MSQ9260D2L

FCC ID

Equipment: Intel Dual Band Wireless-AC 9260

ASUSTeK Computer Inc 9260D2L

4F, No. 150, Li-Te Rd., Peitou, Taipei, N/A 112 Taiwan

Application
Frequency Range
Final Action Date
Granted
2lWbfr+152of9vRTXQ86Yg==
5180.0-5240.0
2019-05-14
APPROVED
2lWbfr+152of9vRTXQ86Yg==
5190.0-5230.0
2019-05-14
APPROVED
2lWbfr+152of9vRTXQ86Yg==
5210.0-5210.0
2019-05-14
APPROVED
2lWbfr+152of9vRTXQ86Yg==
5260.0-5320.0
2019-05-14
APPROVED
2lWbfr+152of9vRTXQ86Yg==
5270.0-5310.0
2019-05-14
APPROVED
2lWbfr+152of9vRTXQ86Yg==
5290.0-5290.0
2019-05-14
APPROVED
2lWbfr+152of9vRTXQ86Yg==
5500.0-5700.0
2019-05-14
APPROVED
2lWbfr+152of9vRTXQ86Yg==
5510.0-5670.0
2019-05-14
APPROVED
2lWbfr+152of9vRTXQ86Yg==
5530.0-5690.0
2019-05-14
APPROVED
2lWbfr+152of9vRTXQ86Yg==
5710.0-5710.0
2019-05-14
APPROVED
2lWbfr+152of9vRTXQ86Yg==
5720.0-5720.0
2019-05-14
APPROVED
2lWbfr+152of9vRTXQ86Yg==
5745.0-5825.0
2019-05-14
APPROVED
2lWbfr+152of9vRTXQ86Yg==
5755.0-5795.0
2019-05-14
APPROVED
2lWbfr+152of9vRTXQ86Yg==
5775.0-5775.0
2019-05-14
APPROVED
HsxXKh8/2jjfZPcVX5gm4g==
2402.0-2480.0
2019-05-14
APPROVED
HsxXKh8/2jjfZPcVX5gm4g==
2412.0-2472.0
2019-05-14
APPROVED
HsxXKh8/2jjfZPcVX5gm4g==
2422.0-2462.0
2019-05-14
APPROVED
GxErw1d0pej/Sww0nRjNxA==
-
2019-05-14
APPROVED
fHHSjFW34F5IVxRTHtL0bw==
2402.0-2480.0
2019-05-14
APPROVED
File NameDocument TypeDateDirect
9260D2WL- LabelsmplID Label/Location Info 2019-05-14 00:00:00 pdf
9260D2WL- LabelLocID Label/Location Info 2019-05-14 00:00:00 pdf
9260D2WL- Declaration of authorizationCover Letter(s) 2019-05-14 00:00:00 pdf
9260D2WL- Declaration letter for electrically identicalCover Letter(s) 2019-05-14 00:00:00 pdf
9260D2WL- Confidentiality RequestCover Letter(s) 2019-05-14 00:00:00 pdf
9260D2WL- Auth Ltr Change of IDCover Letter(s) 2019-05-14 00:00:00 pdf
9260D2WL- ATTESTATIONCover Letter(s) 2019-05-14 00:00:00 pdf
9260D2WL- Declaration of authorization.pdfCover Letter(s) 2019-05-14 00:00:00 pdf
TempConfidential_9260D2WL- ExphoExternal Photos 2019-11-10 00:00:00 N/A

Application Details:

EquipmentIntel Dual Band Wireless-AC 9260
FRN0005821988
Grantee CodeMSQ
Product Code9260D2L
Applicant BusinessASUSTeK Computer Inc
Business Address4F, No. 150, Li-Te Rd. , Peitou, Taipei,N/A Taiwan 112
TCB ScopeA4: UNII devices & low power transmitters using spread spectrum techniques
TCB Email[email protected]
ApplicantJackson Yen – Associate Vice President
Applicant Phone
Applicant Fax+886-2-28987364
Applicant Email[email protected]
Applicant MailStop
Test FirmIntel Corporation S.A.S.
Test Firm ContactNawfal ASRIH
Test Firm Phone
Test Firm Fax0033493001401
Test Firm Email[email protected]
Certified ByVincent Lin –
Comment [2lWbfr+152of9vRTXQ86Yg==]: transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. This module is approved in mobile/portable configurations. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. Grantee must coordinate with OEM integrator to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB 616217 supplement documentation. When all conditions of this filing cannot be met installation of this device into specific final products may require the submission of a permissive change application, containing appropriate data demonstrating compliance, or a new application. This transmitter has 20MHz, 40MHz, 80MHz bandwidth modes as described in this filing. Device is a client only device containing a 2 x 2 MIMO configuration, enabled for either 2.4 or 5 GHz band operations as described in this filing. OEM/Host integrator must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product. The highest reported Body and Simultaneous SAR values are 0.79W/kg and 1.58W/kg respectively. This module is approved in portable/mobile configurations with antenna SkyCross reference Antenna, Type PIFA at 19mm minimum test separation distance. SAR testing was performed to demonstrate RF compliance.
Comment [fHHSjFW34F5IVxRTHtL0bw==]: Power Output listed is conducted. Modular Approval filing. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. End-users and installers must be provided with transmitter operating conditions for satisfying RF exposure compliance. The highest reported Body and Simultaneous SAR values are 0.02W/kg and 1.58W/kg respectively. This module is approved in portable/mobile configurations with antenna SkyCross reference Antenna, Type PIFA at 19mm minimum test separation distance. SAR testing was performed to demonstrate RF compliance.
Comment [HsxXKh8/2jjfZPcVX5gm4g==]: Power Output listed is conducted. Modular Approval. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. This module is approved in mobile/portable configurations. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. Grantee must coordinate with OEM integrator to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB 616217 Supplement documentation. When all conditions of this filing cannot be met installation of this device into specific final products may require the submission of a permissive change application, containing appropriate data demonstrating compliance, or a new application. OEM/Host integrator must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance. Device is a client only device containing a 2 x 2 MIMO configuration, enabled for either 2.4 or 5 GHz band operations as described in this filing. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product. The highest reported Body and Simultaneous SAR values are 0.31W/kg and 1.58W/kg respectively. This module is approved in portable/mobile configurations with antenna SkyCross reference Antenna, Type PIFA at 19mm minimum test separation distance. SAR testing was performed to demonstrate RF compliance.

© 2019 FCC.report
This site is not affiliated with or endorsed by the FCC