User Manual

FCC ID: K7SF7U085

Users Manual

Download: PDF
FCCID_4193269

Die Line File: IDL_F7U085_STUDIO BY BELKIN 10W WIRELESS CHARGING PAD REV 0 00 Artwork File: Business Unit: Core DIE LAYOUT Program Manager: Packaging Engineer: Matthew Duffy BOM F7U085 P# Outer box Refer Artwork Retail Outside Dimension (Including Hang Tab) PET Tray ROW: 7100-01130 Rev A00 QIG/FCC Statement Card Refer Artwork L x W x D (in): Wafer seal (2pcs) 25 mm Hanger folded in the case pack L x W x D (mm): DIE/MATERIAL SPECS: Material: 350gsm C1S SBS (20pt) Blank Size (in): 12+31/32 x 10+7/32 53/16 107/32 [131.762] [259.556] Blank Size (mm): 329+13/32 x 259.556 This dieline works for following skus (if any): MARKETING: APPROVED APPROVED W/ CHANGES RESUBMIT SIGN/DATE PRODUCT MGNT: APPROVED APPROVED W/ CHANGES RESUBMIT SIGN/DATE RC : APPROVED APPROVED W/ CHANGES RESUBMIT SIGN/DATE SUSTAINABILITY : APPROVED APPROVED W/ CHANGES RESUBMIT SIGN/DATE CREATIVE: PROOFING: APPROVED APPROVED APPROVED W/ CHANGES APPROVED W/ CHANGES RESUBMIT RESUBMIT SIGN/DATE SIGN/DATE 2 41/4 [50.800] [107.950] 1231/32 [329.406] I N N O VAT I O N C R E AT I V E G R O U P 571 5 8 FILE NAME RC_F7U085-BLK_8820-02841_RevA00_Studio_Wireless_Charging_Pad_10W_Insert QIG/FCC Statement Unit: IN/MM SKU# F7U085-BLK P# 8820-02841 REV A00 DESIGNER Phyllis DATE 02/15/19 1:54 PM VERSION 01 70 gsm Woodfree paper Side Shown: PRINT SIDE Safety Instructions: The Connected Equipment Warranty will remain effective for the Warranty Period set out below. The Connected Equipment Warranty Note: Although Belkin does not make these promises in this warranty, you may have additional rights under consumer laws. Any repaired or replacement products are warranted for the remainder of the original Warranty Period or 30 days, whichever is longer. All 1. Please read these instructions before using the device to ensure safe and proper use. automatically ends when the Product Warranty ends. products and parts that are replaced become the property of Belkin. 2. Connect the wall adapter of the wireless charging pad into a socket outlet that is close by and is easy to disconnect from the source. Will the Product Warranty always apply? 3. Use indoors and in a dry location only; keep away from wet or damp locations. This warranty does not apply to products purchased from a source other than Belkin or a Belkin Authorized Reseller. If you make an eligible claim in relation to your damaged Connected Equipment under the Connected Equipment Warranty, Belkin will, at its 4. Keep wireless charging pad and wall adapter away from any liquids or moisture. The Product Warranty does not apply if: option: 5. Unplug the wireless charging pad when unused for long periods of time. How long is the product warranted and what is the maximum value of the Connected Equipment Warranty? • the product has been tampered with or the assembly seal has been removed or damaged; (1) pay the reasonable costs of repairing the damaged Connected Equipment as assessed by Belkin in its sole discretion; 6. Do not store your device in very hot or very cold areas. It is recommended to use your device at room temperatures. • the product has been altered or modified by someone other than Belkin; (2) replace the damaged Connected Equipment with a reasonably available equivalent new or refurbished Connected Equipment (in 7. Caution: If you experience problems with the wireless charging pad, please discontinue use, unplug the wall adapter of the wireless charging pad Belkin warrants that the hardware in this Belkin, Linksys or WeMo product, and any associated software media, will be free from defects in • the warranty claim was made fraudulently or by misrepresentation; which case we will engage the repair facility and negotiate and settle the cost of repair); or from the AC socket, and contact Belkin for assistance. materials and workmanship under normal use during the Warranty Period. The Warranty Period begins on the date the product was purchased • the product was not installed, operated, repaired, or maintained in accordance with Belkin’s instructions (for example, this warranty will not (3) refund you the fair market value of the damaged Connected Equipment as reasonably assessed by Belkin in its sole discretion. 