SAR attachment 1

FCC ID: N7NAC500

RF Exposure Info

Download: PDF
FCCID_1209286

Date/Time: 10/19/2009 8:38:23 AM Test Laboratory: Compliance Certification Services System Performance Check - D1900V2 DUT: Dipole; Type: D1900V2; Serial: 5d043 Communication System: System Check Signal - CW; Frequency: 1900 MHz;Duty Cycle: 1:1 Medium parameters used: f = 1900 MHz; σ = 1.5 mho/m; εr = 54; ρ = 1000 kg/m3 Phantom section: Flat Section Room Ambient Temperature: 24.0 deg. C; Liquid Temperature: 23.0 deg. C DASY4 Configuration: - Area Scan setting - Find Secondary Maximum Within: 2.0 dB and with a peak SAR value greater than 0.0012W/kg - Probe: EX3DV4 - SN3686; ConvF(6.85, 6.85, 6.85); Calibrated: 3/23/2009 - Sensor-Surface: 3mm (Mechanical Surface Detection) - Electronics: DAE3 Sn427; Calibrated: 10/20/2008 - Phantom: Flat Phantom ELI4.0; Type: QDOVA001BA; Serial: SN:XXXX - Measurement SW: DASY4, V4.7 Build 80; Postprocessing SW: SEMCAD, V1.8 Build 186 d=10mm, Pin=250mW/Area Scan (7x7x1): Measurement grid: dx=15mm, dy=15mm Maximum value of SAR (measured) = 9.82 mW/g d=10mm, Pin=250mW/Zoom Scan (7x7x7)/Cube 0: Measurement grid: dx=5mm, dy=5mm, dz=5mm Reference Value = 91.0 V/m; Power Drift = -0.210 dB Peak SAR (extrapolated) = 68.6 W/kg SAR(1 g) = 38.1 mW/g; SAR(10 g) = 20.2 mW/g Normalized to target power = 1 W and actual power = 0.25 W Maximum value of SAR (measured) = 47.9 mW/g 0 dB = 47.9mW/g

Date/Time: 10/19/2009 8:46:43 AM Test Laboratory: Compliance Certification Services System Performance Check - D1900V2 DUT: Dipole; Type: D1900V2; Serial: 5d043 Communication System: System Check Signal - CW; Frequency: 1900 MHz;Duty Cycle: 1:1 d=10mm, Pin=250mW/Z Scan (1x1x34): Measurement grid: dx=20mm, dy=20mm, dz=3mm Maximum value of SAR (measured) = 11.9 mW/g

Date/Time: 10/27/2009 4:23:15 PM Test Laboratory: Compliance Certification Services System Performance Check - D1900V2 DUT: Dipole; Type: D1900V2; Serial: 5d043 Communication System: System Check Signal - CW; Frequency: 1900 MHz;Duty Cycle: 1:1 Medium parameters used: f = 1900 MHz; σ = 1.5 mho/m; εr = 53.8; ρ = 1000 kg/m3 Phantom section: Flat Section Room Ambient Temperature: 24.0 deg. C; Liquid Temperature: 23.0 deg. C DASY4 Configuration: - Area Scan setting - Find Secondary Maximum Within: 2.0 dB and with a peak SAR value greater than 0.0012W/kg - Probe: EX3DV4 - SN3686; ConvF(6.85, 6.85, 6.85); Calibrated: 3/23/2009 - Sensor-Surface: 3mm (Mechanical Surface Detection) - Electronics: DAE3 Sn500; Calibrated: 9/15/2009 - Phantom: Flat Phantom ELI4.0; Type: QDOVA001BA; Serial: SN:XXXX - Measurement SW: DASY4, V4.7 Build 80; Postprocessing SW: SEMCAD, V1.8 Build 186 d=10mm, Pin=250mW/Area Scan (7x7x1): Measurement grid: dx=15mm, dy=15mm Maximum value of SAR (measured) = 9.81 mW/g d=10mm, Pin=250mW/Zoom Scan (7x7x7)/Cube 0: Measurement grid: dx=5mm, dy=5mm, dz=5mm Reference Value = 91.1 V/m; Power Drift = -0.140 dB Peak SAR (extrapolated) = 68.3 W/kg SAR(1 g) = 37.9 mW/g; SAR(10 g) = 20 mW/g Normalized to target power = 1 W and actual power = 0.25 W Maximum value of SAR (measured) = 48.1 mW/g 0 dB = 48.1mW/g

Date/Time: 10/27/2009 4:35:17 PM Test Laboratory: Compliance Certification Services System Performance Check - D1900V2 DUT: Dipole; Type: D1900V2; Serial: 5d043 Communication System: System Check Signal - CW; Frequency: 1900 MHz;Duty Cycle: 1:1 d=10mm, Pin=250mW/Z Scan (1x1x34): Measurement grid: dx=20mm, dy=20mm, dz=3mm Maximum value of SAR (measured) = 12 mW/g

