Test report

FCC ID: MRXFE3MAF4

Test Report

Download: PDF
FCCID_1577818

Date of Issue: November 7, 2011 Prepared For: Schrader Electronics Test Report No.: 20111107-01 Willow Run Test Labs, LLC 8501 Beck Road, Building 2227 Belleville, Michigan 48111 USA Tel: (734) 252 9785 Fax: (734) 926 9785 e-mail: info@wrtest.com Testing of Electromagnetic Emissions per USA: CFR Title 47, Part 15.231(a,e) Canada: RSS-210, RSS-GEN are herein reported for Schrader Electronics FE3MAF4 Test Report No.: 20111107-01 Copyright c 2011 Applicant/Provider: Schrader Electronics 11 Technology Park, Belfast Road, Antrim Northern Ireland BT41 1QS United Kingdom Phone: +44 28 9448 3073, Fax: +44 28 9446 8440 Contact Person: Adrian Condon; acondon@schrader.co.uk Measured by: Report Approved by: Dr. Joseph Brunett, EMC-002790-NE Dr. Joseph Brunett, EMC-002790-NE Report by: Report Date of Issue: November 7, 2011 Dr. Joseph Brunett, EMC-002790-NE Results of equipment under test (EUT) testing completed before November 7, 2011 are as follows. Emissions The transmitter fundamental emission meets the regulatory limit(s) by no less than 7.7 dB. Transmit chain spurious harmonic emissions comply by no less than 5.3 dB. Willow Run Test Labs, LLC, 8501 Beck Rd., Bldg 2227, Belleville, MI 48111 Page 1 of 14

Date of Issue: November 7, 2011 Prepared For: Schrader Electronics Test Report No.: 20111107-01 Contents 1 Test Specifications, General Procedures, and Location 3 1.1 Test Specification and General Procedures . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3 1.2 Test Location and Equipment Used . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4 2 Configuration and Identification of the Equipment Under Test 5 2.1 Description and Declarations . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5 2.1.1 EUT Configuration . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5 2.1.2 Modes of Operation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5 2.1.3 Variants . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6 2.1.4 Test Samples . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6 2.1.5 Functional Exerciser . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6 2.1.6 Modifications Made . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6 2.1.7 Production Intent . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6 2.1.8 Declared Exemptions and Additional Product Notes . . . . . . . . . . . . . . . . . . . . . . . . 6 3 Emissions 7 3.1 General Test Procedures . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7 3.1.1 Radiated Test Setup and Procedures . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7 3.1.2 Conducted Test Setup and Procedures . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9 3.1.3 Power Supply Variation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9 3.1.4 Thermal Variation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9 3.2 Intentional Emissions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10 3.2.1 Fundamental Emission Pulsed Operation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10 3.2.2 Fundamental Emission Bandwidth . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12 3.2.3 Fundamental Emission . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13 3.3 Unintentional Emissions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14 3.3.1 Transmit Chain Spurious Emissions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14 List of Tables 1 Willow Run Test Labs, LLC Equipment List. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4 2 EUT Declarations. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5 3 Pulsed Emission Characteristics (Duty Cycle). . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10 4 Intentional Emission Bandwidth. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12 5 Fundamental Radiated Emissions. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13 6 Transmit Chain Spurious Emissions. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14 List of Figures 1 Photographs of the EUT. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5 2 EUT Test Configuration Diagram. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6 3 Radiated Emissions Diagram of the EUT. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7 4 Radiated Emissions Test Setup Photograph(s). . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8 5 Pulsed Emission Characteristics (Duty Cycle). . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10 5 Pulsed Emission Characteristics (Duty Cycle). . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11 6 Intentional Emission Bandwidth. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12 Willow Run Test Labs, LLC, 8501 Beck Rd., Bldg 2227, Belleville, MI 48111 Page 2 of 14

