tst rpt

FCC ID: ONFR2X1

Test Report

Download: PDF
FCCID_1012816

SGS-CSTC Standards Technical Services Co., Ltd. GuangZhou Branch Testing Center 198 Kezhu Road, Scientech Park, Guangzhou Economic & Technology Development District, Guangzhou, China 510663 Telephone: +86 (0) 20 82155555 Fax: +86 (0) 20 82075059 Email: sgs_internet_operations@sgs.com Report No.: GLEMO080702087RFT FEDERAL COMMUNICATIONS COMMISSION Page: 1 of 16 Registration number: 282399 FCC ID: ONFR2X1 TEST REPORT Application No. : GLEMO080702087RF Applicant: Tele Radio AB FCC ID: ONFR2X1 Frequency Band 2405-2480MHz Equipment Under Test (EUT): Name: Transceiver Model No.: R2-1 Serial No.: Not supplied by client Standards: FCC PART 15 SUBPART C: 2007 Please refer to section 2 for further details. Date of Receipt: July 07, 2008 Date of Test: July 25, 2008 Date of Issue: July 29, 2008 Test Result : PASS * In the configuration tested, the EUT complied with the standards specified above. Authorized Signature: Stephen Guo Manager The manufacturer should ensure that all products in series production are in conformity with the product sample detailed in this report. If the product in this report is used in any configuration other than that detailed in the report, the manufacturer must ensure the new system complies with all relevant standards. The report must not be used by the client to claim product certification, approval, or endorsement by NVLAP, NIST, or any agency of the federal government. All test results in this report can be traceable to National or International Standards. This document is issued by the Company under its General Conditions of Service printed overleaf or available on request and accessible at http://www.sgs.com/terms_and_conditions.htm. Attention is drawn to the limitation of liability, indemnification and jurisdiction issues defined therein. Any holder of this document is advised that information contained hereon reflects the Company’s findings at the time of its intervention only and within the limits of Client’s instructions, if any. The Company’s sole responsibility is to its Client and this document does not exonerate parties to a transaction from exercising all their rights and obligations under the transaction documents. Any unauthorized alteration, forgery or falsification of the content or appearance of this document is unlawful and offenders may be prosecuted to the fullest extent of the law.” Unless otherwise stated the results shown in this test report refer only to the sample(s) tested. This document cannot be reproduced except in full, without prior approval of the Company.

SGS-CSTC Standards Technical Services Co., Ltd. GuangZhou Branch Testing Center Report No.: GLEMO080702087RFT Page: 2 of 16 FCC ID: ONFR2X1 2 Test Summary Test Test Requirement Stanadard Paragraph Result Field Strength of FCC PART 15 :2007 Section 15.249 (a) PASS Fundamental Field Strength of Section 15.249 (a) FCC PART 15 :2007 PASS Unwanted Emissions Section 15.249 (d) Occupied Bandwidth FCC PART 15 :2007 Section 15.215 (c) PASS Band Edges FCC PART 15 :2007 Section 15.249 (d) PASS Remark: Tx: In this whole report Tx (or tx) means Transmitter. Rx: In this whole report Rx (or rx) means Receiver. This document is issued by the Company under its General Conditions of Service printed overleaf or available on request and accessible at http://www.sgs.com/terms_and_conditions.htm. Attention is drawn to the limitation of liability, indemnification and jurisdiction issues defined therein. Any holder of this document is advised that information contained hereon reflects the Company’s findings at the time of its intervention only and within the limits of Client’s instructions, if any. The Company’s sole responsibility is to its Client and this document does not exonerate parties to a transaction from exercising all their rights and obligations under the transaction documents. Any unauthorized alteration, forgery or falsification of the content or appearance of this document is unlawful and offenders may be prosecuted to the fullest extent of the law.” Unless otherwise stated the results shown in this test report refer only to the sample(s) tested. This document cannot be reproduced except in full, without prior approval of the Company.

