subpart B) FREQUENCY Class A (at 10m) Class B (at 3m) (MHz) uV/m dBuV/m uV/m dBuV/m 30 – 88 90 39.1 100 40.0 88 – 216 150 43.5 150 43.5 216 - 960 210 46.4 200 46.0 Above 960 300 49.5 500 54.0 LIMIT OF RADIATED EMISSION OF FCC PART 15, SUBPART B FOR FREQUENCY ABOVE 1000 MHz Class A (dBuV/m) (at 3m) Class B (dBuV/m) (at 3m) FREQUENCY (MHz) PEAK AVERAGE PEAK AVERAGE Above 1000 80.0 60.0 74.0 54.0 Note: (1) The lower limit shall apply at the transition frequencies. (2) Emission level (dBuV/m) = 20 log Emission level (uV/m). (3) All emanation from a class A/B digital device or system, including any network of conductors and apparatus connected thereto, shall not exceed the level of field strengths specified above. FREQUENCY RANGE OF RADIATED MEASUREMENT (For unintentional radiators) Highest frequency generated or Upper frequency of measurement used in the device or on which the Range (MHz) device operates or tunes (MHz) Below 1.705 30 1.705 – 108 1000 108 – 500 2000 500 – 1000 5000 th 5 harmonic of the highest frequency Above 1000 or 40 GHz, whichever is lower Report No.: FD110407E08 14 Report Format Version 4.0.0 Reference No.:

4.2.2 TEST INSTRUMENTS DESCRIPTION & CALIBRATED CALIBRATED MODEL NO. SERIAL NO. MANUFACTURER DATE UNTIL Agilent E4446A MY48250254 July 14, 2010 July 13, 2011 Spectrum Analyzer Agilent N9039A MY46520311 July 14, 2010 July 13, 2011 Pre-Selector Agilent N5181A MY49060517 July 14, 2010 July 13, 2011 Signal Generator Mini-Circuits ZFL-1000VH2B AMP-ZFL-03 Nov. 16, 2010 Nov. 15, 2011 Pre-Amplifier Agilent Pre-Amplifier 8449B 3008A02578 July 05, 2010 July 04, 2011 Miteq AFS33-1800265 881786 NA NA Pre-Amplifier 0-30-8P-44 SCHWARZBECK VULB 9168 9168-360 Apr. 29, 2010 Apr. 28, 2011 Trilog Broadband Antenna AISI AIH.8018 0000320091110 Nov. 12, 2010 Nov. 11, 2011 Horn_Antenna SCHWARZBECK BBHA 9170 9170-424 Oct. 08, 2010 Oct. 07, 2011 Horn_Antenna RF104-201 RF CABLE NA RF104-203 Dec. 27, 2010 Dec. 26, 2011 RF104-204 RF Cable NA CHGCAB_001 NA NA ADT_Radiated_ Software NA NA NA V8.7.05 CT Antenna Tower & NA NA NA NA Turn Table Note: 1. The calibration interval of the above test instruments is 12 months and the calibrations are traceable to NML/ROC and NIST/USA. 2. The horn antenna, preamplifier (model: 8449B) are used only for the measurement of emission frequency above 1GHz if tested. 3. The test was performed in 966 Chamber No. G. 4. The FCC Site Registration No. is 966073. 5. The VCCI Site Registration No. is G-137. 6. The CANADA Site Registration No. is IC 7450H-2. Report No.: FD110407E08 15 Report Format Version 4.0.0 Reference No.:

4.2.3 TEST PROCEDURE The basic test procedure was in accordance with ANSI C63.4-2003 (section 8), CISPR 22 (section 10) and ICES-003: 2004 (section 4). a. The EUT was placed on the top of a rotating table 0.8 meters above the ground at a 3 meter chamber. The table was rotated 360 degrees to determine the position of the highest radiation. b. The EUT was set 3 meters away from the interference-receiving antenna, which was mounted on the top of a variable-height antenna tower. c. The height of antenna is varied from one meter to four meters above the ground to determine the maximum value of the field strength. Both horizontal and vertical polarizations of the antenna are set to make the measurement. d. For each suspected emission, the EUT was arranged to its worst case and then the antenna was tuned to heights from 1 meter to 4 meters and the turn table was turned from 0 degrees to 360 degrees to find the maximum reading. e. The test-receiver system was set to quasi-peak detect function and specified bandwidth with maximum hold mode when the test frequency is below 1 GHz. f. The test-receiver system was set to peak and average detect function and specified bandwidth with maximum hold mode when the test frequency is above 1 GHz. If the peak reading value also meets average limit, measurement with the average detector is unnecessary. NOTE: 1. The resolution bandwidth and video bandwidth of test receiver/spectrum analyzer is 120kHz for Quasi-peak detection (QP) at frequency below 1GHz. 2. The resolution bandwidth is 1MHz and video bandwidth of test receiver/spectrum analyzer is 3MHz for Peak detection at frequency above 1GHz. The resolution bandwidth of test receiver/spectrum analyzer is 1 MHz for Average detection (AV) at frequency above 1GHz. 3. For measurement of frequency above 1000 MHz, the EUT was set 3 meters away from the interference-receiving antenna. 4.2.4 DEVIATION FROM TEST STANDARD No deviation Report No.: FD110407E08 16 Report Format Version 4.0.0 Reference No.:

