FCC15. 247-68.930.14.004.01

FCC ID: OU9LS208-B06

Test Report

Download: PDF
FCCID_2507240

Report Number: 68.930.14.004.01 FCC - TEST REPORT Report Number : 68.930.14.004.01 Date of Issue: December 25, 2014 Model : LS208-B6 Product Type : Body Fat Analyzer Applicant : Guangdong Transtek Medical Electronics Co., Ltd Address : Zone A, 5/F., Investment Building, No. 12 Huizhan East Rd., Torch Development District, Zhongshan, Guangdong, China 528437 Production Facility : Guangdong Transtek Medical Electronics Co., Ltd Address : Zone A, 5/F., Investment Building, No. 12 Huizhan East Rd., Torch Development District, Zhongshan, Guangdong, China 528437 Test Result :  Positive  Negative Total pages including Appendices : 23 TÜV SÜD Certification and Testing (China) Co., Ltd. Shenzhen Branch is a subcontractor to TÜV SÜD Product Service GmbH according to the principles outlined in ISO 17025. TÜV SÜD Certification and Testing (China) Co., Ltd. Shenzhen Branch reports apply only to the specific samples tested under stated test conditions. Construction of the actual test samples has been documented. It is the manufacturer's responsibility to assure that additional production units of this model are manufactured with identical electrical and mechanical components. The manufacturer/importer is responsible to the Competent Authorities in Europe for any modifications made to the production units which result in non-compliance to the relevant regulations. TÜV SÜD Certification and Testing (China) Co., Ltd. Shenzhen Branch shall have no liability for any deductions, inferences or generalizations drawn by the client or others from TÜV SÜD Certification and Testing (China) Co., Ltd. Shenzhen Branch issued reports. This report is the confidential property of the client. As a mutual protection to our clients, the public and ourselves, extracts from the test report shall not be reproduced except in full without our written approval EMC_SZ_FR_21.00 FCC TÜV SÜD Certification and Testing (China) Co., Ltd. Shenzhen Branch Page 1 of 23 Building 12&13, Zhiheng Wisdomland Business Park, Nantou Checkpoint Road 2, Nanshan District, Release 2014-03-20 Shenzhen City, 518052, P. R. China Tel. +86 755 8828 6998, Fax: +86 755 8828 5299

Report Number: 68.930.14.004.01 1 Table of Contents 1 Table of Contents ................................................................................................................................................................... 2 2 Details about the Test Laboratory .......................................................................................................................................... 3 3 Description of the Equipment Under Test ............................................................................................................................. 4 4 Summary of Test Standards ................................................................................................................................................... 5 5 Summary of Test Results ....................................................................................................................................................... 6 6 General Remarks.................................................................................................................................................................... 7 7 Test Setups ............................................................................................................................................................................. 8 8 Systems test configuration ..................................................................................................................................................... 9 9 Technical Requirement ........................................................................................................................................................ 10 9.1 Conducted peak output power ..................................................................................................................................... 10 9.2 Power spectral density................................................................................................................................................. 11 9.3 6 dB Bandwidth .......................................................................................................................................................... 12 9.4 Spurious RF conducted emissions ............................................................................................................................... 14 9.5 Band edge testing ........................................................................................................................................................ 18 9.6 Spurious radiated emissions for transmitter ................................................................................................................ 20 10 Test Equipment List ............................................................................................................................................................. 22 11 System Measurement Uncertainty ....................................................................................................................................... 23 EMC_SZ_FR_21.00 FCC TÜV SÜD Certification and Testing (China) Co., Ltd. Shenzhen Branch Page 2 of 23 Building 12&13, Zhiheng Wisdomland Business Park, Nantou Checkpoint Road 2, Nanshan District, Release 2014-03-20 Shenzhen City, 518052, P. R. China Tel. +86 755 8828 6998, Fax: +86 755 8828 5299

