fcc rf report original

FCC ID: PJMCPR74

Test Report

Download: PDF
FCCID_3382199

TEST REPORT Test report no.: 1-2432/16-01-03-A Testing laboratory Applicant CETECOM ICT Services GmbH FEIG ELECTRONIC GmbH Untertuerkheimer Strasse 6 – 10 Lange Str. 4 66117 Saarbruecken / Germany 35781 Weilburg-Waldhausen / GERMANY Phone: + 49 681 5 98 - 0 Phone: +49 6471 31 09-0 Fax: + 49 681 5 98 - 9075 Fax: +49 6471 310-999 Internet: http://www.cetecom.com Contact: Andreas Wennrich e-mail: ict@cetecom.com e-mail: andreas.wennrich@feig.de Phone: +49 6471 310-9468 Accredited Testing Laboratory: The testing laboratory (area of testing) is accredited according to DIN EN ISO/IEC 17025 (2005) by the Deutsche Akkreditierungsstelle GmbH (DAkkS) Manufacturer The accreditation is valid for the scope of testing FEIG ELECTRONIC GmbH procedures as stated in the accreditation certificate with Lange Str. 4 the registration number: D-PL-12076-01-01 35781 Weilburg-Waldhausen / GERMANY Test standard/s 47 CFR Part 15 Title 47 of the Code of Federal Regulations; Chapter I; Part 15 - Radio frequency devices RSS - 210 Issue 8 Spectrum Management and Telecommunications Radio Standards Specification - Licence-exempt Radio Apparatus (All Frequency Bands): Category I Equipment RSS - 210 Issue 8 RSS-210, Amendment 1 — Licence-Exempt, Low-Power Radio Apparatus Amendment 1 Operating in the Television Bands (February 2015) For further applied test standards please refer to section 3 of this test report. Test Item Kind of test item: RFID Reader Model name: CPR74 FCC ID: PJMCPR74 IC: 6633A-CPR74 Frequency: 13.56 MHz Technology tested: RFID Antenna: Integrated loop antenna Power supply: 5.00 V DC by external power supply Temperature range: -25°C to +70°C This test report is electronically signed and valid without handwriting signature. For verification of the electronic signatures, the public keys can be requested at the testing laboratory. Test report authorized: Test performed: cn=Christoph Schneider, o=CETECOM ICT cn=Marco Bertolino, o=CETECOM ICT Services GmbH, ou=SND-120402, Services GmbH, ou=BTL-150828, email=christoph.schneider@cetecom.com, email=marco.bertolino@cetecom.com, c=DE c=DE 2016.10.25 07:46:31 +02'00' 2016.10.25 07:22:26 +02'00' Marco Bertolino Christoph Schneider Lab Manager Testing Manager Radio Communications & EMC Radio Communications & EMC

Test report no.: 1-2432/16-01-03-A 1 Table of contents 1 Table of contents ............................................................................................................................................2 2 General information .......................................................................................................................................3 2.1 Notes and disclaimer ..........................................................................................................................3 2.2 Application details ...............................................................................................................................3 3 Test standard/s and references ....................................................................................................................4 4 Test environment ............................................................................................................................................5 5 Test item ..........................................................................................................................................................5 5.1 General description .............................................................................................................................5 5.2 Additional information ........................................................................................................................5 6 Test laboratories sub-contracted .................................................................................................................5 7 Description of the test setup .........................................................................................................................6 7.1 Shielded semi anechoic chamber ......................................................................................................7 7.2 Shielded fully anechoic chamber ......................................................................................................8 7.3 Frequency error ...................................................................................................................................9 8 Sequence of testing .....................................................................................................................................10 8.1 Sequence of testing radiated spurious 9 kHz to 30 MHz ...............................................................10 8.2 Sequence of testing radiated spurious 30 MHz to 1 GHz ..............................................................11 9 Measurement uncertainty ............................................................................................................................12 10 Summary of measurement results ..........................................................................................................13 11 Additional comments ...............................................................................................................................13 12 Measurement results ................................................................................................................................14 12.1 Occupied bandwidth ......................................................................................................................14 12.2 Field strength of the fundamental ................................................................................................16 12.3 Field strength of the harmonics and spurious ...........................................................................17 12.4 Frequency error .............................................................................................................................21 13 Observations .............................................................................................................................................29 Annex A Document history ..........................................................................................................................29 Annex B Further information ........................................................................................................................29 Annex C Accreditation Certificate ...............................................................................................................30 Page 2 of 30