4.2.5 TEST SETUP Test Receiver For the actual test configuration, please refer to the related item – Photographs of the Test Configuration. 4.2.6 EUT OPERATING CONDITIONS Same as 4.1.6 Report No.: FD110407E08 17 Report Format Version 4.0.0 Reference No.:

4.2.7 TEST RESULTS TEST MODE Mode 1 FREQUENCY RANGE Below 1GHz DETECTOR Quasi-Peak, INPUT POWER 120Vac, 60 Hz FUNCTION & (SYSTEM) BANDWIDTH 120kHz ENVIRONMENTAL 15 deg. C, 68 %RH, TESTED BY Frank Liu CONDITIONS 1023hPa ANTENNA POLARITY & TEST DISTANCE: HORIZONTAL AT 3 M Emission Antenna Table Raw Correction Freq. Limit Margin No. Level Height Angle Value Factor (MHz) (dBuV/m) (dB) (dBuV/m) (m) (Degree) (dBuV) (dB/m) 1 161.33 36.72 QP 43.50 -6.78 2.00 H 264 22.18 14.54 2 239.96 34.81 QP 46.00 -11.19 1.00 H 114 21.91 12.90 3 304.62 43.00 QP 46.00 -3.00 1.00 H 283 27.44 15.56 4 321.79 40.32 QP 46.00 -5.68 1.00 H 280 24.38 15.94 5 498.01 35.30 QP 46.00 -10.70 2.00 H 202 15.25 20.05 6 604.82 33.21 QP 46.00 -12.79 1.00 H 278 10.77 22.44 REMARKS: 1. Emission level(dBuV/m)=Raw Value(dBuV) + Correction Factor(dB/m) 2. Correction Factor(dB/m) = Antenna Factor (dB/m) + Cable Factor (dB) 3. The other emission levels were very low against the limit. 4. Margin value = Emission level – Limit value. Report No.: FD110407E08 18 Report Format Version 4.0.0 Reference No.:

TEST MODE Mode 1 FREQUENCY RANGE Below 1GHz DETECTOR Quasi-Peak, INPUT POWER 120Vac, 60 Hz FUNCTION & (SYSTEM) BANDWIDTH 120kHz ENVIRONMENTAL 15 deg. C, 68 %RH, TESTED BY Frank Liu CONDITIONS 1023hPa ANTENNA POLARITY & TEST DISTANCE: VERTICAL AT 3 M Emission Antenna Table Raw Correction Freq. Limit Margin No. Level Height Angle Value Factor (MHz) (dBuV/m) (dB) (dBuV/m) (m) (Degree) (dBuV) (dB/m) 1 36.04 36.87 QP 40.00 -3.13 1.00 V 269 23.33 13.54 2 161.09 36.54 QP 43.50 -6.96 1.00 V 130 21.97 14.57 3 303.08 34.46 QP 46.00 -11.54 1.50 V 73 18.93 15.53 4 497.77 37.31 QP 46.00 -8.69 1.50 V 274 17.26 20.05 5 607.07 31.00 QP 46.00 -15.00 1.00 V 240 8.53 22.47 6 900.64 34.61 QP 46.00 -11.39 1.00 V 281 7.80 26.81 REMARKS: 1. Emission level(dBuV/m)=Raw Value(dBuV) + Correction Factor(dB/m) 2. Correction Factor(dB/m) = Antenna Factor (dB/m) + Cable Factor (dB) 3. The other emission levels were very low against the limit. 4. Margin value = Emission level – Limit value. Report No.: FD110407E08 19 Report Format Version 4.0.0 Reference No.:

