Cell block letter

FCC ID: PH3DJ-296T

Attestation Statements

Download: PDF
FCCID_234095

360 Herndon Parkway Suite 1400 Herndon, VA 20170 http://www.rheintech.com APPENDIX C: CELL BLOCK ATTESTATION LETTER(S) (IF APPLICABLE) Scanning Receiver Certification Report Page 20 Alinco, Inc. FCC ID: PH3DJ-296T Work Order: 2002032 / QRTL02-151DF Rev: 1 3/21/02

"Shin Dat Building"9F,1—2—6,DofimahamaKite—ku, ALINGD 0s530—0001,1opan Fax : 06(179702156 Phone : 0647972134 mcoreoraten Febizt2002 Federal Communications Commissions analog Dear Sir or Madam, This is to dectare that the device in application PH3 DJ—296T has been blocked for any and all access of 824.00 to $19.9975MH and 869.00 to 894.9975Mtz ‘The device uses double super heterodyne as a receiver circuit and frequency is gonerated. with PLL synthesizer circuitry. The first local oscillation frequeney is between 185.150 and 219.145Mh range, andactual receiving frequencies ofthis devico is 216000 to 249.999MHz. In addition, the harmonics are filtered out before the signal goes into the mixer circuit, therefore 800MH range can‘t be received. The low—pass filters are sot for 2B0MHas a cut—off froqueney. The CPU used in this device, our parts code 1C9 XA09IG, venders code MS82GTMBLGP is exclusively programmed and burned for US export model. Alinco, Inc exports solely this version to the US market, and this CPU can‘t be modified by any means to receive the cellular frequencies declared above. Moreaver, the entirecircuitry of this device is not designed to cover the cellular frequencies anyway To my best of knowledge informedfrom the chiefengineer in charge of PH3 DJ+ 206T, above declared is true Respectfully, barnbara Kazuhiro Kusubara General manager, Production Section, Alinco, Inc. Electronics Division


Document Created: 2002-03-23 16:34:00
Document Modified: 2002-03-23 16:34:00
© 2025 FCC.report
This site is not affiliated with or endorsed by the FCC