Report Number: 68.930.14.004.01 2 Details about the Test Laboratory Details about the Test Laboratory Test Site 1 Company name: TÜV SÜD Certification and Testing (China) Co., Ltd. Shenzhen Branch Building 12&13, Zhiheng Wisdomland Business Park, Nantou Checkpoint Road 2, Nanshan District, 518052, Shenzhen,P.R.C. Telephone: 86 755 8828 6998 Fax: 86 755 8828 5299 Test Site 2 Company name: Audix Technology (shenzhen) Co.,Ltd Block Shenzhen, Science & Industry Park, Nantou, Shenzhen, Guangdong, China Telephone: 86 755 2663 9496 Fax: 86 755 2663 2877 EMC_SZ_FR_21.00 FCC TÜV SÜD Certification and Testing (China) Co., Ltd. Shenzhen Branch Page 3 of 23 Building 12&13, Zhiheng Wisdomland Business Park, Nantou Checkpoint Road 2, Nanshan District, Release 2014-03-20 Shenzhen City, 518052, P. R. China Tel. +86 755 8828 6998, Fax: +86 755 8828 5299

Report Number: 68.930.14.004.01 3 Description of the Equipment Under Test Product: Body Fat Analyzer Model no.: LS208-B6 FCC ID: OU9LS208-B06 Options and accessories: NIL Rating: DC6.0V (Supplied by 4X1.5V AAA battery) RF Transmission 2402-2480MHz Frequency: No. of Operated Channel: 40 Modulation: GFSK Antenna Type: PIFA Antenna Gain: 0dBi Description of the EUT: The Equipment Under Test (EUT) is a Bluetooth body fat analyzer EMC_SZ_FR_21.00 FCC TÜV SÜD Certification and Testing (China) Co., Ltd. Shenzhen Branch Page 4 of 23 Building 12&13, Zhiheng Wisdomland Business Park, Nantou Checkpoint Road 2, Nanshan District, Release 2014-03-20 Shenzhen City, 518052, P. R. China Tel. +86 755 8828 6998, Fax: +86 755 8828 5299

Report Number: 68.930.14.004.01 4 Summary of Test Standards Test Standards FCC Part 15 Subpart C PART 15 - RADIO FREQUENCY DEVICES 10-1-2014 Edition Subpart C - Intentional Radiators All the test methods were according to KDB558074 D01 DTS Meas Guidance v03r02 issued by FCC on July 05, 2014 and ANSI C63.10 (2009). EMC_SZ_FR_21.00 FCC TÜV SÜD Certification and Testing (China) Co., Ltd. Shenzhen Branch Page 5 of 23 Building 12&13, Zhiheng Wisdomland Business Park, Nantou Checkpoint Road 2, Nanshan District, Release 2014-03-20 Shenzhen City, 518052, P. R. China Tel. +86 755 8828 6998, Fax: +86 755 8828 5299

Report Number: 68.930.14.004.01 5 Summary of Test Results Technical Requirements FCC Part 15 Subpart C Test Condition Pages Test Site Test Result §15.207 Conducted emission AC --- --- N/A power port §15.247(b)(1) Conducted peak output 10 Site 2 Pass power §15.247(e) Power spectral density 11 Site 2 Pass §15.247(a)(2) 6dB bandwidth 12 Site 2 Pass §15.247(a)(1) 20dB bandwidth and --- --- N/A 99% Occupied Bandwidth §15.247(a)(1) Carrier frequency --- --- N/A separation §15.247(a)(1)(iii) Number of hopping --- --- N/A frequencies §15.247(a)(1)(iii) Dwell Time --- --- N/A §15.247(d) Spurious RF conducted 14 Site 2 Pass emissions §15.247(d) Band edge 18 Site 2 Pass §15.247(d) & §15.209 Spurious radiated 20 Site 2 Pass &15.205 emissions for transmitter §15.203 Antenna requirement See note 2 Pass Note 1: N/A=Not Applicable. Note 2: The EUT uses a permanently PIFA antenna, which gain is 0dBi. In accordance to §15.203, It is considered sufficiently to comply with the provisions of this section. EMC_SZ_FR_21.00 FCC TÜV SÜD Certification and Testing (China) Co., Ltd. Shenzhen Branch Page 6 of 23 Building 12&13, Zhiheng Wisdomland Business Park, Nantou Checkpoint Road 2, Nanshan District, Release 2014-03-20 Shenzhen City, 518052, P. R. China Tel. +86 755 8828 6998, Fax: +86 755 8828 5299