Test report no.: 1-2432/16-01-03-A 2 General information 2.1 Notes and disclaimer The test results of this test report relate exclusively to the test item specified in this test report. CETECOM ICT Services GmbH does not assume responsibility for any conclusions and generalizations drawn from the test results with regard to other specimens or samples of the type of the equipment represented by the test item. The test report may only be reproduced or published in full. Reproduction or publication of extracts from the report requires the prior written approval of CETECOM ICT Services GmbH. The testing service provided by CETECOM ICT Services GmbH has been rendered under the current "General Terms and Conditions for CETECOM ICT Services GmbH". CETECOM ICT Services GmbH will not be liable for any loss or damage resulting from false, inaccurate, inappropriate or incomplete product information provided by the customer. Under no circumstances does the CETECOM ICT Services GmbH test report include any endorsement or warranty regarding the functionality, quality or performance of any other product or service provided. Under no circumstances does the CETECOM ICT Services GmbH test report include or imply any product or service warranties from CETECOM ICT Services GmbH, including, without limitation, any implied warranties of merchantability, fitness for purpose, or non-infringement, all of which are expressly disclaimed by CETECOM ICT Services GmbH. All rights and remedies regarding vendor’s products and services for which CETECOM ICT Services GmbH has prepared this test report shall be provided by the party offering such products or services and not by CETECOM ICT Services GmbH. In no case this test report can be considered as a Letter of Approval. This test report is electronically signed and valid without handwritten signature. For verification of the electronic signatures, the public keys can be requested at the testing laboratory. This test report replaces the test report with the number 1-2432/16-01-03 and dated 2016-10-13. 2.2 Application details Date of receipt of order: 2016-09-07 Date of receipt of test item: 2016-09-08 Start of test: 2016-09-13 End of test: 2016-09-14 Person(s) present during the test: -/- Page 3 of 30

Test report no.: 1-2432/16-01-03-A 3 Test standard/s and references Test standard Date Description 47 CFR Part 15 -/- Title 47 of the Code of Federal Regulations; Chapter I; Part 15 - Radio frequency devices RSS - 210 Issue 8 December Spectrum Management and Telecommunications Radio Standards 2010 Specification - Licence-exempt Radio Apparatus (All Frequency Bands): Category I Equipment RSS - 210 Issue 8 February RSS-210, Amendment 1 — Licence-Exempt, Low-Power Radio Amendment 1 2015 Apparatus Operating in the Television Bands (February 2015) Guidance Version Description American national standard for methods of measurement of radio- ANSI C63.4-2014 -/- noise emissions from low-voltage electrical and electronic equipment in the range of 9 kHz to 40 GHz American national standard of procedures for compliance testing ANSI C63.10-2013 -/- of unlicensed wireless devices Page 4 of 30

Test report no.: 1-2432/16-01-03-A 4 Test environment Tnom +24 °C during room temperature tests Temperature : Tmax +70 °C during high temperature tests Tmin -25 °C during low temperature tests Relative humidity content : 55 % Barometric pressure : 1021 hpa Vnom 5.00 V DC by external power supply Power supply : Vmax 5.25 V Vmin 4.75 V 5 Test item 5.1 General description Kind of test item : RFID Reader Type identification : CPR74 HMN : -/- PMN : ID CPR74 HVIN : ID CPR74 FVIN : -/- S/N serial number : -/- HW hardware status : -/- SW software status : -/- Frequency : 13.56 MHz Type of radio transmission : single carrier Use of frequency spectrum : Type of modulation : N1N Number of channels : 1 Antenna : Integrated loop antenna Power supply : 5.0 V DC by external power supply Temperature range : -25°C to +70°C 5.2 Additional information The content of the following annexes is defined in the QA. It may be that not all of the listed annexes are necessary for this report, thus some values in between may be missing. Test setup- and EUT-photos are included in test report: 1-2432/16-01-1_AnnexB 1-2432/16-01-1_AnnexD 6 Test laboratories sub-contracted None Page 5 of 30

Test report no.: 1-2432/16-01-03-A 7 Description of the test setup Typically, the calibrations of the test apparatus are commissioned to and performed by an accredited calibration laboratory. The calibration intervals are determined in accordance with the DIN EN ISO/IEC 17025. In addition to the external calibrations, the laboratory executes comparison measurements with other calibrated test systems or effective verifications. Weekly chamber inspections and range calibrations are performed. Where possible, RF generating and signaling equipment as well as measuring receivers and analyzers are connected to an external high-precision 10 MHz reference (GPS-based or rubidium frequency standard). In order to simplify the identification of the equipment used at some special tests, some items of test equipment and ancillaries can be provided with an identifier or number in the equipment list below (Lab/Item). Agenda: Kind of Calibration k calibration / calibrated EK limited calibration ne not required (k, ev, izw, zw not required) zw cyclical maintenance (external cyclical maintenance) ev periodic self verification izw internal cyclical maintenance Ve long-term stability recognized g blocked for accredited testing vlkI! Attention: extended calibration interval NK! Attention: not calibrated *) next calibration ordered / currently in progress Page 6 of 30

