RT response

FCC ID: OWDTR-0161-E

Cover Letter(s)

Download: PDF
FCCID_4475866

Please revise the PCB and TNB test reports to confirm if, for SRE measurements, the EUT’s antenna port(s) was terminated in a 50 ohm load, and case radiation was measured, or if a (transmit) antenna was attached to the EUT during the SRE measurements. If the latter, please identify the antenna used. Response: The highest gain antenna for a given band was used for the radiated spurious emissions testing. Antenna, Yagi, UHF-L 375-403 MHz,10dB Gain AN-025137-003 AN-025137-003 12.15 dBi Antenna, Yagi, UHF-L 406-440 MHz,9dB Gain AN-025137-004 AN-025137-004 11.15 dBi Antenna, Yagi, UHF-H 440-480 MHz,10dB Gain AN-025137-005 AN-025137-005 12.15 dBi Antenna, Yagi, UHF-H 470-512 MHz,10dB Gain AN-025137-006 AN-025137-006 12.15 dBi Antenna,Yagi,700 MHz,10dB Gain AN-025137-007 AN-025137-007 12.15 dBi ANTENNA, YAGI, 800 MHZ, 10 dB GAIN AN-025137-008 AN-025137-008 12.15 dBi Antenna,Yagi,900 MHz,10dB Gain AN-025137-009 AN-025137-009 12.15 dBi ANTENNA,VHF,136-174 MHZ,6DB,LOG PERIODIC AN-025137-011 AN-025137-011 8.15 dBi Low Band Mobile Antenna 30-35 MHz NMO DC ground AN-125001--002 AN-025127-101 2.15 dBi Low Band Mobile Antenna 45-48 MHz NMO DC ground AN-125001-002 AN-025127-105 2.15 dBi ANTENNA,39-46 MHZ,LOW BAND MOBILE,NMO,DC AN-125001-002 AN-025127-107 2.15 dBi


Document Created: 2019-10-09 10:47:18
Document Modified: 2019-10-09 10:47:18
© 2025 FCC.report
This site is not affiliated with or endorsed by the FCC