Users Manual

FCC ID: OEOTLSR8232DK32D

Users Manual

Download: PDF
FCCID_4221857

r Application Note： me Telink TLSR8232DK32 User to Guide s AN-17121200-E2 cu Ver 1.1.0 2018/1/26 TELINK SEMICONDUCTOR r Brief： fo This document is the user guide for Telink TLSR8232DK32 board. nk li Te

Telink TLSR8232DK32 User Guide Published by Telink Semiconductor Bldg 3, 1500 Zuchongzhi Rd, Zhangjiang Hi-Tech Park, Shanghai, China r © Telink Semiconductor All Right Reserved me Legal Disclaimer to Telink Semiconductor reserves the right to make changes without further notice to any products herein to improve reliability, function or design. Telink Semiconductor disclaims any and all liability for any errors, inaccuracies or incompleteness contained s herein or in any other disclosure relating to any product. cu Telink Semiconductor does not assume any liability arising out of the application or use of any product or circuit described herein; neither does it convey any license under its patent rights, nor the rights of others r The products shown herein are not designed for use in medical, life-saving, or life- fo sustaining applications. Customers using or selling Telink Semiconductor products not expressly indicated for use in such applications do so entirely at their own risk and agree to fully indemnify Telink Semiconductor for any damages arising or resulting from such use or sale. nk Information: li For further information on the technology, product and business term, please contact Telink Semiconductor Company (www.telink-semi.com). For sales or technical support, please send email to the address of: Te telinkcnsales@telink-semi.com telinkcnsupport@telink-semi.com AN-17121200-E2 1 Ver 1.1.0

Telink TLSR8232DK32 User Guide Revision History Version Major Changes Date Author 1.0.0 Initial release 2017/12 T.J.B., Cynthia 1.1.0 Updated to C1T125A30_V1.1. 2018/1 T.J.B., Cynthia r me s to cu r fo nk li Te AN-17121200-E2 2 Ver 1.1.0

Telink TLSR8232DK32 User Guide Table of contents 1 Brief......................................................................................................................... 4 1.1 Function ........................................................................................................... 4 2 Pin Description........................................................................................................ 7 3 Pin Connection Guide ........................................................................................... 10 r 3.1 Supply power for TLSR8232DK32 .................................................................. 10 me 3.2 Download Firmware into TLSR8232DK32 ...................................................... 11 3.3 Measure power-saving mode current for TLSR8232DK32 ............................ 12 3.4 Test RF signal for TLSR8232DK32 ................................................................... 13 to 3.5 Test GPIOs for TLSR8232DK32 ....................................................................... 14 3.6 Arduino interface ........................................................................................... 14 4 Appendix ............................................................................................................... 15 s cu Table of figures Figure 1 TLSR8232DK32 silkscreen ...................................................................... 5 r Figure 2 TLSR8232DK32 photo ............................................................................ 6 Figure 3 Connection chart to supply power ...................................................... 10 fo Figure 4 Connection chart to download FW ..................................................... 11 Figure 5 Connection chart to test sleep current ............................................... 12 Figure 6 Connection chart to test RF signal....................................................... 13 Figure 7 Schematic of TLSR8232DK32 ............................................................... 16 nk Table of tables li Table 1 TLSR8232DK32 pin description.............................................................. 7 Te AN-17121200-E2 3 Ver 1.1.0

Telink TLSR8232DK32 User Guide 1 Brief This document presents guide on how to use Telink TLSR8232DK32 board, and applies to all engineers who want to develop TLSR8232-based applications. 1.1 Function r Telink TLSR8232DK32 board can be used for SDK development. Firmware can be me directly downloaded to the TLSR8232DK32 board to be up and running. s to cu r fo nk li Te Top view AN-17121200-E2 4 Ver 1.1.0

Telink TLSR8232DK32 User Guide r me s to cu r fo Bottom view Figure 1 TLSR8232DK32 silkscreen nk li Te AN-17121200-E2 5 Ver 1.1.0