8. Do not use if visible defects are observed on the wireless charging pad or wall adapter. Do not attempt to service or disassemble. by the original end-user purchaser and lasts for the period set out in the table below. Belkin’s total liability under the Connected Equipment apply if the product has been used outdoors or in a wet area, or if the product has been used together with a generator, heater, sump pump, Warranty shall not exceed the maximum aggregate monetary limits set forth in the table below: water-related device, life support device, medical device, car, motorcycle, or golf-cart battery charger). To be used indoors only and in dry Belkin makes every reasonable effort to repair or replace your damaged Connected Equipment under this warranty. However, as the repaired WARRANTY AND SUPPORT INFORMATION areas. All warranties contained herein are null and void if used in any way with any of the aforementioned devices; or replacement Connected Equipment is manufactured by third parties, Belkin does not make any warranty in relation to such repaired or • the product has been subjected to abnormal physical or electrical stress, misuse, negligence, or accident; replacement Connected Equipment, nor is Belkin able to confirm that the manufacturer of the Connected Equipment will offer such a warranty. Flute/Grain: horizontal IMPORTANT! Product Type Warranty Period Maximum Monetary Limit (US Dollars) • damage to the product is cosmetic, including scratches and dents, or defects caused by normal wear and tear or normal aging of the product; • the serial number on the product has been altered, defaced, or removed; All calculations performed by Belkin in evaluating your claim under this warranty are final and binding on you except in the case of errors. PLEASE RETAIN PROOF OF PURCHASE AND PRODUCT WARRANTY INFORMATION New products 2 years • the product was used in conjunction with other extension cords, power strips, adapters, UPSes, surge protectors, other grounding wires or electrical connections; or For Belkin to properly and expeditiously validate your claim under this Product Warranty and / or the Connected Equipment Warranty, you • the product was supplied or licensed for beta, evaluation, testing or demonstration purposes, and you didn’t buy or license the product. agree that Belkin may examine the damaged product, the damaged Connected Equipment and/or the site where the damage occurred. Belkin BELKIN PRODUCT AND CONNECTED EQUIPMENT LIMITED WARRANTY Refurbished products 1 years reserves its right to do these things until any claim under the Product Warranty and / or the Connected Equipment Warranty is finalised. The (CONNECTED EQUIPMENT WARRANTY NOT AVAILABLE IN LATIN AMERICA) WIRELESS CHARGING PAD 10W damaged product and damaged Connected Equipment must remain available for inspection during that time. Do not dispose of the product This warranty is provided to you by Belkin International, Inc, or one of its subsidiaries or affiliates (“Belkin”) Repaired products The longer of the original Will Belkin cover damage to Connected Equipment in all situations under the Connected Equipment Warranty? and Connected Equipment until your claim has been fully resolved. Please review the section titled What do I need to do to make a claim?” Warranty Period or 30 days under the header “Belkin Technical and Warranty Support Information” below. $2,500 USD Belkin does not cover damage to Connected Equipment in the following situations: IMPORTANT NOTICE REGARDING YOUR CONSUMER RIGHTS The benefits we give in this manufacturer’s warranty are additional to any rights and remedies that you may have under local consumer Replacement products The longer of the original • the product was purchased in Latin America, including Mexico, Central America, South America, and the Caribbean (excluding any U.S. or Once your claim under this warranty is fully settled, Belkin reserves the right to be subrogated under any existing insurance policies that you protection laws. Nothing in this warranty limits or affects your legal rights. Warranty Period or 30 days Canadian territories in these regions); may have. SKU/MODEL: F7U085 • the Product Warranty has expired or does not apply (please see section above); • the Connected Equipment was not properly or directly connected to the product; Tolerance:+/- 1/32" - 0.8mm This manufacturer’s warranty is governed by the laws of the country in which you purchased your Belkin, Linksys or WeMo product. In many Software media (if provided 90 days Note: The rights and remedies outlined above are the only rights and remedies available under this warranty. However, you may have countries, consumers have rights under local consumer laws. Those consumer rights may differ between countries, states and provinces, and with the product) • not all wires leading into the Connected Equipment, including telephone and coaxial lines, pass through the appropriate product; additional rights under consumer laws. often cannot be excluded. Your local consumer rights organization can advise you on your legal rights. • damage to the Connected Equipment was not caused by an Occurrence; N/A • the power outlet to which the product was connected was