SGS-CSTC Standards Technical Services Co., Ltd. GuangZhou Branch Testing Center Report No.: GLEMO080702087RFT Page: 3 of 16 FCC ID: ONFR2X1 3 Contents Page 1 COVER PAGE ...........................................................................................................................................1 2 TEST SUMMARY .................................................................................................................................................... 2 3 CONTENTS .............................................................................................................................................................. 3 4 GENERAL INFORMATION.................................................................................................................................... 4 4.1 CLIENT INFORMATION ....................................................................................................................................... 4 4.2 GENERAL DESCRIPTION OF E.U.T................................................................................................................... 4 4.3 DESCRIPTION OF EUT OPERATION .................................................................................................................. 4 4.4 STANDARDS APPLICABLE FOR TESTING .......................................................................................................... 4 4.5 TEST LOCATION ................................................................................................................................................ 4 4.6 OTHER INFORMATION REQUESTED BY THE CUSTOMER .................................................................................. 4 4.7 TEST FACILITY .................................................................................................................................................. 5 5 EQUIPMENTS USED DURING TEST.................................................................................................................. 6 6 TEST RESULT......................................................................................................................................................... 7 6.1 E.U.T. OPERATION ........................................................................................................................................... 7 6.2 TEST PROCEDURE & MEASUREMENT DATA .................................................................................................... 8 6.2.1 Field Strength of Fundamental& Field Strength of Unwanted Emissions .......................................... 8 6.2.2 Occupied Bandwidth & Band Edge ....................................................................................................... 12 This document is issued by the Company under its General Conditions of Service printed overleaf or available on request and accessible at http://www.sgs.com/terms_and_conditions.htm. Attention is drawn to the limitation of liability, indemnification and jurisdiction issues defined therein. Any holder of this document is advised that information contained hereon reflects the Company’s findings at the time of its intervention only and within the limits of Client’s instructions, if any. The Company’s sole responsibility is to its Client and this document does not exonerate parties to a transaction from exercising all their rights and obligations under the transaction documents. Any unauthorized alteration, forgery or falsification of the content or appearance of this document is unlawful and offenders may be prosecuted to the fullest extent of the law.” Unless otherwise stated the results shown in this test report refer only to the sample(s) tested. This document cannot be reproduced except in full, without prior approval of the Company.

SGS-CSTC Standards Technical Services Co., Ltd. GuangZhou Branch Testing Center Report No.: GLEMO080702087RFT Page: 4 of 16 FCC ID: ONFR2X1 4 General Information 4.1 Client Information Applicant Name: Tele Radio AB Applicant Address: Datavägen 21, SE-43632 Askim, Sweden 4.2 General Description of E.U.T. Product Name: Transceiver Model: R2-1 Power Supply: DC 5V~24V Power Cord: N/A 4.3 Description of EUT operation Type of Modulation O-QPSK(Offset QPSK), spread spectrum Frequency Band 2405MHz ~ 2480MHz Antenna Type Integrate Antenna 4.4 Standards Applicable for Testing The standard used was FCC PART 15, SUBPART C (2007) section 15.249. 4.5 Test Location All tests were performed at: SGS-CSTC Standards Technical Services Co., Ltd., Guangzhou EMC Laboratory, 198 Kezhu Road, Scientech Park, Guangzhou Economic & Technology Development District, Guangzhou, China 510663 Tel: +86 20 82155555 Fax: +86 20 82075059 No tests were sub-contracted. 4.6 Other Information Requested by the Customer None. This document is issued by the Company under its General Conditions of Service printed overleaf or available on request and accessible at http://www.sgs.com/terms_and_conditions.htm. Attention is drawn to the limitation of liability, indemnification and jurisdiction issues defined therein. Any holder of this document is advised that information contained hereon reflects the Company’s findings at the time of its intervention only and within the limits of Client’s instructions, if any. The Company’s sole responsibility is to its Client and this document does not exonerate parties to a transaction from exercising all their rights and obligations under the transaction documents. Any unauthorized alteration, forgery or falsification of the content or appearance of this document is unlawful and offenders may be prosecuted to the fullest extent of the law.” Unless otherwise stated the results shown in this test report refer only to the sample(s) tested. This document cannot be reproduced except in full, without prior approval of the Company.

