Test Report DFS

FCC ID: PD98260NGHU

Test Report

Download: PDF
FCCID_2776806

TESTING CERT #3478.01 TEST REPORT EUT Description WLAN and BT, 2x2 PCIe M.2 adapter card Brand Name Intel Model Name Intel® Dual-Band Wireless-AC 8260 TA#: H76739-001 WF MAC: 34:13:E8:42:D1:B4 Serial Number BT MAC: 34:13:E8:42:D1:B8 (see section 4) FCC ID: PD98260NGH / PD98260NGHU FCC/IC ID IC ID: 1000M-8260NGH Antenna type SkyCross WIMAX/WLAN Reference Antenna Hardware Version HW: TF5 / HVIN : 8260NGWH Software Version Op SW: Intel Proset Version 18.10 Date of Sample Receipt 2015-06-01 Date of Test 2015-07-16 802.11 a/n/ac Wireless LAN + BT 1.2 Features (see section 5) Applicant Intel Mobile Communications 100 Center Point Circle, Suite 200 Address Columbia, South Carolina 29210 USA Contact Person Steven Hackett Telephone/Fax/ Email steven.c.hackett@intel.com FCC CFR Title 47 Part 15E Reference Standards RSS 247 issue 1 (see section 1) Test Report number 15051101.TR07 Revision Control Rev. 00 The test results relate only to the samples tested. The test report shall not be reproduced in full, without written approval of the laboratory. Issued by Reviewed by Approved by Digitally signed by Jose M. Digitally signed by Nawfal ASRIH FORTES DN: cn=Nawfal ASRIH, o=Intel Digitally signed by Olivier FARGANT DN: cn=Jose M. FORTES, o=Intel Mobile Communications, DN: cn=Olivier FARGANT, o=Intel Mobile Communications, ou=Wireless RF Lab, Mobile Communications, ou=WRF Lab, ou=WRF Lab, email=nawfal.asrih@intel.com, email=olivier.fargant@intel.com, c=FR c=FR Date: 2015.08.19 18:38:14 +02'00' email=jose.m.fortes.lopez@intel.c Date: 2015.09.09 18:41:03 +02'00' om, c=FR Adobe Acrobat DC version: Date: 2015.09.09 11:00:08 +02'00' 2015.006.30060 Olivier FARGANT Jose M. FORTES Nawfal ASRIH (Test operator) (Technical Manager) (Laboratory Manager) Intel Mobile Communications France S.A.S – WRF Lab 425 rue de Goa – Cargo B6 – 06600, Antibes, France Tel. +33493001400 / Fax +33493001401

Test Report N°15051101.TR07 Rev. 00 Table of Contents 1. Standards, reference documents and applicable test methods ............................................... 3 2. General conditions, competences and guarantees .................................................................... 3 3. Environmental Conditions............................................................................................................. 3 4. Test samples ................................................................................................................................... 4 5. EUT features ................................................................................................................................... 4 6. Remarks and comments ................................................................................................................ 4 7. Test Verdicts summary .................................................................................................................. 5 8. Document Revision History .......................................................................................................... 5 Annex A. Test & System Description ............................................................................................. 6 A.1 TEST CONDITIONS ........................................................................................................................................ 6 A.2 MEASUREMENT SYSTEM ................................................................................................................................ 6 A.3 TEST EQUIPMENT LIST ................................................................................................................................... 7 A.4 MEASUREMENT UNCERTAINTY EVALUATION...................................................................................................... 7 Annex B. Test Results ...................................................................................................................... 8 B.1 TEST RESULTS FOR DYNAMIC FREQUENCY SELECTION (DFS) ................................................................................. 8 Annex C. Photographs ................................................................................................................... 12 FO-014: Test Report 2 of 14 Printed copies are not controlled documents

Test Report N°15051101.TR07 Rev. 00 1. Standards, reference documents and applicable test methods 1. FCC 47 CFR part 15 - Subpart E – Unlicensed National Information Infrastructure Devices. 2. 905462 D02 UNII DFS Compliance Procedures New Rules v01r02 – Compliance measurement procedures for unlicenced-nationnal information infrastructure devices operating in the 5250-5350 MHz and 5470-5725 MHz bands incorporating dynamic frequency selection. 3. RSS-247 issue 1 — Digital Transmission Systems (DTSs), Frequency Hopping Systems (FHSs) and Licence-Exempt Local Area Network (LE-LAN) Devices 4. ANSI C63.10-2009 American National Standard of Procedures for Compliance Testing of Unlicensed Wireless Devices. 2. General conditions, competences and guarantees  Intel Mobile Communications Wireless RF Lab (Intel WRF Lab) is a testing laboratory accredited by the American Association for Laboratory Accreditation (A2LA).  Intel Mobile Communications Wireless RF Lab (Intel WRF Lab) is an Accredited Test Firm listed by the FCC, with Designation Number FR0011.  Intel Mobile Communications Wireless RF Lab (Intel WRF Lab) is a Registered Test Site listed by IC, with IC Assigned Code 1000Y.  Intel WRF Lab only provides testing services and is committed to providing reliable, unbiased test results and interpretations.  Intel WRF Lab is liable to the client for the maintenance of the confidentiality of all information related to the item under test and the results of the test.  Intel WRF Lab has developed calibration and proficiency programs for its measurement equipment to ensure correlated and reliable results to its customers.  This report is only referred to the item that has undergone the test.  This report does not imply an approval of the product by the Certification Bodies or competent Authorities.  Complete or partial reproduction of the report cannot be made without written permission of Intel WRF Lab. 3. Environmental Conditions  At the site where the measurements were performed the following limits were not exceeded during the tests: Temperature 22ºC ± 2ºC Humidity 55% ± 5% FO-014: Test Report 3 of 14 Printed copies are not controlled documents

