User Manual

FCC ID: NKRA18QA

Users Manual

Download: PDF
FCCID_3893925

UMC-A18QA Product Specification UMC-A18QA LGA-type LTE Module User Manual Wistron NeWeb Corp. 啟碁科技股份有限公司 Revision History Version Change history Date 0.1 Preliminary release 2018/06/01 CONFIDENTIAL THIS DOCUMENT CONTAINS PROPRIETARY TECHNICAL INFORMATION, WHICH IS THE PROPERTY OF THE WISTRON NEWEB CORPORATION AND SHALL NOT BE DISCLOSED TO OTHERS IN WHOLE OR IN PART, REPRODUCED, COPIED, OR USED AS THE BASIS FOR DESIGN, MANUFACTURING, OR SALE OF APPARATUS WITHOUT WRITTEN PERMISSION OF WISTRON NEWEB CORPORATION. Page 1

UMC-A18QA Product Specification CONTENTS A. Product Description ......................................................................................... 3 B. Main Features ................................................................................................. 6 B.1 Application interface features ......................................................................................... 7 B.2 Packet mode features ..................................................................................................... 7 B.3 LTE features ..................................................................................................................... 7 B.4 Short Message Service (SMS) features ............................................................................ 7 B.5 RF Specification ............................................................................................................... 8 E. Mounting considerations ................................................................................. 9 F. Mechanic Specifications ................................................................................. 10 G. Package Specifications ................................................................................... 12 H. Label Form.................................................................................................... 12 I. Electrostatic discharge (ESD) ........................................................................... 13 Page 2

UMC-A18QA Product Specification A. PRODUCT DESCRIPTION © Wistron NeWeb Corporation THIS DOCUMENT AND THE INFORMATION CONTAINED HEREIN IS PROPRIETARY AND IS THE EXCLUSIVE PROPERTY OF WNC AND SHALL NOT BE DISTRIBUTED, REPRODUCED, OR DISCLOSED IN WHOLE OR IN PART WITHOUT PRIOR WRITTEN PERMISSION FROM WNC. LIMITATION OF LIABILITY THIS DOCUMENT AND THE INFORMATION CONTAINED HEREIN IS PURELY FOR DESIGN REFERENCE AND SUBJECT TO REVISION BY WNC AT ANY TIME. NOTHING IN THIS DOCUMENT SHALL BE CONSTRUED AS GRANTING ANY WARRANTY OR RIGHT TO USE THE MATERIAL CONTAINED HEREIN WITHOUT WNC’S PRIOR EXPRESS WRITTEN CONSENT. WNC SHALL NOT BE LIABLE FOR ANY USE, APPLICATION OR DEVELOPMENT DERIVED FROM THE MATERIAL WITHOUT SUCH PRIOR EXPRESS WRITTEN CONSENT. FCC Regulations: This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) This device must accept any interference received, including interference that may cause undesired operation. This device has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiated radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: -Reorient or relocate the receiving antenna. -Increase the separation between the equipment and receiver. Page 3

UMC-A18QA Product Specification -Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. -Consult the dealer or an experienced radio/TV technician for help. Caution: Changes or modifications not expressly approved by the party responsible for compliance could void the user‘s authority to operate the equipment. End Product Labeling The final end product must be labeled in a visible area with the following: “Contains FCC ID: NKRA18QA”. The grantee's FCC ID can be used only when all FCC compliance requirements are met. RF Exposure Information This device is intended only for ODM/OEM integrators under the following conditions: (1) The antenna must be installed such that 20cm is maintained between the antenna and users, (2) The transmitter module may not be co-located with any other transmitter or antenna. (3) To comply with FCC regulations limiting both maximum RF output power and human exposure to RF radiation, the maximum antenna gain including cable loss in a mobile exposure condition must not exceed: Standalone Condition: 1.0 dBi in 700 MHz Band 1.5 dBi in 850 MHz Band 5.5 dBi in 1700 MHz Band 3.5 dBi in 1900 MHz Band IMPORTANT NOTE: This module is intended for ODM/OEM integrator. The integrator is still responsible for the FCC compliance requirement of the end product, which integrates this module. 20cm minimum distance has to be able to be maintained between the antenna and the users for the host this module is integrated into. Under such configuration, the FCC radiation exposure limits set forth for an population/uncontrolled environment can be satisfied. Any changes or modifications not expressly approved by the manufacturer could void the user's authority to operate this equipment. Page 4

UMC-A18QA Product Specification USERS MANUAL OF THE END PRODUCT: In the users manual of the end product, the end user has to be informed to keep at least 20cm separation with the antenna while this end product is installed and operated. The end user has to be informed that the FCC radio-frequency exposure guidelines for an uncontrolled environment can be satisfied. The end user has to also be informed that any changes or modifications not expressly approved by the manufacturer could void the user's authority to operate this equipment. If the size of the end product is smaller than 8x10cm, then additional FCC part 15.19 statement is required to be available in the users manual: This device complies with Part 15 of FCC rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference and (2) this device must accept any interference received, including interference that may cause undesired operation. Figure1: UMC-A18QA LGA-type LTE Module A.1 General Descriptions This document describes the specifications of UMC-A18QA LGA LTE Module. This module is based on Qualcomm MDM9207-0 platform and capable to allow users enjoying high speed internet access anywhere and anytime over 4G LTE broadband network. With integrating UMC-A18QA module, the end products are enhanced in both functionality and usability based on leading edge mobile wireless technology. Page 5