Report Number: 68.930.14.004.01 6 General Remarks Remarks This submittal(s) (test report) is intended for FCC ID: OU9LS208-B06 complies with Section 15.207, 15.209, 15.247 of the FCC Part 15, Subpart C Rules. SUMMARY: All tests according to the regulations cited on page 5 were  - Performed  - Not Performed The Equipment Under Test  - Fulfills the general approval requirements.  - Does not fulfill the general approval requirements. Sample Received Date: November 27, 2014 Testing Start Date: November 28, 2014 Testing End Date: December 15, 2014 TÜV SÜD Certification and Testing (China) Co., Ltd. Shenzhen Branch Reviewed by: Prepared by: Tested by: _______________________ _______________________ _______________________ Phoebe Hu Felix Li Leo Li EMC Project Manager EMC Project Engineer EMC Test Engineer EMC_SZ_FR_21.00 FCC TÜV SÜD Certification and Testing (China) Co., Ltd. Shenzhen Branch Page 7 of 23 Building 12&13, Zhiheng Wisdomland Business Park, Nantou Checkpoint Road 2, Nanshan District, Release 2014-03-20 Shenzhen City, 518052, P. R. China Tel. +86 755 8828 6998, Fax: +86 755 8828 5299

Report Number: 68.930.14.004.01 7 Test Setups 7.1 Radiated test setups 7.2 Conducted RF test setups Measuring Receiver EUT EMC_SZ_FR_21.00 FCC TÜV SÜD Certification and Testing (China) Co., Ltd. Shenzhen Branch Page 8 of 23 Building 12&13, Zhiheng Wisdomland Business Park, Nantou Checkpoint Road 2, Nanshan District, Release 2014-03-20 Shenzhen City, 518052, P. R. China Tel. +86 755 8828 6998, Fax: +86 755 8828 5299

Report Number: 68.930.14.004.01 8 Systems test configuration Auxiliary Equipment Used during Test: DESCRIPTION MANUFACTURER MODEL NO.(SHIELD) S/N(LENGTH) NoteBook Lenovo X220 --- Test software: BLE-CC254x-1.2.1 - Btool, which used to control the EUT in continues transmitting mode The system was configured to channel 0, 19, and 39 for the test. EMC_SZ_FR_21.00 FCC TÜV SÜD Certification and Testing (China) Co., Ltd. Shenzhen Branch Page 9 of 23 Building 12&13, Zhiheng Wisdomland Business Park, Nantou Checkpoint Road 2, Nanshan District, Release 2014-03-20 Shenzhen City, 518052, P. R. China Tel. +86 755 8828 6998, Fax: +86 755 8828 5299

Report Number: 68.930.14.004.01 9 Technical Requirement 9.1 Conducted peak output power Test Method 1. Use the following spectrum analyzer settings: RBW > the 6 dB bandwidth of the emission being measured, VBW≥3RBW, Span≥3RBW Sweep = auto, Detector function = peak, Trace = max hold. 2. Add a correction factor to the display. 3. Allow the trace to stabilize. Use the marker-to-peak function to set the marker to the peak of the emission. The indicated level is the peak output power. Limits According to §15.247 (b) (1), conducted peak output power limit as below: Frequency Range Limit Limit MHz W dBm 2400-2483.5 ≤1 ≤30 Test Result Conducted Peak Frequency Output Power Result MHz dBm Low channel 2402MHz -2.54 Pass Middle channel 2440MHz -2.31 Pass High channel 2480MHz -2.77 Pass EMC_SZ_FR_21.00 FCC TÜV SÜD Certification and Testing (China) Co., Ltd. Shenzhen Branch Page 10 of 23 Building 12&13, Zhiheng Wisdomland Business Park, Nantou Checkpoint Road 2, Nanshan District, Release 2014-03-20 Shenzhen City, 518052, P. R. China Tel. +86 755 8828 6998, Fax: +86 755 8828 5299