SGS-CSTC Standards Technical Services Co., Ltd. GuangZhou Branch Testing Center Report No.: GLEMO080702087RFT Page: 5 of 16 FCC ID: ONFR2X1 4.7 Test Facility The test facility is recognized, certified, or accredited by the following organizations: • NVLAP – Lab Code: 200611-0 SGS-CSTC Standards Technical Services Co., Ltd., Guangzhou EMC Laboratory is recognized under the National Voluntary Laboratory Accreditation Program (NVLAP/NIST). NVLAP Code: 200611-0. • FCC – Registration No.: 282399 SGS-CSTC Standards Technical Services Co., Ltd., EMC Laboratory has been registered and fully described in a report filed with the (FCC) Federal Communications Commission. The acceptance letter from the FCC is maintained in our files. Registration 282399, May 31, 2002. With the above and NVLAP’s accreditation, SGS-CSTC is an authorized test laboratory for the DoC process. This document is issued by the Company under its General Conditions of Service printed overleaf or available on request and accessible at http://www.sgs.com/terms_and_conditions.htm. Attention is drawn to the limitation of liability, indemnification and jurisdiction issues defined therein. Any holder of this document is advised that information contained hereon reflects the Company’s findings at the time of its intervention only and within the limits of Client’s instructions, if any. The Company’s sole responsibility is to its Client and this document does not exonerate parties to a transaction from exercising all their rights and obligations under the transaction documents. Any unauthorized alteration, forgery or falsification of the content or appearance of this document is unlawful and offenders may be prosecuted to the fullest extent of the law.” Unless otherwise stated the results shown in this test report refer only to the sample(s) tested. This document cannot be reproduced except in full, without prior approval of the Company.

SGS-CSTC Standards Technical Services Co., Ltd. GuangZhou Branch Testing Center Report No.: GLEMO080702087RFT Page: 6 of 16 FCC ID: ONFR2X1 5 Equipments Used during Test RE in Chamber Cal. Date Cal.Due date No: Test Equipment Manufacturer Model No. Serial No. (dd-mm-yy) (dd-mm-yy) Compact Semi- ChangZhou EMC0525 Anechoic Chamber N/A N/A N/A N/A ZhongYu EMC0522 EMI Test Receiver Rohde & Schwarz ESIB26 100249 28-01-2008 28-01-2009 N/A EMI Test Software Audix E3 N/A N/A N/A EMC0514 Coaxial cable SGS N/A N/A 04-12-2007 04-12-2008 EMC0524 Bi-log Type Antenna Schaffner -Chase CBL6112B 2966 12-08-2008 12-08-2009 EMC0519 Bilog Type Antenna Schaffner -Chase CBL6143 5070 12-08-2008 12-08-2009 EMC0517 Horn Antenna Rohde & Schwarz HF906 100095 12-08-2008 12-08-2009 EMC0040 Spectrum Analyzer Rohde & Schwarz FSP30 100324 05-12-2007 05-12-2008 0.1-1300 MHz 2944A0625 EMC0520 Pre-Amplifier HP 8447D OPT 010 11-03-2008 11-03-2009 2 1-26.5 GHz 3008A0164 EMC0521 Pre-Amplifier Agilent 8449B 11-03-2008 11-03-2009 9 EMC0075 310N Amplifier Sonama 310N 272683 10-09-2007 10-09-2008 EMC0523 Active Loop Antenna EMCO 6502 00042963 09-08-2008 09-08-2010 10m Semi- Anechoic EMC0530 Chamber ETS N/A N/A 10-08-2008 10-08-2009 Conducted Emission Cal. Date Cal.Due date No: Test Equipment Manufacturer Model No. Serial No. (dd-mm-yy) (dd-mm-yy) 3 EMC0306 Shielding Room Zhong Yu 8 x 3 x 3.8 m N/A N/A N/A EMC0102 LISN Schaffner Chase MNZ050D/1 1421 14-12-2007 14-12-2008 3560.6550. EMC0118 Two-line v-netwok Rohde & Schwarz ENV216 28-07-2008 28-07-2009 02 EMC0506 EMI Test Receiver Rohde & Schwarz ESCS30 100085 14-12-2007 14-12-2008 EMC0107 Coaxial Cable SGS 2m N/A 24-11-2007 26-11-2008 EMC0106 Voltage Probe SGS N/A N/A N/A N/A Fischer Custom FCC-TLISN-T8- EMC0120 8 Line LISN Communications Inc. 02 20550 21-02-2008 21-02-2009 Fischer Custom FCC-TLISN-T4- EMC0121 4 Line LISN Communications Inc. 02 20549 21-02-2008 21-02-2009 Fischer Custom FCC-TLISN-T2- EMC0122 2 Line LISN Communications Inc. 02 20548 21-02-2008 21-02-2009 General used equipment Cal. Date Cal.Due date No: Test Equipment Manufacturer Model No. Serial No. (dd-mm-yy) (dd-mm-yy) EMC0006 DMM Fluke 73 70681569 27-09-2007 27-09-2008 EMC0007 DMM Fluke 73 70671122 27-09-2007 27-09-2008 This document is issued by the Company under its General Conditions of Service printed overleaf or available on request and accessible at http://www.sgs.com/terms_and_conditions.htm. Attention is drawn to the limitation of liability, indemnification and jurisdiction issues defined therein. Any holder of this document is advised that information contained hereon reflects the Company’s findings at the time of its intervention only and within the limits of Client’s instructions, if any. The Company’s sole responsibility is to its Client and this document does not exonerate parties to a transaction from exercising all their rights and obligations under the transaction documents. Any unauthorized alteration, forgery or falsification of the content or appearance of this document is unlawful and offenders may be prosecuted to the fullest extent of the law.” Unless otherwise stated the results shown in this test report refer only to the sample(s) tested. This document cannot be reproduced except in full, without prior approval of the Company.