Test report no.: 1-2432/16-01-03-A 7.1 Shielded semi anechoic chamber The radiated measurements are performed in vertical and horizontal plane in the frequency range from 9 kHz to 1 GHz in semi-anechoic chambers. The EUT is positioned on a non-conductive support with a height of 0.80 m above a conductive ground plane that covers the whole chamber. The receiving antennas are confirmed with specifications ANSI C63. These antennas can be moved over the height range between 1.0 m and 4.0 m in order to search for maximum field strength emitted from EUT. The measurement distances between EUT and receiving antennas are indicated in the test setups for the various frequency ranges. For each measurement, the EUT is rotated in all three axes until the maximum field strength is received. The wanted and unwanted emissions are received by spectrum analyzers where the detector modes and resolution bandwidths over various frequency ranges are set according to requirement ANSI C63. Measurement distance: tri-log antenna 10 meter FS = UR + CL + AF (FS-field strength; UR-voltage at the receiver; CL-loss of the cable; AF-antenna factor) Example calculation: FS [dBµV/m] = 12.35 [dBµV/m] + 1.90 [dB] + 16.80 [dB/m] = 31.05 [dBµV/m] (35.69 µV/m) Equipment table: Lab / INV. No Kind of Last Next No. Equipment Type Manufacturer Serial No. Item Cetecom Calibration Calibration Calibration 1 A Switch-Unit 3488A HP 2719A14505 300000368 ev -/- -/- DC power supply, 2 A 6032A HP 2920A04466 300000580 ne -/- -/- 60Vdc, 50A, 1200 W 3 A EMI Test Receiver ESCI 3 R&S 100083 300003312 k 08.03.2016 08.03.2017 Analyzer-Reference- A3509 07/0 4 A System (Harmonics ARS 16/1 SPS 300003314 Ve 02.02.2016 02.02.2018 0205 and Flicker) 5 A Antenna Tower Model 2175 ETS-Lindgren 64762 300003745 izw -/- -/- Positioning 6 A Model 2090 ETS-Lindgren 64672 300003746 izw -/- -/- Controller Turntable Interface- 7 A Model 105637 ETS-Lindgren 44583 300003747 izw -/- -/- Box TRILOG Broadband 8 A Test-Antenna 30 VULB9163 Schwarzbeck 295 300003787 k 25.04.2016 25.04.2018 MHz - 3 GHz 9 A Spectrum-Analyzer FSU26 R&S 200809 300003874 k 29.01.2016 29.01.2017 Page 7 of 30

Test report no.: 1-2432/16-01-03-A 7.2 Shielded fully anechoic chamber Measurement distance: loop antenna 3 meter FS = UR + CA + AF (FS-field strength; UR-voltage at the receiver; CA-loss of the signal path; AF-antenna factor) Example calculation: FS [dBµV/m] = 40.0 [dBµV/m] + (-35.8) [dB] + 32.9 [dB/m] = 37.1 [dBµV/m] (71.61 µV/m) Equipment table: Lab / INV. No Kind of Last Next No. Equipment Type Manufacturer Serial No. Item Cetecom Calibration Calibration Calibration DC power supply, 1 A 6032A HP 2818A03450 300001040 Ve 20.01.2015 20.01.2018 60Vdc, 50A, 1200 W 2 A Anechoic chamber FAC 3/5m MWB / TDK 87400/02 300000996 ev -/- -/- 3 A Switch / Control Unit 3488A HP * 300000199 ne -/- -/- Active Loop Antenna 4 A 6502 EMCO/2 8905-2342 300000256 k 24.06.2015 24.06.2017 10 kHz to 30 MHz 4U RF Switch 5 A L4491A Agilent Technologies MY50000037 300004509 ne -/- -/- Platform EMI Test Receiver 6 A ESR26 R&S 101376 300005063 vlKI! 13.09.2016 13.03.2018 9kHz-26,5GHz Page 8 of 30