Report Number: 68.930.14.004.01 9.2 Power spectral density Test Method This procedure shall be used if maximum peak conducted output power was used to demonstrate compliance: 1. Set analyzer center frequency to DTS channel center frequency. RBW=3kHz,VBW≥3RBW,Span=1.5 times DTS bandwidth, Detector=Peak, Sweep=auto, Trace= max hold 2. Allow trace to fully stabilize, use the peak marker function to determine the maximum amplitude level within the RBW . 3. Repeat above procedures until other frequencies measured were completed Limit Limit [dBm] ≤8 Test Result Frequency Power spectral Limit Result MHz density dBm 2402 -14.07 8 Pass 2440 -13.69 8 Pass 2480 -14.34 8 Pass EMC_SZ_FR_21.00 FCC TÜV SÜD Certification and Testing (China) Co., Ltd. Shenzhen Branch Page 11 of 23 Building 12&13, Zhiheng Wisdomland Business Park, Nantou Checkpoint Road 2, Nanshan District, Release 2014-03-20 Shenzhen City, 518052, P. R. China Tel. +86 755 8828 6998, Fax: +86 755 8828 5299

Report Number: 68.930.14.004.01 9.3 6 dB Bandwidth Test Method 1. Use the following spectrum analyzer settings: RBW=100K, VBW≥3RBW, Sweep = auto, Detector function = peak, Trace = max hold 2. 2. Use the automatic bandwidth measurement capability of an instrument, may be employed using the X dB bandwidth mode with X set to 6 dB, care shall be taken so that the bandwidth measurement is not influenced by any intermediate power nulls in the fundamental emission that might be ≥ 6 dB. 3. Allow the trace to stabilize, record the X dB Bandwidth value. Limit Limit [kHz] ≥500 Test result Frequency 6 dB Bandwidth Limit Result MHz kHz kHz 2402 664.3 ≥500 Pass 2440 686.0 ≥500 Pass 2480 591.0 ≥500 Pass EMC_SZ_FR_21.00 FCC TÜV SÜD Certification and Testing (China) Co., Ltd. Shenzhen Branch Page 12 of 23 Building 12&13, Zhiheng Wisdomland Business Park, Nantou Checkpoint Road 2, Nanshan District, Release 2014-03-20 Shenzhen City, 518052, P. R. China Tel. +86 755 8828 6998, Fax: +86 755 8828 5299

Report Number: 68.930.14.004.01 EMC_SZ_FR_21.00 FCC TÜV SÜD Certification and Testing (China) Co., Ltd. Shenzhen Branch Page 13 of 23 Building 12&13, Zhiheng Wisdomland Business Park, Nantou Checkpoint Road 2, Nanshan District, Release 2014-03-20 Shenzhen City, 518052, P. R. China Tel. +86 755 8828 6998, Fax: +86 755 8828 5299

Report Number: 68.930.14.004.01 9.4 Spurious RF conducted emissions Test Method 1. Use the following spectrum analyzer settings: Span = wide enough to capture the peak level of the in-band emission and all spurious emissions (e.g., harmonics) from the lowest frequency generated in the EUT up through the 10th harmonic. Typically, several plots are required to cover this entire span. RBW = 100 kHz, VBW≥RBW, Sweep = auto, Detector function = peak, Trace = max hold 2. Allow the trace to stabilize. Set the marker on the peak of any spurious emission recorded. 3. The level displayed must comply with the limit specified in this Section. Submit these plots. 4. Repeat above procedures until all frequencies measured were complete. Limit Frequency Range Limit (dBc) MHz 30-25000 -20 EMC_SZ_FR_21.00 FCC TÜV SÜD Certification and Testing (China) Co., Ltd. Shenzhen Branch Page 14 of 23 Building 12&13, Zhiheng Wisdomland Business Park, Nantou Checkpoint Road 2, Nanshan District, Release 2014-03-20 Shenzhen City, 518052, P. R. China Tel. +86 755 8828 6998, Fax: +86 755 8828 5299