SGS-CSTC Standards Technical Services Co., Ltd. GuangZhou Branch Testing Center Report No.: GLEMO080702087RFT Page: 7 of 16 FCC ID: ONFR2X1 6 Test Result 6.1 E.U.T. Operation Power supply: Pre-test the EUT supply with DC 5V, DC 12V and DC 24V, the worst case is in DC 24V power supply. Operating Environment: Temperature: 26°C Humidity: 56% RH Atmospheric Pressure: 1005mbar EUT Operation: Test the EUT in continue transmitting mode at the lowest (2405MHz), middle (2440MHz) and the highest (2480MHz) channel. This document is issued by the Company under its General Conditions of Service printed overleaf or available on request and accessible at http://www.sgs.com/terms_and_conditions.htm. Attention is drawn to the limitation of liability, indemnification and jurisdiction issues defined therein. Any holder of this document is advised that information contained hereon reflects the Company’s findings at the time of its intervention only and within the limits of Client’s instructions, if any. The Company’s sole responsibility is to its Client and this document does not exonerate parties to a transaction from exercising all their rights and obligations under the transaction documents. Any unauthorized alteration, forgery or falsification of the content or appearance of this document is unlawful and offenders may be prosecuted to the fullest extent of the law.” Unless otherwise stated the results shown in this test report refer only to the sample(s) tested. This document cannot be reproduced except in full, without prior approval of the Company.

SGS-CSTC Standards Technical Services Co., Ltd. GuangZhou Branch Testing Center Report No.: GLEMO080702087RFT Page: 8 of 16 FCC ID: ONFR2X1 6.2 Test Procedure & Measurement Data 6.2.1 Field Strength of Fundamental& Field Strength of Unwanted Emissions Test Requirement: FCC Part15 C Section 15.249(a) & (d) Test Method: Based on FCC Part15 C Section 15.249 & ANSI C63.4 Test Date: July 25, 2008 Measurement Distance: 3m (Semi-Anechoic Chamber) Frequency range 30 MHz – 25GHz for transmitting mode. Test instrumentation resolution bandwidth 120 kHz (30 MHz - 1000 MHz), 1 MHz (1000 MHz – 25GHz) Operation: Receive antenna scan height 1 - 4 m, polarization Vertical/ Horizontal, a 0 turntable rotate through 360 in the horizontal plane and it is used to support the test sample at 0.8m above the ground plane. Requirements: FCC Part 15.249(a) Fundamental Frequency Field Strength of Fundamental Field Strength of Harmonics (MHz) (dBuV/m @ 3m) (dBuV/m @ 3m) 902 to 928 94.0 54.0 2400 to 2483.5 94.0 54.0 5725 to 5875 94.0 54.0 24000 to 24250 108.0 68.0 FCC Part 15.249(d) Emissions radiated outside of the specified frequency bands, except for harmonics, shall be attenuated by at least 50 dB below the level of the fundamental or to the general radiated emission limits in Section 15.209, whichever is the lesser attenuation. Remark: The fundamental frequency rang of the EUT is 2405MHz ~ 2480MHz. The limit for average field strength dBuv/m for the fundamental frequency = 94.0 dBµV/m. The limit for Peak field strength dBuv/m for the fundamental frequency = 114.0 dBµV/m. No fundamental is allowed in the restricted bands. The limit for average field strength dBµV/m for the harmonics = 54.0 dBµV/m. The limit for peak field strength dBµV/m for the harmonics = 74.0 dBµV/m. Emission radiated outside of the specified frequency bands,except for harmonics,shall be attenuated by at least 50dB below the level of the fundamental or 54.0 dBµV/m in 15.209. Here the limit for the other emission is 54.0 dBµV/m. This document is issued by the Company under its General Conditions of Service printed overleaf or available on request and accessible at http://www.sgs.com/terms_and_conditions.htm. Attention is drawn to the limitation of liability, indemnification and jurisdiction issues defined therein. Any holder of this document is advised that information contained hereon reflects the Company’s findings at the time of its intervention only and within the limits of Client’s instructions, if any. The Company’s sole responsibility is to its Client and this document does not exonerate parties to a transaction from exercising all their rights and obligations under the transaction documents. Any unauthorized alteration, forgery or falsification of the content or appearance of this document is unlawful and offenders may be prosecuted to the fullest extent of the law.” Unless otherwise stated the results shown in this test report refer only to the sample(s) tested. This document cannot be reproduced except in full, without prior approval of the Company.