Date of Issue: November 7, 2011 Prepared For: Schrader Electronics Test Report No.: 20111107-01 1 Test Specifications, General Procedures, and Location 1.1 Test Specification and General Procedures The ultimate goal of Schrader Electronics is to demonstrate that the EUT complies with the Rules and/or Directives below. Detailed in this report are the results of testing the Schrader Electronics FE3MAF4 for compliance to: Country/Region Rules or Directive Referenced Section(s) United States Code of Federal Regulations CFR Title 47, Part 15.231(a,e) Canada Industry Canada RSS-210, RSS-GEN In association with the rules and directives outlined above, the following specifications and procedures are followed herein. ”Methods of Measurement of Radio-Noise Emissions from Low-Voltage Electri- ANSI C63.4-2003 cal and Electronic Equipment in the Range of 9 kHz to 40 GHz” Industry Canada ”The Measurement of Occupied Bandwidth” Willow Run Test Labs, LLC, 8501 Beck Rd., Bldg 2227, Belleville, MI 48111 Page 3 of 14

Date of Issue: November 7, 2011 Prepared For: Schrader Electronics Test Report No.: 20111107-01 1.2 Test Location and Equipment Used Test Location The EUT was fully tested at Willow Run Test Labs, LLC, 8501 Beck Road, Building 2227, Belleville, Michigan 48111 USA. The Open Area Test Site (OATS) description and attenuation characteristics are on file with the FCC Laboratory, Columbia, Maryland (FCC Reg. No: 688478) and with Industry Canada, Ottawa, ON (File Ref. No: IC 8719A-1). Test Equipment Pertinent test equipment used for measurements at this facility is listed in Table 1. The quality system employed at Willow Run Test Labs, LLC has been established to ensure all equipment has a clearly identifiable classification, calibration expiry date, and that all calibrations are traceable to the SI through NIST, other recognized national laboratories, accepted fundamental or natural physical constants, ratio type of calibration, or by comparison to consensus standards. Table 1: Willow Run Test Labs, LLC Equipment List. Description Manufacturer/Model SN Quality Number Last Cal By / Date Due Antennas Shielded Loop (9 kHz - 50 MHz) EMCO/6502 2855 UMLOOP1 UMRL / July-2012 Dipole Set (20 MHz - 1000 MHz) EMCO/3121C 9504-1121 DIPEMC001 Liberty Labs / Sept-2012 Bicone (20 MHz - 250 MHz) JEF 1 BICJEF001 UMRL / July-2012 Bicone (200 MHz - 1000 MHz) JEF 1 SBICJEF001 UMRL / July-2012 Log-Periodic Array (200 MHz - 1000 MHz) JEF/Isbell 1 LOGJEF001 UMRL / July-2012 Ridge-Horn Antenna Univ. of Michigan 5 UMHORN005 UMRL / July-2012 L-Band JEF HRNL001 JEF / July-2012* LS-Band Horns JEF/NRL 001, 002 HRN15001, HRN15002 JEF / July-2012* S-Band Horns Scientific-Atlanta 1854 HRNSB001 JEF / July-2012* C-Band JEF/NRL 1 HRNC001 JEF / July-2012* XN-Band Horns JEF/NRL 001, 002 HRNXN001, HRNXN002 JEF / July-2012* X-Band Horns JEF/NRL 001, 002 HRNXB001, HRNXB002 JEF / July-2012* Ku-Band Horns JEF/NRL 001, 002 HRNKU001, HRNKU002 JEF / July-2012* Ka-Band Horns JEF/NRL 001, 002 HRNKA001, HRNKA002 JEF / July-2012* Receiver’s / Spectrum Analyzers Spectrum Analyzer HP/8593E 3649A02722 HP8593E001 DTI / Sept-2012 Signal Generators Tracking Generator HP/8593E 3649A02722 HP8593E001 DTI / Sept-2012 Line Impedance Stabilization Networks LISN EMCO 9304-2081 LISNEM001 JEF / Jan-2012 * Verification Only - Standard Gain Horn Antennas Willow Run Test Labs, LLC, 8501 Beck Rd., Bldg 2227, Belleville, MI 48111 Page 4 of 14

