Test Report

FCC ID: M5LR3STS

Test Report

Download: PDF
FCCID_1316692

Report No.: F-R1007002 Page 1 of 13 Rev:None Test Report Client Information: Applicant: Sigma Elektro GmbH Applicant add.: Dr.-Julius-Leber-Strabe 15, 67433 Neustadt an der Weinstrabe, Germany EUT Information: EUT Name: heart rate and speed transmitter Model No.: R3 Brand Name: Sigma FCC ID M5LR3STS Prepared By: Asia Institute Technology (Dongguan) Limited Add. : No.6 Binhe Road, Tianxin Village, Huangjiang, Dongguan, Guangdong, China. Date of Receipt: Jul. 12, 2010 Date of Test: Jul. 13-19, 2010 Date of Issue: Jul. 19, 2010 Test Result: Pass Test procedure used: ANSI C63.4-2003 This device described above has been tested by Asia Institute Technology (Dongguan) Limited, and the test results show that the equipment under test (EUT) is in compliance with the FCC requirements. And it is applicable only to the tested sample identified in the report. *This test report must not be used by the client to claim product endorsement by any agency of the U.S. government. Reviewed by: Approved by: Test director Technical director Asia Institute Technology (Dongguan) Limited No,6.Binhe Road, Tianxin Village, Huangjiang, Dongguan, Guangdong, China.

Report No.: F-R1007002 Page 2 of 13 Rev:None 1 Contents Page COVER PAGE 1 CONTENTS ...........................................................................................................................................................2 1.1 COMPLIANCE WITH FCC PART 15 SUBPART C .....................................................................................................3 1.2 MEASUREMENT UNCERTAINTY ............................................................................................................................3 2 TEST FACILITY.....................................................................................................................................................4 2.1 DEVIATION FROM STANDARD...............................................................................................................................4 2.2 ABNORMALITIES FROM STANDARD CONDITIONS ....................................................................................................4 3 GENERAL INFORMATION ...................................................................................................................................5 3.1 GENERAL DESCRIPTION OF EUT ........................................................................................................................5 3.2 DESCRIPTION OF TEST CONDITIONS ....................................................................................................................6 3.3 PERIPHERAL LIST...............................................................................................................................................7 4 EQUIPMENTS LIST FOR ALL TEST ITEMS .......................................................................................................7 5 TEST RESULT.......................................................................................................................................................8 5.1 CONDUCTION EMISSIONS MEASUREMENT ...........................................................................................................8 5.1.1 limit...........................................................................................................................................................8 5.1.2 Test procedure.........................................................................................................................................8 5.1.3 Test result ................................................................................................................................................8 5.2 TIMING OF THE TRANSMITTER .............................................................................................................................9 5.3 RADIATED EMISSIONS MEASUREMENT ..............................................................................................................10 5.3.1 Limit........................................................................................................................................................10 5.3.2 Test procedure.......................................................................................................................................10 5.3.3 Test Result.............................................................................................................................................11 5.4 TEST SETUP PHOTOGRAPH...............................................................................................................................13 6 APPENDIX-Photographs of EUT Constructional Details Asia Institute Technology (Dongguan) Limited No,6.Binhe Road, Tianxin Village, Huangjiang, Dongguan, Guangdong, China.

Report No.: F-R1007002 Page 3 of 13 Rev:None 1.1 Compliance with FCC Part 15 subpart C Test FCC rule part Result Timing of the transmitter (Duty cycle Section 15.31(c) PASS correction factor ) Radiated Emissions Section 15.209 PASS Conducted Emissions Limits Section 15.107/15.207 N/A 1.2 Measurement Uncertainty All measurements involve certain levels of uncertainties, The following measurements uncertainty Level have estimated based on ANSI C63.4:2003, the maximum value of the uncertainty as below No. Item Uncertainty 1 Conducted Emission Test ±1.38dB 2 Radiated Emission Test ±3.57dB Asia Institute Technology (Dongguan) Limited No,6.Binhe Road, Tianxin Village, Huangjiang, Dongguan, Guangdong, China.