SGS-CSTC Standards Technical Services Co., Ltd. GuangZhou Branch Testing Center Report No.: GLEMO080702087RFT Page: 9 of 16 FCC ID: ONFR2X1 Test Procedure: The procedure uesd was ANSI Standard C63.4-2003. The receive was scanned from 30MHz to 25GHz.When an emission was found,the table was roated to produce the maximum signal strength. An initial pre-scan was performed for in peak detection mode using the receiver. The EUT was measured for both the Horizontal and Vertical polarities and performed a pre-test three orthogonal planes. For intentional radiators, measurements of the variation of the input power or the radiated signal level of the fundamental frequency component of the emission, as appropriate, shall be performed with the supply voltage varied between 85% and 115% of the nominal rated supply voltage.For battery operated equipment,the equipment tests shall be performed using a new battery.Pretest the equipment on 3 axis, and the worst case emissions were reported. Test Configuration: 30MHz to 1GHz: Above 1GHz: This document is issued by the Company under its General Conditions of Service printed overleaf or available on request and accessible at http://www.sgs.com/terms_and_conditions.htm. Attention is drawn to the limitation of liability, indemnification and jurisdiction issues defined therein. Any holder of this document is advised that information contained hereon reflects the Company’s findings at the time of its intervention only and within the limits of Client’s instructions, if any. The Company’s sole responsibility is to its Client and this document does not exonerate parties to a transaction from exercising all their rights and obligations under the transaction documents. Any unauthorized alteration, forgery or falsification of the content or appearance of this document is unlawful and offenders may be prosecuted to the fullest extent of the law.” Unless otherwise stated the results shown in this test report refer only to the sample(s) tested. This document cannot be reproduced except in full, without prior approval of the Company.

SGS-CSTC Standards Technical Services Co., Ltd. GuangZhou Branch Testing Center Report No.: GLEMO080702087RFT Page: 10 of 16 FCC ID: ONFR2X1 The field strength is calculated by adding the Antenna Factor, Cable Factor & Peramplifier . The basic equation with a sample calculation is as follows: Final Test Level =Receiver Reading + Antenna Factor + Cable Factor – Peramlifer Factor The following test results were performed on the transmitting mode: 1.Test in Channel lowest (2405MHz), keep in continuously transmitting status. (a) Antenna polarization: Horizontal Read Antenna Cable Preamp Over Frequency Level Limit Line Level Factor Loss Factor Limit Remark (MHz) (dBuV/m) (dBuV/m) (dBuV) (dB/m) (dB) (dB) (dB) 2405.0 76.00 28.60 4.60 34.76 74.44 114.00 -39.56 Peak 2405.0 59.38 28.60 4.60 34.76 57.82 94.00 -36.18 Average 4810.0 47.85 33.19 6.90 33.01 54.93 74.00 -19.07 Peak 4810.0 35.81 33.19 6.90 33.01 42.89 54.00 -11.11 Average (b) Antenna polarization: Vertical Read Antenna Cable Preamp Over Frequency Level Limit Line Level Factor Loss Factor Limit Remark (MHz) (dBuV/m) (dBuV/m) (dBuV) (dB/m) (dB) (dB) (dB) 2405.0 75.52 28.60 4.60 34.76 73.96 114.00 -40.04 Peak 2405.0 58.88 28.60 4.60 34.76 57.32 94.00 -36.68 Average 4810.0 43.28 33.19 6.90 33.01 50.36 74.00 -23.64 Peak 4810.0 31.28 33.19 6.90 33.01 38.30 54.00 -15.70 Average 2. Test in Channel middle (2440MHz), keep in continuously transmitting status. (a) Antenna polarization: Horizontal Read Antenna Cable Preamp Over Frequency Level Limit Line Level Factor Loss Factor Limit Remark (MHz) (dBuV/m) (dBuV/m) (dBuV) (dB/m) (dB) (dB) (dB) 2440.000 78.27 28.69 4.60 34.74 76.83 114.00 -37.17 Peak 2440.000 54.07 28.69 4.60 34.74 52.93 94.00 -41.07 Average 4880.000 46.98 33.27 7.20 32.97 54.48 74.00 -19.52 Peak 4880.000 33.98 33.27 7.20 32.97 41.21 54.00 -12.79 Average This document is issued by the Company under its General Conditions of Service printed overleaf or available on request and accessible at http://www.sgs.com/terms_and_conditions.htm. Attention is drawn to the limitation of liability, indemnification and jurisdiction issues defined therein. Any holder of this document is advised that information contained hereon reflects the Company’s findings at the time of its intervention only and within the limits of Client’s instructions, if any. The Company’s sole responsibility is to its Client and this document does not exonerate parties to a transaction from exercising all their rights and obligations under the transaction documents. Any unauthorized alteration, forgery or falsification of the content or appearance of this document is unlawful and offenders may be prosecuted to the fullest extent of the law.” Unless otherwise stated the results shown in this test report refer only to the sample(s) tested. This document cannot be reproduced except in full, without prior approval of the Company.

