Class II Permissive Change Letter

FCC ID: PJIL17A0D080

Cover Letter(s)

Download: PDF
FCCID_408167

FCC ID : PJIL17A0D080 March 10, 2004 Federal Communications Commission Equipment Approval Services 7435 Oakland Mills Road Columbia, MD 21046 SUBJECT : ImageQuest Co., Ltd. FCC ID: PJIL17A0D080 Class II Permissive Change Orig. Grant Date: March 12, 2003 Gentlemen: Transmitted herewith, on behalf of ImageQuest Co., Ltd. is an application for a Class II Permissive Change Certification of the following 17-inch LCD Monitor: FCC ID : PJIL17A0D080 Model/Type : L70S/L17A0D080 The device is identical to the previously certified monitor except for the following: 1. Original LCD Panel and Power Board (LCD Panel, Manufacture : AU Optronics Model NO : M170EN05) (Power Board, Manufacture : FRONTEK Model NO : PL1742C02) 2. Alternate LCD Panel (LCD Panel, Manufacture : SAMSUNG Electronics Model No.: LTM170EU-L11) (Power Board, Manufacture : FEELUX Model No.: FIP-1704IQ) Attached is the applicant’s Cover Letter, External/Internal Photos, Test Set-Up Photos, FCC ID & Label Location, User Manual, Block Diagram and Test Report. Should you have any questions or comments concerning the above, please contact the undersigned. KI SOO KIM EMC MAMAGER cc: Mr. HEE JUNG KIM ------- R & D CENTER / MANAGER HYUNDAI C–TECH

FCC ID : PJIL17A0D080 • Solution for EMI We, ImageQuest CO.,LTD. , announce that all modifications will be incorporated into each unit sold in the U.S. 1. Attach a gasket on the main frame and main board to contact the lcd panel 2. Apply ferrite core to OSD signal line (Please refer to next page of the photographs for Solution for EMI) ImageQuest CO.,LTD. 2004. 3. 10 R & D CENTER / MANAGER HEE JUNG KIM HYUNDAI C–TECH

FCC ID : PJIL17A0D080 1. Attach a gasket on the main frame and main board to contact the lcd panel 2. Apply ferrite core to OSD signal line HYUNDAI C–TECH


Document Created: 2004-03-25 07:45:11
Document Modified: 2004-03-25 07:45:11
© 2024 FCC.report
This site is not affiliated with or endorsed by the FCC