Date of Issue: November 7, 2011 Prepared For: Schrader Electronics Test Report No.: 20111107-01 2 Configuration and Identification of the Equipment Under Test 2.1 Description and Declarations The EUT is a wireless tire pressure and temperature sensor. The equipment under test (EUT) is approximately 6 x 3 x 1.5 cm (without stem) in dimension, and is depicted in Figure 1. It is powered by a 3 VDC Lithium cell battery. In use, this device is permanently affixed as the valve-stem in the tire of a motor vehicle. Table 2 outlines provider declared Figure 1: Photographs of the EUT. EUT specifications. Table 2: EUT Declarations. General Declarations Equipment Type: TPMS Country of Origin: UK Nominal Supply: 3 VDC Oper. Temp Range: −40o C to +85o C Frequency Range: 315 MHz Antenna Dimension: 46 mm Antenna Type: Tire Stem (monopole) Antenna Gain: -5 dBi (declared) Number of Channels: One (1) Channel Spacing: Not Applicable Alignment Range: ±0.1 MHz Type of Modulation: ASK + FSK United States FCC ID Number: MRXFE3MAF4 Classification: DSC Canada Remote Control De- IC Number: 2546A-FE3MAF4 Classification: vice, Vehicular Device 2.1.1 EUT Configuration The EUT is configured for testing as depicted in Figure 2. 2.1.2 Modes of Operation The EUT is capable of three key modes of operation. Upon manually activated LF interrogation (through the use of special LF tool at a vehicle dealership), the EUT responds with a singe transmission containing a number of frames used to configure the device with the vehicle. When the EUT is placed in the vehicle tire and the vehicle drives, it can, in the worst case, periodically transmit where the duration of each transmission is always less than 1 second and the silent period between transmissions is at least 30 times the duration of the transmission, and never less than 10 seconds. In the case of an emergency condition, the EUT will transmit tire pressure and temperature information throughout the duration of the condition. Willow Run Test Labs, LLC, 8501 Beck Rd., Bldg 2227, Belleville, MI 48111 Page 5 of 14

Date of Issue: November 7, 2011 Prepared For: Schrader Electronics Test Report No.: 20111107-01 Schrader Electronics TPMS FCC ID: MRXFE3MAF4 IC: 2546A-FE3MAF4 Figure 2: EUT Test Configuration Diagram. 2.1.3 Variants There is only a single variant of the EUT, as tested. Normal samples were actuated for worst case on time, worst case emission bandwidth, and CW mode. Please see the description of operation exhibit supplied with this filing detailing the operating modes of this device. 2.1.4 Test Samples Three samples in total were provided. Two normal samples capable of normal, test, and CW mode activation. One sample un-potted for testing and photographs. 2.1.5 Functional Exerciser Not Applicable. 2.1.6 Modifications Made There were no modifications made to the EUT by this laboratory. 2.1.7 Production Intent The EUT appears to be a production ready sample. 2.1.8 Declared Exemptions and Additional Product Notes The EUT is permanently installed in a transportation vehicle. As such, digital emissions are exempt from US and Canadian digital emissions regulations (per FCC 15.103(a) and IC correspondence on ICES-003). The EUT also employs some modes of operation that alert the vehicle user of sudden changes in tire pressure. Such alert modes fall under FCC 15.231(a)(4), and may operate during the pendency of the alarm condition. A detailed list of all operating modes is included in the Description of Operation exhibit included in this application. Willow Run Test Labs, LLC, 8501 Beck Rd., Bldg 2227, Belleville, MI 48111 Page 6 of 14

