manual part 3

FCC ID: N4ZFLYSKYGT2

Users Manual

Download: PDF
FCCID_1703271

     10.02 Power on:




     10.03 Shut down:




10


G F




      11


 12.01方向舵控制:




12


                                                                                                                       MODELS : FS—6GT2




                                                                                                      wwWw. FLYSKY—CN. COM )
12. 02% 1J 4# th1):




                                                                               e



                                                                                                  %
                                                                               —ffmn:




   Shfevit) :
   WoohfersHrtCk) Bopl, J:‘wfllli?uflf{}:flfl'fi?"l‘l“fiflufi tE . SmNMMANRNEFTA
   Xthalesymeme (foranimtaks®) @6
        K¥:
  9?191.}5, ENUEANeetrAir.
  Function Introduction:
  This function is to control the throttle speed, when pull the throtte trigger back,car will accelerate forward (see the picture),
  when push the throtfle trigger, the car will put on the brakes or double ring astern{according to the different ESC) (see the
  picture).
  Operation Method:
  To control it by pushing and pulling back the throttle trigger after power on.



                                          Http://www. flysky—en. com


      失控保护功能是对模型车或船进行失控保护,避免因失控造成损失。主要是对油门通道进行控制,当接
      收机接收不到控制信号时,接收机的油门通道将自运行到当初设定的值,以免误动作。




     Fa ilsafe aims to prevent out-of-control driving of RC Car or RC Bo at.If the Rec eiver is not able to receive
     any signal, from the control to Th rottle, the parameter of Th rottle on Rec eiver wi ll turn back to its original
     setting.




14


                                 ®                                                    MODELS : FS—GT2

FL9Y SEEEY                                   ‘

[                                                                    T14 .5/ITHILATE
Th§EDERA:
Mfifiéfliflffi&flwfim, Mio n36 t sa n 2t 17 & 3 . R t ty so MB th#e .
KttHX%:
 1. § 4) # #t ht o PB# (rs—su100)—##f# A &9 fDsCKRA, #%—##fArAARMUSBRN,
 2. 41 F7 K §4 HL t U8 .
 3. RIVRCEKREAE ¥A4F.
 4 B t th BE sk it w se 5e Bs 1t o #t t ma B e T .
 #1k:
 AAARRKMEVRCAAIMELHHKAK. KKARARA:—&EAMEM—MIKE. in KeRIEHEE
 vRCAARK. #!
Function Introduction:
This function is for the virtual RC racing through the computer, you can practise the racing from the
computer.
Operation Method:
1. Hook up the DSC port of your Transmitter to the USB adaptor (fs—sm100) and plug the USB adaptor
 into your PC notebook.
2.Turn on the Transmitter.
3.Open the VRC software.
4.Follow the on—screen instruction to set.
Remark:
The VRC software we provided is free which is offer only one basic track and training ground. If you
need any other track, please contact VRC Company, thank you!




                                                                   TO COMPUTER USB PORT
                                                                       MODEL NO: FS—SM100



                               Http://www. flysky—cn. com




                                      FS-GT2

                                    GT2
                                 INSTRUCTION MANUAL
                                   用户手册




   Digital propotional radio control sytem
Http://www.flysky-cn.com
Copy right 2008@flysky co.,ltd




                                                      17


FCC Statement

This equipment has been tested and found to comply with the limits for a Class B digital device,
pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable
protection against harmful interference in a residential installation. This equipment generates
uses and can radiate radio frequency energy and, if not installed and used in accordance with
the instructions, may cause harmful interference to radio communications. However, there is
no guarantee that interference will not occur in a particular installation. If this equipment does
cause harmful interference to radio or television reception, which can be determined by turning
the equipment off and on, the user is encouraged to try to correct the interference by one or
more of the following measures:
—Reorient or relocate the receiving antenna.
—Increase the separation between the equipment and receiver.
—Connect the equipment into an outlet on a circuit different from that to which the receiver is
connected.
—Consult the dealer or an experienced radio/TV technician for help.


FCC Radiation Exposure Statement

This device complies with FCC radiation exposure limits set forth for an uncontrolled
environment and it also complies with Part 15 of the FCC RF Rules. This transmitter must not
be co-located or operating in conjunction with any other antenna or transmitter.
Operation is subject to the following two conditions:
(1) this device may not cause harmful interference, and
(2) this device must accept any interference received, including interference that may cause
undesired operation.


Caution!

The manufacturer is not responsible for any radio or TV interference caused by unauthorized
modifications to this equipment. Such modifications could void the user authority to operate
the equipment.





Document Created: 2012-05-17 10:37:37
Document Modified: 2012-05-17 10:37:37

© 2024 FCC.report
This site is not affiliated with or endorsed by the FCC