SGS-CSTC Standards Technical Services Co., Ltd. GuangZhou Branch Testing Center Report No.: GLEMO080702087RFT Page: 11 of 16 FCC ID: ONFR2X1 (b) Antenna polarization: Vertical Read Antenna Cable Preamp Over Frequency Level Limit Line Level Factor Loss Factor Limit Remark (MHz) (dBuV/m) (dBuV/m) (dBuV) (dB/m) (dB) (dB) (dB) 2440.000 75.06 28.69 4.60 34.74 73.62 114.00 -40.38 Peak 2440.000 54.30 28.69 4.60 34.74 52.40 94.00 -41.60 Average 4880.000 44.53 33.27 7.20 32.97 51.84 75.00 -23.16 Peak 4880.000 33.23 33.27 7.20 32.97 40.73 54.00 -13.27 Average 3.Test in Channel highest (2480MHz), keep in continuously transmitting status. (a) Antenna polarization: Horizontal Read Antenna Cable Preamp Over Frequency Level Limit Line Level Factor Loss Factor Limit Remark (MHz) (dBuV/m) (dBuV/m) (dBuV) (dB/m) (dB) (dB) (dB) 2480.0 78.16 28.78 4.67 34.72 76.90 114.00 -37.10 Peak 2480.0 56.21 28.78 4.67 34.72 54.94 94.00 -39.06 Average 4960.0 49.16 33.36 7.33 32.92 56.93 74.00 -17.07 Peak 4960.0 36.66 33.36 7.33 32.92 44.15 54.00 -9.85 Average (b) Antenna polarization: Vertical Read Antenna Cable Preamp Over Frequency Level Limit Line Level Factor Loss Factor Limit Remark (MHz) (dBuV/m) (dBuV/m) (dBuV) (dB/m) (dB) (dB) (dB) 2480.0 77.15 28.78 4.67 34.72 75.88 114.00 -38.12 Peak 2480.0 56.07 28.78 4.67 34.72 54.80 94.00 -39.20 Average 4960.0 46.69 33.36 7.33 32.92 54.46 74.00 -19.54 Peak 4960.0 36.19 33.36 7.33 32.92 43.96 54.00 -10.04 Average Remark: 1). According to 15.249 (e) As shown in Section 15.35(b), for frequencies above 1000 MHz, the above field strength limits are based on average limits. However, the peak field strength of any emission shall not exceed the maximum permitted average limits specified above by more than 20 dB under any condition of modulation. 2）Sweep from 30MHz to 25GHz, find the max radiated emissions and record it, when the emissions are too weak to be detected, it will not be reported. TEST RESULTS: The unit does meet the FCC requirements. This document is issued by the Company under its General Conditions of Service printed overleaf or available on request and accessible at http://www.sgs.com/terms_and_conditions.htm. Attention is drawn to the limitation of liability, indemnification and jurisdiction issues defined therein. Any holder of this document is advised that information contained hereon reflects the Company’s findings at the time of its intervention only and within the limits of Client’s instructions, if any. The Company’s sole responsibility is to its Client and this document does not exonerate parties to a transaction from exercising all their rights and obligations under the transaction documents. Any unauthorized alteration, forgery or falsification of the content or appearance of this document is unlawful and offenders may be prosecuted to the fullest extent of the law.” Unless otherwise stated the results shown in this test report refer only to the sample(s) tested. This document cannot be reproduced except in full, without prior approval of the Company.