Date of Issue: November 7, 2011 Prepared For: Schrader Electronics Test Report No.: 20111107-01 3 Emissions 3.1 General Test Procedures 3.1.1 Radiated Test Setup and Procedures Radiated electromagnetic emissions from the EUT are first evaluated in our shielded fully anechoic chamber. Spec- trum and modulation characteristics of all emissions are recorded, and emissions above 1 GHz are fully characterized. The anechoic chamber contains a set-up similar to that of our outdoor 3-meter site, with a turntable and antenna mast. Instrumentation, including spectrum analyzers and other test equipment as detailed in Section 1.2 are em- ployed. After indoor pre-scans, emission measurements up to 1 GHz are made on our outdoor 3-meter Open Area Test Site (OATS). If the EUT connects to auxiliary equipment and is table or floor standing, the configurations prescribed in ANSI C63.4 / CISPR 22 are followed. Alternatively, a layout closest to normal use (as declared by the provider) is employed if the resulting emissions appear to be worst-case in such a configuration. See Figure 3. Long Interface Cables EUT Power Long Interface Cables (to AUX) AUX Power (to EUT) Equipment Under Test Auxiliary (EUT) Short Interface Cables Equipment (AUX) Radiated Emissions Table Figure 3: Radiated Emissions Diagram of the EUT. All intentionally radiating elements are placed on the test table lying flat, on their side, and on their end (3-axes) and the resulting worst case emissions are recorded. For both horizontal and vertical polarizations, the test antenna is raised and lowered from 1 to 4 m in height until a maximum emission level is detected. The EUT is then rotated through 360o in azimuth until the highest emission is detected. The test antenna is then raised and lowered one last time from 1 to 4 m and the worst case value is recorded. If the EUT exhibits spurious emissions due to internal receiver circuitry, such emissions are measured with an appropriate carrier signal applied. For devices with intentional emissions below 30 MHz, a shielded loop antenna is used as the test antenna. It is placed at a 1 meter receive height and appropriate low frequency magnetic field extrapolation to the regulatory limit distance is employed. Emissions between 30 MHz and 1 GHz are measured using tuned dipoles and/or calibrated broadband antennas. Emissions above 1 GHz are characterized using standard gain horn antennas. Care is taken to ensure that test receiver resolution and video bandwidths meet the regulatory requirements, and that the emission bandwidth of the EUT is not reduced. Photographs of the test setup employed are depicted in Figure 4. Willow Run Test Labs, LLC, 8501 Beck Rd., Bldg 2227, Belleville, MI 48111 Page 7 of 14

Date of Issue: November 7, 2011 Prepared For: Schrader Electronics Test Report No.: 20111107-01 Figure 4: Radiated Emissions Test Setup Photograph(s). Willow Run Test Labs, LLC, 8501 Beck Rd., Bldg 2227, Belleville, MI 48111 Page 8 of 14

Date of Issue: November 7, 2011 Prepared For: Schrader Electronics Test Report No.: 20111107-01 3.1.2 Conducted Test Setup and Procedures Battery Power Conducted Spurious The EUT is not subject to power line conducted emissions measurements when it is powered solely by its internal battery. 3.1.3 Power Supply Variation Tests at extreme supply voltages are made if required by the the procedures specified in the test standard, and results of this testing are detailed in this report. DC Extreme Voltages If the EUT is designed for operation from a lead-acid battery power source, the extreme test voltages are evaluated between 90% and 130% of the nominal battery voltage declared by the manufacturer. For float charge applications using gel-cell type batteries, extreme test voltages are evaluated between 85% and 115% of the nominal battery voltage declared. For all battery operated equipment, worst case intentional and spurious emissions are re-checked employing a new (fully charged) battery. 3.1.4 Thermal Variation Tests at extreme temperatures are made if required by the procedures specified in the test standard, and results of this testing are detailed in this report. The provider has declared that the EUT is designed for operation over the temperature range −40o C to +85o C. Before any temperature measurements are made, the equipment is allowed to reach a thermal balance in the test chamber, temperature and humidity are recorded, and thermal balance is verified via a thermocouple based probe. Willow Run Test Labs, LLC, 8501 Beck Rd., Bldg 2227, Belleville, MI 48111 Page 9 of 14