UMC-A18QA Product Specification This document will introduce hardware, software, mechanical and environmental specifications in following sections. Product information: Part Number Category LTE GNSS Footprint Dimension UMC-A18QA CAT4 B2, B4, B5, B13 GPS LGA 263 pads 28.5x23.5x2.3mm A.2 Applicable Device WNC UMC-A18QA module is a high speed LTE modem with LGA form factor and is focusing on the gateway, notebook, tablet and other portable device or M2M marketing.  Notebook  Tablet  Mobile Internet Device  Wireless Router  Wireless Multimedia Device  Wireless M2M solution B. MAIN FEATURES  Support 1.8/3.0V USIM  Operation System (OS) Support - Linux (device driver)  Certification  GCF/Verizon (in plan)  FCC (in plan)  Operating Ambient Temperature Page 6

UMC-A18QA Product Specification  Operating : -30°C ~ +70°C  -20°C~+60°C: full functions compliant with 3GPP  -30°C~+70°C: functional workable  Storage : -40°C ~ +85°C B.1 APPLICATION INTERFACE FEATURES  WNC MAL (Modem Abstraction Layer) Manager SDK for Linux B.2 PACKET MODE FEATURES  LTE data rates with category 4 (UMC-A18QA)  75 Mbps DL with 15 MHz bandwidth  37 Mbps UL with 15 MHz bandwidth B.3 LTE FEATURES  3GPP LTE Release 9  Bandwidth support 1.4 MHz, 3 MHz, 5 MHz, 10 MHz, 15 MHz per 3GPP standard  VoLTE  IPv4 and IPv6 supported  LTE Rel-10 MDT with location information B.4 SHORT MESSAGE SERVICE (SMS) FEATURES  SMS over SGs  SMS over IMS Page 7

UMC-A18QA Product Specification B.5 RF SPECIFICATION  Cellular Frequency Band E-UTRA Uplink Frequency Downlink Frequency Operating Band UE Transmit UE Receive Band 2 1850MHz - 1910 MHz 1930 MHz – 1990 MHz Band 4 1710 MHz - 1755 MHz 2110 MHz - 2155 MHz Band 5 824 MHz - 849 MHz 869 MHz - 894 MHz Band 13 777 MHz - 787 MHz 746 MHz - 756 MHz  LTE Channel Bandwidth Channel Bandwidth (CHBW) E-UTRA Operating Band 1.4 MHz 3 MHz 5 MHz 10 MHz 15 MHz 20 MHz Band 2 Yes Yes Yes Yes Yes1 Yes1 Band 4 Yes Yes Yes Yes Yes Yes Band 5 Yes Yes Yes Yes1 Band 13 Yes1 Yes1 Note 1: refers to the CHBW for which a relaxation of the specified UE receiver sensitivity requirement is allowed as defined in section 7.3 of 3GPP TS 36.101.  LTE Max. TX Output Power Parameter LTE Band Items Unit Min Typ Max Partial RB Page 8

UMC-A18QA Product Specification B2, B4, B5,B13 Max TX Power QPSK-1RB#0, 10MHz dBm 20.3 25.7 Note: The RF Transmit Specification is defined at the LGA pad.  LTE Reference Sensitivity LTE Band Items Parameter Min Typ Max Unit Band 2 Receive Sensitivity 10MHz -95.0 dBm Band 4 Receive Sensitivity 10MHz -97.0 dBm Band 5 Receive Sensitivity 10MHz -95.0 dBm Band 13 Receive Sensitivity 10MHz -94.0 dBm Note: The RF Receive Specification is defined at the LGA pad.  GPS Receive Specifications The GPS is an optional feature in UMC-A18QA, depending on additional request. E. MOUNTING CONSIDERATIONS  Reflow soldering profile: Page 9

UMC-A18QA Product Specification Profile Min. Max. Unit Preheat time from140°C to 190°C 70 105 S Time maintained above 230°C 40 60 S Peak package body temperature 230 250 °C Time maintained above 217°C 60 90 S F. MECHANIC SPECIFICATIONS  Dimension: 28.5mm [L] x 23.5mm [W] x 2.3mm [H] Page 10

UMC-A18QA Product Specification PCB FOOTPRINT (Top View) Page 11

UMC-A18QA Product Specification Module Dimension (Top and Side View) G. PACKAGE SPECIFICATIONS  Tape & Reel H. LABEL FORM  Dimension : 19mm * 19mm (example as shown below) Page 12

UMC-A18QA Product Specification I. ELECTROSTATIC DISCHARGE (ESD) +/- 2KV S 20 Park Avenue II, Hsinchu Science Park, Hsinchu 308, Taiwan, R.O.C. TEL: 886-3-666-7799 FAX: 886-3-666-7321 Website: http://www.wnc.com.tw Page 13


Document Created: 2018-06-20 09:31:01
Document Modified: 2018-06-20 09:31:01
© 2024 FCC.report
This site is not affiliated with or endorsed by the FCC