Test report no.: 1-2432/16-01-03-A 7.3 Frequency error Equipment table: Lab / INV. No Kind of Last Next No. Equipment Type Manufacturer Serial No. Item Cetecom Calibration Calibration Calibration DC Power Supply 0 1 A 1108-32 Heiden Elektronik 001802 300001383 Ve 29.01.2014 29.01.2017 – 32V Temperature Test 2 A T-40/50 CTS GmbH 064023 300003540 ev 03.09.2015 03.09.2017 Chamber EMI Test Receiver 9 3 A kHz - 3 GHz incl. ESPI3 R&S 101713 300004059 k 26.01.2016 26.01.2017 Preselector 4 A Loop Antenna ESPI3 ZEG TS Steinfurt 101713 400001208 ev -/- -/- Page 9 of 30

Test report no.: 1-2432/16-01-03-A 8 Sequence of testing 8.1 Sequence of testing radiated spurious 9 kHz to 30 MHz Setup  The equipment is set up to simulate normal operation mode as described in the user manual or defined by the manufacturer.  If the EUT is a tabletop system, a 2-axis positioner with 1.5 m height is used.  If the EUT is a floor standing device, it is placed directly on the turn table.  Auxiliary equipment and cables are positioned to simulate normal operation conditions as described in ANSI C 63.4.  The AC power port of the EUT (if available) is connected to a power outlet below the turntable.  Measurement distance is 3 m (see ANSI C 63.4) – see test details.  EUT is set into operation. Premeasurement  The turntable rotates from 0° to 315° using 45° steps.  The antenna height is 1.5 m.  At each turntable position the analyzer sweeps with positive-peak detector to find the maximum of all emissions. Final measurement  Identified emissions during the premeasurement are maximized by the software by rotating the turntable from 0° to 360°. In case of the 2-axis positioner is used the elevation axis is also rotated from 0° to 360°.  The final measurement is done in the position (turntable and elevation) causing the highest emissions with quasi-peak (as described in ANSI C 63.4).  Final levels, frequency, measuring time, bandwidth, turntable position, correction factor, margin to the limit and limit will be recorded. A plot with the graph of the premeasurement and the limit is stored. Page 10 of 30

Test report no.: 1-2432/16-01-03-A 8.2 Sequence of testing radiated spurious 30 MHz to 1 GHz Setup  The equipment is set up to simulate normal operation mode as described in the user manual or defined by the manufacturer.  If the EUT is a tabletop system, a table with 0.8 m height is used, which is placed on the ground plane.  If the EUT is a floor standing device, it is placed on the ground plane with insulation between both.  Auxiliary equipment and cables are positioned to simulate normal operation conditions as described in ANSI C 63.4.  The AC power port of the EUT (if available) is connected to a power outlet below the turntable.  Measurement distance is 10 m or 3 m (see ANSI C 63.4) – see test details.  EUT is set into operation. Premeasurement  The turntable rotates from 0° to 315° using 45° steps.  The antenna is polarized vertical and horizontal.  The antenna height changes from 1 m to 3 m.  At each turntable position, antenna polarization and height the analyzer sweeps three times in peak to find the maximum of all emissions. Final measurement  The final measurement is performed for at least six highest peaks according to the requirements of the ANSI C63.4.  Based on antenna and turntable positions at which the peak values are measured the software maximize the peaks by changing turntable position ± 45° and antenna height between 1 and 4 m.  The final measurement is done with quasi-peak detector (as described in ANSI C 63.4).  Final levels, frequency, measuring time, bandwidth, antenna height, antenna polarization, turntable angle, correction factor, margin to the limit and limit are recorded. A plot with the graph of the premeasurement with marked maximum final results and the limit is stored. Page 11 of 30

Test report no.: 1-2432/16-01-03-A 9 Measurement uncertainty Measurement uncertainty Test case Uncertainty Occupied bandwidth ± used RBW Field strength of the fundamental ± 3 dB Field strength of the harmonics and spurious ± 3 dB Receiver spurious emissions and cabinet radiations ± 3 dB Conducted limits ± 2.6 dB Page 12 of 30