not properly grounded or not grounded at all; GENERAL EXCLUSIONS AND LIMITATIONS OF LIABILITY This manufacturer’s warranty is not intended to: • the Connected Equipment has been subjected to abnormal physical or electrical stress, misuse, negligence, or accident; • change or exclude any rights under consumer law that cannot be lawfully changed or excluded; or • damage to the Connected Equipment is cosmetic (including scratches and dents), or damage was caused by normal wear and tear or IN THOSE JURISDICTIONS WHERE IT CAN LAWFULLY DO SO, AND TO THE MAXIMUM EXTENT PERMITTED BY APPLICABLE LAW, If the Protected Light indicator on your Belkin product does not come on because your product is dead on arrival, your product will remain normal aging of the Connected Equipment; • limit or exclude any right you have against the person who sold the Belkin, Linksys or WeMo product to you if that person has breached covered under this warranty. A product is considered dead on arrival when it does not work when you try to power it on for the first time. Please BELKIN, ITS RESELLERS AND ITS SUPPLIERS HEREBY DISCLAIM AND EXCLUDE ALL OTHER WARRANTIES, EXPRESS, STATUTORY OR their sales contract with you. contact Belkin Technical Support within sixty (60) days from the date of purchase of your product for a replacement (see the section on “Belkin • damage to the Connected Equipment was caused by an Act of God (other than lightning), including but not limited to typhoon, hurricane, IMPLIED, INCLUDING BUT NOT LIMITED TO IMPLIED WARRANTIES OF MERCHANTABILITY, ACCEPTABILITY, SATISFACTORY QUALITY, Technical and Warranty Support Information” below). A product given to replace a product that is dead on arrival shall be covered by a fresh erosion, earthquake, thunderstorm, inclement weather, flood, tsunami, vandalism, theft, or war; NON-INFRINGEMENT, TITLE, FITNESS FOR A PARTICULAR PURPOSE, LOSS OF OR DAMAGE TO DATA, LACK OF VIRUSES OR FREE WHAT DOES THIS WARRANTY COVER? warranty having the same duration as the original Warranty Period. • damage to the Connected Equipment was caused by a power outage, a sustained low voltage situation, or a low-voltage disturbance, FROM VIRUS OR MALWARE ATTACK, SECURITY, PERFORMANCE, LACK OF NEGLIGENCE, WORKMANLIKE EFFORT, QUIET ENJOYMENT, including but not limited to brownouts or sags; THAT THE FUNCTIONS CONTAINED IN THE PRODUCT WILL MEET YOUR REQUIREMENTS, OR THAT DEFECTS IN THE PRODUCT WILL • repair or replacement of the damaged Connected Equipment is covered by a third party’s manufacturer’s warranty, a seller’s extended BE CORRECTED, OR THAT YOUR USE OF THE PRODUCT WILL GENERATE ACCURATE, RELIABLE, TIMELY RESULTS, INFORMATION, Product Warranty: Belkin warrants that the product hardware and any software media (i.e., media on which the product software is provided) If the Protected Light indicator on the product goes out at any time, this means that the capacity of the product is exceeded, and the product MATERIAL OR DATA. NO ORAL OR WRITTEN INFORMATION OR ADVICE GIVEN BY BELKIN, A DEALER, AGENT OR AFFILIATE SHALL will be free from defects in materials and workmanship under normal use during the Warranty Period described below. This means that the will no longer protect against surges and spikes of energy. Therefore, if the Protected Light indicator on your product goes out, we strongly warranty, or your insurance policy; • Belkin determines that the Connected Equipment was not used under normal operating conditions or in accordance with the CREATE A WARRANTY. TO THE EXTENT WARRANTIES CANNOT BE DISCLAIMED OR EXCLUDED, THEY ARE LIMITED TO THE DURATION product won’t be defective, and that it will look and work as advertised during the relevant period. recommend that you cease using the product immediately. In such an event, if the product is still within the Warranty Period and if none of the OF THE RELEVANT EXPRESS WARRANTY PERIOD. Drawing Scale 1:1 Product and Warranty Information exclusions set out in this warranty apply, please contact Belkin Technical Support for a replacement product. manufacturer’s instructions for the Connected Equipment; or Connected Equipment Warranty: Belkin also covers damage to any equipment which is connected through the Belkin product to a properly EXCEPT AS PROVIDED IN THIS WARRANTY AND TO THE MAXIMUM EXTENT PERMITTED BY APPLICABLE LAW, IN NO EVENT SHALL wired AC power line with protective ground (Connected Equipment) caused by failure of the Belkin product to operate as described in the A claim under this warranty is only eligible if it is made within the Warranty Period. you continue to use the product in the knowledge that the Protected Light indicator has gone out. BELKIN, ITS AFFILIATES, ASSOCIATES, DEALERS, AGENTS