test report

FCC ID: PODTYT-A5

Test Report

Download: PDF
FCCID_3467252

Page 1 of27 FCC Test Report Report No: AGCO1039170611FEO8 ree i ropyr—as TyPE or AUTRORIZATION Certification Arpuication purpose Original Equipment rropucr pesionation : Analog Transceiver BRaNd NamE :orym mopet nams i0 TVPAS, TYTAZ TVTAd, TYT—A6, TYTAIB, T¥T—A20 currnt :. TVTELECTRONICSCO, LTD pare or issuE : Julo7, 2017 sranparn(s) :— FCC Part 15 Rules rEpoRT version : vio Attestation of Global G&mpliance (Shenzhen) Co. CAUTION: This report shallnat be reprodiuced Jaboratary andshall not be quoted out

Report No.: AGC09900170301FE08 Page 2 of 27 Report Revise Record Report Version Revise Time Issued Date Valid Version Notes V1.0 / Jul.07, 2017 Valid Original Report

Report No.: AGC09900170301FE08 Page 3 of 27 TABLE OF CONTENTS 1. VERIFICATION OF COMPLIANCE ................................................................................................................. 4 2. PRODUCT INFORMATION .............................................................................................................................. 5 3. IDENTIFICATION OF THE RESPONSIBLE TESTING LOCATION ............................................................... 6 4. SUPPORT EQUIPMENT LIST ......................................................................................................................... 7 5. SYSTEM DESCRIPTION .................................................................................................................................. 7 6. SUMMARY OF TEST RESULTS ..................................................................................................................... 8 7. FCC RADIATED EMISSION TEST .................................................................................................................. 9 7.1. TEST EQUIPMENT OF RADIATED EMISSION .................................................................................... 9 7.2. LIMITS OF RADIATED EMISSION TEST .............................................................................................. 9 7.3 BLOCK DIAGRAM OF RADIATED EMISSION TEST ............................................................................ 9 7.4 PROCEDURE OF RADIATED EMISSION TEST ................................................................................. 10 7.5 TEST RESULT OF RADIATED EMISSION TEST ................................................................................ 11 8. CONDUCTED EMISSION TEST .................................................................................................................... 13 8.1 PROVISIONS APPLICABLE ................................................................................................................. 13 8.2 MEASUREMENT PROCEDURE ........................................................................................................... 13 8.3 TEST SETUP BLOCK DIAGRAM ......................................................................................................... 14 8.4 TEST RESULT....................................................................................................................................... 15 9. ANTENNA CONDUCTED POWER FOR RECEIVERS ................................................................................. 17 APPENDIX 1 PHOTOGRAPHS OF TEST SETUP ............................................................................................ 20 APPENDIX 2 PHOTOGRAPHS OF EUT ........................................................................................................... 22

Report No.: AGC09900170301FE08 Page 4 of 27 1. VERIFICATION OF COMPLIANCE Applicant TYT ELECTRONICS CO., LTD Address Block 39-1,Optoelectronics-information industry base,Nan’an,Quanzhou,Fujian,China Manufacturer TYT ELECTRONICS CO., LTD Address Block 39-1,Optoelectronics-information industry base,Nan’an,Quanzhou,Fujian,China Product Designation Analog Transceiver Brand name TYT Test Model TYT-A5 Serial Model TYT-A2, TYT-A4, TYT-A6, TYT-A18, TYT-A28 Serial Model Difference All the same except for the model name and appearance. Hardware Version TY-A18 Software Version V1.16 Measurement Procedure ANSI C63.4: 2014 Date of test: Jul.05, 2017 to Jul.07, 2017 Deviation: None Condition of Test Sample Normal The above equipment was tested by Attestation Of Global Compliance (Shenzhen) Co., Ltd. for compliance with the requirements set forth in the FCC Rules and Regulations Part 15, the measurement procedure according to ANSI C63.4:2014. This said equipment in the configuration described in this report shows the maximum emission levels emanating from equipment are within the compliance requirements. The test results of this report relate only to the tested sample identified in this report. Tested by Steven Zhou(Zhou Pengyun) Jul.07, 2017 Reviewed by Bart Xie(Xie Xiaobin) Jul.07, 2017 Approved by Solger Zhang(Zhang Hongyi) Jul.07, 2017 Authorized Officer