Date/Time: 10/20/2009 8:42:10 AM Test Laboratory: Compliance Certification Services System Performance Check - D835V2 DUT: Dipole; Type: D835V2; Serial: 4d002 Communication System: System Check Signal - CW; Frequency: 835 MHz;Duty Cycle: 1:1 Medium parameters used: f = 835 MHz; σ = 0.968 mho/m; εr = 53.7; ρ = 1000 kg/m3 Phantom section: Flat Section Room Ambient Temperature: 24.0 deg. C; Liquid Temperature: 23.0 deg. C DASY4 Configuration: - Area Scan setting - Find Secondary Maximum Within: 2.0 dB and with a peak SAR value greater than 0.0012W/kg - Probe: EX3DV4 - SN3686; ConvF(8.7, 8.7, 8.7); Calibrated: 3/23/2009 - Sensor-Surface: 3mm (Mechanical Surface Detection) - Electronics: DAE3 Sn427; Calibrated: 10/20/2008 - Phantom: Flat Phantom ELI4.0; Type: QDOVA001BA; Serial: SN:1003 - Measurement SW: DASY4, V4.7 Build 80; Postprocessing SW: SEMCAD, V1.8 Build 186 d=15mm, Pin=250mW/Area Scan (7x9x1): Measurement grid: dx=15mm, dy=15mm Maximum value of SAR (measured) = 2.94 mW/g d=15mm, Pin=250mW/Zoom Scan (7x7x7)/Cube 0: Measurement grid: dx=5mm, dy=5mm, dz=5mm Reference Value = 55.2 V/m; Power Drift = -0.021 dB Peak SAR (extrapolated) = 15.0 W/kg SAR(1 g) = 10.1 mW/g; SAR(10 g) = 6.58 mW/g Normalized to target power = 1 W and actual power = 0.25 W Maximum value of SAR (measured) = 11.8 mW/g 0 dB = 11.8mW/g

Date/Time: 10/20/2009 8:47:25 AM Test Laboratory: Compliance Certification Services System Performance Check - D835V2 DUT: Dipole; Type: D835V2; Serial: 4d002 Communication System: System Check Signal - CW; Frequency: 835 MHz;Duty Cycle: 1:1 d=15mm, Pin=250mW/Z Scan (1x1x34): Measurement grid: dx=20mm, dy=20mm, dz=3mm Maximum value of SAR (measured) = 2.95 mW/g

Date/Time: 10/27/2009 8:38:10 AM Test Laboratory: Compliance Certification Services System Performance Check - D835V2 DUT: Dipole; Type: D835V2; Serial: 4d002 Communication System: System Check Signal - CW; Frequency: 835 MHz;Duty Cycle: 1:1 Medium parameters used: f = 835 MHz; σ = 0.969 mho/m; εr = 53.9; ρ = 1000 kg/m3 Phantom section: Flat Section Room Ambient Temperature: 24.0 deg. C; Liquid Temperature: 23.0 deg. C DASY4 Configuration: - Area Scan setting - Find Secondary Maximum Within: 2.0 dB and with a peak SAR value greater than 0.0012W/kg - Probe: EX3DV4 - SN3686; ConvF(8.7, 8.7, 8.7); Calibrated: 3/23/2009 - Sensor-Surface: 3mm (Mechanical Surface Detection) - Electronics: DAE3 Sn500; Calibrated: 9/15/2009 - Phantom: Flat Phantom ELI4.0; Type: QDOVA001BA; Serial: SN:1003 - Measurement SW: DASY4, V4.7 Build 80; Postprocessing SW: SEMCAD, V1.8 Build 186 d=15mm, Pin=250mW/Area Scan (7x9x1): Measurement grid: dx=15mm, dy=15mm Maximum value of SAR (measured) = 2.96 mW/g d=15mm, Pin=250mW/Zoom Scan (7x7x7)/Cube 0: Measurement grid: dx=5mm, dy=5mm, dz=5mm Reference Value = 55.4 V/m; Power Drift = -0.013 dB Peak SAR (extrapolated) = 15.2 W/kg SAR(1 g) = 10.2 mW/g; SAR(10 g) = 6.63 mW/g Normalized to target power = 1 W and actual power = 0.25 W Maximum value of SAR (measured) = 11.9 mW/g 0 dB = 11.9mW/g

Date/Time: 10/27/2009 8:48:39 AM Test Laboratory: Compliance Certification Services System Performance Check - D835V2 DUT: Dipole; Type: D835V2; Serial: 4d002 Communication System: System Check Signal - CW; Frequency: 835 MHz;Duty Cycle: 1:1 d=15mm, Pin=250mW/Z Scan (1x1x34): Measurement grid: dx=20mm, dy=20mm, dz=3mm Maximum value of SAR (measured) = 2.96 mW/g