OR SUPPLIERS OR THEIR RESPECTIVE OFFICERS, DIRECTORS, EMPLOYEES, product documentation and arising as a result of impulses from lightning, or other power transients, or by momentary (less than 1ms) voltage LICENSORS AND ASSIGNS BE LIABLE FOR ANY DIRECT, INDIRECT, EXEMPLARY, PUNITIVE, SPECIAL, INCIDENTAL OR CONSEQUENTIAL surges or spikes (an Occurrence) during the Warranty Period (Connected Equipment Warranty). What isn’t covered by the Product Warranty and Connected Equipment Warranty? Note: Although this warranty doesn’t apply in these situations, you may have additional rights under consumer laws. DAMAGES WHATSOEVER (INCLUDING BUT NOT LIMITED TO DAMAGES FOR LOSS OF PROFITS OR REVENUE, FOR BUSINESS INTERRUPTION, FOR PERSONAL INJURY, FOR LOSS OF PRIVACY, FOR LOSS OF ABILITY TO USE ANY THIRD PARTY PRODUCTS OR The Connected Equipment Warranty will not apply if damage to the Connected Equipment resulted from: Belkin does not give any warranty: How will Belkin make things right? SERVICES, FOR FAILURE TO MEET ANY DUTY INCLUDING OF GOOD FAITH OR OF REASONABLE CARE, FOR NEGLIGENCE, AND FOR ANY • telephone-line transients if the Connected Equipment was not properly connected to or was not directly connected to a Belkin product that OTHER PECUNIARY OR OTHER LOSS WHATSOEVER), REGARDLESS OF THE THEORY OF LIABLITY (CONTRACT, TORT OR OTHERWISE) offers telephone-line transient protection; If you make an eligible claim in relation to your defective Belkin product under the Product Warranty, Belkin will, at its election: ARISING OUT OF OR IN ANY WAY RELATED TO THE USE OF OR INABILITY TO USE THE PRODUCT, EVEN IF BELKIN OR SUCH OTHER • in relation to software or services, provided by Belkin or any third party, included in or with the product or Connected Equipment; ENTITIES HAVE BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES. IN NO EVENT SHALL THE TOTAL AGGREGATE LIABILITY OF • coaxial-line transients if the Connected Equipment was not properly connected to or was not directly connected to a Belkin product that • that the product, software or services will always operate uninterrupted or error free; offers coaxial-line transient protection; or BELKIN, ITS AFFILIATES, ASSOCIATES, DEALERS, AGENTS OR SUPPLIERS TO YOU FOR ALL DAMAGES EXCEED THE PRICE YOU PAID FOR • that the product, software or services, or any equipment, system or network on which the product, software or services are used are 100% • repair the product with new or refurbished parts, or pay the reasonable costs of repairing the product; THE PRODUCT. THIS LIMITATION IS CUMULATIVE AND WILL NOT BE INCREASED BY THE EXISTENCE OF MORE THAN ONE INCIDENT OR • network-line transients if the Connected Equipment was not properly connected to or was not directly connected to a Belkin product that secure and cannot be hacked; or • replace the product with a reasonably available equivalent new or refurbished Belkin, Linksys or WeMo product; or CLAIM. THE FOREGOING LIMITATIONS WILL APPLY EVEN IF ANY WARRANTY OR REMEDY PROVIDED FAILS OF ITS ESSENTIAL PURPOSE. offers network-line transient protection. • refund you the purchase price of the product, minus any rebates and discounts. • that a third-party service the product or Connected Equipment needs will always be available. NOTHING IN THIS SECTION SHALL LIMIT THE LIABILITY OF BELKIN IN RELATION TO DEATH OR BODILY INJURIES. RELEASE DATE: 12/12/2018 THE WARRANTIES AND REMEDIES SET OUT IN THIS AGREEMENT ARE EXCLUSIVE, AND, TO THE EXTENT PERMITTED BY LAW, IN LIEU damage (we may request that you send us photographs of the damaged Connected Equipment and the site where the damage occurred, or we FCC Statement OF ALL OTHERS ORAL OR WRITTEN, EXPRESS OR IMPLIED. SOME JURISDICTIONS DO NOT ALLOW THE EXCLUSION OR LIMITATION OF may ask to examine the site where the damage occurred, to help us validate your claim); and the date of the Occurrence. DECLARATION OF CONFORMITY WITH FCC RULES FOR ELECTROMAGNETIC COMPATIBILITY IMPLIED WARRANTIES OR OF LIABILITY FOR INCIDENTAL OR CONSEQUENTIAL DAMAGES, SO THE FOREGOING LIMITATIONS MAY NOT APPLY TO YOU. What happens when I return my product or Connected Equipment? We, Belkin International, Inc., of 12045 E. Waterfront Drive, Playa Vista, CA 90094, Tel: +1 (310) 751 5100 declare under our sole responsibility that the product F7U085, to which this declaration relates, complies with Part 15 of the FCC Rules. Operation is subject to the following If any term is held to be illegal or unenforceable, the legality or enforceability of the remaining terms shall not be affected or impaired. Defective products covered by the Product Warranty will be replaced without charge with the same product or an equivalent product of equal