Report Number: 68.930.14.004.01 Spurious RF conducted emissions 2402MHz EMC_SZ_FR_21.00 FCC TÜV SÜD Certification and Testing (China) Co., Ltd. Shenzhen Branch Page 15 of 23 Building 12&13, Zhiheng Wisdomland Business Park, Nantou Checkpoint Road 2, Nanshan District, Release 2014-03-20 Shenzhen City, 518052, P. R. China Tel. +86 755 8828 6998, Fax: +86 755 8828 5299

Report Number: 68.930.14.004.01 Spurious RF conducted emissions 2440MHz EMC_SZ_FR_21.00 FCC TÜV SÜD Certification and Testing (China) Co., Ltd. Shenzhen Branch Page 16 of 23 Building 12&13, Zhiheng Wisdomland Business Park, Nantou Checkpoint Road 2, Nanshan District, Release 2014-03-20 Shenzhen City, 518052, P. R. China Tel. +86 755 8828 6998, Fax: +86 755 8828 5299

Report Number: 68.930.14.004.01 Spurious RF conducted emissions 2480MHz EMC_SZ_FR_21.00 FCC TÜV SÜD Certification and Testing (China) Co., Ltd. Shenzhen Branch Page 17 of 23 Building 12&13, Zhiheng Wisdomland Business Park, Nantou Checkpoint Road 2, Nanshan District, Release 2014-03-20 Shenzhen City, 518052, P. R. China Tel. +86 755 8828 6998, Fax: +86 755 8828 5299

Report Number: 68.930.14.004.01 9.5 Band edge testing Test Method 1 Use the following spectrum analyzer settings: Span = wide enough to capture the peak level of the in-band emission and all spurious RBW = 100 kHz, VBW≥RBW, Sweep = auto, Detector function = peak, Trace = max hold 2 Allow the trace to stabilize, use the peak and delta measurement to record the result. 3 The level displayed must comply with the limit specified in this Section. . Limit Frequency Range Limit (dBc) MHz 30-25000 -20 EMC_SZ_FR_21.00 FCC TÜV SÜD Certification and Testing (China) Co., Ltd. Shenzhen Branch Page 18 of 23 Building 12&13, Zhiheng Wisdomland Business Park, Nantou Checkpoint Road 2, Nanshan District, Release 2014-03-20 Shenzhen City, 518052, P. R. China Tel. +86 755 8828 6998, Fax: +86 755 8828 5299

Report Number: 68.930.14.004.01 Band edge testing EMC_SZ_FR_21.00 FCC TÜV SÜD Certification and Testing (China) Co., Ltd. Shenzhen Branch Page 19 of 23 Building 12&13, Zhiheng Wisdomland Business Park, Nantou Checkpoint Road 2, Nanshan District, Release 2014-03-20 Shenzhen City, 518052, P. R. China Tel. +86 755 8828 6998, Fax: +86 755 8828 5299