Test report no.: 1-2432/16-01-03-A 10 Summary of measurement results ☒ No deviations from the technical specifications were ascertained ☐ There were deviations from the technical specifications ascertained This test report is only a partial test report. The content and verdict of the performed test cases ☐ are listed below. TC Identifier Description Verdict Date Remark CFR Part 15 RF-Testing RSS 210 Issue 8 See table! 2016-10-25 -/- RSS Gen Issue 4 Test Temperature Power source specification Test case C NC NA NP Remark conditions conditions clause RSS Gen Issue 4 Occupied bandwidth Nominal Nominal ☒ ☐ ☐ ☐ -/- Field strength of the § 15.225 (a) fundamental Nominal Nominal ☒ ☐ ☐ ☐ -/- § 15.209 Field strength of the & harmonics and Nominal Nominal ☒ ☐ ☐ ☐ -/- § 15.225 (b-d) spurious Receiver spurious § 15.109 emissions and cabinet Nominal Nominal ☐ ☐ ☒ ☐ -/- radiations §15.107 §15.207 Conducted limits Nominal Nominal ☐ ☐ ☒ ☐ -/- Normal & Normal & § 15.225 (a) Frequency tolerance extreme extreme ☒ ☐ ☐ ☐ -/- conditions conditions Note: C Compliant NC Not compliant NA Not applicable NP Not performed 11 Additional comments Reference documents: None Special test descriptions: None Configuration descriptions: None Page 13 of 30

Test report no.: 1-2432/16-01-03-A 12 Measurement results 12.1 Occupied bandwidth Measurement: The emission bandwidth (x dB) is defined as the frequency range between two points, one above and one below the carrier frequency, at which the spectral density of the emission is attenuated x dB below the maximum in-band spectral density of the modulated signal. Measurement parameters Detector: Peak Resolution bandwidth: 1 % – 5 % of the occupied bandwidth Video bandwidth: ≥ 3x RBW Trace mode: Max hold Analyzer function: 99 % power function Used equipment: See chapter 7.3 A Measurement uncertainty: See chapter 9 Limit: IC for RSP-100 test report coversheet only Result: 99% emission bandwidth 159.6 kHz Page 14 of 30

Test report no.: 1-2432/16-01-03-A Plot: Plot 1: 99 % emission bandwidth * RBW 3 kHz Marker 1 [T1 ] * VBW 10 kHz 71.62 dBµV Ref 84.4 dBµV Att 50 dB SWT 25 ms 13.560084000 MHz Offset -52.6 dB OBW159.600000000 kHz 80 Temp 1 [T1 OBW] 1 46.03 dBµV A 70 13.481284000 MHz 1 PK Temp 2 [T1 OBW] MAXH 46.20 dBµV LVL 60 13.640884000 MHz 50 T1 T2 40 30 3DB 20 10 0 -10 Center 13.560084 MHz 20 kHz/ Span 200 kHz Date: 13.OCT.2016 10:25:22 Page 15 of 30

Test report no.: 1-2432/16-01-03-A 12.2 Field strength of the fundamental Measurement: The maximum detected field strength for the carrier signal. Measurement parameters Detector: Quasi peak / peak (worst case) Resolution bandwidth: 120 kHz Video bandwidth: ≥ 3x RBW Trace mode: Max hold Used equipment: See chapter 7.2 A Measurement uncertainty: See chapter 9 Limit: FCC & IC Frequency Field strength Measurement distance (MHz) (µV/m) (m) 13.553 to 13.567 15,848 (84 dBµV/m) 30 Recalculation: According to ANSI C63.10 Frequency Formula Correction value 𝑑nearfield 𝑑𝑙𝑖𝑚𝑖𝑡 FSlimit = FSmax −40 log ( ) − 20log⁡( ) 𝑑𝑚𝑒𝑎𝑠𝑢𝑟𝑒 𝑑𝑛𝑒𝑎𝑟𝑓𝑖𝑒𝑙𝑑 FSlimit is the calculation of field strength at the limit distance, 13.56 MHz expressed in dBµV/m -21.39 FSmax is the measured field strength, expressed in dBµV/m dnear field is the λ/2π distance dmeasure is the distance of the measurement point from EUT dlimit is the reference limit distance According to ANSI C63.10 Result: Field strength of the fundamental Frequency 13.56 MHz Distance @3m @ 30 m Measured / calculated value 75.9 dBµV/m 54.51 dBµV/m Page 16 of 30