Report No.: AGC09900170301FE08 Page 5 of 27 2. PRODUCT INFORMATION The EUT is a Analogl Transceiver designed for voice communication. It is designed by way of utilizing the FM modulation achieves the system operating. A major technical description of EUT is described as following: Communication Type Voice / Tone only Modulation FM RX Frequency Range 400MHz -480MHz Emission Type F3E Antenna Designation Detachable Antenna Gain 1.5dBi Power Supply DC 7.4V 1300mAh INPUT:AC 110-220V~ 50/60Hz ,0.3A Charger Parameter OUTPUT:DC 5V , 0.3A I/O Port Information ( Applicable Not Applicable) I/O Port of EUT I/O Port Type Q’TY Cable Tested with DC Input Port 1 0.8m, Unshielded 1 Antenna Connect Port 1 0 1

Report No.: AGC09900170301FE08 Page 6 of 27 3. IDENTIFICATION OF THE RESPONSIBLE TESTING LOCATION Site Dongguan Precise Testing Service Co., Ltd. Building D, Baoding Technology Park,Guangming Road2, Dongcheng District, Location Dongguan, Guangdong, China. The test site is constructed and calibrated to meet the FCC requirements in Description documents TIA/EIA 603 FCC Registration No. 371540 List Of Test Equipment: Radiated Emission Test Site Model Last Due Name of Equipment Manufacturer Serial Number Number Calibration Calibration Rohde & EMI Test Receiver ESCI 101417 July 2, 2017 July 1, 2018 Schwarz Trilog Broadband Antenna SCHWARZBECK VULB9160 9160-3355 July 2, 2017 July 1, 2018 (25M-1GHz) Signal Amplifier SCHWARZBECK BBV 9475 9745-0013 July 2, 2017 July 1, 2018 RF Cable SCHWARZBECK AK9515E 96221 July 2, 2017 July 1, 2018 3m Anechoic Chamber CHENGYU 966 PTS-001 June 2, 2017 June 1, 2018 MULTI-DEVICE Positioning Max-Full MF-7802 MF780208339 N/A N/A Controller Active loop antenna Schwarzbeck FMZB1519 1519-038 June 2, 2017 June 1, 2018 (9K-30MHz) Spectrum analyzer Agilent E4407B MY46185649 June 2, 2017 June 1, 2018 Power Sensor Agilent U2021XA MY55050474 June 2, 2017 June 1, 2018 Horn Antenna (1G-18GHz) SCHWARZBECK BBHA9120D 9120D-1246 June 2, 2017 June 1, 2018 Horn Ant (18G-40GHz) Schwarzbeck BBHA 9170 9170-181 June 2, 2017 June 1, 2018 Conducted Emission Test Site Model Last Name of Equipment Manufacturer Serial Number Due Calibration Number Calibration Rohde & EMI Test Receiver ESCI 101417 June 2, 2017 June 1, 2018 Schwarz Artificial Mains Network Narda L2-16B 000WX31025 June 2, 2017 June 1, 2018 Artificial Mains Network (AUX) Narda L2-16B 000WX31026 June 2, 2017 June 1, 2018 RF Cable SCHWARZBECK AK9515E 96222 June 2, 2017 June 1, 2018 Shielded Room CHENGYU 843 PTS-002 June 2, 2017 June 1, 2018

Report No.: AGC09900170301FE08 Page 7 of 27 4. SUPPORT EQUIPMENT LIST Device Type Manufacturer Model Name Serial No. Data Cable Power Cable -- -- -- -- -- -- 5. SYSTEM DESCRIPTION EUT test procedure: 1. Connect EUT and peripheral devices. 2. Power on the EUT, the EUT begins to work. 3. Running data transmission and make sure the EUT normal working. EMC TEST MODES No. TEST MODES 1 Scanning mode + Receiving mode Note: Only the result of the worst case was recorded in the report.