SGS-CSTC Standards Technical Services Co., Ltd. GuangZhou Branch Testing Center Report No.: GLEMO080702087RFT Page: 12 of 16 FCC ID: ONFR2X1 6.2.2 Occupied Bandwidth & Band Edge Test Requirement: FCC Part 15 C Section 15.215 & 15.249 Test Method: ANSI C63.4 and FCC Part 2.1049 Operation within the band 2400-2483.5MHz Test Date: July 25, 2008 Requirements: 15.215(c) Intentional radiators operating under the alternative provisions to the general emission limits,as contained in §§ 15.217 through 15.257 and in Subpart E of this part, must be designed to ensure that, the 20 dB bandwidth of the emission, or whatever bandwidth may otherwise be specified in the specific rule section under which the equipment operates, is contained within the frequency band designated in the rule section under which the equipment is operated. 15.249 (d) Emissions radiated outside of the specified frequency bands, except for harmonics, shall be attenuated by at least 50 dB below the level of the fundamental or to the general radiated emission limits in Section 15.209, whichever is the lesser attenuation. Method of A small sample of the transmitter output was fed into the Spectrum measurement: Analyzer and the attached plot was taken. This document is issued by the Company under its General Conditions of Service printed overleaf or available on request and accessible at http://www.sgs.com/terms_and_conditions.htm. Attention is drawn to the limitation of liability, indemnification and jurisdiction issues defined therein. Any holder of this document is advised that information contained hereon reflects the Company’s findings at the time of its intervention only and within the limits of Client’s instructions, if any. The Company’s sole responsibility is to its Client and this document does not exonerate parties to a transaction from exercising all their rights and obligations under the transaction documents. Any unauthorized alteration, forgery or falsification of the content or appearance of this document is unlawful and offenders may be prosecuted to the fullest extent of the law.” Unless otherwise stated the results shown in this test report refer only to the sample(s) tested. This document cannot be reproduced except in full, without prior approval of the Company.

SGS-CSTC Standards Technical Services Co., Ltd. GuangZhou Branch Testing Center Report No.: GLEMO080702087RFT Page: 13 of 16 FCC ID: ONFR2X1 The occupied bandwidth as below: Lowest Channel:2405MHz: Marker 2 [T1] RBW 100 kHz RF Att 0 dB Ref Lvl -58.73 dBm VBW 100 kHz -10 dBm 2.40369940 GHz SWT 6.5 ms Unit dBm -10 A -20 -30 1 D1 -36.39 dBm -40 1VIEW 1MA -50 D2 -56.39 dBm 2 -60 -70 -80 -90 -100 -110 Center 2.399 GHz 2.5 MHz/ Span 25 MHz The lower frequency is: 2.40369940GHz. This document is issued by the Company under its General Conditions of Service printed overleaf or available on request and accessible at http://www.sgs.com/terms_and_conditions.htm. Attention is drawn to the limitation of liability, indemnification and jurisdiction issues defined therein. Any holder of this document is advised that information contained hereon reflects the Company’s findings at the time of its intervention only and within the limits of Client’s instructions, if any. The Company’s sole responsibility is to its Client and this document does not exonerate parties to a transaction from exercising all their rights and obligations under the transaction documents. Any unauthorized alteration, forgery or falsification of the content or appearance of this document is unlawful and offenders may be prosecuted to the fullest extent of the law.” Unless otherwise stated the results shown in this test report refer only to the sample(s) tested. This document cannot be reproduced except in full, without prior approval of the Company.

SGS-CSTC Standards Technical Services Co., Ltd. GuangZhou Branch Testing Center Report No.: GLEMO080702087RFT Page: 14 of 16 FCC ID: ONFR2X1 Highest Channel 2480MHz: Marker 2 [T1] RBW 100 kHz RF Att 0 dB Ref Lvl -55.01 dBm VBW 100 kHz -10 dBm 2.48194489 GHz SWT 12.5 ms Unit dBm -10 A -20 -30 1 D1 -33.01 dBm -40 1MAX 1MA -50 D2 -53.01 dBm 2 -60 -70 -80 -90 -100 -110 Center 2.4845 GHz 5 MHz/ Span 50 MHz The higher frequency is: 2.48194489GHz. This document is issued by the Company under its General Conditions of Service printed overleaf or available on request and accessible at http://www.sgs.com/terms_and_conditions.htm. Attention is drawn to the limitation of liability, indemnification and jurisdiction issues defined therein. Any holder of this document is advised that information contained hereon reflects the Company’s findings at the time of its intervention only and within the limits of Client’s instructions, if any. The Company’s sole responsibility is to its Client and this document does not exonerate parties to a transaction from exercising all their rights and obligations under the transaction documents. Any unauthorized alteration, forgery or falsification of the content or appearance of this document is unlawful and offenders may be prosecuted to the fullest extent of the law.” Unless otherwise stated the results shown in this test report refer only to the sample(s) tested. This document cannot be reproduced except in full, without prior approval of the Company.