Date/Time: 10/19/2009 7:48:36 PM Test Laboratory: Compliance Certification Services System Performance Check - D2000V2 DUT: Dipole 2000 MHz; Type: D2000V2; Serial: SN: 1016 Communication System: System Check Signal - CW; Frequency: 2000 MHz;Duty Cycle: 1:1 Medium parameters used: f = 2000 MHz; σ = 1.56 mho/m; εr = 53.3; ρ = 1000 kg/m3 Phantom section: Flat Section Room Ambient Temperature: 24.0 deg. C; Liquid Temperature: 23.0 deg. C DASY4 Configuration: - Area Scan setting - Find Secondary Maximum Within: 2.0 dB and with a peak SAR value greater than 0.0012W/kg - Probe: EX3DV4 - SN3686; ConvF(6.94, 6.94, 6.94); Calibrated: 3/23/2009 - Sensor-Surface: 3mm (Mechanical Surface Detection) - Electronics: DAE3 Sn427; Calibrated: 10/20/2008 - Phantom: Flat Phantom ELI4.0; Type: QDOVA001BA; Serial: SN:1003 - Measurement SW: DASY4, V4.7 Build 80; Postprocessing SW: SEMCAD, V1.8 Build 186 d=10mm, Pin=250mW/Area Scan (7x7x1): Measurement grid: dx=15mm, dy=15mm Maximum value of SAR (measured) = 9.99 mW/g d=10mm, Pin=250mW/Zoom Scan (7x7x7)/Cube 0: Measurement grid: dx=5mm, dy=5mm, dz=5mm Reference Value = 89.9 V/m; Power Drift = -0.020 dB Peak SAR (extrapolated) = 71.8 W/kg SAR(1 g) = 39.5 mW/g; SAR(10 g) = 20.7 mW/g Normalized to target power = 1 W and actual power = 0.25 W Maximum value of SAR (measured) = 50.1 mW/g 0 dB = 50.1mW/g

Date/Time: 10/19/2009 7:53:27 PM Test Laboratory: Compliance Certification Services System Performance Check - D2000V2 DUT: Dipole 2000 MHz; Type: D2000V2; Serial: SN: 1016 Communication System: System Check Signal - CW; Frequency: 2000 MHz;Duty Cycle: 1:1 d=10mm, Pin=250mW/Z Scan (1x1x34): Measurement grid: dx=20mm, dy=20mm, dz=3mm Maximum value of SAR (measured) = 12.6 mW/g

Date/Time: 10/27/2009 6:34:25 PM Test Laboratory: Compliance Certification Services System Performance Check - D2000V2 DUT: Dipole 2000 MHz; Type: D2000V2; Serial: SN: 1016 Communication System: System Check Signal - CW; Frequency: 2000 MHz;Duty Cycle: 1:1 Medium parameters used: f = 2000 MHz; σ = 1.55 mho/m; εr = 53.2; ρ = 1000 kg/m3 Phantom section: Flat Section Room Ambient Temperature: 24.0 deg. C; Liquid Temperature: 23.0 deg. C DASY4 Configuration: - Area Scan setting - Find Secondary Maximum Within: 2.0 dB and with a peak SAR value greater than 0.0012W/kg - Probe: EX3DV4 - SN3686; ConvF(6.94, 6.94, 6.94); Calibrated: 3/23/2009 - Sensor-Surface: 3mm (Mechanical Surface Detection) - Electronics: DAE3 Sn500; Calibrated: 9/15/2009 - Phantom: Flat Phantom ELI4.0; Type: QDOVA001BA; Serial: SN:1003 - Measurement SW: DASY4, V4.7 Build 80; Postprocessing SW: SEMCAD, V1.8 Build 186 d=10mm, Pin=250mW/Area Scan (7x7x1): Measurement grid: dx=15mm, dy=15mm Maximum value of SAR (measured) = 9.96 mW/g d=10mm, Pin=250mW/Zoom Scan (7x7x7)/Cube 0: Measurement grid: dx=5mm, dy=5mm, dz=5mm Reference Value = 90.0 V/m; Power Drift = -0.025 dB Peak SAR (extrapolated) = 71.6 W/kg SAR(1 g) = 39.6 mW/g; SAR(10 g) = 20.8 mW/g Normalized to target power = 1 W and actual power = 0.25 W Maximum value of SAR (measured) = 50.0 mW/g 0 dB = 50.0mW/g

Date/Time: 10/27/2009 6:46:27 PM Test Laboratory: Compliance Certification Services System Performance Check - D2000V2 DUT: Dipole 2000 MHz; Type: D2000V2; Serial: SN: 1016 Communication System: System Check Signal - CW; Frequency: 2000 MHz;Duty Cycle: 1:1 d=10mm, Pin=250mW/Z Scan (1x1x34): Measurement grid: dx=20mm, dy=20mm, dz=3mm Maximum value of SAR (measured) = 12.5 mW/g


Document Created: 2009-11-01 14:40:23
Document Modified: 2009-11-01 14:40:23
© 2024 FCC.report
This site is not affiliated with or endorsed by the FCC