Test Report N°15051101.TR07 Rev. 00 4. Test samples Date of Sample Control # Description Model Serial # reception WiFi/BT High WF MAC: 15051101.S22 8260NGW H 2015-06-01 End Module 34:13:E8:42:D1:B4 Extender PCB00496 15051101.S06 - 2015-05-12 board Ver0.1, Step-02 #01 Switching power supply 15051101.S11 SPU60-102 07990499 1249 2015-05-12 SINPRO 5V 6A 15051101.S09 Laptop DELL E5440 9FSYN32 2015-05-12 NA: Not Applicable 5. EUT features These are the detailed bands and modes supported by the Equipment Under Test: 802.11b/g/n 2.4GHz (2400.0 – 2483.5 MHz) 802.11a/n/ac 5.3GHz (5250.0 – 5350.0 MHz) 5.6GHz (5470.0 – 5725.0 MHz) 5.8GHz (5725.0 – 5850.0 MHz) EDR2/ EDR3/BLE 2.4GHz (2400.0 – 2483.5 MHz) 6. Remarks and comments 1. The operating mode of the sample is only client without radar detection. 2. The maximum antenna gain is 5dBi FO-014: Test Report 4 of 14 Printed copies are not controlled documents

Test Report N°15051101.TR07 Rev. 00 7. Test Verdicts summary FCC part 15.407 (h) (2) Test name Verdict Non Occupancy Period P DFS Detection Threshold NA Channel Availability Check Time NA Uniform Spreading NA U-NII Detection Bandwidth NA DFS Detection Threshold NA Channel Closing Transmission Time P Channel Move Time P U-NII Detection Bandwidth NA P: Pass F: Fail NM: Not Measured NA: Not Applicable 8. Document Revision History Revision # Date Modified by Details Rev. 00 2015-08-19 O. Fargant First Issue FO-014: Test Report 5 of 14 Printed copies are not controlled documents

Test Report N°15051101.TR07 Rev. 00 Annex A. Test & System Description A.1 Test Conditions The EUT power supply was provided by the Extender test board, Vnominal = 3.3Vdc. The Intel ProSet Wifi software was used to set the EUT in normal operation mode. A.2 Measurement system Measurements were performed using the following setups, made in accordance to the general provisions of 905462 D02 UNII DFS Compliance Procedures New Rules v01r02. The DUT was installed in a test fixture and this test fixture is connected to a laptop computer and AC/DC power adapter. A second laptop computer was used to configure the access point on the DFS channels, a channel was selected randomly by the access point. To enable channel loading, this second laptop computer is also used as a server host, a video was streamed on the UUT. Conducted Setup FO-014: Test Report 6 of 14 Printed copies are not controlled documents

Test Report N°15051101.TR07 Rev. 00 A.3 Test Equipment List Conducted Setup Cal. Due ID# Device Type/Model Serial Number Manufacturer Cal. Date Date Rohde & 0033 Spectrum analyzer FSV40 101425 2015-03-25 2017-03-25 Schwarz Vector Signal Rohde & 0017 SMJ100A 100458 2013-09-19 2015-09-19 Generator Schwarz Rohde & 0312 Digital Oscilloscope RTE1052 101135 2015-05-25 2017-03-25 Schwarz 0261 Access point* Aironet IOS FTX134390GV Cisco NA NA - Laptop DELL Lattitude 5440 - DELL NA NA *: FCC ID: LDK102061 A.4 Measurement Uncertainty Evaluation The system uncertainty evaluation is shown in the below table: Measurement type Uncertainty Timing domain +- 1ms FO-014: Test Report 7 of 14 Printed copies are not controlled documents

Test Report N°15051101.TR07 Rev. 00 Annex B. Test Results B.1 Test results for Dynamic Frequency Selection (DFS) Test procedure The setup below was used to measure verify measure the Non Occupancy Period, Channel Closing Transmission Time and Channel Move Time. Before sending the radar signal with the vector signal generator, the video streaming is launched to establish the channel loading. The Non Occupancy Period is observed on the spectrum analyzer, and the radar signal, the Channel Closing Transmission Time and Channel Move Time are observed on the oscilloscope. Results tables Tested Channel: 100, Frequency: 5500 MHz Test item Results Limit 200 milliseconds + an aggregate Channel Closing Transmission Time < 37.65 ms of 60milliseconds over remaining 10 seconds period. Channel Move Time 37.65 ms 10 seconds Non-occupancy period > 30 minutes Minimum 30 minutes FO-014: Test Report 8 of 14 Printed copies are not controlled documents

Test Report N°15051101.TR07 Rev. 00 Results screenshot 10 Seconds capture after radar signal This zoomed screenshot above shows that no transmission from the EUT occur after 200ms following the radar signal. FO-014: Test Report 9 of 14 Printed copies are not controlled documents

Test Report N°15051101.TR07 Rev. 00 Zoom view to show the channel move time On the screenshot above, the cursors are placed between the latest radar signal and the latest data packet transmitted by the EUT to the master device. The time delta value show the channel move time, here the value is 37.65 ms. FO-014: Test Report 10 of 14 Printed copies are not controlled documents

Test Report N°15051101.TR07 Rev. 00 Spectrum view of the Non-occupancy period measurement The screenshot above show the Non occupancy period during 30 minutes. No transmission from the EUT occurs during this period. FO-014: Test Report 11 of 14 Printed copies are not controlled documents


Document Created: 2015-09-09 18:41:03
Document Modified: 2015-09-09 18:41:03
© 2025 FCC.report
This site is not affiliated with or endorsed by the FCC