Report No.: F-R1007002 Page 4 of 13 Rev:None 2 Test Facility The test facility is recognized, certified or accredited by the following organizations: .FCC- Registration No: 248337 The 3m Semi-Anechoic Chamber, 3m/10m Open Area Test Site and Shielding Room of Asia Institute Technology (Dong guan) Limited have been registered by Federal Communications Commission (FCC) on Dec.07, 2006. .Industry Canada(IC)-Registration No: IC6819A-1 & IC6819A-2 The 3m Semi-Anechoic Chamber and 3m/10m Open Area Test Site of Asia Institute Technology (Dongguan) Limited have been registered by Certification and Engineering Bureau of Industry Canada for radio equipment testing on Nov.07, 2006. .VCCI- Registration No: R-2482 & C-2730 The 3m/10m Open Area Test Site and Shielding Room of Asia Institute Technology (Dongguan) Limited have been registered by Voluntary Control Council for Interference on Jan.24, 2007. .TUV Rhineland Asia Institute Technology (Dongguan) Limited has been assessed on Jan.16, 2007 that it can carry out EMC tests by order and under supervision of TUV Rhineland. .ITS- Registration No: TMPSHA031 Asia Institute Technology (Dongguan) Limited has been assessed and included in Intertek Shanghai TMP Program regarding Laboratory facilities and test equipment on Nov.10, 2006. 2.1 Deviation from standard None 2.2 Abnormalities from standard conditions None Asia Institute Technology (Dongguan) Limited No,6.Binhe Road, Tianxin Village, Huangjiang, Dongguan, Guangdong, China.

Report No.: F-R1007002 Page 5 of 13 Rev:None 3 General Information 3.1 General Description of EUT Manufacturer: IDT Technology Limited Manufacturer Address: Block C,9/F.,Kaiser Estate，Phase 1，41 Man Yue Street，Hunghom，Kowloon EUT Name: heart rate and speed transmitter Model No: R3 Operation frequency: 112kHz Channel Number: 1 AntennaType: Integrated antenna Brand Name: Sigma Serial No: N/A Power Supply Range: DC 3V From battery Power Supply: DC 3V From battery Power Cord: N/A Signal Cable: N/A Description of Channel: Channel No. Frequency(kHz) 1 112 Asia Institute Technology (Dongguan) Limited No,6.Binhe Road, Tianxin Village, Huangjiang, Dongguan, Guangdong, China.

Report No.: F-R1007002 Page 6 of 13 Rev:None 3.2 Description of Test conditions (1) EUT was tested in normal configuration (Please See following Block diagram) 1. Block diagram of EUT configuration EUT (2) E.U.T. test conditions: 15.31(e) :For intentional radiators, measurements of the variation of the input power or the adiated signal level of the fundamental frequency component of the emission, as appropriate, shall be performed with the supply voltage varied between 85% and 115% ofthe nominal rated supply voltage. For battery operated equipment, theequipment tests shall be performed using a new battery. (3) Test frequencies: According to the 15.31(m) Measurements on intentional radiators or receivers, other than TV broadcast receivers, shall be performed and. if required. reported for each band in which the device can be operated with the device operating at the number of fequencies in each band specified in the following table: Frequency range over Number of Location in which device operates frequencies the range of operation 1 MHz or less 1 Middle 1 to 10 MHz 2 1 near top and 1 near bottom 1 near top, 1 near middle and More than 10 MHz 3 1 near bottom . Asia Institute Technology (Dongguan) Limited No,6.Binhe Road, Tianxin Village, Huangjiang, Dongguan, Guangdong, China.

Report No.: F-R1007002 Page 7 of 13 Rev:None 3.3 Peripheral List No. Equipment Manufacturer Model No. Serial No. Power cord signal cable 1 N/A N/A N/A N/A N/A N/A 4 Equipments List for All Test Items Cal. Due No Test Equipment Manufacturer Model No Serial No Cal. Date Date 1 Spectrum Analyzer ADVANTEST R3182 150900201 2010.04.17 2011.04.16 EMI Measuring 2 Schaffner SCR3501 235 2010.04.07 2011.04.06 Receiver Low Noise Pre 3 Tsj MLA-10K01-B01-27 1205323 2010.03.07 2010.09.06 Amplifier Low Noise Pre 4 Tsj MLA-0120-A02-34 2648A04738 2010.04.08 2011.04.07 Amplifier TRILOG Super 5 Broadband test SCHWARZBECK VULB9160 9160-3206 2010.07.16 2011.07.15 Antenna 7 50Ω Coaxial Switch Anritsu MP59B 6200264416 2010.03.07 2010.09.06 8 EMI Test Receiver R&S ESCI 100124 2009.12.28 2010.12.27 9 Loop Antenna 650 ARA PLA-1030/B 1030 2010.03.20 2011.03.19 Asia Institute Technology (Dongguan) Limited No,6.Binhe Road, Tianxin Village, Huangjiang, Dongguan, Guangdong, China.