Test report no.: 1-2432/16-01-03-A 12.3 Field strength of the harmonics and spurious Measurement: The maximum detected field strength for the harmonics and spurious. Measurement parameters Quasi peak / average or Detector: peak (worst case – pre-scan) F < 150 kHz: 200 Hz Resolution bandwidth: 150 kHz < F < 30 MHz: 9 kHz 30 MHz < F < 1 GHz: 120 kHz F < 150 kHz: 1 kHz Video bandwidth: 150 kHz < F < 30 MHz: 100 kHz 30 MHz < F < 1 GHz: 300 kHz Trace mode: Max hold Used equipment: See chapter 7.1 A / 7.2 A Measurement uncertainty: See chapter 9 Limit: FCC & IC Frequency Field strength Measurement distance (MHz) (dBµV/m) (m) 0.009 – 0.490 2400/F(kHz) 300 0.490 – 1.705 24000/F(kHz) 30 1.705 – 30 30 (29.5 dBµV/m) 30 30 – 88 100 (40 dBµV/m) 3 88 – 216 150 (43.5 dBµV/m) 3 216 – 960 200 (46 dBµV/m) 3 Note: For a reduced measurement distance, please take a look at the limit line and the ANSI C63.10-2013 sub clause 6.4 radiated emissions from unlicensed wireless devices below 30 MHz. Result: Detected emissions Frequency Resolution bandwidth Detector Detected value (MHz) (kHz) See plots! Page 17 of 30

Test report no.: 1-2432/16-01-03-A Plots: Plot 1: 9 kHz – 30 MHz, magnetic emissions 130 dBµV/m 120 110 100 90 80 70 60 50 FCC/Part 15C (15.209) - QPeak/3.0m/ 40 30 20 10 0 9kHz 100k 1M 10M 30MHz Frequency Plot 2: Spectrum mask (the limits are recalculated according to the ANSI C63.10-2013 sub clause 6.4) * RBW 10 kHz Marker 1 [T1 ] VBW 30 kHz 71.79 dBµV Ref 84.4 dBµV Att 60 dB SWT 20 ms 13.560000000 MHz Offset -52.6 dB 80 1 A 70 1 PK MAXH LVL 60 FCC15225 50 40 30 3DB 20 10 0 -10 Center 13.56 MHz 200 kHz/ Span 2 MHz Date: 13.OCT.2016 07:02:54 Page 18 of 30

Test report no.: 1-2432/16-01-03-A Plot 3: Spectrum mask, detail * RBW 10 kHz Marker 1 [T1 ] VBW 30 kHz 71.72 dBµV Ref 84.4 dBµV Att 60 dB SWT 2.5 ms 13.560400000 MHz Offset -52.6 dB 80 1 A 70 1 PK MAXH LVL 60 FCC15225 50 40 30 3DB 20 10 0 -10 Center 13.56 MHz 20 kHz/ Span 200 kHz Date: 13.OCT.2016 07:03:41 Page 19 of 30

Test report no.: 1-2432/16-01-03-A Plot 4: 30 MHz – 1 GHz, vertical and horizontal polarization 60 55 50 45 F CC _ 1 0 m_ B 40 Level in dBµV/m 35 30 25 20 15 10 5 0 30M 50 60 80 100M 200 300 400 500 8 0 0 1 ,0 5 G F re q u e n c y in H z Meas. Frequency QuasiPeak Limit Margin Bandwidth Height Azimuth Corr. Time Pol (MHz) (dBµV/m) (dBµV/m) (dB) (kHz) (cm) (deg) (dB) (ms) 36.902850 12.42 30.00 17.58 1000.0 120.000 178.0 V 117.0 13.9 40.654500 14.20 30.00 15.80 1000.0 120.000 103.0 V 269.0 14.0 43.999800 10.79 30.00 19.21 1000.0 120.000 101.0 V 161.0 13.9 46.144800 11.78 30.00 18.22 1000.0 120.000 104.0 V 53.0 13.6 67.816800 21.82 30.00 8.18 1000.0 120.000 272.0 V 140.0 8.9 878.991300 21.62 36.00 14.38 1000.0 120.000 200.0 H 320.0 23.8 Page 20 of 30

Test report no.: 1-2432/16-01-03-A 12.4 Frequency error Measurement: The maximum detected field strength for the spurious. Measurement parameters Detector: Peak detector Resolution bandwidth: 30 Hz / 100 Hz Video bandwidth: > RBW Trace mode: Max hold Used equipment: See chapter 7.3 A Measurement uncertainty: See chapter 9 Limit: FCC The frequency tolerance of the carrier signal shall be maintained within +/- 0.01% of the operating frequency over a temperature variation of -20 degrees to +50 degrees C at normal supply voltage, and for a variation in the primary supply voltage from 85% to 115% of the rated supply voltage at a temperature of 20 degrees C. (±1.356 kHz) Result: Temperature variation Frequency tolerance Measured frequency Conditions Result (MHz) 13.560116 -25 °C & 100% voltage compliant 13.560128 -20 °C & 100% voltage compliant 13.560144 -10 °C & 100% voltage compliant 13.560138 0 °C & 100% voltage compliant 13.560122 +10 °C & 100% voltage compliant 13.560102 +20 °C & 100% voltage compliant 13.560084 +30 °C & 100% voltage compliant 13.560084 +40 °C & 100% voltage compliant 13.560102 +50 °C & 100% voltage compliant 13.560152 +60 °C & 100% voltage compliant 13.560220 +70 °C & 100% voltage compliant Result: Voltage variation Frequency tolerance Measured frequency Temperature Result (MHz) 13.560110 +20 °C & 85% voltage compliant 13.560102 +20 °C & 100% voltage compliant 13.560108 +20 °C & 115% voltage compliant Page 21 of 30