Date of Issue: November 7, 2011 Prepared For: Schrader Electronics Test Report No.: 20111107-01 3.2 Intentional Emissions 3.2.1 Fundamental Emission Pulsed Operation The details and results of testing the EUT for pulsed operation are summarized in Table 3. Plots showing the measurements made to obtain these values are provided in Figure 5. Table 3: Pulsed Emission Characteristics (Duty Cycle). Test Date: 23-Oct-11 Detector IF Bandwidth Video Bandwidth Test Engineer: Joseph Brunett Pk 1 MHz 3 MHz Meas Distance: 10 cm FCC/IC Overall Transmission Internal Frame Characteristics Computed Min. Max. Total Min. Duty Cycle Repetition No. of Transmission Max. Frame Frame # EUT Test Mode* Rate (sec) Frames Length (sec) Length (ms) Period (ms) Frame Encoding (%) (dB) Each transmission consists of 8 ASK frames followed by 5 FSK frames. Each ASK frame LF Activated 8.2680 is 8.2680 ms of Manchester encoding with "LEARN" mode 60.0 (ASK), 1 Single 13 < 1.0 (ASK), 50% duty repeated with 60.0 ms minimum 7.75 <-20 (ASK + FSK). 100.0 (FSK) 7.7500 (FSK) period.. Each FSK frame is 7.7500 ms in See Figure (a) length with minim rep rate of 100 ms. Worst case duty arrises during FSK modulation. Worst-case Rolling Mode 2 30 4 < 1.0 7.7500 100.0 Same as FSK modulation above 7.75 <-20 (FSK Only). See Figure (b) Figure 5(a): Pulsed Emission Characteristics (Duty Cycle). Willow Run Test Labs, LLC, 8501 Beck Rd., Bldg 2227, Belleville, MI 48111 Page 10 of 14

Date of Issue: November 7, 2011 Prepared For: Schrader Electronics Test Report No.: 20111107-01 Figure 5(b): Pulsed Emission Characteristics (Duty Cycle). Willow Run Test Labs, LLC, 8501 Beck Rd., Bldg 2227, Belleville, MI 48111 Page 11 of 14

Date of Issue: November 7, 2011 Prepared For: Schrader Electronics Test Report No.: 20111107-01 3.2.2 Fundamental Emission Bandwidth Emission bandwidth (EBW) of the EUT is measured with the device placed in the test mode(s) with the shortest available frame length and minimum frame spacing. Radiated emissions are recorded following the test procedures listed in Section 1.1. The 20 dB EBW is measured as the max-held peak-detected signal when the IF bandwidth is greater than or equal to 1% of the receiver span. For complex modulations other than ASK and FSK, the 99% emission bandwidth per IC test procedures has a different result, and is also separately reported.The results of EBW testing are summarized in Table 4. Plots showing measurements employed to obtain the emission bandwidth reported are provided in Figure 6. Table 4: Intentional Emission Bandwidth. Test Date: 23-Oct-11 Detector IF Bandwidth Video Bandwidth Test Engineer: Joseph Brunett Pk 10 kHz 30 kHz EUT Mode: Modulated Meas. Distance: 10 cm FCC/IC Center Frequency 20 dB EBW EBW Limit # Mode (MHz) (MHz) (MHz) 1 ASK + FSK 315 0.155 0.7875 2 Figure 6: Intentional Emission Bandwidth. Willow Run Test Labs, LLC, 8501 Beck Rd., Bldg 2227, Belleville, MI 48111 Page 12 of 14