two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including or greater value, or Belkin will provide you with a refund of the purchase price of the product, minus any rebates and discounts. The remedy interference that may cause undesired operation. BELKIN TECHNICAL AND WARRANTY SUPPORT INFORMATION offered will be determined by Belkin in its sole discretion. Federal Communications Commission Interference Statement HOW DO I GET HELP? In relation to damaged Connected Equipment covered by the Connected Equipment Warranty, Belkin will pay the reasonable costs of repair This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These as assessed by Belkin at it discretion, replace the Connected Equipment with a reasonably available equivalent new or refurbished Connected limits are designed to provide reasonable protection against harmful interference in a residential installation. If you have a question about your product or experience a problem with it, please go to http://www.belkin.com/support or Equipment (engaging the repair facility and negotiating and settling the cost of repair), or refund the fair market value as reasonably assessed http://support.linksys.com. You will find lots of online support tools and information to help you with your product. by Belkin at its sole discretion. This equipment generates, uses, and can radiate radio frequency energy, and if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. What should I do if my product is defective? We can only ship replacement or repaired products to locations in the country where the original product was purchased. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and DIELINE: on, the user is encouraged to try and correct the interference by one or more of the following measures: You always have the option to return the product to the original seller if you have a problem. You can make a claim based on this warranty or Belkin may need to delete all or part of your data to repair or replace your product. Belkin may also install software updates as part of • Reorient or relocate the receiving antenna. any consumer laws that apply to you. warranty service. PLEASE MAKE SURE THAT YOU BACK UP ALL OF YOUR DATA ON THE PRODUCT BEFORE SENDING IT IN FOR REPAIR OR • Increase the distance between the equipment and the receiver. REPLACEMENT. BELKIN IS NOT RESPONSIBLE FOR ANY LOSS OF DATA OR SOFTWARE DURING WARRANTY SERVICE. • Connect the equipment to an outlet on a circuit different from that to which the receiver is connected. You can also make a claim under this warranty or local consumer laws by contacting Linksys or Belkin Technical Support. To find out how to • Consult the dealer or an experienced radio/TV technician for help. contact us, click the “Contact Us” link on the home page of http://Linksys.com or http://www.belkin.com. If you are located outside the United Replacements not covered under warranty or your rights under consumer law may be refused by place of purchase, or may be subject to charge. States, you will need to choose your region/location first: FCC Caution: Any changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority Technical support to operate this equipment. For Linksys.com: Intermediate http://www.linksys.com/us/change-region/ This warranty is not a service or support contract. Details on our technical support offerings and policies (including any applicable fees) can Radiation Exposure Statement: be found at http://www.belkin.com/support or http://support.linksys.com. This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. End users must follow the specific For Belkin.com: operating instructions for satisfying RF exposure compliance. To maintain compliance with FCC RF exposure compliance requirements, please http://www.belkin.com/us/ - Click the “Change Region” link at the bottom of the website and select your location Belkin provides many different options to support you. Please click on or go to the appropriate website below for more details. Please make follow operation instructions as documented in this manual. This equipment should be installed and operated with a minimum distance of 20 sure to change to your local country if necessary. cm between the radiator and your body. If I believe my product is defective and covered by the Product Warranty or the Connected Equipment Warranty, what do I need to do? • Belkin and WeMo Products: http://www.belkin.com/support • Linksys Products: http://support.linksys.com IMPORTANT NOTE: Innovation, Science and Economic Development Canada Statement You will need to contact Technical Support for your region at the links above. So that we can help you, you will need to give us some information when you contact us: Along with this warranty, Belkin provides Complimentary Assisted Technical Support for the Warranty Period to get your hardware up and This device complies with RSS-216 of the Industry Canada Rules. Operation is subject to the following two conditions: running. Complimentary Assisted Technical Support includes technical support (by phone) and live chat (through your computer). At this time, 1) This device may not cause interference, and live chat is only available in certain countries. Please visit our websites (indicated above) in your local area for details. 