Telink TLSR8232DK32 User Guide J29 1 10 1 8 J31 J20 1 10 1 8 J22 J35 1 3 J36 J33 3 1 J34 2 r 1 3 1 1 3 me J4 J10 s to 6 1 8 2 J12 1 1 2 1 cu 2 J13 J15 1 5 J38 J18 J19 2 J5 1 8 6 1 7 9 r J39 4 1 5 1 1 4 6 1 fo J37 J3 J32 J21 Figure 2 TLSR8232DK32 photo For schematic of TLSR8232DK32 board, please refer to Appendix or the PDF nk document “C1T125A30_V1.1”. li Te AN-17121200-E2 6 Ver 1.1.0

Telink TLSR8232DK32 User Guide 2 Pin Description Table 1 TLSR8232DK32 pin description J3 1 NC 2 VBUS 3 DVDDIO r 4 TL_SWS 5 GND me J4 RF Connector J5 to Connected to VBUS J10 1 PB6 s 2 PB7 J12 & J13 cu Connected to 3V3 J15 mini USB interface (Power supply and debug) 1 VBUS 2 NC r 3 TL_SWS 4~9 GND fo J18 Arduino interface 1 ADC0/PB2 2 ADC1/PB1 3 ADC2/PB0 4 ADC3/PA7 nk 5 ADC4/PA6 6 ADC5/PA5 J19 Arduino interface li 1 NC 2 5V 3 RESET Te 4 3V3 5 5V 6 GND 7 GND 8 NC J20 Arduino interface 1 SCL_PA3 2 SDA_PA4 AN-17121200-E2 7 Ver 1.1.0

Telink TLSR8232DK32 User Guide 3 NC 4 GND 5 SCK_PC5 6 MISO_PC4 (As Master) / MISO_PC3 (As Slave) 7 MOSI_PC3 (As Master) / MOSI_PC4 (As Slave) 8 SS_PC2 9 PC6 10 PC1 r J21 1 PB2 me 2 PB1 3 PB0 4 PA7 to 5 PA6 6 PA5 J22 Arduino interface s 1 PA0 2 3 PA1 PA2 cu 4 PB3 5 NC 6 NC r 7 URX_PB5 (As Master) / URX_PB4 (As Slave) 8 UTX_PB4 (As Master) / UTX_PB5 (As Slave) fo J29 1 PA3 2 PA4 3 NC nk 4 GND 5 PC5 6 PC4 7 PC3 li 8 PC2 9 PC6 10 PC1 Te J31 1 PA0 2 PA1 3 PA2 4 PB3 5 NC 6 NC AN-17121200-E2 8 Ver 1.1.0

Telink TLSR8232DK32 User Guide 7 PB4 8 PB5 J32 1 3V3 2 5V 3 GND 4 GND J33 r UTX Jumper J34 me URX Jumper J35 SPI_MOSI Jumper to J36 SPI_MISO Jumper J37 s 1 100kohm external pull-up resistor 2 3 cu 10kohm external pull-down resistor 1Mohm external pull-down resistor 4 50kohm external pull-down resistor J38 1 3V3 r 2 GND J39 fo GND nk li Te AN-17121200-E2 9 Ver 1.1.0

Telink TLSR8232DK32 User Guide 3 Pin Connection Guide 3.1 Supply power for TLSR8232DK32 Three connection methods are supported to supply power for Telink TLSR8232DK32 board. 1. Method 1: r Make sure a jumper cap is connected on J12 of TLSR8232DK32. me Then connect J15 (miniUSB interface) with PC USB via an USB cable. 2. Method 2: Connect PIN3 and PIN5 of J3 with 3.3V and GND, respectively. to 3. Method 3: Connect PIN1 and PIN2 of J38 with 3.3V and GND, respectively. s cu r fo Option1: 1) Connect J12 with Jumper Cap; nk 2) Connect J15 with PC USB via USB cable. li Optional 3: J12 1 2 1) Connect J38 PIN1 with 3.3V J15 2) Connect J38 PIN2 with GND J38 Te 5 3 1 Optional 2: J3 2) Connect J3 PIN5 with GND 1) Connect J3 PIN3 with 3.3V Figure 3 Connection chart to supply power AN-17121200-E2 10 Ver 1.1.0