Date of Issue: November 7, 2011 Prepared For: Schrader Electronics Test Report No.: 20111107-01 3.2.3 Fundamental Emission Following the test procedures listed in Section 1.1, radiated emissions measurements are made on the EUT for both Horizontal and Vertical polarized fields. Table 5 details the results of these measurements. Table 5: Fundamental Radiated Emissions. Frequency Range Det IF Bandwidth Video Bandwidth Test Date: 1-Nov-11 25 MHz ≤ f ≤ 1 000 MHz Pk/QPk 120 kHz 300 kHz Test Engineer: Joseph Brunett f > 1 000 MHz Pk 3 MHz 3MHz EUT Mode: CW f > 1 000 MHz Avg 3 MHz 10kHz Meas. Distance: 3 meters FCC/IC Freq. Ant. Ant. Pr (Pk) Pr (Avg)* Ka Kg E3(Pk) E3(Avg) FCC/IC (Avg) E3lim Pass # MHz Used Pol. dBm dBm dB/m dB dBµV/m dBµV/m dBµV/m dB 1 315 Dip H -23.4 -43.4 18.6 22.2 80.0 60.0 67.7 7.7 2 315 Dip V -26.6 -46.6 18.6 22.2 76.8 56.8 67.7 10.9 3 4 5 6 Freq. DC Supply Relative Pr (Pk) MHz Voltage dBm** 7 315 2.50 -49.9 8 315 2.75 -49.4 9 315 3.00 -49.3 10 315 3.25 -48.8 11 315 3.50 -48.5 *Avg data computed from Peak Measured Data and EUT Duty Cycle. EUT in CW mode. ** EUT in CW mode. Willow Run Test Labs, LLC, 8501 Beck Rd., Bldg 2227, Belleville, MI 48111 Page 13 of 14

Date of Issue: November 7, 2011 Prepared For: Schrader Electronics Test Report No.: 20111107-01 3.3 Unintentional Emissions 3.3.1 Transmit Chain Spurious Emissions The results for the measurement of transmit chain spurious emissions at the nominal voltage and temperature are provided in Table 6. Measurements are performed to 10 times the highest fundamental operating frequency. Table 6: Transmit Chain Spurious Emissions. Frequency Range Det IF Bandwidth Video Bandwidth Test Date: 1-Nov-11 25 MHz ≤ f ≤ 1 000 MHz Pk/QPk 120 kHz 300 kHz Test Engineer: Joseph Brunett f > 1 000 MHz Pk 1 MHz 3 MHz EUT Mode: CW f > 1 000 MHz Avg 1 MHz 10kHz Meas. Distance: 3 meters Transmitter Unintentional Spurious Emissions FCC/IC Freq. Ant. Ant. Pr (Pk) Pr (Avg)* Ka Kg E3(Pk) E3(Avg) FCC/IC E3lim (Avg) Pass # MHz Used Pol. dBm dBm dB/m dB dBµV/m dBµV/m dBµV/m dB Comments 1 630.0 Dip H -62.3 -82.3 24.4 19.1 50.0 30.0 47.7 17.7 side 2 630.0 Dip V -62.7 -82.7 24.4 19.1 49.6 29.6 47.7 18.1 end 3 945.0 Dip H -57.5 -77.5 19.3 6.5 62.3 42.3 47.7 5.3 flat 4 945.0 Dip V -59.6 -79.6 19.3 6.5 60.2 40.2 47.7 7.4 end 5 1260.0 R-Horn H -45.7 -65.7 20.6 22.4 59.5 39.5 54.0 14.5 flat 6 1575.0 R-Horn H -48.1 -68.1 21.5 29.2 51.1 31.1 54.0 22.9 flat 7 1890.0 R-Horn H -50.0 -70.0 22.2 31.2 48.0 28.0 54.0 26.0 flat 8 2205.0 R-Horn H -50.4 -70.4 23.0 30.9 48.6 28.6 54.0 25.3 flat 9 2520.0 R-Horn H -58.3 -78.3 23.9 29.8 42.8 22.8 54.0 31.2 flat 10 2835.0 R-Horn H -63.5 -83.5 24.8 28.6 39.7 19.7 54.0 34.3 flat 11 3150.0 R-Horn H -61.4 -81.4 25.8 27.5 43.9 23.9 54.0 30.0 side 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 *Avg data computed from Peak Measured Data and EUT Duty Cycle. EUT in CW mode. Willow Run Test Labs, LLC, 8501 Beck Rd., Bldg 2227, Belleville, MI 48111 Page 14 of 14


Document Created: 2011-11-07 11:46:28
Document Modified: 2011-11-07 11:46:28
© 2024 FCC.report
This site is not affiliated with or endorsed by the FCC