2) This device must accept any interference, including interference that may cause undesired operation of the device. • your product model, hardware revision and serial number; • the name of your Internet Service Provider (ISP); and For additional support beyond the Complimentary Assisted Technical Support period or for assistance on advanced features beyond basic Radiation Exposure Statement: • proof that you purchased the product, with the date of the purchase shown and place where it was purchased. WE WILL ALWAYS NEED A support, please contact our Technical Support team to learn more about how we can help you get the most out of your product. Please note DATED PROOF OF ORIGINAL PURCHASE TO PROCESS WARRANTY CLAIMS. This equipment complies with IC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated that you may be assessed a fee to speak with our technician if you contact us outside the Complimentary Assisted Technical Support period. with a minimum distance of 20cm between the radiator and your body. Sometimes we will need you to send the product or Connected Equipment back to us so that we can fix or replace it. If we ask you to return Additional information on some of our Premium Support Offerings can be found at: your product to us by post, you will be given a Return Materials Authorization (RMA) number and we’ll tell you where to send the product and/ Innovation, Science and Economic Development Canada Statement: or Connected Equipment. You will need to make sure the product and/or Connected Equipment is properly packaged and shipped, and you will Linksys Networking Products – This digital apparatus complies with CAN ICES-3(B)/NMB-3 (B). be responsible for the costs of returning your product and/or Connected Equipment to us. We need to identify your product and/or Connected http://www.linksys.com/us/premium-support/ Equipment when it reaches us, so you’ll need to include the RMA number AND a copy of your dated proof of original purchase (please keep the Belkin and WeMo Networking Products – original) with the returned product and/or Connected Equipment. We also recommend that you send the package by registered and insured mail or http://www.belkin.com/us/belkin-premium-support/ Belkin International, Inc. Los Angeles, CA 90094, USA by overnight courier to protect the package while it is in transit. If Belkin determines, in its sole discretion, that it is impractical to ship the damaged Please Note: Some of these offerings may not be offered in your country. Connected Equipment to Belkin, Belkin may designate, in its sole discretion, an equipment repair facility to inspect and estimate the cost to repair such Connected Equipment. In that case, Belkin reserves the right to negotiate the cost of repairs. The cost, if any, of shipping the Connected Belkin Tech Support: www.belkin.com/support Telephone support may not be available where you live and may be subject to charge. Equipment to such repair facility and of such estimate shall be borne solely by the original end-user purchaser. Designed in California. Assembled in China. If you are making a claim in respect of your damaged Connected Equipment, you must do so within fifteen (15) days from the date of the belkin.com Occurrence. So that we can process your claim expeditiously, we will need the following information in addition to the information described above when you contact us: description of all the equipment that was connected to the product at the time of the Occurrence, including name and model number; purchase of the damaged Connected Equipment; description of the damaged Connected Equipment and the extent of 8820-02841 Rev. A00 Front 821/32 [220.218] 411/32 [110.109] Back 33/4 [95.250] 221/2 [571.500] THIS DOCUMENT & THE INFORMATION IN IT ARE THE CONFIDENTIAL PROPERTY OF BELKIN INTERNATIONAL AND MUST NOT BE COPIED, REPRODUCED OR USED IN ANY MANNER WITHOUT THE WRITTEN CONSENT OF BELKIN CORPORATION. PRINT SPECS: IT MUST BE RETURNED UPON REQUEST Color Plates: Finish: Notes: DO NOT PRINT DIE LINES, PRINTERS NOTES


Document Created: 2019-02-26 06:57:33
Document Modified: 2019-02-26 06:57:33
© 2025 FCC.report
This site is not affiliated with or endorsed by the FCC