RF Exposure Info

FCC ID: NF3-FR5CPCCF

RF Exposure Info

Download: PDF
FCCID_4401621

                                                                                                                          D-PL-12076-01-03


      BNetzA-CAB-02/21-102




                             Maximum Permissible Exposure (MPE) &
                                                  Exposure evaluation


                     Report identification number: 1-7548/18-01-08 MPE (FCC_IC)

                                     Certification numbers and labeling requirements
 FCC ID                                                                     NF3-FR5CPCCF
 IC number                                                                  3887A-FR5CPCCF
 HVIN (Hardware Version Identification Number)                              FR5CPCCF
 PMN (Product Marketing Name)                                               Front Radar 5 Car Plus CAN CAN Flexray
 FVIN (Firmware Version Identification Number)                              -/-
 HMN (Host Marketing Name)                                                  -/-



This report is electronically signed and valid without handwriting signature. For verification of the electronic signatures, the
public keys can be requested at the testing laboratory.




Document authorised:
                               cn=Alexander Hnatovskiy, o=CTC                                    cn=Marco Scigliano, o=CTC advanced
                               advanced GmbH, ou=HNA-161129,                                     GmbH, ou=SCI-161125,
                               email=Alexander.Hnatovskiy@ctcadvance                             email=marco.scigliano@ctcadvanced.co
                               d.com, c=DE                                                       m, c=DE
                               2019.08.14 10:07:39 +02'00'                                       2019.08.14 10:08:32 +02'00'

Alexander Hnatovskiy                                                      Marco Scigliano
Lab Manager                                                               Testing Manager
Radio Communications & EMC                                                Radio Communications & EMC




© CTC advanced GmbH                                                Page 1 of 3


                                         Report no.: 1-7548/18-01-08



EUT technologies:

   Technologies:               Max. EIRP: (AVG)
  76.5 GHz Radar         Measured max. EIRP: 17.3 dBm*

)* detailed measurement results in CTC advanced test report 1-7548/18-01-03


Prediction of MPE limit at given distance - FCC

Equation from page 18 of OET Bulletin 65, Edition 97-01

S = PG / 4π R2

where: S = Power density
       P = Power input to the antenna
       G = Antenna gain
       R = Distance to the center of radiation of the antenna
       PG = Output Power including antenna gain

The table below is excerpted from Table 1B of 47 CFR 1.1310 titled “Limits for Maximum Permissible Exposure
(MPE), Limits for General Population/Uncontrolled Exposure”

     Frequency Range (MHz)                Power Density (mW/cm2)                Averaging Time (minutes)
            300 -1500                             f/1500                                   30
          1500 - 100000                             1.0                                    30

where f = Frequency (MHz)

Prediction: worst case


    Technology                                                  RADAR
    Frequency                                                     76500   MHz
P·G Declared max power input to the antenna                        17.3   dBm
R   Distance                                                         20   cm
S   MPE limit for uncontrolled exposure                          1.0000   mW/cm2
    Calculated Power density:                                    0.0107   mW/cm²
    Calculated percentage of limit:                              1.07%


This prediction demonstrates the following:

The power density levels for FCC at a distance of 20 cm are below the maximum levels allowed by regulations.




© CTC advanced GmbH                             Page 2 of 3


                                          Report no.: 1-7548/18-01-08



Prediction of MPE limit at given distance - IC

RSS-102, Issue 5, 2.5.2

RF exposure evaluation is required if the separation distance between the user and/or bystander and the
device’s radiating element is greater than 20 cm, except when the device operates as follows:
        • below 20 MHz and the source-based, time-averaged maximum e.i.r.p. of the device is equal to or less
        than 1 W (adjusted for tune-up tolerance);
        • at or above 20 MHz and below 48 MHz and the source-based, time-averaged maximum e.i.r.p. of the
        device is equal to or less than 4.49/ƒ0.5W (adjusted for tune-up tolerance), where ƒ is in MHz;
        • at or above 48 MHz and below 300 MHz and the source-based, time-averaged maximum e.i.r.p. of the
        device is equal to or less than 0.6 W (adjusted for tune-up tolerance);
        • at or above 300 MHz and below 6 GHz and the source-based, time-averaged maximum e.i.r.p. of the
        device is equal to or less than 1.31 x 10-2 ƒ0.6834 W (adjusted for tune-up tolerance), where ƒ is in MHz;
        • at or above 6 GHz and the source-based, time-averaged maximum e.i.r.p. of the device is equal to or
        less than 5 W (adjusted for tune-up tolerance).


Prediction: worst case

                                                                     76.5   GHz
        Frequency                                                  76500    MHz
R       Distance                                                       20   cm
P·G     Maximum EIRP (avg.)                                          17.3   dBm
P·G     Maximum EIRP (avg.)                                          53.7   mW
        Exclusion Limit from above:                                  5.00   W
        Calculated percentage of Limit:                        1.07%


Conclusion: RF exposure evaluation is not required.
            For applications where minimum distance to radiating element is 20cm Annex C of RSS-102
            should be filled out.




© CTC advanced GmbH                              Page 3 of 3



Document Created: 2019-08-14 10:08:32
Document Modified: 2019-08-14 10:08:32

© 2024 FCC.report
This site is not affiliated with or endorsed by the FCC