Test report no.: 1-2432/16-01-03-A Plots: Plot 1: 100% voltage; 70°C RBW 30 Hz Marker 1 [T1 ] VBW 100 Hz 70.81 dBµV Ref 84.4 dBµV Att 60 dB SWT 1.15 s 13.560220000 MHz Offset -52.6 dB 80 A 1 70 1 PK MAXH LVL 60 50 40 30 3DB 20 10 0 -10 Center 13.560084 MHz 100 Hz/ Span 1 kHz Date: 13.OCT.2016 09:27:06 Plot 2: 100% voltage; 60°C RBW 30 Hz Marker 1 [T1 ] VBW 100 Hz 70.88 dBµV Ref 84.4 dBµV Att 60 dB SWT 1.15 s 13.560152000 MHz Offset -52.6 dB 80 A 1 70 1 PK MAXH LVL 60 50 40 30 3DB 20 10 0 -10 Center 13.560084 MHz 100 Hz/ Span 1 kHz Date: 13.OCT.2016 09:13:29 Page 22 of 30

Test report no.: 1-2432/16-01-03-A Plot 3: 100% voltage; 50°C RBW 30 Hz Marker 1 [T1 ] VBW 100 Hz 70.93 dBµV Ref 84.4 dBµV Att 60 dB SWT 1.15 s 13.560102000 MHz Offset -52.6 dB 80 A 1 70 1 PK MAXH LVL 60 50 40 30 3DB 20 10 0 -10 Center 13.560084 MHz 100 Hz/ Span 1 kHz Date: 13.OCT.2016 08:48:51 Plot 4: 100% voltage; 40°C RBW 30 Hz Marker 1 [T1 ] VBW 100 Hz 71.00 dBµV Ref 84.4 dBµV Att 60 dB SWT 1.15 s 13.560084000 MHz Offset -52.6 dB 80 A 1 70 1 PK MAXH LVL 60 50 40 30 3DB 20 10 0 -10 Center 13.560084 MHz 100 Hz/ Span 1 kHz Date: 13.OCT.2016 08:30:27 Page 23 of 30

Test report no.: 1-2432/16-01-03-A Plot 5: 100% voltage; 30°C RBW 30 Hz Marker 1 [T1 ] VBW 100 Hz 70.57 dBµV Ref 84.4 dBµV Att 60 dB SWT 1.15 s 13.560084000 MHz Offset -52.6 dB 80 A 1 70 1 PK MAXH LVL 60 50 40 30 3DB 20 10 0 -10 Center 13.560084 MHz 100 Hz/ Span 1 kHz Date: 13.OCT.2016 08:21:02 Plot 6: 100% voltage; 20°C RBW 30 Hz Marker 1 [T1 ] VBW 100 Hz 70.98 dBµV Ref 84.4 dBµV Att 60 dB SWT 1.15 s 13.560102000 MHz Offset -52.6 dB 80 A 1 70 1 PK MAXH LVL 60 50 40 30 3DB 20 10 0 -10 Center 13.560084 MHz 100 Hz/ Span 1 kHz Date: 13.OCT.2016 08:09:29 Page 24 of 30

Test report no.: 1-2432/16-01-03-A Plot 7: 100% voltage; 10°C RBW 30 Hz Marker 1 [T1 ] VBW 100 Hz 71.02 dBµV Ref 84.4 dBµV Att 60 dB SWT 1.15 s 13.560122000 MHz Offset -52.6 dB 80 A 1 70 1 PK MAXH LVL 60 50 40 30 3DB 20 10 0 -10 Center 13.560084 MHz 100 Hz/ Span 1 kHz Date: 13.OCT.2016 07:58:14 Plot 8: 100% voltage; 0°C RBW 30 Hz Marker 1 [T1 ] VBW 100 Hz 71.06 dBµV Ref 84.4 dBµV Att 60 dB SWT 1.15 s 13.560138000 MHz Offset -52.6 dB 80 A 1 70 1 PK MAXH LVL 60 50 40 30 3DB 20 10 0 -10 Center 13.560084 MHz 100 Hz/ Span 1 kHz Date: 13.OCT.2016 07:49:49 Page 25 of 30