SGS-CSTC Standards Technical Services Co., Ltd. GuangZhou Branch Testing Center Report No.: GLEMO080702087RFT Page: 15 of 16 FCC ID: ONFR2X1 The Band Edge Emission as below: Lowest Band Edage 2400MHz Detector mode:Peak Delta 1 [T1] RBW 100 kHz RF Att 10 dB Ref Lvl -39.13 dB VBW 300 kHz -10 dBm -5.13026052 MHz SWT 10 ms Unit dBm -10 A -20 1 -30 -40 1MAX 1MA -50 -60 1 -70 -80 -90 -100 -110 Center 2.4 GHz 4 MHz/ Span 40 MHz For 2400MHz bandedge checked with 2405MHz frequency operated, the delta shown at the plots are 39.13dB for peak detector mode. The fundamental emission at the frequency of 2405MHz is 74.44dBuV/m for peak detector mode, so the badge emission at 2400MHz is 35.31dBuV/m for peak detector mode. This document is issued by the Company under its General Conditions of Service printed overleaf or available on request and accessible at http://www.sgs.com/terms_and_conditions.htm. Attention is drawn to the limitation of liability, indemnification and jurisdiction issues defined therein. Any holder of this document is advised that information contained hereon reflects the Company’s findings at the time of its intervention only and within the limits of Client’s instructions, if any. The Company’s sole responsibility is to its Client and this document does not exonerate parties to a transaction from exercising all their rights and obligations under the transaction documents. Any unauthorized alteration, forgery or falsification of the content or appearance of this document is unlawful and offenders may be prosecuted to the fullest extent of the law.” Unless otherwise stated the results shown in this test report refer only to the sample(s) tested. This document cannot be reproduced except in full, without prior approval of the Company.

SGS-CSTC Standards Technical Services Co., Ltd. GuangZhou Branch Testing Center Report No.: GLEMO080702087RFT Page: 16 of 16 FCC ID: ONFR2X1 Highest Band Edge 2483.5MHz Detector mode:Peak Delta 1 [T1] RBW 100 kHz RF Att 10 dB Ref Lvl -35.09 dB VBW 300 kHz -10 dBm 3.71129760 MHz SWT 10 ms Unit dBm -10 A -20 1 -30 -40 1MAX 1MA -50 -60 1 -70 -80 -90 -100 -110 Center 2.4835 GHz 4 MHz/ Span 40 MHz For 2483.5MHz bandedge checked with 2480MHz frequency operated, the delta shown at the plots are 35.09dB for peak detector mode. The fundamental emission at the frequency of 2480MHz is 76.90dBuV/m for peak detector mode, so the badge emission at 2483.5MHz is 41.81dBuV/m for peak detector mode. The test result for the Emissions radiated outside of the specified frequency bands , please refer to the section 6.2.1 of this report. The results: The unit does meet the FCC requirements. --End of the Report-- This document is issued by the Company under its General Conditions of Service printed overleaf or available on request and accessible at http://www.sgs.com/terms_and_conditions.htm. Attention is drawn to the limitation of liability, indemnification and jurisdiction issues defined therein. Any holder of this document is advised that information contained hereon reflects the Company’s findings at the time of its intervention only and within the limits of Client’s instructions, if any. The Company’s sole responsibility is to its Client and this document does not exonerate parties to a transaction from exercising all their rights and obligations under the transaction documents. Any unauthorized alteration, forgery or falsification of the content or appearance of this document is unlawful and offenders may be prosecuted to the fullest extent of the law.” Unless otherwise stated the results shown in this test report refer only to the sample(s) tested. This document cannot be reproduced except in full, without prior approval of the Company.


Document Created: 2008-10-07 14:39:17
Document Modified: 2008-10-07 14:39:17
© 2024 FCC.report
This site is not affiliated with or endorsed by the FCC