MPE REPORT

FCC ID: LDK-SPA232D

RF Exposure Info

Download: PDF
FCCID_1762062

FCC ID: LDK—SPA232D Sheet 29 of 88 Sheets IC ID: 5005A¥—SPA232D ETC Report No.: 12—01—MAS—118—02 6.11 Safety exposure levels 6.11.1 Standard Applicable: FCC 15.319(i) & RSS—102 Section 4 UPCS devices are subject to the radio frequency radiation exposure requirements specified in FCC parts 1.1307 (b), 2.1091 and 2.1093, as appropriate. All equipment shall be considered to operate in a "general population / uncontrolled environment. For portable devices tests according to IEEE 1528 are requested, if applicable. RSS—102 Section 4 and IC Safety Code 6, Section 2.2.1 (a) A person other than an RF and microwave exposed worker shall not be exposed to electromagnetic radiation in a frequency band listed in Column 1 of Table 5, if the field strength exceeds the value given in Column 2 or 3 of Table 5, when averaged spatially and over time, or if the power density exceeds the value given in Column 4 of Table 5, when averaged spatially and over time. Table 5 Exposure Limits for Persons Not Classed As RF and Microwave Ex— posed Workers (Including the General Public) F‘eqfltflcy Elue.-cu'zc "ield Magne?ic: Field Fn:;er M&rigr-; (MHzi Strencth rms Strength; rms Density Time (Vim) (AJm) (Wimn) tmin} 9.303—1 230 213 6 110 280/f 21Y9f 6 _ 10 30 _ 28 2191 6 3C—30J 28 U.Ji3 2° 6 490—* 500 15t5j95 o.uc42]"* J180 6 1 50¢C—15 O0¢ 61.4 0163 1¢ | 6 15 00¢C—153 0¢) 61.4 0.163 1¢ 613 oco j * 159 100 300000 o188;*9 421x 10¢f"° s:.erx10%f s1s o0c0/f2 * Powesr density hkmit is agplicab e at fr:quencies greater thar. 130 MHz. wotes: I Frequzncy. /, is in MHz. 2. A power densiy af 1O WAm~ is equivalent to I!ll‘lin/ar" i. A magnetic Ned strength of 1 At cnmsmndstu I “Inm:-iefiauuh or 12.67 milliganss ({mC) 6.11.2 Measurement procedure Consideration of radio frequency radiation exposure for EUT is done as SAR test according IEEE1528 (for PP) C MPE calculation as below (for FP, Repeater) 4 SAR test results: not applicable Electronics Testing Center, Taiwan No.8, Lane 29, Wenming RD., LeShan Tsuen, GuiShan Shiang, Taoyuan County 33383, Taiwan, R.O.C. Rev. No 1.0

FCC ID: LDK—SPA232D Sheet 30 of 88 Sheets IC ID: 5005A¥—SPA232D ETC Report No.: 12—01—MAS—118—02 MPE calculation: The EUT is considered as a mobile device according to OET Bulletin 65, Edition —97—01. Therefore distance to human body of min. 20 cm is determined. The limit of Power density for General Population / Umcontrolled Exposure is 1.0 mW/cm*. Formula: S = EIRP / 4tR* Calculation: EIRP Radiated Power (dBm) 19.75 EIRP Radiated Power (mW) 94 .4 R Distance (cm) 20 S Power Density (mW/cm*) 0.0188 The Pd at 20 cm distance calculated from the Friis transmission formula is mush smaller than the limit requirement 1 mW/cm* or 10W/m* . The Installation Manual instructs the user to install the device such that it has a separation of at least 20 cm from persons to comply with the FCC‘s requirements. This separation of 20 cm more than meets the FCC‘s and Industry Canada RF exposure requirements. 6.11.3 Results : Complies Electronics Testing Center, Taiwan No.8, Lane 29, Wenming RD., LeShan Tsuen, GuiShan Shiang, Taoyuan County 33383, Taiwan, R.O.C. Rev. No 1.0


Document Created: 2019-09-28 10:37:06
Document Modified: 2019-09-28 10:37:06
© 2024 FCC.report
This site is not affiliated with or endorsed by the FCC