TEST MODE Mode 1 FREQUENCY RANGE 1000~12500MHz DETECTOR Peak (PK) INPUT POWER 120Vac, 60 Hz FUNCTION & Average (AV) (SYSTEM) BANDWIDTH 1 MHz ENVIRONMENTAL 17 deg. C, 67 %RH, CONDITIONS TESTED BY Kent Liu 1023hPa ANTENNA POLARITY & TEST DISTANCE: HORIZONTAL AT 3 M Emission Antenna Table Raw Correction Freq. Limit Margin No. Level Height Angle Value Factor (MHz) (dBuV/m) (dB) (dBuV/m) (m) (Degree) (dBuV) (dB/m) 1 2480.00 41.60 PK 74.00 -32.40 1.43 H 104 9.65 31.95 2 2480.00 28.40 AV 54.00 -25.60 1.43 H 104 -3.55 31.95 3 3000.00 46.70 PK 74.00 -27.30 1.21 H 134 13.66 33.04 4 3000.00 40.20 AV 54.00 -13.80 1.21 H 134 7.16 33.04 REMARKS: 1. Emission level(dBuV/m)=Raw Value(dBuV) + Correction Factor(dB/m) 2. Correction Factor(dB/m) = Antenna Factor (dB/m) + Cable Factor (dB) 3. The other emission levels were very low against the limit. 4. Margin value = Emission level – Limit value. Report No.: FD110407E08 20 Report Format Version 4.0.0 Reference No.:

TEST MODE Mode 1 FREQUENCY RANGE 1000~12500MHz INPUT POWER DETECTOR Peak (PK) 120Vac, 60 Hz FUNCTION & Average (AV) (SYSTEM) BANDWIDTH 1 MHz ENVIRONMENTAL 17 deg. C, 67 %RH, TESTED BY Kent Liu CONDITIONS 1023hPa ANTENNA POLARITY & TEST DISTANCE: VERTICAL AT 3 M Emission Antenna Table Raw Correction Freq. Limit Margin No. Level Height Angle Value Factor (MHz) (dBuV/m) (dB) (dBuV/m) (m) (Degree) (dBuV) (dB/m) 1 2480.00 40.70 PK 74.00 -33.30 1.13 V 326 8.75 31.95 2 2480.00 28.50 AV 54.00 -25.50 1.13 V 326 -3.45 31.95 3 3000.00 49.30 PK 74.00 -24.70 1.31 V 314 16.26 33.04 4 3000.00 46.60 AV 54.00 -7.40 1.31 V 314 13.56 33.04 REMARKS: 1. Emission level(dBuV/m)=Raw Value(dBuV) + Correction Factor(dB/m) 2. Correction Factor(dB/m) = Antenna Factor (dB/m) + Cable Factor (dB) 3. The other emission levels were very low against the limit. 4. Margin value = Emission level – Limit value. Report No.: FD110407E08 21 Report Format Version 4.0.0 Reference No.:

5 INFORMATION ON THE TESTING LABORATORIES We, Bureau Veritas Consumer Products Services (H.K.) Ltd., Taoyuan Branch, were founded in 1988 to provide our best service in EMC, Radio, Telecom and Safety consultation. Our laboratories are accredited and approved according to ISO/IEC 17025. Copies of accreditation certificates of our laboratories obtained from approval agencies can be downloaded from our web site: www.adt.com.tw/index.5.phtml. If you have any comments, please feel free to contact us at the following: Linko EMC/RF Lab: Hsin Chu EMC/RF Lab: Tel: 886-2-26052180 Tel: 886-3-5935343 Fax: 886-2-26052943 Fax: 886-3-5935342 Hwa Ya EMC/RF/Safety/Telecom Lab: Tel: 886-3-3183232 Fax: 886-3-3185050 Email: service@adt.com.tw Web Site: www.adt.com.tw The address and road map of all our labs can be found in our web site also. Report No.: FD110407E08 22 Report Format Version 4.0.0 Reference No.:

6 APPENDIX A - MODIFICATIONS RECORDERS FOR ENGINEERING CHANGES TO THE EUT BY THE LAB No any modifications are made to the EUT by the lab during the test. --- END --- Report No.: FD110407E08 23 Report Format Version 4.0.0 Reference No.:


Document Created: 2011-05-11 11:38:14
Document Modified: 2011-05-11 11:38:14
© 2024 FCC.report
This site is not affiliated with or endorsed by the FCC