Report No.: F-R1007002 Page 8 of 13 Rev:None 5 Test Result 5.1 Conduction Emissions Measurement 5.1.1 limit Frequency of Emission (MHz) Conducted Limit (dBμV) Quasi-peak Average 0.15-0.5 66 to 56 * 56 to 46 * 0.5-5 56 46 5-30 60 50 Note:Decreases with the logarithm of the frequency. 5.1.2 Test procedure EUT was placed upon a wooden test table 0.8m above the horizontal metal reference plane and 0.4m from the vertical ground plane, and it was connected to an AMN. The closest distance between the boundary of the EUT and the surface of the AMN is 0.8m. All peripherals were connected to another AMN, and placed at a distance of 10cm from each other. A spectrum and receiver was connected to the RF output port of the AMN. Both average and quasi-peak value were detected. 5.1.3 Test result Cause the EUT only employ battery power for operation and which do not operate from the AC power lines or contain provisions for operation while connected to the AC power lines. Measurements to demonstrate compliance with the conducted limits are not required for devices Asia Institute Technology (Dongguan) Limited No,6.Binhe Road, Tianxin Village, Huangjiang, Dongguan, Guangdong, China.

Report No.: F-R1007002 Page 9 of 13 Rev:None 5.2 Timing of the transmitter RBW 300 Hz Delta 3 [T1 ] * VBW 300 Hz -24.10 dB Ref 87 dBµV * Att 10 dB SWT 100 ms -10.800000 ms Marker 1 [T1 ] LIMIT CHECK PASS 33.22 dBµV 80 57.800000 ms B Delta 2 [T1 ] 1 AP 70 2.28 dB VIEW 14.400000 ms 60 TDF 50 PS 40 2 1 30 3DB AC 20 3 10 0 -10 Center 112 kHz 10 ms/ Date: 19.JUL.2010 11:55:14 Limits: § 15.35 (c) (c) Unless otherwise specified, e.g. Section 15.255(b), when the radiated emission limits are expressed in terms of the average value of the emission, and pulsed operation is employed, the measurement field strength shall be determined by averaging over one complete pulse train, including blanking intervals, as long as the pulse train does not exceed 0.1 seconds. As an alternative (provided the transmitter operates for longer than 0.1 seconds) or in cases where the pulse train exceeds 0.1 seconds, the measured field strength shall be determined from the average absolute voltage during a 0.1 second interval during which the field strength is at its maximum value. The exact method of calculating the average field strength shall be submitted with any application for certification or shall be retained in the measurement data file for equipment subject to notification or verification. Asia Institute Technology (Dongguan) Limited No,6.Binhe Road, Tianxin Village, Huangjiang, Dongguan, Guangdong, China.

Report No.: F-R1007002 Page 10 of 13 Rev:None 5.3 Radiated Emissions Measurement 5.3.1 Limit The limits on the field strength of the spurious emissions in the above table are based on the fundamental frequency of the intentional radiator. Spurious emissions shall be attenuated to the average (or, alternatively, CISPR quasi-peak) limits shown in this table or to the general limits shown in 93 Section 15.209, whichever limit permits a higher field strength. Field Strength Measurement Distance Frequency of Emission (MHz) μV/m dBμV/m (meters) 0.009 – 0.490 2400 / F (kHz) 300 0.490 – 1.705 24000 / F (kHz) 30 1.705 – 30.0 30 29.5 30 30-88 100 40 3 88-216 150 43.5 3 216-960 200 46 3 Above 960 500 54 3 5.3.2 Test procedure EUT was placed upon a wooden test table which was placed on the turn table 0.8m above the horizontal metal ground plane, and operating in the mode as mentioned above. A receiving antenna was placed 3m away from the EUT. During testing, turn around the turn table and move the antenna from 1m to 4m to find the maximum field-strength reading. All peripherals were placed at a distance of 10cm between each other. Both horizontal and vertical antenna polarities were tested and performed pretest to three orthogonal axis. The worst case emissions were reported. And according15.35(a) On any frequency or frequencies below or equal to 1000 MHz, the limits shown are based on measuring equipment employing a CISPR quasi-peak detector function and related measurement bandwidths, unless otherwise specified. The specifications for the measuring instrument using the CISPR quasi-peak detector can be found in Publication 16 of the International Special Committee on Radio Interference (CISPR) of the International Electrotechnical Commission. As an alternative to CISPR quasi-peak measurements, the responsible party, at its option, may demonstrate compliance with the emission limits using measuring equipment employing a peak detector function, properly adjusted for such factors as pulse desensitization, as long as the same bandwidths as indicated for CISPR quasi-peak measurements are employed. Asia Institute Technology (Dongguan) Limited No,6.Binhe Road, Tianxin Village, Huangjiang, Dongguan, Guangdong, China.