Report Number: 68.930.14.004.01 9.6 Spurious radiated emissions for transmitter Test Method 1. The EUT is placed on a turntable, which is 0.8m above ground plane. 2. EUT is set 3m away from the receiving antenna, which is varied from 1m to 4m to find out the highest emissions. 3. Use the following spectrum analyzer settings: Span = wide enough to fully capture the emission being measured, RBW = 1 MHz for f ≥ 1GHz, 100 kHz for f < 1 GHz, VBW ≥ RBW, Sweep = auto, Detector function = peak, Trace = max hold 4. Follow the guidelines in ANSI C63.4-1992 with respect to maximizing the emission by rotating the EUT, adjusting the measurement antenna height and polarization, etc. The peak reading of the emission, after being corrected by the antenna factor, cable loss, pre-amp gain, etc., is the peak field strength,submit this data. Each emission was to be maximized by changing the polarization of receiving antenna both horizontal and vertical. 5. Set the VBW to 10 Hz, while maintaining all of the other instrument settings. This peak level, once corrected, must comply with the limit specified in Section 15.209. If the duty cycle per channel of the hopping signal is less than 100 ms, then the reading obtained with the 10 Hz VBW may be further adjusted by a “duty cycle correction factor”, derived from 20log(duty cycle/100 ms), in an effort to demonstrate compliance with the 15.209 limit. Submit this data. Limit According to part 15.247(d), the radio emission outside the operating frequency band shall be at least 20 dB below that in the 100 kHz bandwidth within the band that contains the highest level of the desired power. Radiated emissions which fall in the restricted bands, as defined in section15.205, must comply with the radiated emission limits specified in section 15.209. Frequency Field Strength Field Strength Detector MHz uV/m dBμV/m 30-88 100 40 QP 88-216 150 43.5 QP 216-960 200 46 QP 960-1000 500 54 QP Above 1000 500 54 AV Above 1000 5000 74 PK EMC_SZ_FR_21.00 FCC TÜV SÜD Certification and Testing (China) Co., Ltd. Shenzhen Branch Page 20 of 23 Building 12&13, Zhiheng Wisdomland Business Park, Nantou Checkpoint Road 2, Nanshan District, Release 2014-03-20 Shenzhen City, 518052, P. R. China Tel. +86 755 8828 6998, Fax: +86 755 8828 5299

Report Number: 68.930.14.004.01 Spurious radiated emissions for transmitter According to ANSI C63.10, if the peak (or quasi-peak) measured value complies with the average limit, it is unnecessary to perform an average measurement, so AV emission value did not show in below table if the peak value complies with average limit. Transmitting spurious emission test result as below: 2402MHz Test Result Antenna Cable Amp. Emission Frequency Reading Polarization Limit Detector Result Factor Loss Factor Level MHz dB/m dB dB dBuV dBuV/m dBμV/m 30-1000 -- -- -- -- -- Horizontal -- QP Pass 30-1000 -- -- -- -- -- Vertical -- QP Pass *4804 32.85 8.56 35.70 45.34 51.05 Horizontal 74 PK Pass *4804 32.85 8.56 35.70 -- Horizontal 54 AV Pass *4804 32.85 8.56 35.70 44.36 50.07 Vertical 74 PK Pass *4804 32.85 8.56 35.70 -- -- Vertical 54 AV Pass 2440MHz Test Result Antenna Cable Amp. Emission Frequency Reading Polarization Limit Detector Result Factor Loss Factor Level MHz dB/m dB dB dBuV dBuV/m dBμV/m *4880 32.99 8.64 35.70 46.52 52.45 Horizontal 74 PK Pass *4880 32.99 8.64 35.70 -- -- Horizontal 54 AV Pass *4880 32.99 8.64 35.70 43.83 49.76 Vertical 74 PK Pass *4880 32.99 8.64 35.70 -- -- Vertical 74 AV Pass 2480MHz Test Result Antenna Cable Amp. Emission Frequency Reading Polarization Limit Detector Result Factor Loss Factor Level MHz dB/m dB dB dBuV dBuV/m dBμV/m *4960 33.13 8.72 35.70 45.67 51.82 Horizontal 74 PK Pass *4960 33.13 8.72 35.70 -- -- Horizontal 54 AV Pass *4960 33.13 8.72 35.70 44.90 51.05 Vertical 74 PK Pass *4960 33.13 8.72 35.70 -- -- Vertical 54 AV Pass Remark: (1) QP Emission Level= Antenna Factor +Cable Loss + Reading PK Emission Level= Antenna Factor +Cable Loss - Amp. factor + Reading AV Emission Level= PK Emission Level+20log(dutycycle) (2) Data of measurement within this frequency range shown “-” in the table above means the reading of emissions are attenuated more than 20db below the permissible limits or the field strength is too small to be measured. (3) “*” means the emission(s) appear within the restrict bands shall follow the requirement of section 15.205. EMC_SZ_FR_21.00 FCC TÜV SÜD Certification and Testing (China) Co., Ltd. Shenzhen Branch Page 21 of 23 Building 12&13, Zhiheng Wisdomland Business Park, Nantou Checkpoint Road 2, Nanshan District, Release 2014-03-20 Shenzhen City, 518052, P. R. China Tel. +86 755 8828 6998, Fax: +86 755 8828 5299