Telink TLSR8232DK32 User Guide 3.2 Download Firmware into TLSR8232DK32 Two connection methods are supported to download firmware into Telink TLSR8232DK32 board. 1. Method 1: Connect via USB Make sure a jumper cap is connected on J12 of TLSR8232DK32. r Connect J15 (miniUSB interface) with the USB interface of a burning key (i.e. me burning EVK board) via an USB cable. The miniUSB interface of the burning key is connected with PC USB via an USB cable. to 2. Method 2: Connect via Swire Connect PIN3, PIN4 and PIN5 of J3 with 3.3V, SWM and GND of a burning key, respectively. s cu r fo nk Option1: 1) Connect J12 with Jumper Cap; 2) Connect J15 with burning key via USB cable. li Option2: Connect J3 with burning key 1) Connect PIN3 with 3.3V Te J12 2) Connect PIN4 with SWM 3) Connect PIN5 with GND J15 5 4 3 1 J3 Figure 4 Connection chart to download FW AN-17121200-E2 11 Ver 1.1.0

Telink TLSR8232DK32 User Guide 3.3 Measure power-saving mode current for TLSR8232DK32 To measure current consumption of Telink TLSR8232DK32 board in deep sleep or suspend mode, please follow the connection steps below: 1) Remove jumper caps from J12 and J13 of TLSR8232DK32. 2) Connect anode (+) and cathode (-) of an amperemeter with anode (+) of 3.3V r power supply and PIN2 of J12, respectively. me 3) Connect cathode (-) of the 3.3V power supply with PIN5 of J3. s to cu r Remove jumper cap from J12 fo Remove jumper cap from J13 J12 2 1 nk J13 Connect J12 PIN2 with Amperemeter - li 5 J3 Connect J3 PIN5 with 3.3V power supply - Te Figure 5 Connection chart to test sleep current AN-17121200-E2 12 Ver 1.1.0

Telink TLSR8232DK32 User Guide 3.4 Test RF signal for TLSR8232DK32 To test RF signal for Telink TLSR8232DK32 board, the J4 should be connected with a spectrum analyzer via a RF cable (supplied by Telink). Connect J4 Connect spectrum analyzer r me s to cu J4 r fo nk li Te Figure 6 Connection chart to test RF signal AN-17121200-E2 13 Ver 1.1.0

Telink TLSR8232DK32 User Guide 3.5 Test GPIOs for TLSR8232DK32 Since all GPIOs of Telink TLSR8232DK32 board are already connected to corresponding pins of headers including J3, J10 (if PB6 and PB7 are not used as external 32kHz crystal output and input), J21, J29 and J31 (please refer to Table 1 or the schematic), user can directly test GPIO signals on header pins. r me 3.6 Arduino interface Telink TLSR8232DK32 board is compatible with Arduino standard interface, to which adopts single-column direct-in female headers (J18, J19, J20, J22) with pin distance of 2.54mm. The TLSR8232DK32 can be used for development in the s following two cases: cu 1) By default, the TLSR8232DK32 acts as Host control board by connecting it with Arduino shield daughter board. In this case, it’s needed to connect four jumper caps with PIN1 and PIN2 of J33, PIN1 and PIN2 of J34, PIN1 and PIN2 of J35, as well as PIN1 and PIN2 of J36. r 2) The TLSR8232DK32 can also act as Arduino shield daughter board in fo combination with Arduino Host control board. In this case, it’s needed to connect four jumper caps with PIN2 and PIN3 of J33, PIN2 and PIN3 of J34, PIN2 and PIN3 of J35, as well as PIN2 and PIN3 of J36. nk FCC statement: This device complies with Part 15 of the FCC rules. Operation is subject to the following two conditions: 1) this device may not cause harmful interference, and 2) this device must accept any interference received, li including interference that may cause undesired operation. Changes or modifications not expressly approved by the party responsible for compliance could void your authority to operate the equipment. Te AN-17121200-E2 14 Ver 1.1.0


Document Created: 2019-04-01 11:30:15
Document Modified: 2019-04-01 11:30:15
© 2025 FCC.report
This site is not affiliated with or endorsed by the FCC