Class II permissive change with modification report

FCC ID: PJIL17A0D080

Cover Letter(s)

Download: PDF
FCCID_351718

FCC ID : PJIL17A0D080 August 21, 2003 Federal Communications Commission Equipment Approval Services 7435 Oakland Mills Road Columbia, MD 21046 SUBJECT : ImageQuest Co., Ltd. FCC ID: PJIL17A0D080 Class II Permissive Change Orig. Grant Date: March 12, 2003 Gentlemen: Transmitted herewith, on behalf of ImageQuest Co., Ltd. is an application for a Class II Permissive Change Certification of the following 17-inch LCD Monitor: FCC ID : PJIL17A0D080 Model/Type : L70S/L17A0D080 The device is identical to the previously certified monitor except for the following: 1. Original LCD Panel (Manufacture : AU Optronics Model NO : M170EN05) 2. Alternate LCD Panel (Manufacture : Hyundai Display Technology.INC Model No. : HT17E12-200) Attached is the applicant’s Cover Letter, External/Internal Photos, Test Set-Up Photos, FCC ID & Label Location, User Manual, Schematic and Test Report. Should you have any questions or comments concerning the above, please contact the undersigned. KI SOO KIM EMC MAMAGER cc: Mr. HEE JUNG KIM ------- R & D CENTER / MANAGER HYUNDAI C–TECH

FCC ID : PJIL17A0D080 • Solution for EMI We, ImageQuest CO.,LTD. , announce that all modifications will be incorporated into each unit sold in the U.S. 1. Attach a gasket on the Main Frame to contact a LCD panel 2. Attach a copper foil between Main Frame and LCD panel 3. Apply a ferrite Core to the OSD board signal cable (Please refer to next page of the photographs for Solution for EMI) ImageQuest CO.,LTD. 2003.8.20 R & D CENTER / MANAGER HEE JUNG KIM HYUNDAI C–TECH

FCC ID : PJIL17A0D080 1. Attach a gasket on the Main Frame to contact a LCD panel 2. Attach a copper foil between Main Frame and LCD panel 4. Apply a ferrite Core to the OSD board signal cable HYUNDAI C–TECH


Document Created: 2003-08-27 21:00:30
Document Modified: 2003-08-27 21:00:30
© 2024 FCC.report
This site is not affiliated with or endorsed by the FCC