Report Number: 68.930.14.004.01 10 Test Equipment List List of Test Instruments CAL. DUE DESCRIPTION MANUFACTURER MODEL NO. SERIAL NO. DATE Test Receiver Rohde & Schwarz ESHS10 838693/001 Nov.04, 15 L.I.S.N.#1 Rohde & Schwarz ESH2-Z5 834066/011 Nov.04, 15 L.I.S.N.#3 Kyoritsu KNW-242C 8-1920-1 May.07, 15 RF Cable 3D-2W Fujikura LISN Cable 1# May.07, 15 CE Coaxial Switch MP59B Anritsu M55367 May.07, 15 Passive Probe ESH2-Z3 Rohde & 299.7810.52 May.07, 15 Schwarz Pulse Limiter ESH3-Z2 Rohde & 100341 May.07, 15 Schwarz C Spectrum Agilent E4446A US44300459 May.08, 15 RE Test Receiver Rohde & Schwarz ESVS10 834468/011 May.07, 15 <1 <1GHz GHz Amplifier < 1 GHz HP 8447D 2648A04738 May.07, 15 HF Cable Hubersuhne Sucoflex104 Room 2 May.08, 15 Bilog Antenna Schaffner CBL6111C 2598 Oct.25, 15 RE Spectrum > 1GHz Agilent E4446A US44300459 May.08, 15 >1 GHz Horn Antenna EMCO 3115 9607-4877 Jun. 24, 15 Amp > 1 Ghz HP 8449B 3008A08495 May.08, 15 HF Cable Hubersuhne Sucoflex104 Room1 May.08, 15 C - Conducted RF tests  Conducted peak output power  6dB bandwidth  20dB bandwidth and 99% Occupied Bandwidth  Carrier frequency separation  Number of hopping frequencies  Dwell Time  Power spectral density  Spurious RF conducted emissions  Band edge EMC_SZ_FR_21.00 FCC TÜV SÜD Certification and Testing (China) Co., Ltd. Shenzhen Branch Page 22 of 23 Building 12&13, Zhiheng Wisdomland Business Park, Nantou Checkpoint Road 2, Nanshan District, Release 2014-03-20 Shenzhen City, 518052, P. R. China Tel. +86 755 8828 6998, Fax: +86 755 8828 5299

Report Number: 68.930.14.004.01 11 System Measurement Uncertainty For a 95% confidence level, the measurement expanded uncertainties for defined systems, in accordance with the recommendations of ISO 17025 were: System Measurement Uncertainty Items Extended Uncertainty 4.32dB (30MHz-1GHz) Radiated spurious emission 2.27dB (1GHz -25GHz) Conducted spurious emission 2.10dB(30MHz-25GHz) Bandwidth test 1*10-9 Conducted emission 2.4dB EMC_SZ_FR_21.00 FCC TÜV SÜD Certification and Testing (China) Co., Ltd. Shenzhen Branch Page 23 of 23 Building 12&13, Zhiheng Wisdomland Business Park, Nantou Checkpoint Road 2, Nanshan District, Release 2014-03-20 Shenzhen City, 518052, P. R. China Tel. +86 755 8828 6998, Fax: +86 755 8828 5299


Document Created: 2015-01-20 03:33:14
Document Modified: 2015-01-20 03:33:14
© 2024 FCC.report
This site is not affiliated with or endorsed by the FCC