Report No.: F-R1007002 Page 11 of 13 Rev:None 5.3.3 Test Result Test Data: 2010-7-15 Frenqucy Range: 9kHz to 30MHz RBW/VBW: 200Hz/200Hz Measurement Distance: 3 m Operating Environment: 25°C, 58% RH, 102 Kpa Frequency Correct Reading Measure Margin Limit Detector Type (kHz) Factor Level Level (dB) (dBuV/m) (dB) (dBuV) (dBuV/m) 56.00 4.895 23.56 48.445 -48.445 113.00 QUASIPEAK 112.00 5.001 42.25 67.251 -39.749 107.00 QUASIPEAK 140.00 5.101 31.45 56.551 -48.449 105.00 QUASIPEAK 224.00 5.224 25.65 50.874 -50.126 101.00 QUASIPEAK 560.00 5.368 20.10 45.468 -7.532 53.00 QUASIPEAK 28000 8.224 15.24 23.464 -6.036 29.50 QUASIPEAK Note: ‘*’ means the worst case Measurement Level = Reading Level + Factor Factor=Ant Factor + Cable Loss Asia Institute Technology (Dongguan) Limited No,6.Binhe Road, Tianxin Village, Huangjiang, Dongguan, Guangdong, China.

Report No.: F-R1007002 Page 12 of 13 Rev:None Test Data: 2010-7-15 Frenqucy Range: 30MHz to 1GHz RBW/VBW: 100KHz/300KHz for spectrum, RBW=120KHz for receiver Measurement Distance: 3 m Operating Environment: 25°C, 58% RH, 102 Kpa (a) Antenna polarization: Horizontal Frequency Correct Reading Measure Margin Limit Detector Type (MHz) Factor Level Level (dB) (dBuV/m) (dB) (dBuV) (dBuV/m) 53.280 13.980 2.454 16.434 -23.566 40.000 QUASIPEAK 137.670 15.730 3.117 18.847 -24.653 43.500 QUASIPEAK 395.690 19.750 1.540 21.290 -24.710 46.000 QUASIPEAK 589.690 24.530 1.259 25.789 -20.211 46.000 QUASIPEAK 892.330 29.550 1.829 31.379 -14.621 46.000 QUASIPEAK 935.980 30.130 3.994 34.124 -11.876 46.000 QUASIPEAK (b) Antenna polarization: vertical Frequency Correct Reading Measure Margin Limit Detector Type (MHz) Factor Level Level (dB) (dBuV/m) (dB) (dBuV) (dBuV/m) 44.550 14.110 4.656 18.766 -21.234 40.000 QUASIPEAK 135.730 15.570 4.842 20.412 -23.088 43.500 QUASIPEAK 143.490 16.140 4.272 20.412 -23.088 43.500 QUASIPEAK 169.680 16.220 3.637 19.857 -23.643 43.500 QUASIPEAK 192.960 13.960 6.452 20.412 -23.088 43.500 QUASIPEAK 305.480 17.270 5.722 22.992 -23.008 46.000 QUASIPEAK Note: ‘*’ means the worst case Measurement Level = Reading Level + Factor Factor=Ant Factor + Cable Loss Asia Institute Technology (Dongguan) Limited No,6.Binhe Road, Tianxin Village, Huangjiang, Dongguan, Guangdong, China.

Report No.: F-R1007002 Page 13 of 13 Rev:None 5.4 Test Setup photograph Asia Institute Technology (Dongguan) Limited No,6.Binhe Road, Tianxin Village, Huangjiang, Dongguan, Guangdong, China.


Document Created: 2010-07-23 18:45:37
Document Modified: 2010-07-23 18:45:37
© 2024 FCC.report
This site is not affiliated with or endorsed by the FCC