Test report no.: 1-2432/16-01-03-A Plot 9: 100% voltage; -10°C RBW 30 Hz Marker 1 [T1 ] VBW 100 Hz 71.13 dBµV Ref 84.4 dBµV Att 60 dB SWT 1.15 s 13.560144000 MHz Offset -52.6 dB 80 A 1 70 1 PK MAXH LVL 60 50 40 30 3DB 20 10 0 -10 Center 13.560084 MHz 100 Hz/ Span 1 kHz Date: 13.OCT.2016 07:45:06 Plot 10: 100% voltage; -20°C RBW 30 Hz Marker 1 [T1 ] VBW 100 Hz 71.14 dBµV Ref 84.4 dBµV Att 60 dB SWT 1.15 s 13.560128000 MHz Offset -52.6 dB 80 A 1 70 1 PK MAXH LVL 60 50 40 30 3DB 20 10 0 -10 Center 13.560084 MHz 100 Hz/ Span 1 kHz Date: 13.OCT.2016 07:35:04 Page 26 of 30

Test report no.: 1-2432/16-01-03-A Plot 11: 100% voltage; -25°C RBW 30 Hz Marker 1 [T1 ] VBW 100 Hz 71.14 dBµV Ref 84.4 dBµV Att 60 dB SWT 1.15 s 13.560116000 MHz Offset -52.6 dB 80 A 1 70 1 PK MAXH LVL 60 50 40 30 3DB 20 10 0 -10 Center 13.560084 MHz 100 Hz/ Span 1 kHz Date: 13.OCT.2016 07:32:40 Plot 12: 115% voltage; 20°C RBW 30 Hz Marker 1 [T1 ] VBW 100 Hz 70.47 dBµV Ref 84.4 dBµV Att 60 dB SWT 1.15 s 13.560108000 MHz Offset -52.6 dB 80 A 1 70 1 PK MAXH LVL 60 50 40 30 3DB 20 10 0 -10 Center 13.560084 MHz 100 Hz/ Span 1 kHz Date: 13.OCT.2016 09:55:27 Page 27 of 30

Test report no.: 1-2432/16-01-03-A Plot 13: 100% voltage; 20°C RBW 30 Hz Marker 1 [T1 ] VBW 100 Hz 70.98 dBµV Ref 84.4 dBµV Att 60 dB SWT 1.15 s 13.560102000 MHz Offset -52.6 dB 80 A 1 70 1 PK MAXH LVL 60 50 40 30 3DB 20 10 0 -10 Center 13.560084 MHz 100 Hz/ Span 1 kHz Date: 13.OCT.2016 08:09:29 Plot 12: 85% voltage; 20°C RBW 30 Hz Marker 1 [T1 ] VBW 100 Hz 69.71 dBµV Ref 84.4 dBµV Att 60 dB SWT 1.15 s 13.560110000 MHz Offset -52.6 dB 80 A 1 70 1 PK MAXH LVL 60 50 40 30 3DB 20 10 0 -10 Center 13.560084 MHz 100 Hz/ Span 1 kHz Date: 13.OCT.2016 09:54:51 Page 28 of 30

Test report no.: 1-2432/16-01-03-A 13 Observations No observations except those reported with the single test cases have been made. Annex A Document history Version Applied changes Date of release Initial release 2016-10-13 A Updated range for power supply 2016-10-25 Annex B Further information Glossary AVG - Average DUT - Device under test EMC - Electromagnetic Compatibility EN - European Standard EUT - Equipment under test ETSI - European Telecommunications Standard Institute FCC - Federal Communication Commission FCC ID - Company Identifier at FCC HW - Hardware IC - Industry Canada Inv. No. - Inventory number N/A - Not applicable PP - Positive peak QP - Quasi peak S/N - Serial number SW - Software PMN - Product marketing name HMN - Host marketing name HVIN - Hardware version identification number FVIN - Firmware version identification number Page 29 of 30

Test report no.: 1-2432/16-01-03-A Annex C Accreditation Certificate Front side of certificate Back side of certificate Note: The current certificate including annex can be received from CETECOM ICT Services GmbH on request. Page 30 of 30


Document Created: 2016-10-25 07:46:31
Document Modified: 2016-10-25 07:46:31
© 2025 FCC.report
This site is not affiliated with or endorsed by the FCC