Report No.: AGC09900170301FE08 Page 8 of 27 6. SUMMARY OF TEST RESULTS FCC Rules Description Of Test Result §15.107 Conduction Emission Compliant §15.109 Radiated Emission Compliant §15.111 Antenna Conducted Power for receivers Compliant

Report No.: AGC09900170301FE08 Page 9 of 27 7. FCC RADIATED EMISSION TEST 7.1. TEST EQUIPMENT OF RADIATED EMISSION 7.2. LIMITS OF RADIATED EMISSION TEST Frequency Distance Maximum Field Strength Limit (MHz) (m) (dBuV/m/ Q.P.) 30~88 3 40.0 88~216 3 43.5 216~960 3 46.0 Above 960 3 54.0 **Note: The lower limit shall apply at the transition frequency. 7.3 BLOCK DIAGRAM OF RADIATED EMISSION TEST 1-4m EUT 3m Amplifier 0.8 m Spectrum Analyzer

Report No.: AGC09900170301FE08 Page 10 of 27 7.4 PROCEDURE OF RADIATED EMISSION TEST 1) The equipment was set up as per the test configuration to simulate typical actual usage per the user’s manual. When the EUT is a tabletop system, a wooden turntable with a height of 0.8 meters is used which is placed on the ground plane as per ANSI C63.4 (see Test Facility for the dimensions of the ground plane used). When the EUT is floor-standing equipment, it is placed on the ground plane which has a 3-12 mm non-conductive covering to insulate the EUT from the ground plane. 2) Support equipment, if needed, was placed as per ANSI C63.4. 3) All I/O cables were positioned to simulate typical actual usage as per ANSI C63.4. 4) The EUT received power by AC 120V/60Hz. 5) The antenna was placed at 3 meter away from the EUT as stated in FCC Part 15. The antenna connected to the Analyzer via a cable and at times a pre-amplifier would be used. 6) The Analyzer / Receiver quickly scanned from 30MHz to 1000MHz. The EUT test program was started. Emissions were scanned and measured rotating the EUT to 360 degrees and positioning the antenna 1 to 4 meters above the ground plane, in both the vertical and the horizontal polarization, to maximize the emission reading level. 7) The test mode(s) were scanned during the test: 8) Recorded at least the six highest emissions. Emission frequency, amplitude, antenna position, polarization and turntable position were recorded into a computer in which correction factors were used to calculate the emission level and compare reading to the applicable limit and Q.P./Peak reading is presented. The test data of the worst case condition (mode 1) was reported on the following Data page

Report No.: AGC09900170301FE08 Page 11 of 27 7.5 TEST RESULT OF RADIATED EMISSION TEST Radiated Emission Test –Horizontal -3m Below 1G RESULT: PASS

Report No.: AGC09900170301FE08 Page 12 of 27 Radiated Emission Test –Vertical -3m Below 1G RESULT: PASS Note: 1. Factor=Antenna Factor + Cable loss - Amplifier gain, Margin=Measurement-Limit. 2. The “Factor” value can be calculated automatically by software of measurement system. 3. Emissions range from 1GHz to 12.5GHz have 20dB margin. No recording in the test report. 4. Only the data of the worst case would be record in this test report.

Report No.: AGC09900170301FE08 Page 13 of 27 8. CONDUCTED EMISSION TEST 8.1 PROVISIONS APPLICABLE For an intentional radiator that is designed to be connected to the public utility (AC) power line, the, the radio frequency voltage that is conducted back onto the AC power line on any frequencies within the band 150 KHz to 30 MHz shall not exceed the limits in the following table, as measured using a 50uH/50 ohms line impedance stabilization network (LISN). Compliance with the provisions of this paragraph shall be based on the measurement of the radio frequency voltage between each power line and ground at the power terminal. The lower limit applies at the boundary between the frequencies ranges. Conducted Limit(dBuV) Frequency of Emission (MHz) Quasi-Peak Average 0.15 – 0.5 66 to 56 * 56 to 46 * 0.5 – 5 56 46 5 – 30 60 50 * Decreases with the logarithm of the frequency. 8.2 MEASUREMENT PROCEDURE (1) The equipment was set up as per the test configuration to simulate typical actual usage per the user’s manual. When the EUT is a tabletop system, a wooden table with a height of 0.8 meters is used and is placed on the ground plane as per ANSI C63.4 (see Test Facility for the dimensions of the ground plane used). When the EUT is a floor-standing equipment, it is placed on the ground plane which has a 3-12 mm non-conductive covering to insulate the EUT from the ground plane. (2) Support equipment, if needed, was placed as per ANSI C63.4. (3) All I/O cables were positioned to simulate typical actual usage as per ANSI C63.4. (4) The EUT received AC 120V/60Hz power through a Line Impedance Stabilization Network (LISN) which supplied power source and was grounded to the ground plane. (5) All support equipments received AC power from a second LISN, if any. (6) The EUT test program was started. Emissions were measured on each current carrying line of the EUT using a spectrum Analyzer / Receiver connected to the LISN powering the EUT. The LISN has two monitoring points: Line 1 (Hot Side) and Line 2 (Neutral Side). Two scans were taken: one with Line 1 connected to Analyzer / Receiver and Line 2 connected to a 50 ohm load; the second scan had Line 1 connected to a 50 ohm load and Line 2 connected to the Analyzer / Receiver. (7) Analyzer / Receiver scanned from 150 KHz to 30MHz for emissions in each of the test modes. During the above scans, the emissions were maximized by cable manipulation.

