User manual

FCC ID: KA2CHS161A1

Users Manual

Download: PDF
FCCID_4023022

1 2 3 4 5 Model: DCH-S161 SN: LLPP1XXXXX Wi-Fi Name(SSID): DCH-S161-XXXX Wi-Fi Password: XXXXXXX PIN Code: XXXXXX New Users: mydlink No.: XXXXXXX Tap Sign Up to register for a mydlink account, then tap Add a Device to install your water sensor. Continue to follow the onscreen instructions. OR Tap Yes to scan the setup code on the back of the DCH-S161. Scan the QR code above to download the mydlink app for your Continue to follow the onscreen instructions to complete Android or iOS device. the setup process. Note: This product is NOT COMPATIBLE with mydlink Lite. Note: Please ensure that your mobile device is connected Connect the sensor cable to the bottom of the water sensor. Remove the battery cover by gently pressing down on the tab. to the same Wi-Fi network of the router that you plan on x2 Insert the two AA batteries and reattach battery cover. If you are a mydlink Lite user, sign in to the new app with the same connecting the DCH-S161 to. username and password and your existing cameras will appear in the Existing Users: new app. Sign in using your mydlink account and tap the icon at the top left, then tap Add a Device to start the setup wizard. Continue to follow the onscreen instructions.

? Canada Statement Wi-Fi Water Sensor This device complies with Industry Canada’s licence-exempt RSSs. Operation is subject to the following two conditions: (1) This device may not cause interference; and FCC Statement (2) This device must accept any interference, including interference that may cause Device Information This equipment has been tested and found to comply with the limits for a Class undesired operation of the device. DCH-S161 Frequently Asked Questions Minimum Requirements B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential Le présent appareil est conforme aux CNR d’Industrie Canada applicables aux Quick Start Guide 1) What can I do if my water sensor is not working properly To install this product, you will need: installation. This equipment generates, uses and can radiate radio frequency energy appareils radio exempts de licence. L’exploitation est autorisée aux deux conditions • A 802.11n/g router (a router with a WPS button is and, if not installed and used in accordance with the instructions, may cause suivantes : or I’m having problems setting it up? harmful interference to radio communications. However, there is no guarantee that (1) l’appareil ne doit pas produire de brouillage; Reset Button recommended) Action Button / LED interference will not occur in a particular installation. If this equipment does cause (2) l’utilisateur de l’appareil doit accepter tout brouillage radioélectrique subi, même Reset the water sensor by pressing the Reset button using a • An Internet connection harmful interference to radio or television reception, which can be determined si le brouillage est susceptible d’en compromettre le fonctionnement. paperclip and try setting the water sensor up again. • An e-mail account (required to register for mydlink service) by turning the equipment off and on, the user is encouraged to try to correct the In addition, please verify that: • The mydlink™ app is available for iPhone®, iPad® and interference by one or more of the following measures: The device meets the exemption from the routine evaluation limits in section 2.5 • your Internet connection is working. Android™ devices. Please refer to the mobile app's store page —Reorient or relocate the receiving antenna. of RSS 102 and compliance with RSS-102 RF exposure, users can obtain Canadian • your router’s wireless is turned on. to check whether your device is compatible. —Increase the separation between the equipment and receiver. information on RF exposure and compliance. —Connect the equipment into an outlet on a circuit different from that to which Le dispositif rencontre l'exemption des limites courantes d'évaluation dans la • the AA batteries are inserted correctly and have power. the receiver is connected. section 2.5 de RSS 102 et la conformité à l'exposition de RSS-102 rf, utilisateurs peut • your water sensor is on the same network as your mobile —Consult the dealer or an experienced radio/TV technician for help. obtenir l'information canadienne sur l'exposition et la conformité de rf. device (for initial setup). FCC Radiation Exposure Statement This transmitter must not be co-located or operating in conjunction with any other This device complies with FCC radiation exposure limits set forth for an uncontrolled antenna or transmitter. This equipment should be installed and operated with a environment and it also complies with Part 15 of the FCC RF Rules. This equipment minimum distance of 20 centimeters between the radiator and your body. 2) How do I turn off the siren? Press the Action Button once to turn off the siren. When next Support must be installed and operated in accordance with provided instructions and the antenna(s) used for this transmitter must be installed to provide a separation Cet émetteur ne doit pas être Co-placé ou ne fonctionnant en même temps distance of at least 20 cm from all persons and must not be co-located or operating qu'aucune autre antenne ou émetteur. Cet équipement devrait être installé et The device is booting up or has been reset successfully. time the water sensor detects flooding, the siren will sound For troubleshooting tips and more information, visit: in conjunction with any other antenna or transmitter. End-users and installers must actionné avec une distance minimum de 20 centimètres entre le radiateur et votre again. support.dlink.com be provided with antenna installation instructions and consider removing the no- corps. Ready for setup or the device lost its Wi-Fi connection. collocation statement. For technical support, call: Battery replacement warning 1-877-453-5465 (USA) 1-800-361-5265 (CAN) This device complies with Part 15 of the FCC Rules. Operation is subject to the Risk of explosion if the battery is replaced by an incorrect type. following two conditions: This product contain build in battery that need to be removed by a specialist before The device is connecting to a Wi-Fi network. the product disposal mandatory (1) this device may not cause harmful interference, and Version 1.00 (US)_70x110 (2) this device must accept any interference received, including interference that The device successfully connected to a Wi-Fi network. August 22, 2018 may cause undesired operation. Keep the battery away from excessive heat and direct sunlight. Do not place it on FCC: DCH-S161 heating device such as microwave Owen stoves or radiators The LED will turn off shortly after. Copyright ©2018 All rights reserved. D-Link and the D-Link logo are registered Caution! Battery may explode if overheated. Recommended if possible IC:DCH-S161A1 trademarks of D-Link Corporation or its subsidiaries. Product specifications, size and Any changes or modifications not expressly approved by the party responsible for shape are subject to change without notice, and actual product appearance may compliance could void the user's authority to operate the equipment. (1)Risk of explosion if battery is replaced by an incorrect type. differ from that depicted on the packaging. Visit dlink.com for more details. (2)Dispose of used batteries according to the instructions.


Document Created: 2018-09-28 16:00:38
Document Modified: 2018-09-28 16:00:38
© 2024 FCC.report
This site is not affiliated with or endorsed by the FCC