Report No.: AGC09900170301FE08 Page 14 of 27 8.3 TEST SETUP BLOCK DIAGRAM

Report No.: AGCO8800170301FEO8 Page 15 of 27 84 TEST RESULT CONDUCTED EMISSION TEST — LINE L sno abay ¥l— [veyapyyary! peak live 20 aiso as am ReadngLevel Messurement Nargn no,| Tex. 0B «B _lpr "| is rex o ao ar ao 1 ozs00 |sase m zs ano| P 2 osoeo |aazs 27 nssm P 3 1300 |sose fise [1z80(2100] P 4| 18100 |30i7 iT inss 2189] P 5 sese |sa70 Tss aoz—oa| P 5 trams |asar es [1322(2000| P RESULT: PASS

Report No.: AGCO8800170801FEO8 Page16 of 27 CONDUCTED EMISSION TEST — LINE N sno anw Timk — ave — ave 20 e 150 as som ReadngTevel Corect Mexsurement Nargn No. d Factor (de) Comment ma| & |ac /« & c i Be Teasl 10% Hoas 2330 2 2 as0o oi) fo3r |in—i6s2] 2 3 2100 zm| 1030 nz karel 2 a aaee Te7e| 1037 rnrshoar| _2 5 250 ez| 1027 oz iraal 2 6 a5 Tess 1010 103| 2007 2 RESULT: PASS

Regon No.: AGCossootroaotrEo® Page 17 o 27 9. ANTENNA CONDUCTED POWER FOR RECEIVERS Loam "The antema conducted power fthe receiver as defined in §15.111 shall not exesed the values gen in the folowing tatles Frequency Range 9 Kiz to 20Hz Linik 2.0nW (57 dam ) Test conricuration eut Spectrum Analyzer Test proceoure 1. The reawar antenna terminal connesied to a specirum analyzer 2. The test daia of e worstease condtion (mode 1) was reported on the flowing Daia page

Report No.: AGC09900170301FE08 Page 18 of 27 TEST RESULTS Conducted Measurement (9 KHz to 150 KHz) Conducted Measurement (150 KHz to 30MHz)

Report No.: AGC09900170301FE08 Page 19 of 27 Conducted Measurement (30MHz to 1GHz) Conducted Measurement (1GHz to 2GHz) PASS

Report No.: AGC09900170301FE08 Page 20 of 27 APPENDIX 1 PHOTOGRAPHS OF TEST SETUP CONDUCTED EMISSION TEST SETUP RADIATED EMISSION TEST SETUP

Report No.: AGC09900170301FE08 Page 21 of 27 RADIATED EMISSION TEST SETUP

Report No.: AGC09900170301FE08 Page 22 of 27 APPENDIX 2 PHOTOGRAPHS OF EUT TOTAL VIEW OF EUT TOP VIEW OF EUT

Report No.: AGC09900170301FE08 Page 23 of 27 BOTTOM VIEW OF EUT FRONT VIEW OF EUT

Report No.: AGC09900170301FE08 Page 24 of 27 BACK VIEW OF EUT LEFT VIEW OF EUT

Report No.: AGC09900170301FE08 Page 25 of 27 RIGHT VIEW OF EUT OPEN VIEW-1 OF EUT

Report No.: AGC09900170301FE08 Page 26 of 27 OPEN VIEW-2 OF EUT INTERNAL VIEW-1 OF EUT

Report No.: AGC09900170301FE08 Page 27 of 27 INTERNAL VIEW-2 OF EUT ----END OF REPORT----


Document Created: 2017-07-13 07:41:08
Document Modified: 2017-07-13 07:41:08
© 2024 FCC.report
This site is not affiliated with or endorsed by the FCC